Answer:
CaF2 + Li2SO4 -> CaSO4 + 2LiF
Explanation:
When balancing equations that are not in acidic or basic solutions, you can not add extra compounds or elements to make both sides equal. In order to balance you need to change how many moles that are in the equation. Since the number of mols is equivalent to the amount of atoms that are present. Think of 3/4 being the same as 6/8 but looking at 3/4 is easier to understand.
In this chemical equation there is the same amount of Ca, S atoms, and Oxygen atoms. (You will learn later that SO4 is a polyatomic ion but that doesn’t matter in this equation). The only difference is that there is two Flourine (F) and two Lithiums (Li). This problem makes it easier because the Lithium and Flourine separate from their reactant compounds and form together as a product so you only need to focus on that compound in the products. Multiplying the entire compound by two will mean that it is the same number of Flourine atoms on both sides and the same number of Lithium atoms.
I hope this helps!
Na2CO3 + CaCl2 -> 2NaCl + CaCO3
138g of CaCl2 react
how many moles of NaCl are made
According to the balanced chemical equation:
Na₂CO₃ + CaCl₂ → 2NaCl + CaCO₃, 2.4892 moles of NaCl are produced, as this is a stoichiometry problem that involves a chemical reaction between two reactants and products.
For every one mole of CaCl₂, two moles of NaCl are produced. So, first the number of moles of CaCl₂ is calculated in 138 g of CaCl₂,
Molar mass of CaCl₂ = 40.08 g/mol + 2(35.45 g/mol) = 110.98 g/mol
Number of moles of CaCl₂= 138 g / 110.98 g/mol = 1.2446 mol
Since the mole ratio of CaCl₂ to NaCl is 1:2, it is known that twice as many moles of NaCl are produced as moles of CaCl₂ used.
Therefore, the number of moles of NaCl produced is:
Number of moles of NaCl = 2 x 1.2446 mol = 2.4892 mol
Learn more about the moles here.
https://brainly.com/question/15524968
#SPJ1
Which letter represents the reactants in this reaction?
Which letter represents the products in this reaction?
Which letter represents the activated complex (transition state) in this reaction?
Which letter represents the activation energy in this reaction?
Is this reaction endothermic or exothermic?
Reactants are the initial substances in a reaction that go through a chemical transformation to create a product.
Thus, Only in the presence of favourable conditions will reactants undergo chemical reactions. Many reactions occur during the cooking of gumbo, but I'll focus on one of the first ones to highlight a favourable circumstance: the caramelization of onions.
Our taste senses cannot perceive the big sug1ar molecules found in raw onions. To release the sweet flavour of onions, these big sugars must be heated to break down into smaller reactants.
The pyrolysis of sugars is the technical term for this procedure. The ideal circumstance necessary for onions to caramelize is products.
Thus, Reactants are the initial substances in a reaction that go through a chemical transformation to create a product.
Learn more about Products, refer to the link:
https://brainly.com/question/31859289
#SPJ1
Use the table of molar masses to answer the question.
Element Molar Mass (g/mol)
silicon
oxygen
28.09
O 6.022 x 1023
O2.049 × 1023
O 1.503 x 1023
O 1.251 x 1023
16.00
How many molecules of silicon dioxide (SiO₂) are there in a 15-gram sample?
(
The number of the Molecules by the use of the Avogadro's number is 1.503 x 10^23.
What is Avogadro's number?The Avogadro's number can be able to tell the number of molecvule sthat we have in one mole the subtance.
We have to use the Avogadro's number and apply it in the solution of the question that we have at hand here s we can see in the problem that follows;
Number of moles of SiO2 = 15 g/60 g/mol
= 0.25 moles
If 1 mole of the SiO2 contains 6.02 * 10^23 molecules
0.25 moles of SiO2 will contain 0.25 * 6.02 * 10^23/1
= 1.503 x 10^23
Learn more about Avogadro's number:https://brainly.com/question/11907018
#SPJ1
what is empirical formula ?Meaning of empirical formula
Answer: empirical formula of any compound is the simplest proportion of elements in that compound (i.e. the composition of elements in compound is in simplest ratio ) .It does not provide actual formula of any compound.
molecular formula=n-factor * empirical formula
molecular formula - C6H12O6 (glucose)
empirical formula - CH2O
C6H12O6 * CH2O
please answer the questions in the picture
If 5.34 g of tricarbon octahydride reacts with 25.2 g of oxygen gas, the limiting reactant is tricarbon octahydride.
8.72168 grams of water is produced.
5.84 grams of excess reactant is left over after the reaction is complete.
The percent yield of water, if 6.98 g of water is actually produced in a laboratory experiment is 80.0459 %.
What is the equation of the combustion reaction?The equation of the combustion reaction is given below:
C₃H₈ + 5 O₂ -----> 3 CO₂ + 4 H₂O
molar masses:
tricarbon octahydride: 44.11 g/mol
oxygen gas: 32 g/mol
water: 18.02 g/mol
carbon dioxide: 44.01 g/mol
Learn more combustion reactions at: https://brainly.com/question/13251946
#SPJ1
Given the balanced equation representing a reaction at 101.3 kPa and 298 K:
N2(g) + 3H2(g) --> 2NH3(g) + 91.8 kJ
Which statement is true about this reaction?
It is exothermic and H equals –91.8 kJ.
It is exothermic and H equals +91.8 kJ.
It is endothermic and H equals –91.8 kJ.
It is endothermic and H equals +91.8 kJ
Considering the definition of endothermic and exothermic reaction and enthalpy of a chemical reaction, the correct answer is the first option: it is exothermic and H equals –91.8 kJ.
Endothermic and exothermic reactionAn endothermic reaction requires energy while an exothermic reaction releases energy.
The enthalpy of a chemical reaction as the heat absorbed or released in a chemical reaction when it occurs at constant pressure. That is, the heat of reaction is the energy that is released or absorbed when chemicals are transformed into a chemical reaction.
Based on the sign of the enthalpy, reactions are classified as endothermic and exothermic:
An exothermic reaction is one whose enthalpy value is negative, that is, the system gives off or releases heat to the surroundings (ΔH < 0).An endothermic reaction is one whose enthalpy value is positive, that is, the system absorbs heat from the surroundings (ΔH > 0).This caseIn the reaction:
N₂(g) + 3 H₂(g) → 2 NH₃(g) + 91.8 kJ
you can see that heat is released.
Finally, the exothermic reaction and the enthalpy value is -91.8 kJ.
Learn more about exothermic reaction:
brainly.com/question/26891888
#SPJ1
A chemistry student collected 0.032l of H2 gas at 1.1 atm pressure and 24C, using the following chemical reaction. How many grams of magnesium must have reacted?
Mg (s) + HCl 9 (aq) becomes H2 9g) + MgCl2 (aq)
We need more information to solve this problem. Specifically, we need to know the volume (or concentration) of HCl used to react with the Mg. Without that information, we cannot determine how many grams of Mg reacted.
Readiness Test: Populations, Communities, and Ecosystems
A food chain refers to the order of events in an ecosystem, where one living organisms eats another organisms and later that organism is consumed by another larger organism. It also explains the feeding pattern.
The food chain is a linear sequence of organisms where the nutrients and energy is transferred from one organism to the other. It begins with the producer and ends with decomposer.
The producers in a food chain consists of all autotrophs like phytoplankton, algae and green plants. It is the producers which utilize the energy from the sun to produce food.
Thus the correct option is B.
To know more about producers, visit;
https://brainly.com/question/23259068
#SPJ1
A piece of iron mass equals 25.0 g at 398 Calvin is placed in a Styrofoam cup containing 25.0 mL of water at 298 K assuming that no heat is lost to the cup or the surroundings what will the final temperature of the water
Final Temperature = 308K
We can set this up as
-Q1 = Q2
Q1 = (iron mass)•(specific heat of iron)•(T2-T1)
[where T2 means final temperature and T1 means initial temperature of the iron]
Q2 = (water mass)•(specific heat of water)•(T2-T3)
[where T3 means inital temperature of the water]
Plug in what you know
Q1 = (25.0g)•(0.44J/g•K)•(T2-398K)
[The internet can tell us the specific heat of iron, and the temperature unit is Kelvin]
Q2 = (25.0g)•(4.18J/g•K)•(T2-298K)
[The internet can tell us the specific heat of water, and 1mL = 1g]
Multiply them all
Q1 = 11(T2) - 4378K
Q2 = 104.5(T2) - 31141K
Use these values in the first equation and solve
-Q1 = Q2
-(11(T2) - 4378K) = 104.5(T2) - 31141K
-11(T2) + 4378K = 104.5(T2) - 31141K
35519K = 115.5(T2)
T2 = 308K
[This is not exact since there was some rounding; but it will be very close]
What happens in a Brønsted-Lowry acid-base reaction?
A proton transfer from one molecule or ion to another., hence option D is the correct answer.
What is a proton?The proton is an electrically charged subatomic particle. They can be present in every element's atomic nucleus. Protons are always accompanied by neutrons in practically every element.
The nucleus of the simplest element, hydrogen, is the sole exception. Hydrogen has only one proton and no neutrons.
A proton is commonly represented by the symbols p or p+. A proton is the nucleus of a hydrogen atom or an H+ ion.
Learn more about protons here:
https://brainly.com/question/1805828
#SPJ1
A muffi n recipe calls for cream of tartar, or potassium
hydrogen tartrate, KHC4H4O6(s). Th e amount of
cream of tartar that is required contains 2.56 × 1023
atoms of carbon. What amount in moles of
potassium hydrogen tartrate is required?
A muffi n recipe calls for cream of tartar, or potassium hydrogen tartrate. The amount of cream of tartar that is required contains 2.56 ×10²³atoms of carbon. 0.42moles of potassium hydrogen tartrate is required
In the Global System of Units (SI), the mole represents the unit of material quantity. How many fundamental entities of a particular substance are present within an object a sample is determined by the quantity of that material. An elementary entity can be a single atom, a molecular structure, an ion, a charged particle pair, or a particle that is subatomic like a proton depending on the makeup of the substance.
For instance, despite the fact that the two substances have different volumes and masses, 10 moles of water because 10 moles of the chemical element mercury both contain the same quantity of stuff, because the mercury comprises exactly one particle for each molecule of water.
mole = 2.56 ×10²³/ 6.022×10²³
= 0.42moles
To know more about mole, here:
https://brainly.com/question/26416088
#SPJ1
What is the minimum concentration of fluoride ions necessary to precipitate CaF2 from a 5.25 x 10-3 M solution of Ca(NO3)2? Ksp of CaF2 = 3.9 x 10-11
The minimum concentration of fluoride ions necessary to precipitate CaF₂ from a 5.25 x 10⁻³ M solution of Ca(NO₃)₂ is 2.02 x 10⁻⁶ M.
Balanced equation for the precipitation of CaF₂ from Ca(NO₃)₂ is:
Ca(NO₃)₂ + 2NaF → CaF₂ + 2NaNO₃
The solubility product expression for CaF₂ is;
Ksp = [Ca²⁺][F⁻]2
We can assume that all of the Ca(NO₃)₂ will dissolve in water since it is a highly soluble salt. Therefore, we need to determine the minimum concentration of fluoride ions ([F⁻]) necessary to exceed the solubility product constant (Ksp) and precipitate CaF₂.
Let x be the concentration of fluoride ions that will react with the calcium ions from the Ca(NO₃)₂ solution to form CaF₂.
According to stoichiometry, the [Ca²⁺] concentration will be equal to the initial concentration of Ca(NO₃)₂, which is 5.25 x 10⁻³ M.
The [F⁻] concentration will be equal to 2x, since two fluoride ions are required for each Ca²⁺ ion to form CaF₂.
Using the Ksp expression, we can write;
Ksp = [Ca²⁺][F⁻]2
Substituting the known values, we get:
3.9 x 10⁻¹¹ = (5.25 x 10⁻³)(2x)²
Solving for x, we get;
x = 2.02 x 10⁻⁶ M
Therefore, the minimum concentration of fluoride ions necessary is 2.02 x 10⁻⁶ M.
To know more about fluoride ions here
https://brainly.com/question/3795082
#SPJ1
Select the correct answer.
What is a nonpolar covalent bond?
A.
a bond between two nonmetal atoms
B.
a bond in which electrons are shared unequally
C.
a bond with ΔEN greater than 0.5
D.
a bond between two atoms that have equal electronegativities
D. a bond between two atoms that have equal electronegativities
Explanation:Covalent bonds involve 2 atoms sharing electrons.
Covalent Bonds
There are 3 types of bonds: metallic, ionic, and covalent. Metallic bonds occur between 2 metals that exist in a "sea of electrons." Ionic bonds have high electronegativity differences and occur between a metal and a nonmetal. Finally, as stated above, covalent bonds occur when 2 atoms share their electrons. Covalent bonds usually occur between two nonmetals. However, there are 2 types of covalent bonds: polar and nonpolar.
Nonpolar Bonds
Both polar and nonpolar bonds involve the sharing of electrons; however, polar bonds share electrons unequally. This is caused by an electronegativity difference greater than 0.5. When two atoms have equal electronegativities, they share the electrons equally. This creates a nonpolar bond.
Balance the following formula equations using the tally method and show your work:
*I have provided the answers for these equations, all you need to do is show your work using the tally method!*
_____ Zn3(PO4)2 + ___2__ AlCl3 → ___3__ ZnCl2 + ___2__ Al(PO4)
___2__ Cr(OH)3 → _____ Cr2O3 + ___3__ H2O
___3__ Na(OH) + _____ H3(PO4) → _____ Na3(PO4) + ___3__ H2O
___2__ Li + ___2__ H2O → ___2__ Li(OH) + ______ H2
The balanced chemical equations using suitable coefficients are Zn₃(PO₄)₂+ 2 AlCl₃ → 3 ZnCl₂ + 2 Al(PO₄),2 Cr(OH)₃ → Cr₂O₃ +3 H₂O,3 NaOH+ H₃PO₄ → Na₃PO₄+ 3 H₂O,2 Li + 2 H₂O → 2 LiOH+ H₂.
Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
The value of K for the reaction below is 6.71 at 465 K.
2NO₂(g) <—>N₂04 (g)
Determine the reaction quotient for a mixture of the two gases in which [NO₂] = 0.0212 M and [N₂O4] = 0.00553 M.
The reaction quotient from the calculation is obtained as 12.3
What is the reaction quotient?
The reaction quotient, Q, is a mathematical expression used in chemistry to predict the direction a chemical reaction will proceed under non-standard conditions.
It is calculated in the same way as the equilibrium constant, K, but uses the concentrations (or partial pressures) of the reactants and products at any given moment during a reaction, rather than at equilibrium.
We already know that the reaction quotient would refer to the non equilibrium conditions. Thus we have that;
Q = [N₂04]/[NO₂]^2
Q = 0.00553/(0.0212)^2
Q = 12.3
Learn more about reaction quotient:https://brainly.com/question/30407595
#SPJ1
A scientist calculated that 150 grams of sodium hydroxide would be created from a specific experiment. Upon performing the experiment, they created 135 grams of sodium hydroxide. what would this experiments percent yield be
The percent yield of a chemical response is the proportion of the real yield to the hypothetical yield, communicated as a rate.
What would this experiments percent yield be?In this case, the hypothetical yield is 150 grams of sodium hydroxide, as calculated by the researcher. The genuine yield is 135 grams of sodium hydroxide, as gotten from the experiment.
The percent yield can be calculated utilizing the equation:
Percent yield = (real yield / hypothetical yield) x 100%
Substituting the values given within the issue, we get:
Percent yield= (135 / 150) x 100%
Percent yield = 0.9 x 100%
Percent yield = 90%
Hence, the percent yield of the experiment is 90%. This implies that 90% of the hypothetical abdicate was gotten within the test.
Learn more about percentage yield from
https://brainly.com/question/26499645
#SPJ1
A balloon is filled with 500.0 mL of helium at a temperature of 27 degrees Celsius and 755 mmHg. What volume in milliliters will it have when it reaches an altitude where the temperature is -33 degree Celsius and the pressure is 0.65 atm?
A balloon is filled with 500.0 mL of helium at a temperature of 27 degrees Celsius and 755 mmHg. 3.4 liters is the volume in milliliters will it have when it reaches an altitude where the temperature is -33 degree Celsius and the pressure is 0.65 atm.
A measurement of three-dimensional space is volume. It is frequently expressed in numerical form using SI-derived units or different imperial or US-standard units (such the gallon, quart, and cubic inch). Volume and length (cubed) have a symbiotic relationship.
The volume much a container is typically thought of as its capacity, not as the amount of space it takes up. In other words, the volume is the volume of fluid (liquid or gas) that the container may hold.
PV/T = constant
(755 x 500) / (27 + 273) = (494 x V) / (-33 + 273)
V = 3396 ml = 3.4 liters
To know more about volume, here:
https://brainly.com/question/1578538
#SPJ1
If you mix 20.0 mL of 0.010 M MgCl2with 20.0 mL of 0.0020 M Na2CO3, will magnesium carbonate, MgCO3, precipitate out from the solution? Explain. Given: Ksp(MgCO3) = 4.0 × 10-5.
If you add AgCl to a 0.10 M solution of NaCl(aq), will the solubility of AgCl be greater than, less than, or equal to its solubility in water? Justify your answer.
How many moles argon gas are found when 2.3 L are isolated from a sample of air at STP? How many grams of argon are in the container?
In the above case, there are 0.103 moles of argon gas as well as 4.12 grams of argon within the holder.
What is the STP?At STP (standard temperature and pressure), 1 mole of any gas involves 22.4 L. Also, the number of moles of argon gas in 2.3 L at STP can be calculated as:
n = V/ V_m
n = 2.3 L / 22.4 L/mol
n = 0.103 moles
To know the mass of argon, we need to make use of its molar mass. Note that the molar mass of argon is said to be 39.95 g/mol. Also , the mass of argon:
m = n × M
m = 0.103 moles × 39.95 g/mol
m = 4.12 g
So, 0.103 moles of argon gas as well as 4.12 grams of argon inside the holder.
Learn more about STP from
https://brainly.com/question/2783971
#SPJ1
A 200 g sample including calcium (Ca), reacts with the excess of hydrochloric acid
(HCl). If 4 g of hydrogen gas (H2) is produced, calculate the Ca% of sample?
Ca + HCl → CaCl2 + H2 (Ca: 40 g/mol and H: 1 g/mol)
A 200 g sample including calcium (Ca), reacts with the excess of hydrochloric acid. If 4 g of hydrogen gas (H2) is produced, 36.3% is mass percent of calcium of sample.
The term mass percent is sometimes referred to as weight percent or w/w%. The total mass of every one of the atoms in a mole that makes up the compound is the molar mass. The total of all the individual percentages ought to equal 100 percent.
Check the last important number for rounding errors to ensure that the percentage add up. The relative amounts of the components in a compound of chemicals are described by their mass percent composition. Mass composition in percent is also referred to as mass percent. The symbol for it is w/w%.
Ca + HCl → CaCl[tex]_2[/tex]+ H[tex]_2[/tex]
moles of calcium = 200/ 40= 5 moles
moles of CaCl[tex]_2[/tex] = 5moles
mass of CaCl[tex]_2[/tex] = 5× 110.98= 550g
mass % of Ca = (200/550g )× 100=36.3%
To know more about mass percent, here:
https://brainly.com/question/5394922
#SPJ1
How many grams of KNO3 should be used to prepare 554.49 mL of a/an 4.85 M solution?
The mass (in grams) of KNO₃ needed to prepare 554.49 mL of 4.85 M KNO₃ solution is 271.69 grams
How do i determine the mass of KNO₃ needed?First, we shall determine the mole of KNO₃. Details below:
Volume = 554.49 mL = 554.49 / 1000 = 0.55449 LMolarity = 4.85 MMole of KNO₃ =?Molarity = Mole / Volume
Cross multiply
Mole = molarity × volume
Mole of KNO₃ = 4.85 × 0.55449
Mole of KNO₃ = 2.69 moles
Finally, we shall determine the mass of KNO₃ needed. Details below:
Mole of KNO₃ = 2.69 molesMolar mass of KNO₃ = 101 g/molMass of KNO₃ = ?Mass = Mole × molar mass
Mass of KNO₃ = 2.69 × 101
Mass of KNO₃ = 271.69 grams
Therefore, the mass of KNO₃ needed to prepare the solution is 271.69 grams
Learn more about mass:
https://brainly.com/question/21940152
#SPJ1
Please help ASAP. Thanks so much!!!
The Keq for the reaction will be 0.89.
The concentration of CO2 Will be 1.67M.
How to calculate the valueThe equilibrium constant (Keq) for the reaction formulated as Keq = [H2O]^2 / ([H2]^2 [O2]), can be evaluated using the given concentrations of hydrogen and oxygen.
After applying both their respective quantities, we arrive at a calculated value of 0.89 for Keq. Moving on, to calculate the concentration of CO2 in the equation H2O (1) + CO2 (g) → H2CO3 (aq), where Keq = [H2CO3] / ([H2O] [CO₂]), having been supplied with a value of Keq equal to 0.15 and H2CO3 being at 0.25M, the rearranged expression reveals that [CO2] equals 1.67 M following basic algebraic substitution.
Learn more about hydrogen on
https://brainly.com/question/24433860
#SPJ1
In a chemical reaction, a catalyst changes the ______.
Select one:
a.
heat of reaction
b.
activation energy of the reaction
c.
potential energy of the products
d.
potential energy of the reactants
Answer:
The Correct answer is B
activation energy of the reaction
or
speeds up the reaction
04.05 Ecological Tolerance Lab Worksheet Student Name: Annalise Clark Time Estimate: 60 minutes Pre-Activity Questions: Use information from the lesson to answer these questions. Answer in complete sentences. What conditions can impact the ecological tolerance of a species? How does island biogeography decrease ecological tolerance? Data: Trial Blue Island Red Island Green Island Yellow island 1 2 3 4 5 Calculations: Calculate the mean value for each island and record it in the data table. To calculate mean, add all the values of the trials and divide the value by the number of trials, which is five. Please show your work. Example: Trial One: 3 beans Trial Two: 4 beans Trial Three: 5 beans Trial Four: 7 beans Trial Five: 2 beans Mean = 3 + 4 + 5 + 7 + 2 = 21/5 = 4.2 Blue Island Red Island Green Island Yellow Island Unless Otherwise Noted All Content © 2021 Florida Virtual School Mean Making Connections: Use your lesson and the results of your activity to answer the questions. Answer questions in complete sentences. Which islands had the most successful migrations? Explain why. How does a successful immigration rate impact the biodiversity of an island? How would the migration of generalist species onto the green island affect specialist species living on the island? Based on your data, which islands would you select as wildlife refuges? Explain your reasoning. Did the lab activity follow the island biogeography model? Why or why not?
The islands with the most successful migration were the blue island and the yellow island with mean values of 4.6 and 4.4. A successful rate of immigration affects the island's biodiversity by introducing new species into the environment, which increases the diversity of organisms living on the island.
Migration of generalist species to a green island would affect specialized species living on the island by competing for resources, as generalist species are better adapted to different environments.
Based on the data, the blue and yellow islands would be the best choice for wildlife refuges because they had the highest mean values and would be more likely to have higher immigration success.
Learn more about ecological tolerance at :
https://brainly.com/question/26471341
#SPJ1
If 5.10 grams Kr occupies volume of 25.7 mL how many grams occupies volume of 42.6 mL
The molarity is an important method which is used to determine the concentration of a solution. So the term molarity is also known as the concentration. Here the grams of Kr which occupies a volume of 42.6 mL is
The molarity of a solution is defined as the number of moles of the solute present per litre of the solution. Its unit is mol L⁻¹ and it is essential to calculate the concentration of a binary solution.
Here M₁V₁ = M₂V₂
M₂ = M₁V₁ / V₂
25.7 mL = 0.0257 L
42.6 mL = 0.0426 L
M₂ = 5.10 × 0.0257 / 0.0426 = 3.076 g
To know more about molarity, visit;
https://brainly.com/question/16727614
#SPJ1
The solubility of lead(II) chloride, PbCl2, is 10.85 g/L. Calculate the solubility product for PbCl2.
Which salt, copper(I) bromide [CuBr, Ksp = 4.2 × 10-8] or lead(II) iodide [PbI2, Ksp = 1.4 × 10-8], is more soluble in water in terms of molarity? Justify your answer.
The solubility product of PbCl₂ is 2.374 x 10⁻⁴.
Copper bromide is more soluble than lead iodide.
The maximum amount of solute that can dissolve in a known quantity of solvent at a certain temperature is its Solubility. This is the property that allows things like sugar molecules to dissolve in a cup of coffee. Water is known as a “universal solvent” because it can dissolve most substances but there are a few exceptions. The solubilty of a substance depends upon its Ksp ( solubility product) value.
Given,
Solubility in g/L = 10.85
In moles/L = 10.85 ÷ 278
= 0.03901 moles/ L
Ksp = [Pb²⁺] [2Cl⁻]²
= (0.03901) (2 × 0.03901)²
= 2.374 x 10⁻⁴
Ksp is a measure of solubility of a compound in water. The higher the Ksp, the more soluble the compound is. Thus, Ksp of copper bromide is greater than that of lead iodide and therefore, it is more soluble in water.
Learn more about Solubility, here:
https://brainly.com/question/28170449
#SPJ1
Determine how many moles of unknown gas are in a 5 liter container at 1 atm and 0 °C. Answer with two decimal places. R=.08206 L*atm/K*mol
To determine the number of moles of gas in a 5 L container at 1 atm and 0°C, one will use the ideal gas law: PV = nRT. After solving for n,
n = (1 atm ×5 L) / (0.08206 L.atm/K.mol ×273.15 K)
n = 0.206 mol
Therefore, there are 0.21 moles of gas in the 5 L container at 1 atm and 0°C.
The ideal gas law is an equation that describes the behavior of gases under certain conditions. It states that the product of pressure and volume of a gas is directly proportional to the number of moles of gas, the gas constant, and the absolute temperature of the gas. The ideal gas law is represented by the equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the absolute temperature in Kelvin.
Learn more about the ideal gas here.
https://brainly.com/question/28984161
#SPJ1
I WILL GIVE 35 POINTS TO THOSE WHO ANSWER THIS QUESTION RIGHT NOOOO SCAMS PLEASE
The number of mole of Ba₃(PO₄)₂ produced from 3.54 L of 0.373 M BaCl₂ is 0.44 mole
How do i determine the mole of Ba₃(PO₄)₂ produced?We'll begin our calculation by obtaining the mole of BaCl₂ in 3.54 L of 0.373 M BaCl₂. This is shown below:
Volume = 3.54 LMolarity = 0.373 MMole of BaCl₂ =?Mole = molarity × volume
Mole of BaCl₂ = 0.373 × 3.54
Mole of BaCl₂ = 1.32 mole
Finally, we can determine the number of mole of Ba₃(PO₄)₂ produced from the reaction. This is illustrated below:
Balanced equation for the reaction:
3BaCl₂ + 2H₃PO₄ -> Ba₃(PO₄)₂ + 6HCl
From the balanced equation above,
3 moles of BaCl₂ reacted to produce 1 mole of Ba₃(PO₄)₂
Therefore,
1.32 mole of BaCl₂ will react to produce = 1.32 / 3 = 0.44 mole of Ba₃(PO₄)₂
Thus, we can conclude from the calculation made above that the number of mole of Ba₃(PO₄)₂ produced is 0.44 mole
Learn more about mole produced:
https://brainly.com/question/13375719
#SPJ1
Why might particles collide, but a chemical reaction not occur?
The collision did not occur with enough energy to form the activated complex
The collision occurred at the wrong angle
Particles will react every time they collide
A catalyst was present
The temperature is too high, so particles aren't moving fast enough
Answer:
A reaction will not take place unless the particles collide with a certain minimum energy called the activation energy of the reaction.
Help quick with number 17
The partial pressure of O₂ is 0.954 atm
The moles O₂ that formed is 0.000859 moles
The mass of NaNO₃ that reacted is 0.146 g.
What is Dalton's law of partial pressures?The balanced chemical equation for the reaction is given below:
2 NaNO₃ (s) → 2 NaNO2 (s) + O₂(g)Mole ratio of NaNO₃ to O₂ is 2 : 1
From Dalton's Law of partial pressures:
The partial pressure of O₂ = Total pressure - Partial pressure of water vapor
The partial pressure of O₂ = (0.98 - 0.026) atm
The partial pressure of O₂ is 0.954 atm
b. From the ideal gas law:
PV = nRT
where;
P is pressure = 0.954 atmV is volume = 0.0230 Ln is the number of molesR is molar gas constant = 0.0821 L.atm/mol/KT is the temperature in Kelvin = 295.15 KSolving for n
n = PV/RT
n = (0.954 * 0.0230)/(0.0821 * 295.15)
n = 0.000859 moles
Moles of O₂ formed = 0.000859 moles
c. The mass of NaNO₃ that reacted is calculated using the formula below:
mass NaNO₃ = moles NaNO₃ x molar mass NaNO₃molar mass NaNO = 84.99 g/mol
moles of NaNO₃ = 0.000859 moles * 2
moles of NaNO₃ = 0.001718 moles
Solving for the mass NaNO₃ that reacted;
mass NaNO₃ that reacted = 0.001718 * 84.99
mass NaNO₃ that reacted = 0.146 g
Learn more about Dalton's law of partial pressures at: https://brainly.com/question/29588220
#SPJ1