Answer: 2Al+6HCl→2AlCl3+3H22Al+6HCl → 2AlCl3 + 3H2
Explanation:
the number of neutrons in the nucleus of an atom can be determined by
Answer:
To calculate the number of neutrons, subtract the atomic number (which equals the number of protons) from the mass number.
hope this helps☆☆☆
help<3
If a solid object is taken from Earth far into space, which of the following measurements of the object
will change the most?
A. density
B. mass
C. volume
D. weight
Answer:
D. weight
[tex] \: [/tex]
If a solid object is taken from Earth far into space, which of the following measurements of the object will change the most?
A. density
B. mass
C. volume
D. weight
Answer:-option D. weight
Explanation:-Because the gravity of the planet/object changes, the weight of the object changes when you move it away from the earth or place it on another planet.
However, the mass of the object remains the same regardless of whether it is on Earth or outer space.
in a battery that uses a licoo2 cathode approximately 50% of the lithium migrates from the cathode to the anode on charging. in a battery that uses a limn2o4 cathode what fraction of the lithium in limn2o4 would need to migrate out of the cathode to deliver the same amount of lithium to the graphite anode?
Answer:
92.4%
Explanation:
Assume 100g of the cathode material. The LiCoO2 cathode has 7.09 g of Li. If half of Li migrates during charging, 3.55g Li migrates. 100g of the LiMn2O4 cathode contain 3.84g of Li. The fraction of lithium in LiMn2O4 that would need to migrate out of the cathode to deliver the same amount of lithium to the graphite anode:
(3.55g/ 3.84g ) * 100% = 92.4%
From electrolysis, 92.4% would need to migrate out of the cathode to deliver the same amount of lithium to the graphite anode.
What is electrolysis?
Electrolysis is a technique that uses direct electric current (DC) to drive an otherwise non-spontaneous chemical reaction. Electrolysis is commercially important as a stage in the separation of elements from naturally occurring sources such as ores using an electrolytic cell. The voltage that is needed for electrolysis to occur is called the decomposition potential.
Assume 100 g of the cathode material. The LiCoO₂ cathode has 7.09 g of Li. If half of Li migrates during charging, 3.55 g Li migrates. 100 g of the LiMn₂O₄cathode contain 3.84 g of Li. The fraction of lithium in LiMn₂O₄ that would need to migrate out of the cathode to deliver the same amount of lithium to the graphite anode:(3.55 g/ 3.84 g ) × 100% = 92.4%
Learn more about electrolysis,here:
https://brainly.com/question/12054569
#SPJ2
Excited hydrogen atoms emit light in the ultraviolet at 2.47x1015Hz. What is the
energy of a single photon with this frequency?
The energy of a single photon of this frequency is 1.638 × 10⁻¹⁸ J
Using Planck's equation, the energy of the photon E = hf where h = Planck's constant = 6.63 × 10⁻³⁴ Js and f = frequency of ultraviolet light = 2.47 × 10⁻¹⁵ Hz.
Substituting the values of the variables into the equation, we have
E = hf
E = 6.63 × 10⁻³⁴ Js × 2.47 × 10¹⁵ Hz.
E = 16.3761 × 10⁻¹⁹ J
E = 1.63761 × 10⁻¹⁸ J
E ≅ 1.638 × 10⁻¹⁸ J
So, the energy of a single photon of this frequency is 1.638 × 10⁻¹⁸ J
Learn more about energy of a photon here:
https://brainly.com/question/15946945
Increase in pressure affects which of the following states in chemical reactions? A Solid only B Liquid only С Gas only D All of the above
Answer:
D All of the above
[tex] \: [/tex]
Why is lead(II) nitrate: “Pb(NO3)2” and not “Pb3NO2”?
Just a bit confused because it looks a bit funny compared to how I learned how to write compounds.
Explanation:
this is because the combining capacity, ie valency, of Pb is 2 of which NO3 is 1. So, when they will combine by cross method, the compound become Pb(NO3)2 (lead II nitrate).
hope this helps you.
How are the forces acting on an airplanes flying similar to the forces acting on a boat moving through water?
Answer: The four forces acting on an aircraft in straight-and-level, unaccelerated flight are thrust, drag, lift, and weight.
Explanation:
An increase in which property would cause an electromagnetic wave's energy
to increase?
A. Wavelength
B. Mass
C. Frequency
D. Speed
SUBMIT
What are chemicals that speed up the rate of chemical change?
Catalysts speed up chemical reactions / changes.
Hope this helps!
How many grams or H20 are produced if 25 grams of HCl are used?
Answer:
15.1 grams
Explanation:
Answer:
I did some research and found some things here, its another sight sort of like brainly. Hopefully this helps!
Explanation:
https://socratic.org/questions/how-many-grams-of-potassium-chloride-are-produced-if-25-0g-of-potassium-chlorate
___is a measure of the change in velocity of a
moving object.
THIS IS URGENT ! Please fill in the blank
. What were the factors responsible for the change of dead organic matter into fossil fuels?
What effect does salt have on a marshmallow?
Answer:
The original marshmallow was named for the inclusion of marshmallow root in the recipe. The roots and leaves of the marshmallow plant contain mucilage, a slimy-textured demulcent best known for its use as a homeopathic cough suppressant. Marshmallow root is considered to be soothing and mildly antimicrobial. It has long been used as an herbal treatment for minor digestive issues and skin irritations, although its use in the creation of its namesake confection has long since fallen by the wayside.
Explanation:
So basically salt makes it strecthy! Please mark brainliest!!
Count the following atoms
NEED ANSWER ASAP
what viral components might serve as good targets for the design of antiviral chemicals?
If you begin with a saturated solution of sugar dissolved in water, and then you heat the solution, what type of solution will result
After beginning the experiment with a saturated solution, then increasing the heat, we will be left with an unsaturated solution.
To obtain the saturated solution, we must dissolve sugar in the water. We can say that the solution has become saturated when the solution is no longer able to dissolve more sugar. It has reached its capacity for the solute that it can dissolve in these conditions.
However, the temperature of a solution has an effect on the dissolving limit of the solution. That is, when a solution is heated it becomes able to dissolve more solute. Therefore, if we were to heat a saturated solution, it will be able to dissolve more solute and therefore will no longer be at its limit, meaning it is no longer a saturated solution. It has become unsaturated.
To learn more visit:
https://brainly.com/question/3035198?referrer=searchResults
can someone send the working and answer for this question with formulas used and all
Answer:
its letter d ..................................
the atom is one of the basic units of matter. which part of the atom mostly determines the size of the atom?
Answer:
nucleus
Explanation:
The nucleus contains the majority of an atom's mass because protons and neutrons are much heavier than electrons, whereas electrons occupy almost all of an atom's volume
Which of the following requires the most input of energy?
Ovaporizing a substance
O melting a substance
O decreasing the temperature of the substance by 1°C
O raising the temperature of the substance by 1°C
Answer:
D ✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔
What is responsible for the unusual chemical properties of water?
Answer:
hydrogen bonds
Explanation:
pls choose it as brianliest
The unusual chemical properties of water is due to its polar covalent bond.
What is polar covalent bond ?When atoms with differing electronegativities are shared between two atoms in such a covalent link, the result would be a polar covalent bond.
What is water ?Water is a kind of mixture of hydrogen and oxygen . Its chemical formula will be [tex]H_{2}O[/tex].
Along with its polar covalent connections, water displays a variety of interesting features. Because oxygen has a higher electronegativity than hydrogen, electron pairs were drawn closer to the oxygen atom, causing it to be partially negatively charged. As a result, both hydrogen atoms acquire a slightly positive charge.
Therefore, polar covalent bond will be responsible for unusual chemical properties of water.
To know more about polar covalent bond and water.
https://brainly.com/question/10777799
#SPJ2
Write the electron configuration for the metal in group 5A and the alkali metal in period 2
Will give brainliest if answered fast :)
Answer:
metal in group 5A is bismuth
electronic configuration : 1s^2 2s^2 2p^6 3s^2 3p^6 3d^10 4s^2 4p^6 4d^10 5s^2 5p^6 4f^14 5d^10 6s^2 6p3
alkali metal in period 2 is lithium
1s^2 2s^ 1
Explanation:
Find the percent by mass concentration if the solution was prepared by dissolving 25.0 g of sugar into 100 g of water.
Answer:
25%
Explanation:
Percent by mass is looking at the percentage of mass within a a solution. So since there's 100g of water and 25 grams of sugar, you divide 25 by 100 to get the ratio. Then multiply by 100 to get the percentage.
How did the industrial revolution contribute to global climate change
Answer:humans have put ridiculous amounts of carbon dioxide into the atmosphereThese events are linked to the mass burning of fossil fuels to meet an increase in human demand
So the answer is True
Explanation:
Burning fossil fuels, such as coal and oil, has increased the quantity of greenhouse gases in our atmosphere since the Industrial Revolution began around 1750.
What is atmosphere?Atmosphere is defined as a layer of gas that surrounds a planet and is kept there by the gravitational pull of the planetary body. The atmosphere of Earth includes five primary layers and a number of minor ones.
Industrial revolution is defined as the transition of an economy based on agriculture and handicrafts to one driven by industry and machine production. The causes of industrial revolution are the advent of capitalism, European imperialism, efforts to mine coal, and the effects of the Agricultural Revolution are some of the factors that historians have recognized as contributing to the Industrial Revolution.
Thus, burning fossil fuels, such as coal and oil, has increased the quantity of greenhouse gases in our atmosphere since the Industrial Revolution began around 1750.
To learn more about atmosphere, refer to the link below:
https://brainly.com/question/26767532
#SPJ2
What is a single layer of graphite called
Asking for GCSE Chemistry
Answer:
GRAPHENE is a single layer of graphite
Explanation:
each carbon atom bonded to 3 other carbon atoms forming a hexagonal lattice
8)
What mass of hydrogen is needed to react with 32 g of copper oxide?
CuO + H2 → Cu + H2O
Answer:
1.22gram of hydrogen is needed to react
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 0.40 g mass of hydrogen is needed to react with 32 g of copper oxide.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
Mathematically,
CuO + H[tex]_2[/tex]→ Cu + H[tex]_2[/tex]O
mole of copper oxide= 32 /79.54
=0.40 mole
The mole ratio between copper oxide and hydrogen is 1:1
mole of hydrogen= 0.40 mole
mass of hydrogen = 0.40 mole×1g/mol
= 0.40 g
Therefore, 0.40 g mass of hydrogen is needed to react with 32 g of copper oxide.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
The following balanced equation shows the formation of water. 2H2 O2 → 2H2O How many moles of oxygen (O2) are required to react completely with 1. 67 mol H2? 0. 835 mol O2 1. 67 mol O2 3. 34 mol O2.
Answer:
CO2 carbon dioxide emissions
H20 mental breakdown
02 is form of a kind
answer is acid + alkaline equal to salt and water
Please help I will Mark Branlist
please justify and explain aswell
A. ionic (donates an electron to the other atom in the bond)
B. covalent (electrons are shared equally)
C. polar (unequal electronegativity)
hope this helps!
A clear liquid in an open container is allowed to evaporate. After three days, a solid is left in the container. Was the clear
liquid an element, a compound, or a mixture?
The liquid did not chemically bond after 3 days, therefor it is a mixture.
Hope this helps!
What is Al and O's balanced compound?
Answer:
Aluminum generally forms Al3+ ions. Oxygen generally forms O2− ions. So when the metal and the non-metal make music together they form a neutral compound, i.e. Al2O3 (i.e. 2×3−3×2=0) . The ionic bonding is so strong (due to charge magnitude) in this material that it is reasonably insoluble.
Explanation:
how many moles of oxygen are in 20 grams of oxygen
Answer:
0.625
Explanation:
If you are referring the O2, first you need to get the relative mass of it. You can see the O's is around 16. but this is O2,you need to multiple it.
16×2=32
We get the equation n=m/M where m is for gram
20/32=0.625mol