Based on illustrations of magnetic field lines, where could an object be placed so it would not experience a magnetic force?
halfway between the like poles of two magnets, because the field lines bend away and do not enter this area
halfway between the opposite poles of two magnets, because the field lines are the closest together
above the middle of a bar magnet, because the magnetic field lines are only found around the sides of the magnet
above a pole of a bar magnet, because the magnetic field lines either go in or go out at the end

Answers

Answer 1

Answer:

(a) halfway between the like poles of two magnets, because the field lines bend away and do not enter this area

Explanation:

Got it correct on the test.

Answer 2

Answer:

(a) halfway between the like poles of two magnets, because the field lines bend away and do not enter this area

Explanation:


Related Questions

An Alaskan rescue plane traveling 46 m/s drops a package of emergency rations from a height of 101 m to a stranded party of explorers. The acceleration of gravity is 9.8 m/s^2. Where does the package strike the ground relative to the point directly below where it was released? Answer in units of m.

Answers

Answer:

The package strikes 207 m at the ground relative to the point.

Explanation:

Given that,

Speed = 46 m/s

Height = 101 m

Acceleration = 9.8 m/s²

We need to calculate the time

Using equation of motion

[tex]s=ut+\dfrac{1}{2}gt^2[/tex]

Put the value in the equation

[tex]101=0+\dfrac{1}{2}\times9.8\times t^2[/tex]

[tex]t=\sqrt{\dfrac{2\times101}{9.8}}[/tex]

[tex]t=4.5\ sec[/tex]

We need to calculate the distance where the package strikes

Using formula of distance

[tex]x=vt[/tex]

Put the value into the formula

[tex]x=46\times4.5[/tex]

[tex]x=207\ m[/tex]

Hence, The package strikes 207 m at the ground relative to the point.

An escaped convict runs 1.70 km due East of the prison. He then runs due North to a friend's house. If the magnitude of the convict's total displacement vector is 2.50 km, what is the direction of his total displacement vector with respect to due East?

Answers

Answer:

The right approach will be "47° north of east".

Explanation:

The given values are:

East of prison

= 1.70 km

Displacement vector

= 2.50 km

Now,

The direction will be:

⇒  [tex]Cos \ \theta =\frac{1.7}{2.5}[/tex]

⇒            [tex]=0.68[/tex]

⇒         [tex]\theta=47.16^{\circ}[/tex]

i,e.,       [tex]\theta = 47^{\circ}[/tex] (north of east)

The direction of his total displacement vector with respect to due East is 1.83km

Resultant vector

Given the following parameters

Distance ran through east = 1.70km

displacement = 2.50km

Required

Total displacement vector with respect to due north

Using the expression below;

d = √x² + y²

2.5² = 1.7² + y²

y² = 2.5² -  1.7²

y² = 3.36

y = 1.83km

Hence the direction of his total displacement vector with respect to due East is 1.83km

Learn more on resultant vector here: https://brainly.com/question/19802988

The density of the Earth is greater than the density of an equal volume of water by _____.

5½ times
3½ times
1½ times
7½ times

Answers

Answer:

I think the second option is correct

please mark me as brainliest

What force is responsible for crushing or collapsing stars?
O nuclear fusion
O gravity
energy
O forces

Answers

Answer:

Explanation:

Gravity is the correct answer

Gravity is the correct answer

The law of conservation of energy tells us

A. that energy can be transformed from one form to another

B. energy cannot be created or destroyed

C. the total amount of energy will remain the same

D. All of the above

Answers

Answer:

it is A

Explanation:

because energy can neither be created nor destroyed - only converted from one form of energy to another.

Water is formed when two hydrogen atoms bond to an oxygen atom. The hydrogen and the oxygen in this example are different

Answers

They both are two different elements.SO the answer is Element

can someone please help me answer this in the next 15 minutes. ill give a brainiest to whoever can help me. tysm if u do!! :))

Answers

Answer: a

Explanation:

Answer: it is a

Explanation: the graph represents the number of speed running and the amount of you add 4 +—0.4 is -0.8! Byee! Plz give me brainliest! Ty! Have a good day!!

1 pts
How can two different nonmetals form a compound?

Answers

Explanation:

Covalent or molecular compounds form when elements share electrons in a covalent bond to form molecules. Molecular compounds are electrically neutral. Ionic compounds are (usually) formed when a metal reacts with a nonmetal (or a polyatomic ion). Covalent compounds are formed when two nonmetals react with each other.

Nonmetals can form compounds through a process called covalent bonding.

Covalent bonding occurs when two nonmetal atoms share electrons to achieve a stable electron configuration. This sharing of electrons allows both atoms to fill their outermost energy levels or achieve a noble gas electron configuration.

When two nonmetal atoms come together to form a compound, their electronegativities play a crucial role. Electronegativity is the ability of an atom to attract electrons toward itself in a chemical bond. If the electronegativities of the two nonmetals are similar, they will have a similar tendency to attract electrons, resulting in a more equal sharing of electrons.

So, nonmetals can form compounds through covalent bonding by sharing electrons. The extent of electron sharing depends on the electronegativity difference between the nonmetals involved, leading to either polar covalent or ionic bonding.

Therefore, nonmetals can form compounds through a process called covalent bonding.

To know more about covalent bonding, click here:

https://brainly.com/question/33425898

#SPJ6

You are in a car moving at 50 mph to the right, from the reference frame of the ground. A truck is next to you moving at 30 mph to the right, also from the reference frame of the ground. Which is true from your reference frame of the car?


a. The truck would appear to stand still.This answer is incorrect.

b. The truck would appear to be moving forward.

c. The truck would appear to be moving backward.

Answers

I would say it would be c .... I can tell u this from personal experience, when Iam driving in a car faster then the truck it appears it is going in reverse but in reality we are just passing the car

Help with this review pls!!

Answers

40 50 60 85 954 746 ity

Answer:

The 2 forces are a Push and a Pull

Mass is the resistance of change in speed or position when adding force.

Weight is the force of gravity

Tension Force is the pulling force transmitted through a string cable or chain. The formula for this is T = mg + ma.

It gives the particle the same acceleration as all those actual forces together as described by the Newton's second law of motion.

An unbalanced force is when there is 2 forces on opposites of an object both are adding force but one side is stronger than the other.

Friction is a force that heats things up. This happens when we rub our hands together and the heat that is generated from the friction makes our hands warmer.

Static friction is what keeps the box from moving without being pushed, and it must be overcome with a sufficient opposing force before the box will move. Kinetic friction (also referred to as dynamic friction) is the force that resists the relative movement of the surfaces once they're in motion.

PHYSICS HELP PLEASE ONE QUESTION 10 POINTS:)

Answers

Case 1 has the greatest strength for the push and pull. Option A is correct.

What is force?

The pushes and pulls the body experiences are referred to as force. It can occasionally be used to alter the body's size, shape, and direction.

Mass times acceleration equals force, according to the definition. Newton is its measure.

The force transmitted through a rope, string, or wire as it is tugged by opposing forces is referred to as the tension force.

Energy is drawn equally from both ends by the tension force, which is exerted along the whole length of the wire.

The tension force is acting in the rope causing greater strength for the push and pull.

Hence, option A ia correct.

To learn more about the force refer to the link;

https://brainly.com/question/26115859

#SPJ1

how do you find displacement

Answers

Answer:

Displacement can be calculated by measuring the final distance away from a point, and then subtracting the initial distance. Displacement is key when determining velocity (which is also a vector). Velocity = displacement/time whereas speed is distance/time. I hope it helped. Please give brainliest

Explanation:


If an object is thrown down with force from the top of a building, at a speed of 20.0 m/s, and it hits the ground with
a speed of 40.0 m/s.

Answers

what is the question lol

Which of the following is true about the speed of light?
A: it is a constant when the light is traveling in a vacuum
B:it speeds up or slows down depending on the observer
C: it’s slowest in a vacuum
D:it varies depending on the color of the light.

Answers

Answer:

C. it’s slowest in a vacuum

Explanation:

When light propagates through a material, it travels slower than the vacuum speed, c.

Answer:

A

Explanation:

I took the test

I need help ASAP. This is for 15 points

Answers

Answer:

Latitude :

runs: east to west

measures : distances north and south of the equator

Longitude :

runs : north to south

measures : the distance east or west of the Prime Meridian

the energy transferred by a force of a moving object

Answers

Answer:

kinetic or mechanical cant remember

Explanation:

Answer:

Hey!!

Kinetic Energy is your answer!

Explanation:

I hope this helped you!

Rock X is released from rest at the top of a cliff is on earth. A short time later, Rock y is released from rest from the same point as rock X. Both rocks fall for several seconds before landing on the ground directly below the cliff. Frictional forces are considered to be negligible. Which of the following graph correctly shows the vertical velocity of rock X as a function of time? Take the positive direction to the upward.​

Answers

Answer:

The graph that correctly shows the vertical velocity is B. since the velocity is negative and increases linearly over time

Explanation:

When an object is dropped from rest its movement is ruled only by the effect of gravity.

The acceleration of gravity [tex]g=9.8\ m/s^2[/tex] makes the object gain speed with a linear relation as shown:

vf = g.t

If we take the positive direction to be upward, then the speed will always be negative since the object will go against the positive direction.

Thus, the graph that correctly shows the vertical velocity is B. since the velocity is negative and increases linearly over time

From the given graphs, only the second graph (option B) started from rest (0) and later increased with time.

The given parameters;

Rock XRock yinitial velocity of Rock X = 0

The final vertical velocity of the rock X after a short time "t" is calculated as follows;

[tex]v_y_f = v_y_i + gt\\\\v_y_f = 0 + 9.8t[/tex]

The vertical velocity of the rock x will increase with time as it moves downwards.

Therefore, we can conclude that, from the given graphs, only the second graph (option B) started from rest (0) and later increased with time.

Learn more here:https://brainly.com/question/24508888

As the cloud passes over the building, a lightning strike occurs and a charge of 0.84C flows through the lightning conductor. The charge flows for 3.5 × 10^-5 s.
Calculate the average current in the lightning conductor during this time. State the formula used in your answer

Answers

Answer:

I=24,000 Amp

Explanation:

Electric Current

Is a measure of the quantity of charge Q flowing by a point in a time period of t.

The standard metric unit for the current is the Ampere, often abbreviated as Amps or A.

It can be calculated as:

[tex]\displaystyle I=\frac{Q}{t}[/tex]

The cloud generates a lightning strike that releases a charge Q=0.84 C during a time [tex]t=3.5\cdot 10^{-5}\ sec[/tex].

The current is of course, not of a constant value, but an average value can be calculated by using the above formula:

[tex]\displaystyle I=\frac{0.84}{3.5\cdot 10^{-5}}[/tex]

[tex]\boxed{I=24,000\ Amp}[/tex]

List 2 examples of physical properties that don't
change if the sample size changes.

Answers

Answer:

Temperature, density

Explanation:

Physical properties of a substance are those properties that do not change the chemical composition of the substance. There are two types of physical properties namely: intensive property and extensive property.

Intensive properties are those physical properties that does not depend on the sample size of the substance involved. Examples of intensive physical properties are temperature, density, boiling point. For example, the size or amount of a substance does not determine the the TEMPERATURE or BOILING POINT of the substance.

Is there work being done when kicking a soccer ball?

Answers

Answer:

Yes.

Explanation:

There is potential energy in your leg that once comes in contact with the ball turns into kinetic energy.

Yes indeed there is work being done when kicking a soccer ball

Both the X- and Y-components of a vector are doubled. Which of the following describes what happens to the resulting Vector?
a) Magnitude increases by √(2
b) Magnitude increases by √(2, and the direction changes
c) Magnitude increases by 2
d) Magnitude increases by 2, and the direction changes

Answers

Answer: C. Magnitude increases by 2

Explanation:

If the magnitudes of X and Y vectors are increased, then the resultant vector will increase by a factor of 2 but the direction does not changes. Hence, option c is correct.

What is a vector ?

A vector is a physical quantity having both magnitude and direction. For example, force, velocity, work done, momentum, velocity etc. are vector quantities. The quantities which does not have direction are called scalar quantity.

The resultant vector R of vectors in X and Y direction can be written as follows:

[tex]\rm R = \sqrt{x^{2} + y^{2}}[/tex]

If the x and y components are doubled to 2x and 2y then the resultant vector becomes,

[tex]\rm R = \sqrt{(2x)^{2} + (2y)^{2}}\\\\ R = \sqrt{4 (x^{2} + y^{2})\\\\\\ R = 2 \sqrt{x^{2} + y^{2} \\ \\ \\ \\[/tex]= 2R

Therefore, the resultant vector will increases by 2 times. However the direction will not change. Hence, option c is correct.

Find more on vectors:

https://brainly.com/question/14447709

#SPJ2

When walking barefoot, Kevin can walk across the grass easily, but when he crosses the paved street, the street is hot and burns his feet. At the beach he walks quickly across the hot sand to the cool water. Why do some substances feel hot to his feet and others do not? Radiation is heat transfer through waves. Specific heat is the amount of energy required to raise the temperature of a substance 1 degree C.​

Answers

because of the radiation

why would it motivate Hollywood to use more realism in special effects?

Answers

Answer:

Explanation:

the search for authenticity in films, motivated Hollywood to use more realism in special effects.

A model rocket is launched from the ground. It starts from rest and accelerates upward at 15.0 m/s2 for 3.00 s. Disregard gravity. What is the V2? b. Then, it has a downward acceleration of -10.0 m/s2 until it reaches its highest point. What is the highest above the ground that the rocket gets? c. What is the TOTAL time in the air?

Answers

Answer:

The final velocity v₂ is 45 m/s

The highest point reached by the rocket is 101.25 m

The total time spent in air by the rocket is 7.5 s

Explanation:

Given;

initial velocity of the rocket, v₁ = 0

final velocity of the rocket, v₂ = ?

upward acceleration of the rocket, a = 15 m/s²

time of acceleration, t = 3 s

The final velocity is given by;

v₂ = v₁ + at

v₂ = 0 + (15 x 3)

v₂ = 45 m/s

The highest point reached by the rocket is given by;

v² = u² + 2ah

where;

u is the initial velocity of rocket when it started decelerating.

thus, u = v₂

v is the final velocity of the rocket at its highest point = 0

0 = v₂² + 2ah

0 = (45)² + (2 x -10 )h

0 = 2025 - 20h

20h = 2025

h = 2025 / 20

h = 101.25 m

Time taken for the rocket to reach its highest point is given by;

h = ut + ¹/₂at²

101.25 = 45t + ¹/₂(-10)t²

101.25 = 45t - 5t²

5t² - 45t + 101.25 = 0

t² - 9t + 20.25 = 0

t = 4.5 s

The total time spent in air by the rocket is given by;

T = upward time + downward time

T = 3 s + 4.5 s

T = 7.5 s

A block of wood has a mass of 8 g and occupies a volume of 10 cm3. What is its density?

Answers

Answer:

0.8 g/cm³

Explanation:

recall that the definition of density is the mass per unit volume of an object.

or mathematically:

density = mass / volume

here we are given that mass = 8 g and volume = 10 cm³

hence,

density = 8 g / 10cm³ = 0.8 g/cm³

The block has a mass of 8 g with a volume of 10 cm³. It density is mass divided by volume that is 0.8 g/cm³.

What is density?

Density of a substance is the measure of  its mass per unit volume. Density is dependent on some other factors beside mass and volume such as bond type, temperature and pressure.

The ratio of density of a substance to the density of water is called its specific gravity. If the substance is denser than water it will sink on water otherwise it will float on it.

The mass of the block of wood = 8 g

volume = 10 cm³

Density = mass / volume

              = 8 g/ 10 cm³

              = 0.8 g/ cm³

Therefore, the density of the wood block is 0.8 g/ cm³.

To find more on density, refer here:

https://brainly.com/question/15164682

#SPJ2

HELPPPPP
Jermaine runs exactly 2 laps around a 400 meter track.

Find displacement.

Answers

Answer:

0

Explanation:

she runs 2 whole laps around a 400 meter track, but she is always ending up back where she started, therefor there is no displacement.

How much heat is released by 38 gram sample of water to freeze

Answers

The heat released = 38 x specific latent heat of ice
approx = 38 x 334 = 12692 Joules

please help! newton's laws. please give a legit answer

Answers

Answer:

yuhhh

Explanation:

get into it

The two factors that determine velocity are....
A: speed and direction
B: direction and distance
C: position and rate
D: distance and mass


please help which one are these . for science class

Answers

Answer:

Explanation:

D Distance and Mass

In the heart, what separates the oxygenated and deoxygenated blood?
A. Ventricle
B. Vessel
C.septum
D.atrium

Answers

Answer:

  C.  septum

Explanation:

The septum is the partition separating the right ventricle from the left ventricle. The right ventricle pumps deoxygenated blood to the lungs, and the left ventricle pumps oxygenated blood to the rest of the body.

Other Questions
Badly need help please answer this write the follow through sentence to each of the following situations. Use modals in your sentences Based on what you learned in the lesson, what might have been a source of income for Puerto Rico in the pastThe export of coffeeThe inland tourismThe production of sugarThe sale of cattle Describe Claire's symptoms. Explain how they were related to metabolism and homeostasis. Sean was at batting practice. He swung 25 times but only hit the ball 15 times. Write the simplified ratio for how many times Sean swung the bat compared to how many times he hit the ball. PLS HELPA. Alternate interior anglesB. Vertical anglesC. Supplementary anglesD. Alternate exterior angles Solve the system of equations. y=4x+5 and y=3x-2, what's the solution If a boomerhing is thrown 10 m in a straight line and returnsexactly to the spot it was thrown what is its displacement? The war in Iraq would be an example of which type of conflict?intergroupinterpersonalintragroupintrapersonalPlz help ASAP !!!! Wellness is the struggle to keep all the components of health at their best possible levels.Please select the best answer from the choices provided.OF One year ago, a tiger cub was 5 feet shorter than its mother. However, it grew 2 feet, and now its mother is only twice its size. How big was the tiger cub one years ago? If (4 + 1) ( + 4) = 2 + + , what is the value of + + ? The world of The Odyssey is all about tradition and custom. Do we see any instances of innovation? How do you think Odysseus would feel about the Internet? Rivera Company has several processing departments. Costs charged to the Assembly Department for November 2020 totaled $2,288,076 as follows. Work in process,November 1Materials $79,000Conversion costs 48,200$127,200Materials added 1,594,520Labor 225,800Overhead 340,556Production records show that 34,600 units were in beginning work in process 30% complete as to conversion costs, 662,700 units were started into production, and 24,100 units were in ending work in process 40% complete as to conversion costs. Materials are entered at the beginning of each process. HELP WILL MARK BRAINLIEST write a speech u would give to the people in ur community on how to keep the environment clean What is the use of the name boxin excel? help me plz thx alot True or false dont lie Provide an example of success according to a person with a fixed mindset and an example of success For a continuous random variable X, P(23 X 66) = 0.25 and P(X > 66) = 0.14. Calculate the following probabilities. (Leave no cells blank - be certain to enter "0" wherever required. Round your answers to 2 decimal places.)