Answer:
Explanation:
The statement "the thermochemical equation represents a physical change" is false.
The given thermochemical equation must represent a chemical change because it involves a change in the chemical composition of the reactants and products. In particular, it describes the condensation of a gas into a liquid, which involves a change in the arrangement of atoms and molecules.
The other statements are true based on the given information:
The pressure for the process is known: This implies that the process is either carried out under constant pressure or the change in volume is negligible.
The internal energy of the surroundings increases: This suggests that the process is endothermic, meaning that energy is absorbed from the surroundings.
The enthalpy change for the gas condensing into a liquid is known: This is implied by the fact that a thermochemical equation is given, which allows us to calculate the enthalpy change for the given reaction.
The enthalpy change is endothermic: This follows from the statement that the internal energy of the surroundings increases, which means that heat is absorbed from the surroundings, making the enthalpy change positive (endothermic).
The sun has a mass that is 333000 greater than earths. Even though the mass of the sun is so great, the moon stays in orbit around the Earth, which of the following best explains why the moon stays in orbit around the Earth.
The moon stays in orbit around the Earth because of the gravitational force between them.
What is the impact of gravitational force on moon?Despite the Sun having a much larger mass than the Earth and the Moon, the gravitational force between the Earth and the Moon is stronger due to their proximity. The gravitational force of the Earth on the Moon is what keeps it in orbit around the Earth.
This is because gravity is proportional to the product of the masses of the two objects and inversely proportional to the square of the distance between them. Although the Sun has a much larger mass than the Earth, it is also much farther away from the Moon, so the gravitational force it exerts on the Moon is much weaker than the gravitational force of the Earth on the Moon.
Therefore, it is the combination of the Moon's velocity and the gravitational force of the Earth that keeps it in orbit around the Earth, despite the much greater mass of the Sun.
Learn more about gravitational force here: https://brainly.com/question/27943482
#SPJ1
if necessary to take off from a slushy runway, the freezing of landing gear mechanisms can be minimized by:
If necessary to take off from a slushy runway, the freezing of landing gear mechanisms can be minimized by reducing the likelihood of the landing gear systems freezing when taking off from a slippery runway.
Landing gear freezing can be reduced if you need to take off from a slick runway by delaying gear withdrawal until you reach cruising altitude. The slush will slow you down, but it will also reduce your traction and increase the likelihood that a wheel may slip if you apply the brakes. If you are concerned about achieving this as you depart, take a taxi back in. Many pilots remove their aircraft wheel pants during the winter.
A slick runway may increase the likelihood of the landing gear systems freezing, jeopardising the flight's safety. If there is a crosswind, the pilot should begin the takeoff roll with full aileron pressure into the wind. For control, the pilot should maintain this stance.
Learn more about landing gear systems at
https://brainly.com/question/18270863
#SPJ4
in which case is the stronger acid not listed first? 1. h2so4 > h2so3 2. h2o > h2s 3. h2so3 > h2so2 4. hno3 > hno
In case 4, HNO3 is not listed first, but rather HNO2. HNO3 is the stronger acid because it has a higher Ka value, meaning that it is more likely to donate a proton to form the conjugate base.
The other three cases all list the stronger acid first, meaning that it is more likely to donate a proton.
To explain further, we must first understand what Ka is and what it represents. Ka is an equilibrium constant, and it measures the strength of an acid. It is equal to the ratio of the product of the concentrations of the ions and the reactant, and the reactant concentration. A higher Ka value indicates that the acid is more likely to donate a proton, making it a stronger acid.
In case 4, HNO3 has a higher Ka value than HNO2, making it the stronger acid. However, it is listed second in the list, rather than first. This is because the list is in descending order of acid strength, so HNO2 is listed first because it is the weaker acid.
In conclusion, in case 4, HNO3 is the stronger acid, but it is not listed first. This is because the list is in descending order of acid strength, so the weaker acid is listed first.
For more such questions on conjugate base
https://brainly.com/question/22514615
#SPJ11
when aqueous solutions of fecl3 and (nh4)2s are mixed a solid precipitate forms. what is the correct formula for the precipitate?
The correct formula for the precipitate formed when aqueous solutions of [tex]FeCl_{3}[/tex] and [tex](NH_{4})2S[/tex] are mixed is [tex]Fe_{2}S_{3}[/tex].
What is a precipitate?А precipitаte is аn insoluble solid thаt forms from а chemicаl reаction in а solution. It hаppens when two solutions thаt contаin soluble sаlts аre mixed, аnd а new insoluble sаlt is formed. In this cаse, when аqueous solutions of [tex]FeCl_{3}[/tex] аnd [tex](NH_{4})2S[/tex] аre mixed, а solid precipitаte forms.
To determine the correct formulа for the precipitаte, we need to consider the reаction thаt tаkes plаce during mixing. Aqueous solutions of [tex]FeCl_{3}[/tex] and [tex](NH_{4})2S[/tex] react to form [tex]Fe_{2}S_{3}[/tex] (Iron(III) sulfide) and [tex]6NH_{4}Cl[/tex] (Ammonium chloride) as shown below:
[tex]Fe_{2}S_{3}[/tex] (aq) + 3 [tex](NH_{4})2S[/tex] (aq) → [tex](NH_{4})2S[/tex] (s) + [tex]6NH_{4}Cl[/tex] (aq)
So the correct formula for the precipitate formed is [tex]Fe_{2}S_{3}[/tex].
For more information about precipitate refers to the link: https://brainly.com/question/29762381
#SPJ11
liquids are anisotropic because their properties are independent of the axis of testing. true or false
Answer: Liquids are anisotropic because their properties are independent of the axis of testing. This statement is FALSE.
Anisotropy is the property of being directionally dependent, implying various qualities in various directions. In contrast to isotropy, which implies properties that are the same regardless of the direction of measurement. As a result, liquids are isotropic, indicating that their qualities do not differ based on the testing axis.
A material is anisotropic if its mechanical or physical properties differ depending on the direction of measurement. Solids, for example, can be anisotropic. When evaluating solids, it's frequently necessary to be aware of this property, which can have an impact on the data gathered during testing.
Therefore, liquids are not anisotropic because their properties are not dependent on the axis of testing. The correct statement is "Liquids are isotropic because their properties do not depend on the axis of testing."
Learn more about Anisotropy here:
https://brainly.com/question/28379789#
#SPJ11
g which reaction requires platinum as a catalyst? a. oxidation of an aldehyde or ketone b. reduction of an aldehyde or ketone c. reaction of an aldehyde or ketone with an alcohol d. all of the responses are reactions that are catalyzed by platinum.
The reaction that requires platinum as a catalyst is the B. reduction of an aldehyde or ketone.
This reaction occurs when an aldehyde or ketone is treated with hydrogen gas in the presence of a platinum-based catalyst. The resulting product is alcohol. This reaction is important in the production of alcohols, aldehydes, and ketones from their precursors. The catalyst helps to break the chemical bonds of the molecules and increase the reaction rate.
In addition to being used for the reduction of aldehydes and ketones, platinum can also be used to catalyze the oxidation of an aldehyde or ketone. In this reaction, an aldehyde or ketone is treated with an oxidizing agent, such as oxygen or ozone, in the presence of a platinum-based catalyst. This reaction is used to produce carboxylic acids and esters. Both of these reactions require the use of a platinum-based catalyst, which helps to speed up the reaction rate.
In summary, the reaction that requires platinum as a catalyst is the reduction of an aldehyde or ketone. Platinum can also be used to catalyze the oxidation of an aldehyde or ketone. Both of these reactions are important for the production of alcohols, aldehydes, and ketones from their precursors. Therefore the correct option is B
Know more about platinum-based catalyst here:
https://brainly.com/question/15415756
#SPJ11
what is the correct structure for 5-hydroxy-2-phenyl-3-hexanone? group of answer choices ii iii v iv i
The structure of 5-hydroxy-2-phenyl-3-hexanone is as follows:
The structure of 5-hydroxy-2-phenyl-3-hexanone is made up of a hexanone backbone, which is a six-carbon chain with a ketone functional group attached to the second carbon atom. The carbonyl group on the hexanone backbone has a phenyl group and a hydroxy group, which is a hydroxyl group connected to the fifth carbon atom of the hexanone backbone, attached to it.
The prefix 5-hydroxy-2-phenyl-3-hexanone indicates that the hydroxyl group is attached to the fifth carbon atom of the hexanone backbone, while the phenyl group is attached to the second carbon atom of the hexanone backbone.
The structural formula of 5-hydroxy-2-phenyl-3-hexanone is as follows:
In summary, the correct structure for 5-hydroxy-2-phenyl-3-hexanone is a hexanone backbone with a ketone functional group on the second carbon atom, a phenyl group attached to the second carbon atom, and a hydroxyl group attached to the fifth carbon atom. The structural formula of 5-hydroxy-2-phenyl-3-hexanone is given above.
To know more about Hexanone backbone refer here:
https://brainly.com/question/30156644#
#SPJ11
describe how you can determine the ratio of cis- and trans-2-methylcyclohexanols from the 1h nmr spectrum provided. (hint: what do the peaks at 3.05 ppm and 3.75 ppm represent and what does their integration show?)
The ratio of cis-2-methylcyclohexanol to trans-2-methylcyclohexanol can be determined from the 1H NMR spectrum by analyzing the chemical shift and integration of the two peaks present.
In order to determine the ratio of cis- and trans-2-methylcyclohexanols from the 1H NMR spectrum provided, one must interpret the chemical shift and integration of the various peaks present.What is 1H NMR spectroscopy?1H NMR spectroscopy, also known as proton NMR spectroscopy or magnetic resonance spectroscopy, is a technique used to determine the molecular structure of a sample by analyzing its nuclear magnetic resonance (NMR) properties. The chemical shift and integration of a molecule's protons can be used to identify the molecule's structure and determine its ratio of cis- and trans-2-methylcyclohexanols.Here are the steps to determine the ratio of cis- and trans-2-methylcyclohexanols from the 1H NMR spectrum provided:Identify the peaks: In this case, there are two peaks present in the spectrum at 3.05 ppm and 3.75 ppm. These peaks correspond to the protons present in the 2-methylcyclohexanol molecule.3.05 ppm peak: This peak corresponds to the proton present in the trans-2-methylcyclohexanol molecule.3.75 ppm peak: This peak corresponds to the proton present in the cis-2-methylcyclohexanol molecule.Integration: Integration is the measurement of the relative abundance of each type of proton present in the sample. In this case, the ratio of the two peaks can be used to determine the ratio of cis- and trans-2-methylcyclohexanols.Using the integration values of the peaks, the ratio of cis-2-methylcyclohexanol to trans-2-methylcyclohexanol can be calculated. If there are two integrals with a 1:1 ratio, there is an equal amount of cis- and trans-2-methylcyclohexanols present in the sample. If the ratio is 2:1 or 1:2, there are twice as many molecules of one isomer present as the other isomer.Explain in 200 words about how you can determine the ratio of cis- and trans-2-methylcyclohexanols from the 1H NMR spectrum provided1H NMR spectroscopy is a type of nuclear magnetic resonance spectroscopy that can be used to analyze the structure of a molecule. The chemical shift and integration of the protons in a molecule can provide valuable information about its composition and structure.In the case of the 1H NMR spectrum provided, there are two peaks present at 3.05 ppm and 3.75 ppm. These peaks correspond to the protons present in the 2-methylcyclohexanol molecule. The 3.05 ppm peak corresponds to the trans-2-methylcyclohexanol molecule, while the 3.75 ppm peak corresponds to the cis-2-methylcyclohexanol molecule.Integration is the measurement of the relative abundance of each type of proton present in the sample. In this case, the ratio of cis-2-methylcyclohexanol to trans-2-methylcyclohexanol can be calculated using the integration values of the peaks.If there are two integrals with a 1:1 ratio, there is an equal amount of cis- and trans-2-methylcyclohexanols present in the sample. If the ratio is 2:1 or 1:2, there are twice as many molecules of one isomer present as the other isomer. Therefore, the ratio of cis-2-methylcyclohexanol to trans-2-methylcyclohexanol can be determined from the 1H NMR spectrum by analyzing the chemical shift and integration of the two peaks present.
Learn more about Cis- and trans-2-methylcyclohexanols
brainly.com/question/19426307
#SPJ11
___________________ is a property that can be observed in a substance? (multiple answers)
A magnetism
B texture
C color
D odor
Magnetism, texture, color and odor are all properties that can be observed in a substance.
What are properties of a substance?Properties of a substance are characteristics that can be used to describe and identify the substance.
Physical properties are those that can be observed or measured without changing the composition of the substance, while chemical properties describe how a substance reacts with other substances.
Intensive properties are independent of the amount of substance, while extensive properties depend on the amount of substance. Examples of properties include color, texture, density, melting point, boiling point, reactivity, and flammability.
Learn about Physical properties of a substance here https://brainly.com/question/12330204
#SPJ1
each of the following pairs of solutions produces a reaction. for each reaction, write the balanced molecular and net ionic equations, and classify the reaction as a precipitation, neutralization, gas-forming, or redox reaction. a. sodium carbonate and hydrochloric acid b. silver nitrate and copper c. nickel(ii) bromide and ammonium sulfide d. phosphoric acid and barium hydroxide
A. The reaction is a neutralization reaction.
B. The reaction is a redox reaction.
C. The reaction is a precipitation reaction.
D. The reaction is a neutralization reaction.
The balanced molecular and net ionic equations are below.
A. Sodium Carbonate and Hydrochloric Acid:
The molecular equation is:
Na₂CO₃ + 2HCl → 2NaCl + H₂O + CO₂
The net ionic equation is:
2H⁺ + CO₃²⁻ → H₂O + CO₂
This reaction is a neutralization reaction, producing salt and water.
B. Silver Nitrate and Copper:
The molecular equation is:
2AgNO₃ + Cu → 2Ag + Cu(NO₃)₂
The net ionic equation is:
2Ag⁺ + Cu → 2Ag + Cu²⁺
This reaction is a redox reaction, in which copper metal is produced from copper ions.
C. Nickel(II) Bromide and Ammonium Sulfide:
The molecular equation is:
NiBr₂ + (NH₄)₂S → NiS + 2NH₄Br.
The net ionic equation is:
Ni²⁺ + 2Br⁻ + 2NH₄⁺ + S²⁻ → NiS + 2NH₄Br.
This reaction is a precipitation reaction, in which a solid salt is formed.
D. Phosphoric Acid and Barium Hydroxide:
The molecular equation is:
2H₃PO₄ + 3Ba(OH)₂ → Ba₃(PO₄)₂ + 6H₂O
The net ionic equation is:
6H⁺ + 3Ba²⁺ + 6OH⁻ → Ba⁺ + 6H₂O.
This reaction is a neutralization reaction, producing salt and water.
To know more about the neutralization reaction, refer here:
https://brainly.com/question/28970253#
#SPJ11
what are the trials of Newton's first law of motion? Please help!!
Answer:
the law of inertia
Explanation:
Answer:
Newton's first law of motion states that an object at rest will remain at rest, and an object in motion will remain in motion with a constant velocity, unless acted upon by an external force. The trials of Newton's first law of motion are:
Inertia: The tendency of an object to resist changes in its motion, which is a direct consequence of Newton's first law. For example, a book resting on a table will remain at rest unless acted upon by an external force such as someone picking it up or the table collapsing.
Acceleration: If an external force acts on an object, it will accelerate. For example, a ball sitting on a flat surface will not move unless a force is applied, such as someone pushing it. Once the force is applied, the ball will accelerate in the direction of the force.
Equilibrium: When the net force acting on an object is zero, it is said to be in equilibrium. For example, a person standing still on the ground is in equilibrium because the gravitational force pulling them down is balanced by the force of the ground pushing up on them.
Friction: Friction is a force that opposes motion between two surfaces that are in contact with each other. This force is another example of an external force that can affect an object's motion, and is related to Newton's first law because it can cause an object to come to rest if the force of friction is greater than the force applied to the object.
which was an assumption bohr made in his model? select the correct answer below: wavelengths have negative values. energy values were quantized. neutrons are negatively charged. electrons are found in the nucleus.
Electrons are found in orbits around the nucleus. This was an assumption Bohr made in his model.
Compared to the valence shell model, the Bohr's model of the hydrogen atom is quite simple. It may be seen as an outmoded scientific theory since it may be derived from the more comprehensive and precise quantum mechanics as a first-order approximation of the hydrogen atom.To expose students to quantum mechanics or energy level diagrams before moving on to the more accurate but more challenging valence shell atom, the Bohr model is still often used in classroom instruction.This is due of its simplicity and its right conclusions for a few systems.
learn more about Bohr's model Refer:brainly.com/question/11801538
#SPJ1
you are studying a small stream and find that its ph is 4.5. what does this tell you about the stream, and what might be the cause?
The stream having pH 4.5 is acidic in nature. The reason behind this is likely due to the presence of organic acids.
pH is defined as the hydrogen ion concentration of a solution. If the pH of a solution is below 7 it is considered to be acidic, if it is 7 then it is neutral and pH above 7 is considered to be basic in nature.
Water in streams contains many organic acids, acidic sulphates and nitrates which have a low buffering capacity. Acidic streams occur mostly in the hilly areas and this acidic water is highly corrosive in nature.
To know more about pH here
https://brainly.com/question/30691408
#SPJ4
halogenated hydrocarbons will eventually break into more harmful component parts if they are exposed to:
Answer: Halogenated hydrocarbons will eventually break into more harmful component parts if they are exposed to ultraviolet radiation.
Halogenated hydrocarbons are organic compounds that contain one or more halogen atoms in the form of fluorine, chlorine, bromine, or iodine. When they react with other elements, they produce alkyl radicals and halogen atoms, both of which are reactive.
This reaction can be initiated by exposure to light or heat, which can cause the halogen-carbon bond to break and release halogen atoms.
Thus, halogenated hydrocarbons are a significant source of pollution, particularly in the atmosphere. They are also very durable and will linger in the environment for a long time. As a result, they have a significant effect on the environment and human health.
When exposed to ultraviolet radiation, halogenated hydrocarbons break down into more dangerous component parts that can be toxic to humans and animals.
Learn more about halogenated hydrocarbons here:
https://brainly.com/question/16368714#
#SPJ11
The girl was measuring the hallway the first part was 132 inches long the second part was 3 yards long how long is the Hallway in feet?? I don't know the answer it is on my homework and I have to finish it up so I won't fail please help
The length of the hallway is 20 feet. To calculate the length of the hallway in feet, we need to first convert the measurements to the same unit of measurement. Let's convert the second part from yards to inches, since the first part is already in inches:
3 yards = 3 x 36 inches = 108 inches
Now we can add the two lengths together:
Total length = 132 inches + 108 inches = 240 inches
Finally, we can convert the total length from inches to feet by dividing by 12:
Total length = 240 inches ÷ 12 = 20 feet
Therefore, the length of the hallway is 20 feet.
Learn more about hallway
https://brainly.com/question/16400635
#SPJ4
Full Question ;
The girl was measuring the hallway the first part was 132 inches long the second part was 3 yards long how long is the Hallway in feet??
were the reactions in part c endothermic or exothermic? how did you know that the reactions were endothermic or exothermic? why was it necessary to use two different concentrations of hcl in the reactions?
The reactions in Part C were endothermic reaction. This can be determined by looking at the sign of the enthalpy change (ΔH) of the reaction. If ΔH is positive, then the reaction is endothermic; if it is negative, then the reaction is exothermic. It was necessary to use two different concentrations of HCl in the reactions in order to measure the heat of neutralization of different concentrations of HCl with sodium hydroxide (NaOH).
This is because the enthalpy of neutralization is directly proportional to the concentration of the two reactants. Higher concentrations lead to more heat generated and higher enthalpies, and lower concentrations lead to less heat generated and lower enthalpies.
The heat of neutralization is the amount of heat released or absorbed when an acid and a base are mixed together to form a salt and water. This can be measured using a calorimeter, which measures the amount of heat released or absorbed by the reaction. When two different concentrations of HCl and NaOH are mixed together in the calorimeter, the resulting enthalpy change is the heat of neutralization. '
Know more about endothermic reactions here:
https://brainly.com/question/23184814
#SPJ11
Two compounds A and B, gave retention times of 4. 65 and 4. 86 min, respectively when separated on a 15. 0 cm HPLC column with 5. 0 um particles. Estimate the efficiency of the column and the plate height
The efficiency of the column is approximately 54,725 theoretical plates per column length, and the plate height is approximately 2.74 μm.
The efficiency of a column in High Performance Liquid Chromatography (HPLC) is measured by the number of theoretical plates per column length (N), which is a measure of the column's ability to separate components.
The plate height (H) is the length of the column required to form one theoretical plate.
To estimate the efficiency of the column and the plate height, we can use the following equation:
N = 16 * [tex](tR / w)^{2}[/tex]
where N is the number of theoretical plates, tR is the retention time of the compound, w is the peak width at half-height, and 16 is a constant that depends on the shape of the peak.
First, we need to calculate the peak width at half-height (w). We can estimate the peak width by subtracting the retention times of the two compounds and dividing by 4:
w = (4.86 - 4.65) / 4 = 0.0525 min
Next, we can use the equation above to calculate the number of theoretical plates for each compound:
N_A = 16 * [tex](4.65 / 0.0525)^{2}[/tex] = 50,450
N_B = 16 * [tex](4.86 / 0.0525)^{2}[/tex] = 59,000
We can then take the average of the two values to estimate the efficiency of the column:
N_avg = (N_A + N_B) / 2 = 54,725
Finally, we can use the following equation to calculate the plate height:
H = L / N_avg
where L is the column length. We are given that the column length is 15.0 cm:
H = 15.0 cm / 54,725 = 0.000274 cm = 2.74 μm
Therefore, the efficiency of the column is approximately 54,725 theoretical plates per column length, and the plate height is approximately 2.74 μm.
Learn more about High Performance Liquid Chromatography
https://brainly.com/question/14952062
#SPJ4
how can the chemical potential energy in an endothermic reaction best be described?(1 point) responses product and reactant chemical potential energy varies in different environments. product and reactant chemical potential energy varies in different environments. products and reactants have the same chemical potential energy. products and reactants have the same chemical potential energy. products have higher chemical potential energy than reactants. products have higher chemical potential energy than reactants. reactants have higher chemical potential energy than products.
The chemical potential energy in an endothermic reaction can best be described as products having a higher chemical potential energy than reactants.
The chemical potential energy of endothermic reactionsThe chemical potential energy in an endothermic reaction can best be described as:
"Products have higher chemical potential energy than reactants."
In an endothermic reaction, energy is absorbed by the system, and the products of the reaction have a higher potential energy than the reactants. This increase in potential energy is typically in the form of heat, which is absorbed from the environment.
Therefore, the correct option products have higher chemical potential energy than reactants.
More on endothermic reactions can be found here: https://brainly.com/question/23184814
#SPJ1
what topology did the cured adhesive and uv-cured diacrylate exhibit?
As per the given question, the cured adhesive and UV-cured diacrylate exhibit the mesh topology. The topology of a network is the way in which the components are arranged and connected. A mesh topology, also known as a mesh network, is a network in which each device is connected to every other device in the network. This provides
redundancy and fault tolerance, ensuring that if one device fails, the network will continue to function.In the mesh topology, all nodes are connected to each other. This type of topology provides the highest level of redundancy and
fault tolerance. Each node in a mesh network is responsible for sending and receiving data to and from other nodes. This type of network is commonly used in mission-critical applications where downtime is not an option, such as in
military communications, emergency services, and stock trading networks. Thus, the mesh topology is the topology exhibited by the cured adhesive and UV-cured diacrylate networks.
For more similar questions on topic cured adhesive
brainly.com/question/28119768
#SPJ11
what is the molar mass of freon-11 gas if its density is 6.13 g/l at stp? multiple choice 0.274 g/mol 3.64 g/mol 78.2 g/mol 137 g/mol 365 g/mol
The molar mass of Freon-11 gas if its density is 6.13 g/L at STP is 137 g/mol. The density of a gas depends on the gas's temperature, pressure, and molar mass.
This implies that the molar mass of a gas can be determined using its density, temperature, and pressure.
To compute molar mass, we'll use the ideal gas law, which is:
PVM = nRT
where: P is pressure, V is volume, M is molar mass, n is the number of moles, R is the universal gas constant, T is temperature
Rearranging the ideal gas equation to solve for molar mass M, we have:
M = (mRT) / (PV)
where: M is the molar mass of the gas (in grams per mole)m is the mass of gas in grams, R is the universal gas constant (0.08206 L atm / mol K), T is the temperature of the gas in Kelvin (K), P is the pressure of the gas in atmospheres (atm), V is the volume of gas in liters (L)
Here, we have the density of the gas which is given as 6.13 g/L at STP.
We can calculate the molar mass of the gas using the following formula:
M = dRT / PM
= 6.13 g/L * 0.08206 L atm / mol K * 273.15 K / 1 atm / 137 g/mol
M = 136.96 g/mol≈ 137 g/mol
Therefore, the molar mass of Freon-11 gas if its density is 6.13 g/L at STP is 137 g/mol.
For more such questions on universal gas constant , Visit:
https://brainly.com/question/15479436
#SPJ11
What are the spectator ions in Na+ + OH + H+ + Cl → H2O + Na+ + Cl?
O
A. Na+, OH, H+, and CM
OB. OH' and H+
O
O
C. Na+ and CH
D. OH", H+, and H20
E PREVIOUS
9A
The spectator ions in [tex]Na^{+}[/tex] + [tex]OH^{-}[/tex] + [tex]H^{+}[/tex] + [tex]Cl^{-}[/tex] → [tex]H_{2} O[/tex] + [tex]Na^{+}[/tex] + [tex]Cl^{-}[/tex] is sodium ions and chloride ions.
The spectator ion are defined as the ions which do not participate in chemical reactions and present the same on both sides of the reactions. If we write a net chemical reaction the spectator ions are cancelled from both sides of the equation.
[tex]Na^{+}[/tex] + [tex]OH^{-}[/tex] + [tex]H^{+}[/tex] + [tex]Cl^{-}[/tex] → [tex]H_{2} O[/tex] + [tex]Na^{+}[/tex] + [tex]Cl^{-}[/tex]
If we compare the chemical solutions before and after the reaction, sodium and chloride ions are present in both solutions but they do not undergo any chemical change at all. These ions present in the solution are called spectator ions since they don't participate in the chemical reaction at all.
To learn more about spectator ion
https://brainly.com/question/16033391
#SPJ4
The correct question is,
What are the spectator ions in
[tex]Na^{+}[/tex] + [tex]OH^{-}[/tex] + [tex]H^{+}[/tex] + [tex]Cl^{-}[/tex] → [tex]H_{2} O[/tex] + [tex]Na^{+}[/tex] + [tex]Cl^{-}[/tex] ?
4. what is conjugation? (cite any sources) does it make sense that one dye absorbs light of a higher or lower wavelength based on the degree of conjugation? (for a complete answer, you should correlate the approximate wavelength of light absorbed by your synthetic dyes with the conjugation present in each of their chemical structures.)
Conjugation is the process of connecting multiple double bonds or lone pairs of electrons in a molecule or chemical structure.
Conjugation affects the absorption of light in a dye. Dyes with conjugated structures will absorb light of lower wavelength than those without conjugated structures. For example, a synthetic dye with two double bonds will absorb light of lower wavelength than one with just one double bond. The degree of conjugation in a chemical structure will affect the amount of light absorbed and the wavelength of the light that is absorbed.
The approximate wavelength of light absorbed by synthetic dyes is related to the degree of conjugation in the chemical structure. A dye with more conjugated double bonds or lone pairs will absorb light of a lower wavelength than one with fewer conjugated double bonds or lone pairs. For example, a dye with four double bonds will absorb light of a lower wavelength than one with three double bonds. The longer the conjugation, the lower the wavelength of light absorbed.
In conclusion, the degree of conjugation present in a chemical structure affects the amount and wavelength of light absorbed by a dye. The longer the conjugation, the lower the wavelength of light absorbed.
To know more about conjugation click here:
https://brainly.com/question/30907314
#SPJ11
for a given chemical system, do the equilibrium constant (k) and the reaction quotient (q) differ or are they the same?
For a given chemical system, the equilibrium constant (K) and the reaction quotient (Q) are not the same, but rather they differ.
What is an Equilibrium Constant (K)?
The equilibrium constant (K) is a ratio of equilibrium concentrations, and it is a measure of how far a chemical reaction has progressed at a certain temperature. K is a ratio of the products' concentration to the reactants' concentration, each raised to the power of their respective stoichiometric coefficients. The value of K is temperature-dependent.
What is the Reaction Quotient (Q)?
The reaction quotient, Q, on the other hand, is a ratio of concentrations that are not at equilibrium but instead have been taken at any point in time during the reaction's progress. The reaction quotient is used to determine whether a system is at equilibrium, will proceed to the left or the right to reach equilibrium, or will remain unchanged. The value of Q, like the equilibrium constant, is temperature-dependent.
Learn more about equilibrium constant (K) here:
https://brainly.com/question/29802105#
#SPJ11
which species will have an ir spectrum? select one or more: nitrogen methane water vapor carbon dioxide oxygen argon
The species that will have an IR spectrum are methane, water vapor, and carbon dioxide.
Thus, the correct options are methane, water vapor, and carbon dioxide (B, C, and D).
Аn IR spectrum is essentiаlly а grаph plotted with the infrаred light аbsorbed on the Y-аxis аgаinst frequency or wаvelength on the X-аxis. IR Spectroscopy detects frequencies of infrаred light thаt аre аbsorbed by а molecule. Molecules tend to аbsorb these specific frequencies of light since they correspond to the frequency of the vibrаtion of bonds in the molecule.
Methane, water vapor, and carbon dioxide will have an IR spectrum because any molecule with more than one element can be bent or stretched to change the dipole moment which will absorb IR.
For more information about IR spectrum refers to the link: https://brainly.com/question/29794652
#SPJ11
what is the vapor pressure in torr above a solution that contains 4.54 mols of methanol combined with 1.95 mols of ethanol?
The vapor pressure above the solution is 80.7 torr.
To calculate the vapor pressure above the solution, we can use Raoult's law, which states that the vapor pressure of a solution is equal to the mole fraction of each component multiplied by its vapor pressure in pure state.
Assuming that methanol and ethanol behave ideally and have vapor pressures of 96.0 and 44.9 torr at their pure states, respectively, we can calculate the total vapor pressure above the solution as follows:
Calculate the total number of moles of solute (methanol and ethanol) in the solution:
4.54 mol methanol + 1.95 mol ethanol = 6.49 mol solute
Calculate mole fraction of each component in solution:
Mole fraction of methanol = 4.54 mol / 6.49 mol = 0.700
Mole fraction of ethanol = 1.95 mol / 6.49 mol = 0.300
Use Raoult's law to calculate the vapor pressure above the solution:
Vapor pressure above solution = (mole fraction of methanol x vapor pressure of methanol) + (mole fraction of ethanol x vapor pressure of ethanol)
Vapor pressure above solution = (0.700 x 96.0 torr) + (0.300 x 44.9 torr)
Vapor pressure above solution = 67.2 torr + 13.5 torr
Vapor pressure above solution = 80.7 torr
To know more about vapor pressure here
https://brainly.com/question/11864750
#SPJ4
Need help I’ll give points
The purpose of the experiment is to observe the effects of natural selection on the populations of different types of organisms in simulated environments.
What are responses to other questions?2. The independent variable is the type of organism or trait being observed, and the dependent variable is the number or frequency of organisms with that trait after a certain time. The control variables include the initial number of organisms and the duration of the tests.
3. A hypothesis based on observations and scientific principles should be written. For example, if observing the effect of camouflage on moth populations, a hypothesis could be: "Moths with better camouflage will survive and reproduce at a higher rate, leading to an increase in the frequency of the camouflaged trait in the population over time."
4. Experimental Methods: Describe the tools used to collect data. For example, a counting sheet and a calculator.
5. Describe the procedure followed to conduct the experiment, including setting up the simulated environment, releasing the organisms, and recording the number or frequency of organisms with a certain trait over time.
6. Data and Observations: Record observations of the initial number of organisms and the number or frequency of organisms with a certain trait after each test.
7. Create a table to organize the data collected. The table should include the type of organism or trait being observed, the initial number of organisms, and the number or frequency of organisms with that trait after each test.
Conclusions:
Draw conclusions about how natural selection leads to increases and decreases of specific traits in populations over time. Provide an evidence-based claim that is supported by the data collected.
For example, "Organisms with advantageous traits have a better chance of surviving and reproducing, leading to an increase in the frequency of those traits in the population over time."
Make a prediction about what would happen if one of the variables in the experiment was changed. Explain the prediction using a cause-and-effect relationship based on the observations and scientific principles.
For example, "If the simulated environment was changed to have a different type of predator, the frequency of the camouflaged trait may change, as the predator may have different visual sensitivities that make different colors or patterns more or less visible."
learn more about natural selection: https://brainly.com/question/23929271
#SPJ1
The complete part of the question in the picture
Adaptations and Population Changes
It’s time to complete your Lab Report. Save the lab to your computer with the correct unit number, lab name, and your name at the end of the file name (e.g., U2_ Lab_AdaptationsAndPopulationChanges_Alice_Jones.doc).
Introduction
1. What was the purpose of the experiment?
Type your answer here:
2. What were the independent, dependent, and control variables in your investigation? Describe the variables for the simulation with the moths and birch trees.
Type your answer here:
3. Write a hypothesis based on observations and scientific principles.
Experimental Methods
1. What tools did you use to collect your data?
2. Describe the procedure that you followed to conduct your experiment.
Type your answer here:
Data and Observations
1. Record your observations.
Type your answer here:
Table 1. Number of Moths in Birch Tree Simulation
Type of moth (color) Initial number of moths Number of moths after test 1 Number of moths after test 2 Number of moths after test 3
Pink and yellow 5
Blue and white 5
White with black spots 5
Black with white spots 5
Table 2. Number of Moths in Flower Simulation.
Type of moth (color) Initial number of moths Number of moths after test 1 Number of moths after test 2 Number of moths after test 3
Pink and yellow 5
Blue and white 5
White with black spots 5
Black with white spots 5
Conclusions
1. What conclusions can you draw about how natural selection leads to increases and decreases of specific traits in populations over time? Write an evidence-based claim.
Type your answer here:
2. Predict what would happen to the number of each type of moth if the pink flowers were replaced with blue ones. Explain your prediction using a cause-and-effect relationship.
Jeff is looking to increase his bone growth and strength. Which macromineral should Jeff consume?
A. Potassium
B. Magnesium
C. Sodium
D. Calcium
If 1 litre of 2.2m sulphuric acid is poured into a bucket containing 10 litres of water and the resulting solution is mixed thoroughly the resulting sulfuric acid concentration will be
exposing a molecule to ir radiation causes what molecular change? electron ejection electron excitation vibrational excitation change of nuclear spin rotation of bonds
When a molecule is exposed to infrared radiation, the molecular change is c. a vibrational excitation.
Infrared radiation is a type of electromagnetic radiation that has a wavelength longer than visible light but shorter than microwaves. It is also known as heat radiation since it produces heat upon exposure to matter. Infrared radiation is used in various fields such as astronomy, meteorology, physics, and chemistry. It can detect celestial objects, measure temperature and atmospheric conditions, and identify molecular structures in chemistry.
Molecules absorb infrared radiation when the frequency of the radiation matches the natural vibration frequency of the molecule. The energy from the IR radiation is absorbed by the molecule's vibrational motion, leading to a change in the molecule's vibrational state.The absorbed energy causes the bonds in the molecule to stretch, contract, or bend. This energy can break the bonds, rearrange the atoms, or create new bonds, which leads to chemical changes in the molecule. Vibrational excitation is a common way to study molecular structure and function.
Summary, when a molecule is exposed to infrared radiation, it undergoes a vibrational excitation. Infrared radiation is a type of electromagnetic radiation that has a longer wavelength than visible light but shorter than microwaves. Molecules absorb infrared radiation when the frequency of the radiation matches the natural vibration frequency of the molecule.
Learn more about electromagnetic at:
https://brainly.com/question/29318543
#SPJ11
if you mix 312 gram(s) of a solute in water and bring it to a final volume of 378 ml, what will be the concentration of the resulting solutions in g/ml? answers cannot contain more than one decimal place.
Answer : If you mix 312 g of a solute in water and bring it to a final volume of 378 mL, the concentration of the resulting solution will be 0.82 g/mL.
To calculate the concentration, divide the mass of solute (312 grams) by the volume of the resulting solution (378 mL). Thus, 312 g/cc/378 mL = 0.82 g/mL. The concentration of a solution is the ratio of the amount of solute (in this case, 312 grams) to the total volume of the solution (in this case, 378 mL). The concentration can be expressed as either grams of solute per milliliter of solution (g/mL) or moles of solute per liter of solution (mol/L).
The concentration of a solution can be increased by either adding more solute or decreasing the volume of the solution. For example, if you mix 500 g of a solute in 500 mL of water, the concentration of the resulting solution will be 1 g/mL. If you then reduce the volume of the solution to 250 mL, the concentration will increase to 2 g/mL.
It is also important to note that the concentration of a solution cannot be greater than the solubility of the solute. This means that the solute must be completely dissolved before it can be added to the solution in order for the concentration to be increased.
Know more about solubility here:
https://brainly.com/question/28170449
#SPJ11