be-11 what special care must you take with your hull identification number (hin)?

A network address of 132.66.0.0 with a subnet mask of 255.255.224.0 indicates a CIDR notation of /19. This means that the first 19 bits of the subnet mask are fixed, while the remaining 13 bits can be used for different subnets and host addresses.

To determine the valid subnet addresses, we need to calculate the increment value and then apply it to the network address. The increment value is calculated by subtracting the fixed subnet mask bits (in the third octet) from 256: 256 - 224 = 32. With this increment value, we can find the valid subnet addresses by adding the increment to the third octet of the network address.

1. First subnet: 132.66.0.0 (This is the network address and also the first subnet) 2. Second subnet: 132.66.32.0 (Adding the increment value to the third octet) 3. Third subnet: 132.66.64.0 4. Fourth subnet: 132.66.96.0 So, the four valid subnet addresses are 132.66.0.0, 132.66.32.0, 132.66.64.0, and 132.66.96.0.

Learn more about network address here-

https://brainly.com/question/14719330

#SPJ11

The correct answer is The term for when a set of messages are linkable to each other through the use of a common id, but that id is not linkable to a real identity is "pseudonymization."

Pseudonymization is a privacy-enhancing technique that involves replacing identifying information with a pseudonym, or a randomly generated identifier, to protect the privacy of individuals. By using pseudonyms, data can still be linked together for analysis or research purposes without revealing the true identity of individuals. when a set of messages are linkable to each other through the use of a common id, but that id is not linkable to a real identity.

To learn more about linkable click the link below:

brainly.com/question/30051912

#SPJ11

Pseudocode is a simplified programming language used to outline the logic of a program. In this case, we will be writing pseudocode to print out 3 offices, with 5 employees each, using a nested loop.

A nested loop is a loop within a loop. In this case, we will have an outer loop to iterate through the 3 offices and an inner loop to iterate through the 5 employees in each office.

Here's the pseudocode:

FOR i = 1 TO 3
   PRINT "Office " + i
   FOR j = 1 TO 5
       PRINT "Employee " + j
   END FOR
END FOR

The above pseudocode will iterate through the outer loop three times, each time printing "Office" followed by the office number. It will then iterate through the inner loop five times, each time printing "Employee" followed by the employee number.

By using the above pseudocode, we can easily print out 3 offices with 5 employees each using a nested loop.

To learn more about Pseudocode, visit:

https://brainly.com/question/13208346

#SPJ11

If you are notified by Air Traffic Control (ATC) that your transponder is intermittent, it is important to comply with their instructions and follow the regulations outlined by the aviation authorities. In general, flying in Class B airspace without a functioning transponder may not be permitted.

Transponders are critical for air traffic control to identify and track aircraft. In Class B airspace, where there is typically a high volume of traffic, having a functioning transponder is essential for maintaining situational awareness and ensuring safe separation between aircraft. It is recommended to consult with ATC and follow their guidance in such situations. They may provide alternate instructions or routing to address the transponder issue and ensure the safety of your flight. Compliance with ATC instructions and adhering to airspace regulations is vital for aviation safety.

Learn more about Transponders here:

https://brainly.com/question/30774284

#SPJ11

The information system that eliminates data duplication and carefully manages changes to duplicated data to maintain consistency is a Database Management System

A Database Management System DBMS is designed to efficaciously and securely save and control massive quantities of facts in a vital location, and it consists of gear for information modeling, statistics querying, records retrieval, and records backup and healing.

By putting off data duplication and thoroughly managing modifications to duplicated records, a DBMS allows ensure statistics consistency and accuracy, that's important for making informed commercial enterprise selections.

Learn more about data duplication at

https://brainly.com/question/31933468

#SPJ1

(a) Linear kernel:

The final values of the dual weights after one pass over the training examples using the linear kernel are:

α1 = 1, α2 = -1, α3 = 2, α4 = -1, α5 = 1.

(b) Polynomial kernel with degree 3:

The final values of the dual weights after one pass over the training examples using the polynomial kernel with degree 3 are:

α1 = 1, α2 = -1, α3 = 8, α4 = -1, α5 = 1.

To update the dual weights using the kernelized perceptron algorithm, we follow these steps for each training example:

Initialize the weight vector w and bias term b to zero.

Compute the predicted label y_pred for the current example using the current weights and bias: y_pred = sign(Σ(α_i * K(x_i, x))).

If the predicted label y_pred does not match the true label y, update the weights and bias:

w = w + α_i * y_i * x_i

b = b + α_i * y_i

Increment the corresponding α_i value: α_i = α_i + 1

For the linear kernel, the dot product of two vectors is used as the kernel function:

K(x, x0) = x · x0.

For the polynomial kernel with degree 3, the kernel function is:

K(x, x0) = (x · x0 + 1)^3.

Using the given training examples and initial values of α_i, we can go through each example and update the dual weights based on the kernel used.

After one pass over the training examples, we have updated the dual weights using the kernelized perceptron algorithm. For the linear kernel, the final values of the dual weights are α1 = 1, α2 = -1, α3 = 2, α4 = -1, α5 = 1. For the polynomial kernel with degree 3, the final values of the dual weights are α1 = 1, α2 = -1, α3 = 8, α4 = -1, α5 = 1. These updated dual weights can be used to classify new examples using the respective kernels.

To know more about kernel ,visit:

https://brainly.com/question/31845340

#SPJ11

The objective is to create a function called chop2 that takes a list as input and returns a new list without the first two elements. However, if the list is not long enough, it should return a message instead.

To accomplish this task, you can create a new list that starts from the third element of the input list using list slicing. If the input list is less than 2 elements, you can return a message that the list isn't long enough. Here is the code implementation:

```python
def chop2(lst):
   if len(lst) < 2:
       return "The list isn't long enough."
   else:
       return lst[2:]
```
In the code above, we first check if the length of the input list is less than 2. If it is, we return a message that the list isn't long enough. Otherwise, we return the new list starting from the third element using list slicing.

In conclusion, the function chop2 takes a list as input and returns a new list without the first two elements. If the input list is not long enough, it returns a message indicating so.

To learn more about function, visit:

https://brainly.com/question/28945272

#SPJ11

When a computer starts or connects to the company intranet, network, or virtual private network (VPN), a warning banner usually appears and informs end users that the organization reserves the right to inspect computer systems and network traffic at will.

The warning banner serves as a legal notice or policy statement that outlines the responsibilities and expectations of users regarding the use of the company's network and resources. It typically emphasizes the organization's rights to monitor and review computer systems, network activities, and data transmissions for security, compliance, or other legitimate purposes. The purpose of the warning banner is to ensure that end users are aware of the organization's monitoring practices, their responsibilities, and any potential consequences for unauthorized or improper use of the network.

Learn more about warning banner here:

https://brainly.com/question/30321410

#SPJ11

The correct answer is The BEST backup strategy to minimize the number of backups that would need to be restored in case of data loss is a strategy that includes both full backups and incremental backups.

The strategy of full backups followed by incremental backups is the recommended approach to minimize the number of backups that would need to be restored. In this strategy, a full backup of all data is taken periodically, such as weekly or monthly. Incremental backups are then taken at more frequent intervals, such as daily.During the incremental backups, only the changes made since the last backup are saved. This means that the size of the incremental backups is much smaller than that of the full backup, reducing backup storage requirements and backup time. In case of data loss, only the full backup and the incremental backups taken since the last full backup need to be restored.

To learn more about restored click the link below:

brainly.com/question/31419127

#SPJ11

The single biggest problem with uninstalling software is that it often leaves behind leftover files and registry entries. When a program is installed on a computer, it creates a variety of files and entries in the Windows registry that are necessary for the program to run.

These files and entries can be scattered throughout the computer's hard drive and can be difficult to locate and delete. When a program is uninstalled, it may leave behind some of these files and entries, causing problems with the computer's performance and potentially interfering with other programs that are installed. This can lead to slow performance, crashes, and other issues that can be frustrating for users.

Another problem with uninstalling software is that some programs are designed to be difficult to remove. This may be intentional on the part of the software developer, who may want to prevent users from easily removing the program and potentially switching to a competitor's product. In some cases, the program may leave behind hidden files or registry entries that are difficult to find and remove, or it may install additional software or toolbars that can be difficult to remove. All of these issues can make it challenging for users to completely uninstall software from their computers.

Learn more about software here-

https://brainly.com/question/985406

#SPJ11

The correct answer is (a) The missing item is the standard error of the mean (SE mean), which can be calculated as follows:

SE mean = standard deviation / square root of sample sizeSE mean = 1.8 / sqrt(10) ≈ 0.569The calculated SE mean is then used to determine the z-score and p-value.This is a two-sided test, as the alternative hypothesis (h1) states that the population mean is not equal to 35.To construct a 95% two-sided confidence interval (CI) on the mean, we can use the formula:CI = sample mean ± z* (SE mean)where z* is the critical value from the standard normal distribution that corresponds to a 95% confidence level. Since this is a two-sided test, we need to split the 5% significance level equally between the two tails of the distribution, so the critical value is z* = 1.96.Substituting the values, we get:CI = 35.710 ± 1.96 * 0.569CI = (34.59, 36.83)Therefore, we are 95% confident that the true population mean falls within this range.

To learn more about error click the link below:

brainly.com/question/30577442

#SPJ11

If I is the number of inversions in an input array of n records, then Insertion Sort will require I swaps. The correct answer is option B.

In an array, if two elements are out of their natural order, they are said to form an inversion. More formally, for an array A, if A[i] > A[j] and i < j, then the pair (A[i], A[j]) forms an inversion.

Now, when we perform Insertion Sort on an array, we start with an empty left portion and gradually expand it by inserting elements from the unsorted right portion. Each time we insert an element, we may need to swap it with elements in the left portion until it is in its correct sorted position.

The key observation here is that each swap performed during the Insertion Sort operation eliminates one inversion from the array. This is because swapping two elements can change their relative order and move them closer to their correct positions.

So, if we have I inversions in the input array, Insertion Sort will require exactly I swaps to sort the array. Therefore, the correct answer is option B. I.

The complete question is -

If I is the number of inversions in an input array of n records, then Insertion Sort will require how many swaps?

A. n²/2

B. I

C. I - n

Learn more about arrays here:

https://brainly.com/question/26104158

#SPJ11

You could occasionally have problems locating a specific file. If this occurs to you, don't freak out and computer and downloads.

Thus, There are a couple of straightforward ways to locate the file, which is most likely still on your computer. In this lesson, we'll go through several methods for finding your files, such as searching and looking in obvious areas and problems.

Your computer will automatically store downloaded files in a certain folder called the Downloads folder. This is the first place you should search if you're having difficulties locating a file you obtained from the Internet, such as a photo attached to an email message and computer.

Open File Explorer, then find and choose Downloads (located below Favorites on the left side of the window) to display the Downloads folder. Your most recent downloads will be displayed in a list.

Thus, You could occasionally have problems locating a specific file. If this occurs to you, don't freak out and computer and downloads.

Learn more about Downloads, refer to the link:

https://brainly.com/question/26456166

#SPJ1

The statement "In a binary search, first, the search item is compared with the last element of the list" is false (b).

If the search item is less than the middle element, the search continues in the lower half of the list. If it is greater than the middle element, the search continues in the upper half of the list. This process of dividing the list in half and comparing the search item to the middle element is repeated until the item is found or it is determined that the item is not in the list.

In a binary search, the search item is initially compared with the middle element of a sorted list. If it matches, the search is successful. If not, the process is repeated with the appropriate half of the list, depending on whether the search item is greater or smaller than the middle element.

To know more about binary search visit:

https://brainly.com/question/12946457

#SPJ11

The statement "a pointer allows us to pass potentially large amounts of data around at low cost" is true. A pointer is a data type in programming that stores the memory address of a variable or an object. It allows us to indirectly access and manipulate the data stored in that memory location.

Pointers are frequently used to pass data between functions or modules in a program. By passing a pointer to a variable or an object, we can avoid the overhead of copying the entire data structure. This is particularly useful when dealing with large data sets that would require significant memory allocation and copying. Furthermore, using pointers can improve the efficiency of a program by reducing the number of function calls and minimizing the amount of data that needs to be transferred. However, it's essential to be careful when using pointers because they can also introduce security vulnerabilities such as buffer overflow and memory leaks.

In conclusion, pointers can be an efficient way to pass large amounts of data around in a program. They can reduce the overhead of memory allocation and copying and improve the performance of a program. However, it's important to use them carefully to avoid introducing security vulnerabilities and other issues.

To learn more about pointer, visit:

https://brainly.com/question/31666990

#SPJ11

Here is a list comprehension that solves the equation y = x^2 and prints out a list of [x,y] pairs. The domain for x is set to [-5, 5] and the range for y is set to [0, 10].

```python
result = [[x, x**2] for x in range(-5, 6) if 0 <= x**2 <= 10]
print(result)
```

The code above uses a list comprehension to generate the pairs of x and y values. It starts with the `for` loop that iterates through the domain of x values, which is set to [-5, 5]. Inside the loop, we use the expression `[x, x**2]` to generate a list containing the current value of x and its corresponding y value, which is calculated as `x**2`. We then use the `if` statement to filter out any pairs that don't fall within the specified range for y, which is set to [0, 10]. Finally, we print the resulting list of [x,y] pairs using the `print()` function.

Each sublist in the pairs list represents a [x, y] pair, where x is a number in the range [0, 10] calculated as the square of x, and y is the matching value in the range [-5, 5].

This list comprehension allows us to quickly and effectively build the desired list of [x, y] pairs without the use of explicit loops or manual element adding.

To know more about the `print()` function, click here;

https://brainly.com/question/30326485

#SPJ11

Two of the most common types of communications hardware are routers and network adapters.

1. Routers: Routers are essential devices used in computer networks to facilitate communication between different devices and networks. They receive data packets from the source device and determine the most efficient path for forwarding the packets to their destination. Routers are responsible for directing network traffic, establishing connections, and ensuring data packets reach the intended recipients. They play a crucial role in connecting multiple devices within a network and also enable communication between different networks, such as connecting a local network to the internet.

2. Network Adapters: Network adapters, also known as network interface cards (NICs), are hardware components that enable computers and devices to connect to a network. These adapters provide the physical interface between the computer and the network, allowing data transmission over the network medium, such as Ethernet or Wi-Fi. Network adapters can be integrated into the motherboard of a computer or added externally via expansion slots or USB ports. They translate digital signals from the computer into a format suitable for transmission over the network and vice versa, enabling the exchange of data between devices within a network.

Both routers and network adapters are integral components of communication infrastructure, facilitating the seamless transfer of data between devices and networks.

Learn more about Network adapters at https://brainly.com/question/30229896

#SPJ11

The statement "At the editing stage, the researcher makes a preliminary check for consistency" is true because  this process ensures that the data collected is accurate, reliable, and free from errors or inconsistencies before further analysis.

This involves reviewing the content and structure of the research work to ensure that it is coherent, logical, and consistent throughout. The researcher examines elements such as language usage, formatting, referencing style, and adherence to any specific guidelines or requirements. By conducting this preliminary check, the researcher can identify and address any inconsistencies or discrepancies before proceeding to the final version of the research work.

To learn more about formatting visit: https://brainly.com/question/17902049

#SPJ11

Simulation involves setting up a model of a real system and conducting repetitive experiments on it.

In simulation, a model is created to represent the behavior and characteristics of a real system. This model can be a mathematical representation, computer program, or a combination of both. By running the simulation with different inputs or scenarios, repetitive experiments can be performed to observe the system's behavior, analyze performance, and make predictions about its real-world counterpart.

Simulation allows researchers, engineers, and analysts to study complex systems, understand their dynamics, test different strategies, and evaluate various scenarios without the need for direct experimentation on the actual system. It provides a cost-effective and controlled environment for conducting experiments and exploring the behavior of systems under different conditions.

To learn more about simulation visit: https://brainly.com/question/15182181

#SPJ11

The symmetric encryption algorithm that is available in 128-bit, 192-bit, and 256-bit key versions is Advanced Encryption Standard (AES).

Advanced Encryption Standard (AES) is a symmetric encryption algorithm that uses a block cipher to encrypt data. It is a widely-used encryption standard that has been adopted by many organizations and governments around the world. AES supports key sizes of 128-bit, 192-bit, and 256-bit, and it is considered one of the most secure encryption algorithms available. It is used in a variety of applications, including secure communication protocols, data encryption, and file encryption.

In summary, the symmetric encryption algorithm available in 128-bit, 192-bit, and 256-bit key versions is Advanced Encryption Standard (AES). It is a highly secure encryption standard that is widely used in many applications.

To know more about cipher visit:
https://brainly.com/question/29585135
#SPJ11

Yes, the host with IP address 19.168.120.3 is in the same subnet as yours, given that your IP address is 19.168.104.2 and your netmask is 255.255.240.0.

The netmask of 255.255.240.0 corresponds to a /20 subnet, which means that the first 20 bits of the IP address are used to identify the network and the remaining 12 bits are used to identify the hosts within the network.
In binary, your IP address 19.168.104.2 is 00010011.10101000.01101000.00000010, and your netmask 255.255.240.0 is 11111111.11111111.11110000.00000000.
When these two values are bitwise ANDed together, we get the network address of your subnet: 00010011.10101000.01100000.00000000, which corresponds to the IP address 19.168.96.0.
Similarly, when we apply the same bitwise AND operation to the IP address 19.168.120.3 (00010011.10101000.01111000.00000011), we get the same network address of 19.168.96.0.
Therefore, both your IP address and the IP address 19.168.120.3 belong to the same /20 subnet and are on the same network.

Learn more about IP address link:

https://brainly.com/question/31026862

#SPJ11

The two hosting methods used in cloud environments are:

On-premises: This refers to hosting data and applications on a local computer or server that is owned and managed by the organization. This method involves maintaining physical hardware and software infrastructure on-site, which provides greater control and customization but requires more resources and expertise.

Off-premises: This refers to hosting data and applications on a server or servers that are located outside of the organization's premises, typically in a data center owned and operated by a cloud service provider. This method allows organizations to outsource infrastructure management and maintenance to a third-party provider, which can provide greater scalability, reliability, and security but may limit customization and control.

Learn more about hosting here:

brainly.com/question/32075281

#SPJ11

Shodan is a search engine used for finding and identifying internet-connected devices.

A password keeper is a software program that securely stores and manages passwords for various accounts.

A polyalphabetic cipher is a type of cipher that uses multiple alphabets to encrypt a message. Examples include the Vigenere cipher and the Playfair cipher.

A hash is a mathematical function that converts data into a fixed-size output, which is often used for data validation or storage.

A zero day exploit is a security vulnerability in software or hardware that is unknown to the vendor and can be exploited by attackers.

Public key encryption is a cryptographic method that uses two keys: a public key for encryption and a private key for decryption. It was invented by Whitfield Diffie and Martin Hellman in 1976. Public key encryption is widely used for secure communication over the internet, such as in HTTPS and SSH.

A hash is a mathematical function that converts data into a fixed-size output, which is often used for data validation or storage.

Passwords work by converting plain-text passwords into hash values, which are then compared to the stored hash values for authentication.

Social engineering is a type of attack that involves manipulating people into divulging confidential information or performing actions that compromise security.

The Enigma machine was a German encryption machine used during World War II, which was famously cracked by Alan Turing and his team at Bletchley Park.

Various forms of malware include worms, viruses, Trojans, ransomware, and spyware.

One of the most famous hacktivist groups is Anonymous, which is known for its decentralized structure and operations.

The length of a cryptographic key directly affects the difficulty of decryption. Longer keys generally provide stronger security but may also result in slower encryption and decryption times.

Learn more about software here:

brainly.com/question/985406

#SPJ11

Here's an implementation of the powerset problem using backtracking in a Python script called "powerset.py".

def backtrack_power_set(nums):

   subsets = []

   backtrack(nums, [], subsets, 0)

   return subsets

def backtrack(nums, current_set, subsets, start):

   subsets.append(current_set[:])  # Add a copy of the current set to subsets

   for i in range(start, len(nums)):

       current_set.append(nums[i])  # Include the current element

       backtrack(nums, current_set, subsets, i + 1)  # Recursively generate subsets starting from the next index

       current_set.pop() # Exclude the current element

# Example usage:

input_set = [1, 2, 3]

result = backtrack_power_set(input_set)

print(result)

In this implementation, the backtrack_power_set function takes an input set of numbers and returns the powerset as a list of subsets. It initializes an empty subsets list and calls the backtrack helper function to generate all possible subsets.

The backtrack function performs the backtracking algorithm. It first appends a copy of the current set to the subsets list. Then, it iterates over the remaining elements of the input set, starting from the start index. For each element, it adds it to the current_set, recursively calls backtrack to generate subsets with the next elements, and finally removes the last element from the current_set to backtrack and explore other possibilities.

You can save this code in a file named "powerset.py" and run it to test the powerset generation for different input sets.

To know more about backtracking, visit:

brainly.com/question/30035219

#SPJ11

Tags can be added by different steps in a word document 2016.

`

To add a tag to the properties of a Word document 2016, follow these steps:

1. Open the Word document that you want to add a tag to.

2. Click on the "File" tab located in the top left corner of the screen.

3. Click on "Info" in the menu on the left side of the screen.

4. Click on "Properties" located at the bottom of the right-hand panel.

5. Click on "Advanced Properties" at the bottom of the drop-down menu.

6. Click on the "Custom" tab in the dialog box that appears.

7. In the "Name" field, type the name of the tag you want to add.

8. In the "Value" field, type the value of the tag you want to add.

9. Click on "Add" to add the tag to the document properties.

10. Click "OK" to save the changes.

You can repeat this process to add multiple tags to the document properties. Adding tags to the document properties makes it easier to find and organize your documents.

To learn more about tags

https://brainly.com/question/30234072

#SPJ11

An array is a collection of same type of data. In most programming languages, the indexing of arrays starts from 0. This means that the index of the first element in the array "bestarray" will be 0.

To understand this better, let's break down the concept of an array. An array is a data structure that holds a fixed-size sequence of elements of the same data type. Each element in the array is assigned a unique index number that represents its position in the sequence.

So, in the case of the "bestarray" array, the first element would be assigned the index number 0, the second element would be assigned the index number 1, and so on, up to the last element with index number 1378.

Therefore, if you want to access or manipulate the first element in the array "bestarray", you can do so using the index number 0, like this:

bestarray[0]

This will retrieve the value of the first element in the array. Similarly, if you want to access the second element in the array, you can do so using the index number 1:

bestarray[1]

And so on, for all the other elements in the array.

To know more about array visit:

https://brainly.com/question/30757831

#SPJ11

The technical name for the situation described is method overloading.

Method overloading is a feature in object-oriented programming where multiple methods with the same name but different parameters are defined within a class. This allows for the use of the same method name to perform different operations based on the type or number of arguments passed. The compiler determines which specific method to invoke based on the arguments provided during the method call. Method overloading enhances code reusability and provides flexibility in handling different data types or variations of a particular operation within a class.

Learn more about method overloading here:

https://brainly.com/question/19545428

#SPJ11

A scenario that best represents the BACB (Behavior Analyst Certification Board) code of ethics requiring honesty and truthfulness in record-keeping would be:

Scenario:

Sarah, a behavior analyst, is working with a client named John who has autism. Sarah diligently keeps records of all her sessions with John, including the interventions implemented, progress notes, and any observations made during the sessions. She accurately documents the data collected, John's responses, and any changes in his behavior. Sarah ensures that her records reflect the actual events and outcomes of the sessions, without embellishment or distortion.

In this scenario, Sarah's commitment to honesty and truthfulness in her record-keeping aligns with the BACB code of ethics. She understands the importance of maintaining accurate and reliable records to ensure the highest quality of care for her client and to adhere to professional standards. Sarah's ethical approach helps maintain transparency, facilitates effective communication with other professionals involved in John's treatment, and supports evidence-based decision-making.

To know more about BACB , click here:

https://brainly.com/question/31984763

#SPJ11

The maximum number of virtual processors for each of the following Hyper-V guest servers depends on the version of Hyper-V being used.

For Hyper-V v3.0, the maximum number of virtual processors is 4.

For Hyper-V v3.5 and v3.5 SP1, the maximum number of virtual processors is 8.

For Hyper-V v4.0, the maximum number of virtual processors is 64.

For Hyper-V v4.1, the maximum number of virtual processors is 240.

For Hyper-V v4.2, the maximum number of virtual processors is 240.

For Hyper-V v4.3, the maximum number of virtual processors is 240.

For Hyper-V v4.4, the maximum number of virtual processors is 320.

For Hyper-V v5.0, the maximum number of virtual processors is 320.

To know more about hyper-V click-

https://brainly.com/question/30704116

#SPJ11

The third argument of the STL function count_if is a predicate function, so the correct option is (c) a predicate function.

In C++, the STL (Standard Template Library) provides various algorithms that operate on containers like vectors, arrays, lists, etc. One of these algorithms is count_if, which is used to count the number of elements in a container that satisfy a given predicate function. The predicate function is passed as the third argument to the count_if function. It should take one parameter, which represents an element of the container, and return a boolean value indicating whether that element satisfies the condition or not. The count_if function returns the number of elements in the container for which the predicate function returns true.

Option C is answer.

You can learn more about STL function at

https://brainly.com/question/17427047

#SPJ11