Before an experiment, a scientist obtains 2.45 L of 1.25 M sulfuric acid (H₂SO4) and
dilutes it until the molarity drops to 0.80 M. What is the volume of the new solution?

1 mole of iron reacts with 2 moles of hydrochloric acid to produce 1 mole of hydrogen gas; therefore, the amount of H₂ produced depends on the amount of iron reacted and the stoichiometry of the reaction.

According to the balanced chemical equation, 1 mole of iron reacts with 2 moles of hydrochloric acid to produce 1 mole of hydrogen gas. Therefore, the amount of hydrogen gas produced by the complete reaction of an iron bar will depend on the amount of iron reacted.

To determine the amount of hydrogen gas produced, we need to know the amount of iron reacted. This can be calculated from the mass of the iron bar using its molar mass. Once we know the amount of iron reacted, we can use the stoichiometry of the reaction to determine the amount of hydrogen gas produced.

For example, if we assume that the iron bar has a mass of 1.0 g, we can calculate the number of moles of iron using its molar mass of 55.85 g/mol:

1.0 g Fe x (1 mol Fe/55.85 g Fe)

= 0.0179 mol Fe

Since the stoichiometry of the reaction is 1:2 (1 mole of iron reacts with 2 moles of hydrochloric acid), we can calculate the amount of hydrogen gas produced by multiplying the number of moles of iron by 2:

0.0179 mol Fe x (1 mol H₂/1 mol Fe) x (22.4 L H2/mol H₂)

= 0.802 L H₂

Therefore, the complete reaction of the iron bar with hydrochloric acid would produce 0.802 L of hydrogen gas, assuming that the iron bar has a mass of 1.0 g.

To learn more about complete reaction, here

https://brainly.com/question/20371723

#SPJ1

Answer:

To solve this problem, we can use the formula:

q = -Ccalorimeter x ΔT

where q is the heat absorbed by the calorimeter, Ccalorimeter is the heat capacity of the calorimeter, and ΔT is the change in temperature of the calorimeter.

First, we need to calculate the amount of heat released by the combustion of diborane. We can use the molar mass of diborane to convert the given mass to moles:

moles of diborane = 0.491 g / 27.66 g/mol = 0.01775 mol

The heat released by the combustion of 1 mole of diborane is -1958 kJ, so the heat released by the combustion of 0.01775 mol is:

q = 0.01775 mol x (-1958 kJ/mol) = -34.76 kJ

The negative sign indicates that heat is released by the reaction.

Now we can use the formula above to find the change in temperature of the calorimeter:

-34.76 kJ = -7.854 kJ/°C x ΔT

ΔT = 4.43°C

Therefore, the final temperature of the calorimeter is 19.63°C - 4.43°C = 15.20°C.

The concept molarity is an important method which is used to calculate the concentration of a solution. It is mainly employed to find out the concentration of a binary solution. Here the molarity is 0.67 M. The correct option is D.

The molarity of a solution is defined as the number of moles of the solute dissolved per liter of the solution. It is represented by the letter 'M' and it is expressed in the unit mol / L.

Molarity = Number of moles of solute  / Volume of solution in liters

M = 0.500 / 0.75 = 0.66 mol / L ≈ 0.67 M

Thus the correct option is D.

To know more about molarity, visit;

https://brainly.com/question/16727614

#SPJ1

Answer: 2.31 L

Explanation:

charles law  v2= V1 x T2/T1

temperature must be in Kelvin

V2=2.5 X 298.15 / 323.15 =2.31 L

11. The concentration of C is 200

12. The concentration of B is 0.4

Equilibrium constant, K is defined as follow:

nReactant ⇌ mProduct

Equilibrium constant, K = [Product]ᵐ / [Reactant]ⁿ

With the above formula, we can obtain the equilibrium concentration of the missing substance as follow:

11. For concentration of C

K = [C] / [A][B]

20 = [C] / (2 × 5)

20 = [C] / 10

Cross multiply

[C] = 20 × 10

Concentration of C, [C] = 200

12. For concentration of B

K = [C] / [B]

10 = 4/ [B]

Cross multiply

10 × [B] = 4

Divide both sides by 10

[B] = 4 / 10

Concentration of B, [B] = 0.4

Learn more about equilibrium concentration:

https://brainly.com/question/15691608

#SPJ1

Complete question:

Find the concentration of the missing substance

11) A + B = C

K = 20

[A] = 2

[B] = 5

[C] =?

12) A(s) + B(ag) = C(g)

K = 10

[C] = 4

[B] = ?

The percent yield is 172.5%. This is greater than 100% due to experimental errors such as incomplete reaction or loss of product during the experiment.

To determine the limiting reactant, we need to find the number of moles of each reactant:

92.4 L of H2 at STP (standard temperature and pressure: 0°C and 1 atm) is 92.4/22.4 = 4.12 moles of H2.

168.0 g of P4 is 168.0/123.9 = 1.36 moles of P4.

Using the balanced chemical equation, we can see that 1 mole of P4 reacts with 6 moles of H2 to produce 4 moles of PH3. Therefore, the maximum amount of PH3 that can be produced from 1.36 moles of P4 is:

1.36 mol P4 × (4 mol PH3/6 mol H2) × (4 mol PH3/1 mol P4) = 1.09 mol PH3

Since this is less than the maximum amount of PH3 that can be produced from 4.12 moles of H2:

4.12 mol H2 × (4 mol PH3/6 mol H2) = 2.75 mol PH3

we can conclude that H2 is the limiting reactant.

To calculate the theoretical yield of PH3, we use the amount of limiting reactant, which is 4.12 moles of H2:

4.12 mol H2 × (4 mol PH3/6 mol H2) × (1 L/22.4 mol) = 0.733 L of PH3 at STP

The actual yield is given as 44.7 L of PH3 at STP, which is converted to moles using the ideal gas law:

PV = nRT

(1 atm) × (44.7 L) = n × (0.08206 L atm mol^-1 K^-1) × (273.15 K)

n = 1.88 moles of PH3

The percent yield is then calculated as:

(actual yield/theoretical yield) × 100% = (1.88 mol/1.09 mol) × 100% = 172.5%

For more question on percent yield click on

https://brainly.com/question/2451706

#SPJ11

The pressure inside the container is approximately 5.43 atmospheres.

The Ideal gas law or general gas equation is expressed as;

PV = nRT

Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant ( 0.08206 Latm/molK )

Given that:

Amount of gas n = 43 moles

Volume V = 260 Liters

Temperature K = 400 K

Pressure P = ?

To determine the pressure of the gas, plug the given values into the above formula and solve for pressure.

PV = nRT

P = nRT / V

P = ( 43 × 0.08206 × 400 ) / 260

P = 1411.432/260

P = 5.43 atm

Therefore, the pressure of the gas is 5.43 atm.

Learn more about Ideal Gas Law here: brainly.com/question/4147359

#SPJ1

sign of ∆H :-

We know

when methane burns in presence of oxygen heat is released as a form of energy so the reaction is exothermic.∆H must be -ve

#2

The concentration of the solution in molarity, given that 6.802×10²⁰ particles were dissolved in 0.38 L of water is 3.0×10⁻³ M (option B)

First, we shall determine the number of mole that contains 6.802×10²⁰ particles of Mn(NO₃)₃. Details below:

From Avogadro's hypothesis,

6.022×10²³ particles = 1 mole of Mn(NO₃)₃

Therefore, we can say that

6.802×10²⁰ particles = 6.802×10²⁰ / 6.022×10²³

6.802×10²⁰ particles = 0.001 mole of Mn(NO₃)₃

Finally, we shall obtain the molarity of the solution. Details below:

Molarity of solution = mole / volume

Molarity of solution = 0.001 / 0.38

Molarity of solution = 3.0×10⁻³ M (option B)

Learn more about molarity:

https://brainly.com/question/16073358

#SPJ1

With no electrical energy available, conduction would most likely provide enough thermal energy to heat the hermit’s cabin.

Thermal energy is defined as a type of energy which is contained within a system which is responsible for temperature rise.Heat is a type of thermal energy.It is concerned with the first law of thermodynamics.

Thermal energy arises from friction and drag.It includes the internal energy or enthalpy of a body of matter and radiation.It is related to internal energy and heat .It arises when a substance whose molecules or atoms are vibrating faster.

Learn more about thermal energy,here:

https://brainly.com/question/3022807

#SPJ1

Answer:

Related questions

What assumption is made during the relative dating of fossils?

the rule of superposition

In relative dating, to determine the relative age, geologists believe that, in a sequence of superficial layers, the newer layers fall on top of older ones unless any physical disturbance such as soil erosion happens. Scientists call this the rule of superposition, and it is the central assumption in relative dating

Answer:

high tides are a little higher and low tides are a little lower than average

Explanation:

A spring tide is the highest tide (when the greatest difference between the high and low tides). This happens during the new and full moon.

Answer: It's worth noting that low tides can sometimes be lower than usual, which is referred to as spring tides. Despite its name, this phenomenon isn't related to spring and has a different historical origin.

The volume (in liters) of oxygen gas, O₂ that will be needed for the above reaction at STP is 35 liters (option A)

The volume of oxygen gas needed for the reaction can be obtain as shown below:

Balanced equation:

2C₂H₆(g) + 7O₂(g) —> 4CO₂(g) + 6H₂O(g)

From the question given above, we were told that the reaction occur at standard temperature and pressure, STP. Thus we can obtain the volume of oxygen needed as follow::

2 liters of C₂H₂ reacted with 7 liters of O₂

Therefore

10 liters of C₂H₂ will react = (10 liters × 7 liters) / 2 liters = 35 liters of O₂

Thus, we can conclude that the volume of oxygen gas needed for the reaction is 35 liters (option A)

Learn more about volume:

https://brainly.com/question/9614052

#SPJ1

The chemical structure of the compound is shown in the image attached.

Ascertain the molecule's atomic composition and the types of bonds (covalent, ionic, etc.) that each atom forms.

The skeletal structure, which is a straightforward illustration of the molecule's framework, should be drawn first. To do this, a series of lines are drawn to symbolize the atoms' bonds.

By positioning the atoms at the ends of the bond lines, you may complete the skeleton framework.

Learn more about chemical structure:https://brainly.com/question/30261824

#SPJ1

Answer:

41826.05 Calories

Explanation:

1 J = 0.239006 Calories

175 KJ

= 175 x 1000 J

= 175000 J

175000 J to Calories

= 175000 x 0.239006

= 41826.05 Calories

Answer: 41.8

Explanation:

Acellus verified ✅

:Response: 2.21 atm The ideal gas law says that the pressure of a gas is equal to the quantity of the gas times the universal gas constant (R) times the temperature (T) times the volume (V) divided by the number of moles in the gas.

Consequently, we may apply the following equation to this issue: P = (n*R*T)/V. We may get the pressure of the gas in atmospheres by using the following formula, where n is the number of moles, V is the volume, T is the temperature, and R is the universal gas constant.

P is equal to 2.21 atm or (3.43 mol*0.0821 L*atm/mol*K*492.15 K)/27.17 L. As a result, choice A) 2.21 atm is the right one.

Learn more about  temperature at:

https://brainly.com/question/15267055

#SPJ1

Answer:

approx 7.41 sextillion

Explanation:

One mole of any substance contains 6.022 x 10^23 particles (Avogadro's Number). Therefore, 1 mole of water contains 6.022 x 10^23 water molecules.

To find how many moles are represented by 7.43 x 10^18 molecules of water, we can divide 7.43 x 10^18 by Avogadro's Number:

7.43 x 10^18 / 6.022 x 10^23 = 0.0123 moles of water

Now, we can use this to find the number of water molecules:

0.0123 moles x 6.022 x 10^23 molecules/mole = 7.41 x 10^21 molecules of water

Therefore, 7.43 x 10^18 molecules of water represent 7.41 x 10^21 molecules or approximately 7.41 sextillion (7,410,000,000,000,000,000) molecules of water.

The model would be complete when there two pairs of white dots and one pair of black dots

The chemical process of electrolysis breaks down water molecules into their component parts, hydrogen  and oxygen , using an electric current. Two simultaneous reactions take place at distinct electrodes, referred to as the anode and cathode, which are submerged in an electrolyte solution, to produce this process.

A crucial step in the process of creating hydrogen gas, a clean and renewable energy source, is the electrolysis of water.

Learn more about electrolysis:https://brainly.com/question/12054569

#SPJ1

Answer:

22°C + 14.82°C = 36.82°C

Explanation:

We can use the formula:

q = mCΔT

where q is the heat absorbed by the water, m is the mass of the water, C is the specific heat of water, and ΔT is the temperature change of the water.

We are given q = 12,357 J, m = 234.2 g, and an initial temperature of 22C. The specific heat of water is 4.184 J/(g·°C).

Plugging in the numbers, we get:

12,357 J = (234.2 g)(4.184 J/(g·°C))(ΔT)

Solving for ΔT, we get:

ΔT = 14.82°C

Therefore, the final temperature of the water would be:

22°C + 14.82°C = 36.82°C

If a dilute solution of hydrochloric acid (HCl) is electrolyzed, the gas produced at the anode (positive electrode) will be chlorine gas (Cl₂). When a dilute solution of hydrochloric acid (HCl) is electrolyzed, it undergoes a process called electrolysis.

In the case of hydrochloric acid, it dissociates into hydrogen ions (H+) and chloride ions (Cl-). The positive hydrogen ions (H+) are attracted to the cathode (negative electrode) and are involved in the reduction reaction. At the cathode, hydrogen gas (H₂) is produced as a result of the reduction of H+ ions. At the anode (positive electrode), the chloride ions (Cl-) are attracted. Here, the chloride ions undergo oxidation, losing electrons and forming chlorine gas (Cl₂). The chlorine gas is released as a product of the reaction at the anode.

Learn more about the gas here

https://brainly.com/question/28392063

#SPJ1

It is essential to consult a healthcare professional before taking any medication when experiencing indigestion or any other health condition, to ensure that the medication is safe and effective for the patient's specific needs.

It is not advisable to use drug S when a patient has indigestion problem because drug S may worsen the patient's condition or interact negatively with other medications they are taking. Indigestion is a common condition that occurs when there is an imbalance in the digestive system, causing discomfort, bloating, and nausea. Some drugs can exacerbate these symptoms by increasing the production of stomach acid or by irritating the lining of the digestive tract. Drug S may have side effects that include gastrointestinal disturbances, including stomach pain, nausea, and diarrhea. This can make indigestion symptoms worse and lead to further discomfort and distress for the patient. Additionally, drug S may interact negatively with other medications that the patient is taking, further worsening their indigestion. Therefore, it is essential to consult a healthcare professional before taking any medication when experiencing indigestion or any other health condition, to ensure that the medication is safe and effective for the patient's specific needs.

For more such questions on medication

https://brainly.com/question/15267625

#SPJ11

The order of a reaction is determined experimentally and describes the relationship between the rate of a reaction and the concentration of reactants, whereas the molecularity of a reaction is a theoretical concept that describes the number of molecules that participate in the rate-determining step of a reaction.

The order of a reaction is the mathematical representation of the relationship between the rate of a reaction and the concentration of reactants. It describes how the rate of a reaction changes with respect to the change in concentration of reactants.

The order of a reaction is determined experimentally by observing how the rate of a reaction changes as the concentration of reactants is varied while keeping the concentration of other reactants and conditions constant. The order of a reaction can be 0, 1, 2, or even a fraction.

The molecularity of a reaction ​is the number of reactant molecules that collide in a single step to form the product. The molecularity of a reaction can be unimolecular (1), bimolecular (2), or termolecular (3). It is important to note that not all reactions have a molecularity, as some reactions have multiple steps and multiple reactants involved.

know more about molecularity here:

https://brainly.com/question/14834070

#SPJ11

The expressions that would cause a DECREASE in energy  are

A. DECREASING both wave frequency and wavelength

B. DECREASING the wave frequency and INCREASING thewavelength

The number of complete wavelengths  that can be found in the unit of time  can be regarded as thefrequency (f) , however when the wavelength increases in size, then the frequency as well as the energy (E) decrease. .

It should be noted that the the frequency increases, the wavelength gets shorter, hence as the frequency decreases, there there would be increase in wavelength .

Learn more about energy at:

https://brainly.com/question/13881533

#SPJ1

comlete question;

Which of these would cause a DECREASE in

energy?

A. DECREASING both wave frequency and wavelength

B. DECREASING the wave frequency and INCREASING the

wavelength

C. INCREASING both wave frequency and wavelength

D. INCREASING the wave frequency and DECREASING the

wavelength

INCREASING the wave frequency DECREASING the wavelength

The final volume when 0.694 L of a 36.2% (m/v) solution is diluted to 20.3% (m/v) is approximately 1236 mL.

To calculate the final volume in milliliters when a solution is diluted, we can use the formula:

(V1)(C1) = (V2)(C2),

where V1 is the initial volume, C1 is the initial concentration, V2 is the final volume, and C2 is the final concentration.

In this case, we have:

V1 = 0.694 L (initial volume)

C1 = 36.2% (m/v) (initial concentration)

C2 = 20.3% (m/v) (final concentration)

We need to solve for V2, the final volume.

Using the formula, we can rearrange it to solve for V2:

V2 = (V1)(C1) / C2

Substituting the given values:

V2 = (0.694 L)(36.2% (m/v)) / 20.3% (m/v)

Calculating this expression, we find:

V2 = (0.694 L)(0.362) / 0.203

V2 = 1.23628 L

Since the question asks for the final volume in milliliters, we convert the result to milliliters by multiplying by 1000:

V2 = 1.23628 L × 1000 mL/L

V2 ≈ 1236 mL

Therefore, the final volume when 0.694 L of a 36.2% (m/v) solution is diluted to 20.3% (m/v) is approximately 1236 mL.

Know more about diluted here:

https://brainly.com/question/27097060

#SPJ11

The degree of proximity between a measured value and the actual value can be defined as Accuracy.

Precision is one that is used to know the level of uniformity present in a group of measurements that are repeated multiple times.

The Possible sources of error in the above experiment can be :

By conducting an experiment and comparing the outcome of the heat of reaction with the accepted value presented in a textbook or table, it is possible to compute the percentage of deviation. The percentage deviation can either be positive or negative and represents whether the experimentally obtained value is higher or lower than the accepted value, respectively.

Each mistake has the potential to result in an excessive or inadequate level of heat for the individual reaction. The  Insufficient execution of the procedure can impact the individual reaction's thermal energy.

Read more about experimental errors here:

https://brainly.com/question/30902981

#SPJ1

We need 0.798 g of copper (ll) sulfate and 0.400 g of sodium hydroxide to make a 50.0 mL of a 0.100 M solution of each reactant.

To determine the amount of solute needed to make a 50.0 mL of a 0.100 M solution of each reactant when using copper (ll) sulfate and sodium hydroxide, we need to use the formula:

Molarity (M) = moles of solute ÷ volume of solution (in liters)

First, we need to calculate the number of moles of solute needed. Since the molar ratio of copper (ll) sulfate to sodium hydroxide is 1:2, we will need twice as many moles of sodium hydroxide as copper (ll) sulfate.

Let's start with copper (ll) sulfate:

Molarity (CuSO4) = 0.100 M

Volume (V) = 50.0 mL = 0.0500 L

Using the formula, we can rearrange it to solve for moles of solute:

moles of CuSO4 = Molarity × Volume

moles of CuSO4 = 0.100 M × 0.0500 L

moles of CuSO4 = 0.00500 mol

Next, we can calculate the number of moles of sodium hydroxide needed:

moles of NaOH = 2 × moles of CuSO4

moles of NaOH = 2 × 0.00500 mol

moles of NaOH = 0.0100 mol

Now that we know the number of moles of each solute needed, we can calculate the mass of each solute needed using their respective molar masses:

mass of CuSO4 = moles of CuSO4 × molar mass of CuSO4

mass of CuSO4 = 0.00500 mol × 159.61 g/mol

mass of CuSO4 = 0.798 g

mass of NaOH = moles of NaOH × molar mass of NaOH

mass of NaOH = 0.0100 mol × 40.00 g/mol

mass of NaOH = 0.400 g

Therefore, we need 0.798 g of copper (ll) sulfate and 0.400 g of sodium hydroxide to make a 50.0 mL of a 0.100 M solution of each reactant.

For more such questions on sodium hydroxide

https://brainly.com/question/13041783

#SPJ11

It's never a good idea to use your credit card when experiencing strong emotions, especially if you tend to steer toward 'retail therapy.

Answer:

Rubidium (Rb)

Explanation:

Sb: 206pm

As: 185pm

Rb: 303pm

Ba: 268pm

Answer:

12 degrees

Explanation:

In 0.8291 moles of hexane ([tex]C_6H_1_4[/tex]) there are 20.8 liters in 0.8291 moles of hexane at room temperature and atmospheric pressure.

To determine the number of liters in 0.8291 moles of hexane (C6H14), we need to use the ideal gas law equation:

PV = nRT

where:

P = pressure (atm)

V = volume (L)

n = moles of gas

R = gas constant (0.0821 L*atm/mol*K)

T = temperature (K)

We need to rearrange this equation to solve for V:

V = nRT/P

First, we need to calculate the number of moles of hexane:

n = mass/molar mass

The molar mass of hexane (C6H14) is:

6(12.01 g/mol) + 14(1.01 g/mol) = 86.18 g/mol

n = 0.8291 moles

Next, we need to convert the temperature to Kelvin. Assuming room temperature (25°C or 298 K):

T = 298 K

Finally, we need to assume a pressure value. Let's assume atmospheric pressure (1 atm).

P = 1 atm

Now we can plug in the values and solve for V:

V = (0.8291 mol)(0.0821 L*atm/mol*K)(298 K)/(1 atm)

V = 20.8 L

Therefore, there are 20.8 liters in 0.8291 moles of hexane at room temperature and atmospheric pressure.

For more details regarding ideal gas law, visit:

https://brainly.com/question/28257995

#SPJ1