Below is the amino acid histidine at pH 7. Select all the atoms that are part of a plane of three or more atoms.

a. To calculate the density of a substance, divide its mass by its volume. In this case, the density would be:

0.100 g / 10.00 ml = 0.01 g/ml

The density has two significant figures, as it was given in the question.

b. To calculate the molar mass of Ag2O, you would need to know the atomic masses of silver (Ag) and oxygen (O) and multiply them by the number of atoms of each element in the compound. Ag2O is made up of 2 atoms of silver and 1 atom of oxygen, so the molar mass would be:

(2 x 107.87 g/mol) + (1 x 16.00 g/mol) = 231.87 g/mol

The molar mass has four significant figures, as it was calculated using the given atomic masses.

c. The following burette measurements were collected for a titration experiment:

Initial burette reading: 0.300 ml.

Final burette reading: 23.45 ml.

The volume of solution used in the titration would be the difference between the final and initial burette readings, which is:

23.45 ml - 0.300 ml = 23.15 ml

To learn more about burette measurements:

https://brainly.com/question/28353349

#SPJ4

Sulfosalicylic acid is a secondary method that can be used to determine the presence of Protein in urine.

Sulfosalicylic acid (SSA) is a secondary method that can be used to determine the presence of proteins in urine if colour interference prevents the accurate reading of a urine chemical reagent strip. The reagent strip is a primary screening method for detecting proteins in urine, but certain substances can cause colour interference and make it difficult to accurately interpret the results. In these cases, SSA can be used as a confirmatory test.

The SSA test works by precipitating proteins in the urine sample. The resulting protein precipitate is then centrifuged and the supernatant is removed. The protein pellet is dissolved in a small amount of acid and the solution is then analyzed spectrophotometrically.

Learn more about Protiens here: https://brainly.com/question/13734713

#SPJ4

One of five fundamental types can be applied to a wide variety of chemical processes.To accurately forecast the byproducts of an unknown reaction, a detailed grasp of various kinds of reactions is helpful.

To learn more about chemical reactions refer

https://brainly.com/question/11231920

#SPJ1

A chemical reaction of sulfur dioxide (SO2) with other nitrogen compounds which form sulfuric acid (H2SO4), will fall to the earth as acid rain.

Acid rain is any form of precipitation with acidic components, such as sulfuric or nitric acid that fall to the ground from the atmosphere. This can include rain, snow, fog, or even acidic dust.  

Acid rain results from SO2 and NOx which react with water, oxygen, and other chemicals to form sulfuric and nitric acids.  These mix with water and other materials in the air before falling to the ground.

The chemical reaction of acid rain is as follows.

[tex]SO_{3} + H_{2} O -- > H_{2} SO_{4}[/tex] (sulfuric acid)

[tex]NO_{x} + H_{2} O -- > 2HNO_{3}[/tex] (nitric acid)

A source of SO2 and NOx that cause acid rain comes from burning fossil fuels, vehicles, manufacturing, and volcanoes.

Thus, acid rain can happen as there are interactions between SO2 and NOx with water, forming sulfuric or nitric acid.

Learn more about acid rain by clicking this link :

https://brainly.com/question/11543614

#SPJ4

D. Distillation, because the liquids would boil at different temperatures owing to the difference in the strength of their intermolecular forces.

Key points:

Learn more about Distillation here:

https://brainly.com/question/24553469

#SPJ4

Yes, the Toxic Substances Control Act (TSCA) requires firms to keep and maintain records of employee exposure to toxic chemicals.

Toxic chemicals are chemical compounds that are harmful to humans, animals and the environment. They can be found in food, water, air, soil, and consumer products.

Employers must also ensure that these records are made available to workers and their representatives, as well as to the Environmental Protection Agency (EPA). The records must be kept for at least 30 years and must include information such as the names of all employees exposed to the toxic chemicals, the chemicals to which they were exposed, the duration of their exposure, and the results of any tests that have been conducted. Additionally, firms must have a system in place to notify employees of any health risks associated with their exposure to the toxic chemicals.

To learn more about toxic chemical
https://brainly.com/question/20737533
#SPJ1

Answer:

To calculate the volume of the piece of iron, we need to divide its mass by its density. But first, we need to express the density in the same units as the mass, which is kg/dL. To do this, we need to convert the density from g/cm3 to kg/dL.

1 cm3 = 1 mL = 0.001 L

1 dL = 0.1 L

Therefore, 1 cm3 = 0.001 L = 0.1 dL

Also, 1 g = 0.001 kg

Therefore,

density in kg/dL = (density in g/cm3) * (1 kg/1000 g) * (0.1 dL/1 cm3)

= 7.86 g/cm3 * 0.001 kg/g * 0.1 dL/cm3

= 0.00786 kg/dL

Now we can use this density to calculate the volume of the piece of iron:

Volume = mass / density

= 4.62 kg / 0.00786 kg/dL

= 5892.9 dL

So, the volume of the piece of iron is 5892.9 dL.

Syringes, catheters, and other items that cannot tolerate high heat or contact with liquids during the sterilization process are frequently sterilized using ethylene oxide (EtO).

The chemical compound ethylene oxide, also known as EO or EtO, has the formula C2H4O. It is a tasteless, ether-like gas that is combustible and colorless.

Packaging can be penetrated by ethylene oxide gas, which can also sanitize contents without endangering them. Although it is a liquid, 70% isopropyl alcohol solution is also used to sterilize medical devices; however, this solution is often sprayed on surfaces outside of the packaging. It is uncommon to sterilize medical equipment using phenol derivatives or cationic detergent. It is crucial to remember that EtO is a hazardous gas and should only be handled by qualified individuals in an environment with adequate ventilation.

To know more about ethylene oxide, visit:

brainly.com/question/28303854

#SPJ4

The polarity of the bond expressed in terms of the dipole moment. which is given the symbol mu and which will takes into account not only the electronegativity difference between the two bonded elements but also for  the distance between their centers.

A polar covalent bond is meant to have the dipole, which exists whenever the opposite charges are separated from the each other.

The polarity of the bond will be expressed in terms of the dipole moment, which is given the symbol mu and which will takes into the account not only for the electronegativity difference between the two bonded elements but also for  the distance between their centers. The Covalent bonds are formed by the sharing of the electrons between the two atoms. The molecule with the dipole moment zero are non polar molecule.

The question is incomplete, the complete question is :

A polar covalent bond is said to have a dipole, which exists whenever opposite charges are separated from each other. The polarity of the bond can be expressed in terms of a dipole _____, which is given the symbol "mu" and which takes into account not only the ___ difference between the two bonded elements but also the ____ between their centers.

To learn more about polar bond here

https://brainly.com/question/14992889

#SPJ4

Answer:

E. Cleavage of diamonds is a random property and differs from stone to stone.

Answer:

Pb(NO3)2+K2CrO4=2KNO3+PbCrO4

A peptide bond is a covalent link produced by one amino acid's carboxyl group (-COOH) and another amino acid's amino group (-NH2). A condensation process.

between the two groups produces a molecule of water (H2O) and a peptide bond (-CO-NH-). The peptide bond has a planar, partial double bond structure. This signifies that the electrons in the bond are distributed evenly across the two atoms, although not all orbitals are involved in bonding. In the creation of polypeptide sequences, the peptide bond is critical. It connects individual amino acids to form a chain of amino acids capable of folding into specified three-dimensional structures. The function of these structures is determined by them.The polypeptide is a kind of protein. The peptide bond also permits the polypeptide to be flexible, which is necessary for its proper activity.The initial amino acid in a peptide is known as the N-terminal (NH2) residue, while the last amino acid is known as the C-termina.

learn more about molecule  here:

https://brainly.com/question/19922822

#SPJ4

On the periodic table of the elements, mercury (Hg) has an atomic number of 80 and a mass number of 200.59. It has seven stable isotopes. The most abundant of these probably have more than 80 neutrons each

Isotopes are atoms with the same number of protons or atomic umber, but differing numbers of neutrons. They differ in mass, which affects their physical characteristics even if they have nearly identical chemical properties.

There is no elemental decay in stable isotopes. In contrast, unstable radioactive isotopes, like 14C, will decay into other elements.

Since number of proton and neutron makes the mass number which is 200.59. and number of proton is already 80 hence number of neutron should be above 80 to meet up with the 200.59

Learn more about mass number at:

https://brainly.com/question/28409714

#SPJ1

Answer:

The surface area of a shot piece of zinc would be 4.01 cm2, while the surface area of a zinc granule would be 0.30 cm2. To calculate the surface area of a cylinder, you would use the formula 2(pi)r2 + 2(pi)rh, where r is the radius of the cylinder and h is its height. For a shot piece of zinc, with a diameter of 7.5 mm and a height of 2.0 mm, the radius is 3.75 mm and the surface area is 4.01 cm2. For a zinc granule, with a diameter of .84 mm, the radius is .42 mm and the surface area is 0.30 cm2.

The strongest nucleophile is C: NH3.

The strongest nucleophile is the compound that can donate its electrons the most effectively to form a covalent bond with an electron-deficient species (electrophile).

Out of the compounds listed, NH3 is the strongest nucleophile. This is because nitrogen atoms in NH3 have an unshared pair of electrons that are highly polarized and readily available for bonding.

Methoxide (MeO-) is a nucleophile, but it is less basic than NH3 because the oxygen atom is an electron-withdrawing group and is less able to donate electrons.

Methanol (MeOH) is not a nucleophile, as it does not have a lone pair of electrons that can be used for bonding.

Methyl (Me-) is not a nucleophile as it is not a compound, a methyl is just a functional group that can be bound to various atoms or molecules, but it doesn't have any electron pair to donate.

So NH3 is the strongest nucleophile.

You can learn more about strongest nucleophile at

https://brainly.com/question/27548316

#SPJ4

Lithium sulfide and cobalt (III) bromide are mixed in equimolar solutions. Chemical equation that is balanced:

In the equation CoBr3(aq) + Li2S(aq) ---> LiBr(aq) + CoS(s), each component can be identified as follows:

In this reaction, cobalt (III) bromide and lithium sulfide react to form lithium bromide and cobalt sulfide. The reactants are equimolar solutions, meaning that there are equal amounts of each reactant. When the two solutions are mixed, the cobalt (III) ions and lithium ions come into contact and form an ionic bond, which results in the formation of new solid cobalt sulfide and aqueous lithium bromide.

Learn more about balanced chemical equation here: brainly.com/question/11904811

#SPJ4

The rank order of acidity is para nitro phenol > meta nitro phenol > phenol > Para amino phenol.

The nitro group is a powerful electron withdrawing group. As a result, by removing electron density from the carboxylate ion, it increases the acidity of benzoic acid. This effect is strongest when the nitro group is in the ortho position (the effect is known as ortho effect).

The chemical structure of an acid can be used to predict its relative strength. An acid is generally stronger when the H-A bond is more polar. When the H-A bond is weaker and the conjugate base, A, is more stable, acidity increases.

Thus, The rank order of acidity is para nitro phenol > meta nitro phenol > phenol > Para amino phenol.

To learn more about acidity order, follow the link;

https://brainly.com/question/9423359

#SPJ1

You may use the following equation to get each stream's mass flow rate: concentration times flow rate equals mass flow rate. Mass flow rate for Stream 1 is 300 mm (heparin) times flow rate determine by other means

The amount of fluid passing through a pipe or other conduit in a specific amount of time is measured as the flow rate. It is frequently expressed in terms of volume/time, such as gallons/minute or cubic meters/second. Numerous variables, such as the pipe's size and form, the fluid's pressure, and its viscosity, can have an impact on the flow rate. In some circumstances, the flow rate may be managed by valves or other equipment like flow metres or pumps. Numerous sectors, including water treatment, oil and gas extraction, and manufacturing, depend on knowing and managing flow rate. such as cubic feet per second (cf/s) or

Learn more about flow rate here:

https://brainly.com/question/27880305

#SPJ4

Answer:

2nd and 3rd

Explanation:

A K-value >> 1 typically indicates a lot more of the product (in this case B) than the reactants. So K = 7000 and K = [tex]8*10^5[/tex] matches that description.

The fill in the blanks is as follows :

a) Sodium and chloride ions

b) Chloride ions

c) Sodium ions

a) When sodium chloride, NaCl , dissolves in the water, the solution contains sodium and chloride ions in the addition to the water solvent.

b) The partial charges in the water help to dissolve the compound as the hydrogen end of the water is attracted to the chloride ions and the oxygen end is attracted to the sodium ions.

The Sodium chloride (NaCl) is an ionic compound. The sodium chloride is formed by the ionic bond. the ionic bond is formed between the negatively charged ion and the positively charged ion.

To learn more about sodium chloride here

https://brainly.com/question/24188706

#SPJ4

C. Pipet Analytical balance,It is expected that the accuracy of the following equipment will be examined depending on the equipment listed: Thermometer Graduated Cylinder Thermometer Buret C.

Pipet Analytical balance, part E These tools are frequently used in scientific experiments to measure volume, temperature, and weight. It's also crucial to understand the difference between accuracy and precision. While precision refers to the reproducibility of a series of measurements, accuracy relates to how near a measurement is to the real value of the quantity being measured.While 10 ml graduated cylinders feature marks every tenth of a milliliter, most 50 ml graduated cylinders have markings spaced every milliliter. Our measurement should be more precise if we use a 10 ml graduated container than if we use a 50 ml graduated container. We refer to an instrument as being ACCURATE if it produces values that are extremely near to the genuine value. Example: The same sample was measured three times using a graduated cylinder, yielding readings of 566 mL, 584 mL, and 541 mL. These three figures add out to 563.7 mL on average.

learn more about cylinder  here:

https://brainly.com/question/16134180

#SPJ4

OTs is a functional group formed by losing hydrogen of p-toluene sulphonic acid. This is a good leaving group, because of the presence of a stable resonance structure.

Here when CH3-CH2-CH2-CH2-OTs reacts with NaBr, a substitution reaction happens. The OTs group is substituted by Br and tosylate is released. DMF or dimethyl formamide used as solvent in such reactions. The main reaction of substitution of bromine to tosylate group is that the conjugate base is quite stable because of the three resonance structures.

Alcohols usually are not prone to substitution reactions. So it is converted to a tosyl or mesyl substitute, so that it is easier to convert it into an alkyl halide. The main benefit of such reactions is that it can be carried out without drastic pH conditions.

So, tosylate acts as a good leaving group in halide substitution reactions.

For more information about substitution reaction on alcohols, kindly refer

https://brainly.com/question/29697459

#SPJ4

The graphic would have a similar plot of a 1.0-g sample of compound 2 appear because compound 2 has a higher molecular weight than compound 1.

The ideal gas law, also called the general gas equation, is the equation of the state of a hypothetical ideal gas.

The ideal gas law is written in an empirical form:

PV = nRT -> V = nRT/P -> V = (nR/P) x T

Pressure is constant, so it is only dependent on moles.

since compound 2 has a greater mass, it will also have a smaller number of moles, which means the slope will be smaller and located below the compound.

Read more about pressure:

https://brainly.com/question/28012687

#SPJ4

P=17.4 KPa is the pressure exerted on the wall.

A t = 1.00s

A = 8x10" m²,

N = 5x10^23 molecules

ΔV = 300 m/s

P=?

As, Momentum for I molecule is 2 MΔV

N molecules is 2N MΔV

Force exerted on the wall = Momentum/Δt

Also, So, Pressure exented on the wall

P= F /A = 2NMΔV/AΔt=2×5×10^23×4.65×10^-26×300/8×10^-4×1

P=17.4 KPa

What do pressure units mean?

The standard unit of pressure is a pascal (Pa). Given that a pascal is a very small unit of pressure, the kilopascal is the most appropriate measurement for commonplace gas pressures (kPa). 1000 pascals make up one kilopascal. The atmosphere is another frequently used measurement of pressure (atm).

Learn more about Pressure:

brainly.com/question/28012687

#SPJ4

The equilibrium mole fractions {xi} and {yi} of the liquid and vapor phases can be determined using the Raoult's law and the ideal gas law.

Raoult's law states that the vapor pressure of a component in a liquid mixture is equal to the product of its mole fraction and its pure component vapor pressure. P = xi * Pi .The ideal gas law relates the pressure, temperature, and molar amount of a gas. PV = nRT . To determine the equilibrium mole fractions {xi} and {yi} of the liquid and vapor phases, we would need more information about the conditions T and P, such as the pressure, temperature and the vapor pressures of each component at the given temperature. Also the vapor pressures of each component at the given temperature are needed. It's also important to note that the vapor pressures of each component at the given temperature are needed. With the vapor pressures and the mole fractions, we can use the Raoult's law to find the vapor pressures of each component, and use the ideal gas law to find the mole fractions {yi} in the vapor phase. And then by using the mole fractions in vapor and liquid phases, the mole fractions of the liquid phase {xi} can be calculated.

Learn more about mole fractions  here:

https://brainly.com/question/29367909

#SP4

Answer: 0.889 meters

Explanation:

The mug is filled with warm coffee. As it gently cools, heat is released into the surroundings. The cup, the underneath of the room, and the table this was resting on.

You could use the word "underneath," which is often used to express that something is beneath or covered by another object, in the example of the boxes. You might also say "below," although we generally use that term to refer to objects that belong in the same category.

Because of this, when somebody asks you whether you're wearing anything below your shirt, they're likely referring to the clothing you're wearing on the inside rather than the bottom half, as they would if they used the word under t shirt you wearing.

To know more about underneath visit:

https://brainly.com/question/29138047

#SPJ4

The carbohydrate molecule would have more atoms than the glucose molecule.

We need to know what is a monomer and what is a polymer. It is important to note that the polymer is made from the agglomeration of the small units of the compound that combine together.

We ought to know that glucose is a monomer and that carbohydrate is the polymer. The monomer is composed of a few atoms but there are many more atoms in the polymer as the atoms join together. This is because the carbohydrate is made up of many atoms much more than glucose.

Learn more about polymer:https://brainly.com/question/17354715

#SPJ1