During a combustion reaction, 9.00 grams of oxygen reacted with 3.00 grams of CH4.
What is the amount of the leftover reactant?
0.74 grams of methane
0.89 grams of methane
1.22 grams of oxygen
1.45 grams of oxygen
Answer:
0.74
Explanation:
this is the correct answer. I followed a correct answer that had the same probelm with different values, swithxed it with mine, and got 0.75. So its basically 0.74
A certain element has a half-life of three years.
If you currently have a 10g sample of that element and you know that it has undergone five half-life decays, how many grams of the element were in the sample originally?
A
150g
B
160g
C
320g
D
50g
(C) 320 g
Explanation:
A = A02^(-t/hl)
where hl = half-life
A0 = original amount
A = present amount
t = elapsed time = 5 half-lives
10g = A02^(-5) = A0/32
A0 = 32×(10 g) = 320 g
When 0.875 g. of magnesium was heated in air, 1.25 g. of magnesium oxide
(MgO) was produced. How much oxygen must be added?
Answer:
1. What is the coefficient for calcium in the balanced equation?
2 Ca + 5 NaOH → 4 Na + 2 Ca(OH)2
2. The burning of 20.0 g of acetylene (C2H2) produces what mass of carbon dioxide? You must
write the equation, balance it and solve the mass-mass problem.
a. Balanced equation:
2 C2H2 + 5 O2 4 CO2 + 2 H2O
Explanation:
Write the formula for the following compound
sodium chloride
Answer:
NaCl
Explanation:
Na is the symbol of sodium. Cl is the symbol of chlorine
How could the amount of ice cover at the poles be indirectly affected by an increase in evaporation near the equator? Explain.
Answer:
The factors that determine the extent of the ice cover at the poles are the temperature, the winds and the ocean currents. The Artic Ocean sea ice cover is observed to change more in response to a changes in temperature while the Antarctic sea ice cover change more with changes in the wind and ocean currents
Increased evaporation at the equator will come about as a result of rising temperatures combined with the high temperatures of the summer can result in a reduction in the amount of ice cover in the North pole oceans, while the high evaporation rate can lead to higher ocean water circulation rate between North and South poles and the equator such that the ice cover in Antarctica
Therefore, an increase in evaporation near the equator will decrease the ice cover at the poles
Explanation:
help me please this is chemistry
Calculate the number of moles of oxygen (O2) in 24.0 g of O2?
Number of moles = mass/ molar mass
it implies that n(O2) = 24.0g / 32
= 0.75 mols
If an amine functional group is added to an organic compound, the name of the compound will begin with
Answer for a apple it would be happle
xplanation:
Natalia dipped two feathers in oil. Then she dipped one feather in cold water and the other feather in hot water. She swirled both feathers around for 20 seconds, then removed them. Her results are in the table. Cold Water Hot Water Before Oil After Oil After Water Before Oil After Oil After Water Mass 1.2 g 4.5 g 4.2 g 1.2 g 4.4 g 3.5 g She also took a picture of each feather after swirling it in water. two feathers, each with oil and beads of water Was either the cold water or the hot water able to remove the oil? Explain your reasoning.
Answer:
The hot water was better for removing the oil.
Explanation:
You can see that because the mass went down more with the hot water. So, that means that more oil was taken out of the feather with hot water.
Answer:
The mass changed from 1.1grams to 4.5 grams. The appearance is another thing that changed when it got dipped in oil. The feather look like it lost some feathers or the feathers became transparent. The feather just looks soggy and heavier overall. I believe that if Natalia dips the feather covered in oil in cold water, the feather will remain the same. If she were to dip it in hot water, the feather will get rid of the oil mostly. Think about it, in the ocean the water is cold right? So when oil spills in the ocean it will stay there. Hot water is the best to remove the oil from the feather.
Explanation:
Hopefully this will help.
Balance the following equations.
Answer:
A) Mg + H2SO4 → MgSO4 + H2
B) CaCO3 + 2HCl → CaCl2 + H2O + CO2
C) CaO + H2O → Ca(OH)2
D) 3Ag + 4HNO3 → 3AgNO3 + H2O + NO2
Explanation:
A) Mg + H2SO4 → MgSO4 + H2
The equation is already balanced because the number of each element in the left hand side is already equal to that in the right hand side.
B) CaCO3 + 2HCl → CaCl2 + H2O + CO2
This equation is balanced by putting 2 in front of HCl on the left hand side to balance the elements on the right hand side.
C) CaO + H2O → Ca(OH)2
Thus equation is already balanced because the number of each element in the left hand side is already equal to that in the right hand side.
D) 3Ag + 4HNO3 → 3AgNO3 + H2O + NO2
This equation is balanced by putting 3 in front of Ag and 4 in front of HNO3 on the left hand side while we put 3 in front of AgNO3 on the right side to balance the elements on the right hand side.
Why do the two electrons spend their time equally between both hydrogen atoms? In other words, why can’t one hydrogen just take the other’s electron?
2 H2(g) + O2 (g) --> 2 H20 (1)
How many moles of hydrogen gas do you need to make 2 moles of liquid water?
Answer:
4moles of hydrogen atoms
Explanation:
The second conversion factor reflects the number of atoms contained within each molecule. Two water molecules contain 4 hydrogen atoms and 2 oxygen atoms. A mole of water molecules contains 2 moles of hydrogen atoms and 1 mole of oxygen atoms.
The equation below represents the equilibrium state of aqueous phosphoric acid.
H3PO4(aq) ↔ H+(aq) + H2PO4-(aq)
Which of the following is equal to the ionization constant Ka?
A
[H2PO−4][H+][H3PO4]
B
[H+][H3PO4][H2PO4]
C
[H+][H2PO−4][H3PO4]
D
[H3PO4][H+][H2PO−4]
Answer:
.
Explanation:
[tex]K_a=\frac{[H_2PO_4^-][H^+]}{[H_3PO_4]}[/tex]
K, the equilibrium constant, is equal to products over reactants raised to their coefficients (excluding solids and liquids and only including aqueous and gasses)
[tex]Ka=\frac{[H_2PO_4^- ][H^+]}{H_3PO_4}[/tex] is the equilibrium constant and is equal to products over reactants raised to their coefficients (excluding solids and liquids and only including aqueous and gasses). Hence, option A is correct.
What is equilibrium?A state of balance between opposing forces or actions.
A number that expresses the relationship between the amounts of products and reactants present at equilibrium in a reversible chemical reaction at a given temperature.
[tex]Ka=\frac{[H_2PO_4^- ][H^+]}{H_3PO_4}[/tex]
K, the equilibrium constant, is equal to products over reactants raised to their coefficients (excluding solids and liquids and only including aqueous and gasses)
Hence, option A is correct.
Learn more about the equilibrium here:
https://brainly.com/question/19671384
#SPJ2
M
Mass can be measured in local units like dharni pau eto. Discuss the advantages of using
standard units of mass over the local units of mass. (Any two points)
N2 Points)
soup answer
Answer:
1.They are reliable.
2.They dont vary from person to person
Type the correct answer in each box.
Answer:
1 . 26
2. 55.854
Explanation:
because atomic number is the number of proton in other words smaller number and the mass number is the number of neutrons and electrons in other words bigger number .
hope this make sense :)
How many Liters of water do you need to make 8g 10 HSiCl3 +15H,0—1 HS11001+30 HCI
A.9.81 L of water
B..015 L of water
C.2.45 L of water
D.6.51 L of water
Answer:
A maybe I said maybe hope help
Explanation:
..
Which best describes nuclear fusion? O A nucleus spontaneously splits and absorbs energy O Two nuclei spontaneously combine and absorb energy. O A nucleus collides with a neutron and splits, releasing energy. O Nuclei combine to form a heavier nucleus, releasing energy.
Answer: Nuclei combine to form a heavier nucleus, releasing energy.
Explanation: e.g two deuterium nucleus (Hydrogen-2 isotopes) forms an He nucleus and energy is released.
Nuclear fusion is when nuclei combine to form heavier nuclei, releasing energy.
What is Nuclear Fusion?Nuclear fusion is a reaction in which two or more atomic nuclei are combined to form one or more different atomic nuclei and subatomic particles (neutrons or protons). The difference in mass between the reactants and products is manifested as either the release or absorption of energy.
The release of energy with the fusion of light elements is due to the interplay of two opposing forces: the nuclear force, a manifestation of the strong interaction, which holds protons and neutrons tightly together in the atomic nucleus; and the Coulomb force, which causes positively charged protons in the nucleus to repel each other.
Nuclear fusion is also observed in stars.
To learn more about, fusion:
https://brainly.com/question/16556922
#SPJ5
How many joules of heat are needed to raise the temperature of 62.0 g of ethylene glycol from 13.1 C to 40.5C?
Answer:
Q = 4133.2 J
Explanation:
Hello there!
In this case, since these calorimetry problems are based off the following heat equation involving heat (Q), mass (m), specific heat (C) and temperatures (T):
[tex]Q=mC(T_2-T_1)[/tex]
Thus, we plug in the given variables to obtain:
[tex]Q=62.0 g*2.433 \frac{J}{g\°C}* (40.5\°C-13.1\°C)\\\\Q=4133.2J[/tex]
Regards!
Can magic 8 ball wash with water?
2. what is the factor in an experiment that a scientist wants to observe, which may change in response to
the manipulated variable; also known as a dependent variable
In a sample of oxygen gas at room temperature, the
average kinetic energy
of all the balls stays constant. Which postulate of kinetic molecular theory
best explains how this is possible?
Answer: The Kinetic Molecular Theory of Matter
Explanation: The answer is: B. Collisions between gas particles are elastic; there is no net gain or loss of kinetic energy.
The Kinetic Molecular Theory of Matter
2.14g of sodium sulfide react with excess hydrochloric acid to form sodium chloride and dihydrogen sulfide.
BALANCE IT TO AN EQUATION
Answer:
2.14 Na2S + 1.99 HCl ----> 3.20 NaCl + 0.935 H2S
Explanation:
The Balanced equation is
Na2S + 2HCl = 2NaCl + H2S
As we can see -
78.0452 g/mol of sodium sulfide reacts with 2 mole of HCl.
Mass of one mole of HCl = 36.458 g/mol
So, 78.0452 g/mol of sodium sulfide reacts with 2* 36.458 g/mol of HCL to produce 2* 58.44 g of NaCl and 34.1 g/mol of H2S
Thus,
2.14g of sodium sulfide will react with (2* 36.458/78.0452)* 2.14 of HCl
2.14g of sodium sulfide will react with 1.99 g of HCl
2.14 Na2S + 1.99 HCl ----> (2* 58.44/78.0452) *2.14 NaCl + (34.1/78.0452) * 2.14 H2S
2.14 Na2S + 1.99 HCl ----> 3.20 NaCl + 0.935 H2S
How many moles of SO3 are in 2.4 *10^23 cules?
Answer:
0.4 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
We have
[tex]n = \frac{2.4 {10}^{23} }{6.02 \times {10}^{23} } = \frac{2.4}{6.02} \\ = 0.3986...[/tex]
We have the final answer as
0.4 molesHope this helps you
Magnesium metal reacts with oxygen according to the equation: Mg(s) + O2(g) → 2MgO2(s)
Which of the following would increase the rate of the reaction?
grinding the magnesium metal into a fine powder
packing the magnesium tightly at the bottom of the container
forming the magnesium metal into the shape of a sphere
forming the magnesium metal into single, large cube
Answer:
Grinding the magnesium metal into a fine powder. I took the test and got it right.
What is the specific heat of a substance if 690 J of heat are required to raise the temperature of a 100 g
sample by 15°C? You must show your work
Answer:
hi
Explanation:
what are the effect of water pollition
What is the pOH of a solution that has a pH of 2
Consider an ideal gas contained in a cylinder with the volume 34.4L, temperature 667K and pressure 2atm.What will be pressure of the gas if it is heated at 1000k and the volume becomes 50L.
Given :
An ideal gas contained in a cylinder with the volume 34.4L, temperature 667K and pressure 2 atm.
To Find :
What will be pressure of the gas if it is heated at 1000k and the volume becomes 50L.
Solution :
We know, by ideal gas equation :
[tex]Pv = nRT[/tex]
Now, in the given question only their are two state and also their is no leakage so amount of gas is also constant.
So,
[tex]\dfrac{P_1V_1}{T_1} = \dfrac{P_2V_2}{T_2}\\\\\dfrac{2\times 34.4}{667} = \dfrac{P_2 \times 50}{1000}\\\\P_2 = \dfrac{2\times 34.4 \times 1000}{667 \times 50}\ atm\\\\P_2 = 2.06 \ atm[/tex]
Therefore, the pressure of gas is 2.06 atm.
For Al, its atomic number is 13 and its mass number is 27. How many neutrons does it have?
OA 13
OB. 14
OC 26
OD. 27
O E 40
Answer:
14...................
what is the molerity of 4grams of sodium chloride in 3.800ml solution
a) 0.018 M
b) 0.018 Mol
c) 1.052 M
d) 1.052 Mol
Answer: 0.018 M
Explanation: