When the balloon is kept in the sun, due to Sun's heat, the kinetic energy of gaseous particles inside the balloons also gets increased and the balloon expands. This will increase the pressure on the walls of the balloon. It continues to expand and comes to a stage when the baloon bursts.
How will a ray of light traveling parallel to the principle axis of a concave mirror be reflected back
Answer:
It will be reflected to the principal focus of the concave mirror
Explanation:
This is because all rays parallel and close to the principal axis of a concave mirror get reflected to the principal focus of the mirror.
For a ray to be parallel to the mirror, it must be coming from an infinite distance.
So, using the mirror formula,
1/u + 1/v = 1/f where u = object distance from mirror, v =image distance form mirror and f =focal length of mirror.
Since u = infinite distance = ∞
1/u + 1/v = 1/f
1/∞ + 1/v = 1/f
0 + 1/v = 1/f
1/v = 1/f
v = f
So, the image is at the principal focus.
So, the ray of light parallel to the principal axis of the concave mirror is reflected to the principal focus of the concave mirror.
which vector is the sum of vectors a and b
Answer:
C
Explanation:
Vector A points up
Vector B points right
The combination must be both up and right which is C
PWEESE HELPPPP I'LL GIVE BRAINLIEST, (NO LINKS OR I'LL REPORT)
（︶^︶）
A sound wave is made of a series of compressions and
a.
extensions.
c.
rarefactions.
b.
volumes.
d.
refractions.
Answer:
extensions.
Explanation:
Hope this helps
Answer:
extensions i think because sound waves travel through the air and to our ears so its extended
Explanation:
Select all of the mixtures:
oxygen
gold
trail mix
soup
air
Answer:
trail mix, soup, and gold
hope this helps
have a good day :)
Explanation:
Answer:
1: gold 2: trail mix because its a combo of MnM's nuts rasins and whatever else might be in it lastly soup there can be anything in soup
Explanation:
may i be marked brainliest
A circuit has a resistance of 4.0 Ohms. What voltage will produce a current of 1.4 Amps in the circuit
Answer:
5.6 volts
Explanation:
According to Ohm's Law, V = IR
where V = voltage, I = Current and R = resistance
please answer this time question in do not send a link to an unknown website or you are getting reported.
(1) Use Newton's second law: The force F required to accelerate a mass m with acceleration a satisfies
F = m a
So the force needed to accelerate the lion-stretcher system is
F = (175 kg) (2 m/s²) = 350 N
(2) Average speed is defined as the ratio of distance traveled to the time it takes to travel that distance, so in this case the bus's average speed is
(280 km) / (4 h) = 70 km/h
(3) The vertical lines in the plot split up the distance function into 5-minute chunks. The one with the highest average speed is the one over which the distance changes the most. Roughly, the average speeds over each of the given choices is
• 0 to 5 min : (1500 m - 0 m) / (5 min) = 300 m/min
• 10 to 15 min : (3250 m - 2500 m) / (5 min) = 150 m/min
• 15 to 20 min : (3750 m - 3250 m) / (5 min) = 100 m/min
• 25 to 30 min : (4500 m - 4250 m) / (5 min) = 50 m/min
(4) Velocity is a vector, so it has both magnitude and direction. A car moving at constant velocity would be traveling at the same magnitude and direction. But a car on the circular track is constantly turning and changing direction.
GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 20pts-
Answer:
B
Explanation:
inside of a balloon is gas so it has room to move freely
Why are fats and waxes solid at room temperature?
Answer:
Fats and waxes are solid at room temperature because they are made of saturated fatty acids. In contrast, oils are mostly unsaturated fatty acids. ... In contrast, unsaturated fatty acids have several kinks in their structure and therefore, are liquid at room temperature.
An object is in motion if ___
Answer:
An object is in notion if its position change with time.
Clay bricks are used as building materials in construction. Do some research on specific heat capacities of brick, concrete, stone etc. and advise on what this means for society.
Answer:
It means it is the main building block material for society.
Specific heat is the amount of heat energy that causes a unit increase in temperature by required to be added to the unit mass of the substance. It can be measured by the heat capacity of a particular substance. The unit of specific heat is joule/kg/kelvin.
Material Specific heat capacity Thermal conductivity
Clay 1000 0.60
stone 1000 1.8
brick 800 0.73
concrete 1000 1.13
Advice on what this means for society:
Thermal interaction in between indoor and outdoor environments regulated by wall components.The structural and thermal properties influence the behavior of building and fabricating the bricks, stone and others. Clay Bricks are durable, and natural of stable value. A modern building must comply with numerous ecological and economic demands.Learn more about specific heats:
https://brainly.com/question/21041726
Running water has materials such as dirt, sand, and dead plants and animals in it. When this water ends up in a lake, the materials it was carrying fall to the bottom of the lake and form layers. A layer is thicker when more water enters the lake. For example, thick layers form during times of heavy rain, and thin layers form during times of little rain. Sometimes lakes dry up. The bottoms of dry lakes can change into rock. This rock will still have layers. A geologist studied one of these rocks made from the bottom of a lake. Which rock layer formed during the wettest season? Layer
Answer:
The outside layer is the wettest.
Explanation:
An ideal gas expands isothermally performing 4.30 x 10³ of work in the process. Calculate (a)
the change in internal energy of the gas, and (b) the heat absorbed during this expansion.
Answer:
The solution of the given query is explained below in the explanation portion.
Explanation:
Given value is:
Work,
⇒ [tex]W=4.30\times 10^3 \ J[/tex]
(a)
The change in the internal energy will be:
⇒ [tex]\Delta V=\frac{3}{2}nR(\Delta T)[/tex]
Throughout the isothermal procedure, The temperature will be constant "ΔT = 0".
then,
⇒ [tex]\Delta V = \frac{3}{2}nR(0)[/tex]
⇒ [tex]\Delta V = 0 \ J[/tex]
(b)
As we know,
⇒ [tex]\Delta V = Q-W[/tex]
On substituting the value, we get
⇒ [tex]0=Q-W[/tex]
On adding W both sides, we get
⇒ [tex]W=Q-W+W[/tex]
⇒ [tex]W=Q[/tex]
On substituting the given value of "W", we get
⇒ [tex]Q=4.30\times 10^3 \ J[/tex]
to transmit heat sound or electricity through a medium
Answer:Electrical conduction is the transfer of electrically charged particles through a medium, such as electricity traveling through the power lines in your house. Sound conduction (or acoustic conduction) is the transfer of sound waves through a medium, such as vibrations from loud music passing through a wall.
Explanation: Trust
In a clear cup there are three substances. Their densities are 3, 1, and 2. From top of the cup to the bottom, what would the order of substances be sitting inside the cup?
Answer:
1, 2 and 3
Explanation:
The most dense substance will settle at the bottom of the cup
¿Cuál es la formula para resolver la caída libre?
Caída Libre
h= v0 t+1/2 g t2
vf = v0 + g t
?
Someone please help me figure this out
Answer:
the answer is A
Explanation:
hope this helps you will u plz mark me sa brainliest?
john and kate live in the regions marked on the map. john experiences severe winters, with snowstorms and blizzards. in contrast, kate hardly ever experiences temperatures near or below freezing. which of the following statements explain the climate differences in these locations??
Answer:
A. Kate’s location is at a lower latitude.
C. Kate’s location absorbs sunlight that travels a shorter distance through the atmosphere.
Explanation:
^
Answer:
edmentum :-))
Explanation:
When ___ attacks the surface of a metal, it becomes tarnished.
Answer:corrosion (i believe)
Explanation:
Answer
Mix baking soda and salt with hot water and cover everything with it. The proportions are not crucial, but about 1 tablespoon of salt and 1 tablespoon of baking soda to 3 dl water should do the trick. Lightly tarnished objects should clean up in a few minutes, and you just rinse them of and dry them.
Explanation:
in prokaryotic and eukaryotic cells the amount of water in the cell is kept at a steady state. The organelles
through which water passes into and out of cell is the
A) cell membrane
B) cell wall
C) nuclear
D) ribosome
Answer:
A
Explanation:
It would not be C because prokaryotic cells don't have a nucleus. And if you're looking for a body in the cell that controls the nutrients and water it would be A.
A hiking trail is 150 meters long. A mountain lion can run the entire trail in 30 seconds.
How fast does the mountain lion run?
Answer:
5 meters per second
explanation
sana po makatulong
Choose the correct answer?
Answer:
B
Explanation:
The properties of metals depend mainly on the number and arrangement of neutrons
True
False
Answer:
False
Explanation:
Electrons
Describe the three methods of thermal energy transfer and provide a sketch that depicts each:
Conduction:
Convection:
Radiation:
Answer:
a)the process by which heat or electricity is directly transmitted through the material of a substance when there is a difference of temperature
b)the movement caused within a fluid by the tendency of hotter and therefore less dense material to rise, and colder, denser material to sink under the influence of gravity, which consequently results in transfer of heat
c)radiation is the emission or transmission of energy in the form of waves or particles through space or through a material medium.
14. A light bulb has a resistance of 8 ohms and a maximum current of 10 A How much voltage can
be applied before the bulb will break?
Answer:
80 volts.
Explanation:
From the question,
Applying Ohm's law
V = IR...................... Equation 1
Where V = Voltage, I = maximum current of the bulb, R = Resistance of the bulb.
Given: I = 10 A, R = ohms
Substitute these values into equation 1
V = 10×8
V = 80 volt.
Hence the voltage that can be applied is 80 volt.
A 700 kg car going 12 m/s speeds up to 30.6 m/s in 7 seconds. How much work was done to increase its speed?
Answer:
Approximately [tex]2.8 \times 10^{5} \; \rm J[/tex] (assuming that the car is moving on level ground, and that there is no friction to hinder the motion of the car.)
Explanation:
Formula for the kinetic energy, [tex]\rm KE[/tex], of an object of [tex]m[/tex] travelling at velocity [tex]v[/tex]:
[tex]\displaystyle \text{KE} = \frac{1}{2}\, m \cdot v^{2}[/tex].
Let [tex]v_1[/tex] and [tex]v_2[/tex] denote the velocity of this car before and after the acceleration.
Kinetic energy of this car before the acceleration:
[tex]\begin{aligned}\text{KE}_1 &= \frac{1}{2}\, m \cdot {v_1}^{2} \\ &= \frac{1}{2} \times 700\; \rm kg \times (12\; \rm m \cdot s^{-1})^{2} \\ &\approx 5.0 \times 10^{4}\; \rm J\end{aligned}[/tex].
Kinetic energy of this car after the acceleration:
[tex]\begin{aligned}\text{KE}_2 &= \frac{1}{2}\, m \cdot {v_2}^{2} \\ &= \frac{1}{2} \times 700\; \rm kg \times (30.6\; \rm m \cdot s^{-1})^{2} \\ &\approx 3.3\times 10^{6}\; \rm J\end{aligned}[/tex].
Assume that this car was travelling on level ground. Also assume that there is no friction to hinder the motion of this car. The work of the engine of this car would be equal to the amount of [tex]\rm KE[/tex] that the car has gained:
[tex]\rm KE_2 - KE_1 \approx 2.8\times 10^{5}\; \rm J[/tex].
How would an object’s kinetic energy change if it’s mass decreased by a factor of 3 and it moved 6 times faster?
Answer: Decreases in mass cause decreases in kinetic energy due to the aforementioned positive relationship between the two. Therefore when mass is decreased, an increase in kinetic energy is possible if velocity increases.
Answer:: Decreases in mass cause decreases in kinetic energy due to the aforementioned positive relationship between the two.
What provides evidence that has helped earth scientists determine the age of the earth more precisely?
radioactive dating
atmospheric pressure
helium dating
earth’s distance from the moon
Answer:
the answer is radioactive dating
A bat produces a sound at 17,250Hz and wavelength 0.019m. What is
the speed of the sound?
Explanation:
v = f × /\
v = 17250 × 0.019
v = 327.75ms²
A produces a sound at a frequency of 17,250 Hz and wavelength of 0.079 m then the speed of sound will be equal to 327.75 m/s².
What is Wavelength?The distance between two identical locations (adjacent crests) in successive cycles is known as the wavelength, and it is used to describe waveform signals that are transmitted over wires or into space. Typically, in wireless systems, this length is specified in meters (m), centimeters (cm), or millimeters (mm). The wavelength is more frequently described in nanometers (nm), which are units of 10⁻⁹ m, or angstroms, which are units of 10⁻¹⁰ m, for infrared (IR), visible light (UV), and gamma radiation.
As per the given information in the question,
Frequency, f = 17,250 Hz
The wavelength λ = 0.019 m
Then the speed of the sound (v) will be,
v = f × λ
v = 17250 × 0.019
v = 327.75 m/s²
To know more about Wavelength:
https://brainly.com/question/13533093
#SPJ2
The small piston of a hydraulic lift has an area of 0.20 m2. A car weighing 1200 N sits on a rack mounted on the large piston. The large piston has an area of 0.90 m2. What is the mechanical advantage of the hydraulic lift?
Answer:
4.5
Explanation:
Given the following
Weight of the car = 1200N (Load)
Let us get the effort by using the formula;
F1/A1 = F2/A2
Substitute the given values
1200/0.9 = F2/0.2
Cross multiply
0.9F2 = 1200 * 0.2
0.9F2 = 240
F2 = 240/0.9
F2 = 266.67N
Hence the effort is 266.67N
Mechanical Advntage = Load/Effort
MA = 1200/266.67
MA = 4.5
Hence he mechanical advantage of the hydraulic lift is 4.5
How do you think the poet represents the tiger in his poem (The Tyger)? please no bit ly links
Answer:
“The Tyger” represents the evil and beauty too, “the forest of the night” represents unknown challenges, “the blacksmith” represents the creator and “the fearful symmetry” symbolizes the existence of both good and evil. Imagery: Imagery is used to make the readers perceive things with their five senses.
Explanation: