Answer:
An element's atomic number refers to the number of protons found in the nucleus of each atom of the element.
Answer:
ur mom
Explanation:
ur mom lol
Is the Swedish timber industry more likely a result of good resource availability or a lack of trees elsewhere on Earth?
Answer:
The forest products industry plays a major role in the Swedish economy, and accounts for between nine and 12 percent of Swedish industry's total employment, exports, sales and added value. It includes companies within the pulp and paper industry, as well as the wood-mechanical industry.
5. A grouping of organisms based on shared characteristics is called
A. binomial nomenclature
B. scientific name
C. classification
D. genus
Answer:
peace of vassals
Explanation:
I think i spelled it worng
Which of the following wavelengths has the lowest frequency?
10mm
10nm
10km
10cm
10m
Answer:
10m es su respuesta
Explanation:
espero te sirva
Chlorine and hydrogen gas react to form hydrogen chloride as shown in the following reaction Cl 2 ( g)+H 2 (g)--->2HCl (g) Given a 7.10 g sample of chlorine (MM =71.0 g/mol) , how many grams of hydrogen chloride (MM =36.5 g/mol) is produced, assuming the reaction goes to completion? a. 7.10 g 6.3.65 9 c. 5,68 g d 7.300
Answer:
it should be 7.300 sorry if I am wrong
Answer:
The answer is 115
Explanation:
Teacher walked me through it.
In general, what is the effect of increased temperature on the solubility of a gas?
A. It is uniform
B.The solubility increases.
C. The solubility decreases
D.The saturation increases
E. The effect cannot be determined
Answer:
C. The solubility decreases.
Explanation:
Took the plato test!
To prepare a buffer solution with a pH of 4.1, which acid should be used?
glycine: pka = 2.35
benzoic acid: pka = 4.19
hydrobromous: pKa = 8.7
Answer:
benzoic acid: pka = 4.19
Explanation:
If 6.70 g of zinc is reacted with 27.5 g of silver nitrate, the products will be zinc nitrate and silver metal. What is the theoretical mass of silver that will be produced?
a. Write a balanced equation
b. Interpret the equation by
particles and by moles
c. What is the limiting reactant?
Given:
Molar mass AgNO3 =
Needed:
unknown:
available:
d. What is the theoretical mass of silver that will be produced?
e. If the actual yield of silver was 14.1 g, what is the percent yield of the
reaction?
Explanation:
a. Write a balanced equation
The balanced equation for the reaction is given as;
Zn + AgNO3 → Ag + ZnNO3
b. Interpret the equation by particles and by moles
In this equation, 1mol of Zn reacts with 1 mol of AgNO3 to from 1 mol of Ag and 1 mol of ZnNO3
1 mol = 6.022 * 10^23 particles
c. What is the limiting reactant?
The mol ratio between both reactants is 1 : 1 from the equation.
Converting the masses given to ml;
Number of mol = Mass / Molar mass
Zn;
Number of mol = 6.70 / 65.38 = 0.1025 mol
AgNO3;
Number of mol = 27.5 / 169.87 = 0.1619 mol
The limiting reactant in this reaction is Zn. This is because Zn would get used up before AgNO3 according to the number of moles calculated.
d. What is the theoretical mass of silver that will be produced?
1 mol of Zn produces 1 mol of Ag
0.1025 mol of Zn would also produce 0.1025 mol mol of Ag
Mass = Molar mass * Number of Moles = 107.87 * 0.1025
Mass = 11.05 g
e. If the actual yield of silver was 14.1 g, what is the percent yield of the
reaction?
Percent yield = Actual Yield / Theoretical yield * 100%
Percent yield = 11.05 / 14.1 * 100 = 78.36%
Calculate the wavelength for the transition from n = 4 to n = 2, and state the name given to the spectroscopic series to which this transition belongs?
Answer:
The wavelength for the transition from n = 4 to n = 2 is 486nm and the name name given to the spectroscopic series belongs to The Balmer series.
Explanation
lets calculate -
Rydberg equation- [tex]\frac{1}{\pi } =R(\frac{1}{n_1^2} -\frac{1}{n_2^2})[/tex]
where ,[tex]\pi[/tex] is wavelength , R is Rydberg constant ( [tex]1.097\times10^7[/tex]), [tex]n_1[/tex] and [tex]n_2[/tex]are the quantum numbers of the energy levels. (where [tex]n_1=2 , n_2=4[/tex])
Now putting the given values in the equation,
[tex]\frac{1}{\pi }=1.097\times10^7\times(\frac{1}{2^2} -\frac{1}{4^2} )[/tex][tex]=2056875m^-^1[/tex]
Wavelength [tex]\pi =\frac{1}{2056875}[/tex]
=[tex]4.86\times10^-^7[/tex] = 486nm
Therefore , the wavelength is 486nm and it belongs to The Balmer series.
________ exercise strengthens skeletal muscle, and ________ exercise strengthens skeletal and cardiac muscle.
a.resistance, aerobic
c.
aerobic, resistance
b.
aerobic, aerobic
d.
resistance, resistance
Answer:
... :-!...................nose...........How many electrons and protons does the sodium ion have 11 protons and 11 electrons
Answer:
A sodium ion Na+ contains 10 electrons, 11 protons, and 12 neutrons.
Explanation:
Which of the following is a homogeneous mixture ?A.pizza B.oxygen
C.tea
D .pure water
I think it would be d bc water is everywhere
You heat water and olive oil in two separate pans for a delicious new pasta recipe. The pans are the same temperature, but only the water is boiling! Why?
A
Olive oil has weaker intermolecular forces than water. This makes the intermolecular forces in oil easier to break, and keeps the molecules stuck together in a liquid state.
B
Water has weaker intermolecular forces than olive oil. This makes the intermolecular forces easier to break, allowing the individual water molecules to separate and change to a gas.
C
Water is losing electrons more quickly than olive oil is. The electrons float to the surface of the water, and their movement allows the phase change to happen.
Answer:
I think A is the correct answer
Answer: the answer is B 100%
Question 17 of 20
The reactants of a chemical equation have 1 Satom and 40 atoms. Which
set of atoms must also be found in the equation's products so that the
equation models the law of conservation of mass?
A. 4 S and 40
B. 1 S and 40
C. 1 S and 10
O D. 4 S and 10
Answer:
B) 1S and 40
hope it helps
Answer:
b is ur answer
Explanation:
1S and 4O
Is this equation balanced: AgNO3 + 2 KCl -->AgCl + KNO3 Yes No
Answer:
No
Explanation:
AgNO₃ + KCl --> AgCl + KNO₃
This reaction is a precipitation reaction. AgCl is formed as a white solid due to its low solubility in water.
Calculate the [H+] for
(a) black coffee with a pH of 3.59
What is the formula for Dicarbon trioxide
Answer:
diboron trioxide Formula: B 2 O 3 Molecular weight: 69.620 CAS Registry Number: 1303-86-2
Explanation:
hope that helps you╰(*°▽°*)╯What is the concentration of a 500 mL solution with 25 mol of HF? Write your answer with TWO decimal places and round accordingly.
Answer:
oop I'm thinking hmmmmm
The second law of thermodynamics can be worded in different ways, such as a.) heat can flow spontaneously from a hot object to a cold object, or b.) the total entropy of any system plus that of the environment increases as a result of natural processes. Why are these statements equivalent
Answer:
Explanation:
The principal reason why these statements are equivalent and identical is that there can be a progressional flow of heat from a hot object item to a cold object because of this entropy is increasing and expanding Δg < 0 but stream flow from cold to hot is nonspontaneous as Δg > 0.
e.g [tex]dS = \dfrac{\delta Q}{T}[/tex]
As found in heat engines and refrigerators.
If 43.1 g of O2 and 6.8 g of CO2 are placed in a 13.7 L container at 34 degrees C, what is the mixture of gasses?
answer must be in atm
Answer:
The total pressure of the gas mixture = 2.76 atm
Note: The question is not complete. The complete question is as follow:
If 43.1 g of O2 and 6.8 g of CO2 are placed in a 13.7 L container at 34 degree Celsius , what is the pressure of the mixture of gases?
Explanation:
Mass of O₂ gas = 43.1 g, molar mass of O₂ gas = 32.0 g/mol
Number of moles of O₂ gas = 43.1/32.0 = 1.347 moles
Mass of CO₂ gas = 6.8 g, molar mass of CO₂ gas = 44.0 g
Number of moles of CO₂ gas = 6.8/44 = 0.155 moles
Total number of moles of gas mixture, n = (1.347 + 0.155) = 1.502 moles
Volume of gas mixture, V = 13.7 L
Temperature of gas mixture, T = 34 °C = (273.15 + 34) K = 307.15 K
Pressure of gas mixture = ?
Molar gas constant, R = 0.0821 liter·atm/mol·K.
Using the ideal gas equation: PV =nRT
P = nRT/V
P = (1.502 × 0.0821 × 307.15) / 13.7
P = 2.76 atm
Therefore, the total pressure of the gas mixture = 2.76 atm
anyone help with the percent yield questions?
Answer:
oof this is way to hard sry man
Explanation:
An FCC iron-carbon alloy initially containing 0.20 wt% C is carburized at an elevated temperature and in an atmosphere wherein the surface carbon concentration is maintained at 1.0 wt%. If after 51 h the concentration of carbon is 0.35 wt% at a position 3.9 mm below the surface, determine the temperature at which the treatment was carried out. You will need to use data in the two tables below to solve this problem.
Answer:
Explanation:
[tex]\text{From the information given:}[/tex]
[tex]C_o = 0.20 \ wt\% \\ \\ C_s = 1 \ wt\% \\ \\ t = 51 \ h \\ \\ x = 3.9 \ mm \\ \\ C_x = 0.35 \ wt\%[/tex]
[tex]\text{Using Fick's 2{nd} \ law \ of \ diffusion;} \\ \\ \dfrac{C_x- C_o}{C_s-C_o}= 1 - erf ( \dfrac{x}{2\sqrt{Dt}})[/tex]
[tex]\dfrac{0.35-0.20}{1-0.20}= 1 - erf ( \dfrac{x}{2\sqrt{Dt}})[/tex]
[tex]0.1875 = 1 - erf ( \dfrac{x}{2\sqrt{DT}}) \\ \\ erf ( \dfrac{x}{2\sqrt{DT}}) = 1 - 0.1875 \\ \\ erf ( \dfrac{x}{2\sqrt{DT}}) = 0.8125[/tex]
[tex]\text{To find the value of Z by Obtaining Data from Tabulation of Error Function}[/tex] [tex]\text{Table Values:}[/tex]
Z erf(z)
0.90 → 0.7970
0.95 → 0.8209
? → 0.8225
∴
[tex]\dfrac{z-0.90}{0.95-0.90}= \dfrac{0.8125-0.7970}{0.8209-0.7970}[/tex]
[tex]\dfrac{z-0.90}{0.05}= \dfrac{0.0155}{0.0239}[/tex]
[tex]z = 0.9324[/tex]
[tex]\text{To determine the diffusion coefficient;}[/tex]
[tex]erf (0.9324) = 0.8125 = erf (\dfrac{x}{2\sqrt{Dt}}) \\ \\[/tex]
[tex]\dfrac{x}{2 \sqrt{Dt}}= 0.9324 \\ \\ \dfrac{3.9 \times 10^{-3}}{2 \times \sqrt{D\times 51 \times 3600}} = 0.92324 \\ \\ \sqrt{D} = 4.88 \times 10^{-6} \\ \\ D = \sqrt{4.88 \times 10^{-6}} \\ \\ D = 2.38 \times 10^{-11} \ m^2 /s[/tex]
How Ever Gets This RITE IS REWARDED BRAINLIEST and 25 points get it rite
can you show the options? i'm pretty sure it's "before"
Answer:
the answer is According to fossil records scallops live before dinosaurs
Explanation:
before
Rank the following compounds in order of increasing solubility in water. Items (4 items) (Drag and drop into the appropriate area) No more items Items in order most soluble CaO BaO KCI KI
I have tried CaO> BaO > KCl > KI, this is incorrect.
Answer:
CaO < BaO < KCl <KI
Explanation:
Let us remember that the solubility of an ionic substance in water depends on the magnitude of the lattice energy and the hydration energy. If the hydration energy is equal to or is greater than the lattice energy, the substance dissolves in water.
However, the lattice energy depends on the size of the ions. The smaller the ions in the ionic compound, the higher the lattice energy and the lesser the solubility of the ionic compound.
KI has the least lattice energy and the highest solubility in water while CaO has the highest lattice energy and the least solubility in water.
The mass ratio of H to O in water (H2O) is 1:8. What is the mass
ratio of H to O in hydrogen peroxide (H2O2)?
Answer: 1:16
Explanation:
What is the percent composition of hydrogen in glucose
Answer:
67%Explanation:
Thus the % composition of glucose by mass is carbon 40.0 % oxygen 53.3 % hydrogen 6.7 % in this way, the % composition by mass of any compound can be calculated provided that is formed is known.Consider the following equilibrium
N204(9) - 2NO2(9) Keq = 5.85 x 10-3
Which statement about this system is true?
If the equilibrium concentration of NO2 is 1.78 x 10-2 M, the equilibrium concentration of N2O4 is
The equilibrium concentration of N₂O₄, given that the concentration of NO₂ is 1.78×10⁻² is 5.42×10⁻²
Data obtained from the question N₂O₄ <=> 2NO₂Equilibrium constant (Keq) = 5.85×10⁻³ Equilibrium concentration of NO₂ = 1.78×10⁻²Equilibrium concentration of N₂O₄ =?How to determine the equilibrium concentration of N₂O₄Keq = [Product] / [Reactant]
Keq = [NO₂]² / [N₂O₄]
5.85×10⁻³ = [1.78×10⁻²]² / [N₂O₄]
Cross multiply
5.85×10⁻³ × [N₂O₄] = [1.78×10⁻²]²
Divide both sides by 5.85×10⁻³
[N₂O₄] = [1.78×10⁻²]² / 5.85×10⁻³
[N₂O₄] = 5.42×10⁻²
Learn more about equilibrium constant:
https://brainly.com/question/17960050
#SPJ1
Answer:
First answer is "The equilibrium lies to the left", and the second one is 5.42 x 10^-2 M.
Explanation:
Hope i helped yall :D
__C+_SO2—_CS2 + __CO
Answer:
_c+_so2-_cs2+_co= Toxic
What is thePercent composition of dichlorine heptoxide?
Answer:
The percent composition of dichlorine heptoxide is 38.76% CI and 61.24% O
Answer:
38.76%cl and 61.24%o
Explanation:
the percent composition of dichlorine heptoxide is 38.76%Cl and 61.24%O
A chemistry student is given 4.00 L of a clear aqueous solution at 22°C. He is told an unknown amount of a certain compound X is dissolved in the solution. The student allows the solution to cool to 22 C. The solution remains clear. He then evaporates all of the water under vacuum. A precipitate remains. The student washes, dries and weighs the precipitate. It weighs 0.56 kg.
Required:
Using only the information above, Calculate the solubility of X in water at 22° C. If you said yes, calculate it Be sure your answer has a unit symbol and 2 no .0 it. significant digits.
Answer:
The responses to the given points can be defined as follows:
Explanation:
In point 1:
The answer is "No".
In point 2:
The mass of solute = The mass of precipitate [tex]= 0.56\ kg =0.56\ \times 1000 = 560 \ g[/tex]
Calculating the solubility:
[tex]= \frac{\text{mass of solute in g}}{\text{volume of solution in ml}}\\\\ = \frac{560}{ 4000} \\\\ = 0.14 \ \frac{g}{ml}[/tex]
A separatory funnel contains the two immiscible liquids water and toluene. Use the given densities to determine which layer is on top and which is on the bottom in the binary mixture.
Solvent Density (g/mL)
toluene 0.87
water 0.998
Drag and drop each label into the box to indicate the position of the liquid in the mixture.
Top layer
Bottom layer
Answer:
Top layer TolueneBottom layer WaterExplanation:
When two non-miscible liquids are put together, the one with the higher density will be on the bottom, while the one with the lower density will be on top.
Meaning that in this problem's case toluene would be on the top layer and water in the bottom layer.