Determine the cubic function that is obtained from the parent function y=x³ after the sequence of transformations.a vertical stretch by a factor of 3 ; a reflection across the y -axis; a vertical translation 3/4 unit up; and a horizontal translation 1/2 unit left.

Answers

Answer 1

The cubic function obtained from the parent function y=x³ after the given sequence of transformations is

y=-3(x + 1/2)³ + 3/4.

To determine the cubic function obtained from the parent function y=x³ after the given sequence of transformations, we will apply each transformation step by step:

1. Vertical stretch by a factor of 3:
The parent function y=x³ is stretched vertically by multiplying the y-values by 3. This transformation can be achieved by replacing y with 3y in the equation.
So, the equation becomes y=3x³.

2. Reflection across the y-axis:
The reflection across the y-axis is achieved by replacing x with -x in the equation.
So, the equation becomes y=3(-x)³.
Simplifying, we have y=-3x³.

3. Vertical translation 3/4 unit up:
The vertical translation 3/4 unit up is achieved by adding 3/4 to the y-values in the equation.
So, the equation becomes y=-3x³ + 3/4.

4. Horizontal translation 1/2 unit left:
The horizontal translation 1/2 unit left is achieved by adding 1/2 to the x-values in the equation.
So, the equation becomes y=-3(x + 1/2)³ + 3/4.

To know more about the function, visit:

https://brainly.com/question/29633660

#SPJ11


Related Questions

determine the rejection region. select the correct choice below and fill in the answer​ box(es) within your choice. ​(round to three decimal places as​ needed.) a. t>enter your response here your answer is not correct.b. tenter your response here part 3 determine the proper conclusion. ▼ h0. there is ▼ evidence to indicate μ is ▼ 3.

Answers

The rejection region for a hypothesis test can be found, we need to specify the significance level (α) and the test statistic distribution.

Given that the question mentions "t" and asks us to round to three decimal places, we can infer that we are dealing with a t-test and should use the t-distribution.

The rejection region for a t-test is located in the tails of the t-distribution. The specific critical values depend on the degrees of freedom and the significance level (α).

Since the question does not provide the degrees of freedom or the significance level, we cannot provide a specific answer. However, I can explain the general procedure:

1. Determine the degrees of freedom based on the sample size and test conditions.
2. Determine the critical value(s) for the desired significance level (α) from the t-distribution table or a statistical software.
3. If the calculated test statistic (t) falls within the rejection region (tails of the t-distribution), we reject the null hypothesis (H0). Otherwise, we fail to reject the null hypothesis.

To know more about the Hypothesis Test  visit:

https://brainly.com/question/29727211

#SPJ11

Determine whether each equation is true for all real numbers x . Explain your reasoning.

3 x+15=5(x-3)-2 x

Answers

The equation 3x + 15 = 5(x - 3) - 2x is not true for all real numbers x.

To determine if the equation 3x + 15 = 5(x - 3) - 2x is true for all real numbers x, we need to simplify both sides of the equation and check if they are equal.

First, let's simplify the equation step by step:

Starting with the left side:
3x + 15 = 5(x - 3) - 2x
3x + 15 = 5x - 15 - 2x
3x + 15 = 3x - 15

Next, let's combine like terms on both sides:
3x + 15 = 3x - 15

Now, let's subtract 3x from both sides to isolate the constant terms:
15 = -15

From this simplification, we can see that the equation is not true for all real numbers x. In fact, the equation leads to a contradiction, stating that 15 is equal to -15, which is impossible. NOT TRUE.

Know more about the real numbers

https://brainly.com/question/155227

#SPJ11

What type of study is the sales director conducting - a survey, an observational study, or and experiment?

Answers

Based on the information provided, it is not clear what type of study the sales director is conducting. To determine the type of study, we need more specific details about the methodology and purpose of the study.  A survey involves collecting data by asking individuals a set of predetermined questions.

If the sales director is collecting data by asking participants about their opinions, preferences, or experiences, then it could be a survey.An observational study involves observing and recording data without intervening or manipulating any variables. If the sales director is simply observing and recording the sales behaviors and patterns of the sales team without any intervention.


An experiment involves manipulating variables and studying the effects on the outcome. If the sales director is testing different sales techniques or strategies by manipulating variables and measuring the impact on sales performance, then it could be an experiment.

To know more about information visit:

https://brainly.com/question/33427978

#SPJ11

The sales director is conducting a survey. The sales director is conducting a survey to gather information from customers or other individuals. A survey is a useful research method for collecting data and gaining insights that can inform business decisions.

A survey is a research method that involves gathering information from a sample of individuals through the use of questionnaires, interviews, or online forms. It is commonly used to collect data on people's opinions, attitudes, behaviors, or characteristics.

In this case, the sales director is likely using a survey to gather information about customers, sales strategies, or market trends. Surveys can provide valuable insights that help businesses make informed decisions and improve their sales performance.

For example, the sales director may distribute a survey to customers to gather feedback on their satisfaction with the company's products or services. The survey could include questions about their buying preferences, reasons for choosing the company, or suggestions for improvement. By analyzing the responses, the sales director can identify areas of strength and areas that need improvement, ultimately helping to drive sales growth.

It is important to note that a survey is different from an observational study or an experiment. In an observational study, researchers simply observe and record data without intervening or manipulating variables. On the other hand, an experiment involves intentionally manipulating variables to determine cause-and-effect relationships.

In summary, the sales director is conducting a survey to gather information from customers or other individuals. A survey is a useful research method for collecting data and gaining insights that can inform business decisions.

Learn more about research method from the given link:

https://brainly.com/question/32884410

#SPJ11

A flare is designed to follow the path modeled by the function h(t) = â€"16t2 100t, where t is the time elapsed, in seconds, and h(t) is the height, in feet, of the flare at that time. the function can be used to convert the height in feet to the height in meters. which composite function can be used to determine the height, in meters, of the flare at any given time?

Answers

the composite function that can be used to determine the height, in meters, of the flare at any given time is:
h_meters(t) = 0.3048 * h(t)

To determine the height of the flare in meters at any given time, we can use the composite function. The composite function is obtained by converting the height in feet to meters.


The conversion factor to convert feet to meters is 0.3048. So, we can multiply the height in feet by 0.3048 to get the height in meters.

Therefore, the composite function that can be used to determine the height, in meters, of the flare at any given time is:

h_meters(t) = 0.3048 * h(t)  Where h(t) is the height of the flare in feet, and h_meters(t) is the height of the flare in meters.

Know more about composite function here:

https://brainly.com/question/30660139

#SPJ11

Jason asks each member of his class what type of phone they have. the class consists of 1212 women and 88 men. 55 of the women said they had android based phones and 44 of the men said they had android based phones. what is the probability of randomly picking a student in the class that is a man or that does not own an android based phone?

Answers

The probability of randomly picking a student in the class who is a man or does not own an android based phone is 1289/1300.

To find the probability of randomly picking a student in the class who is a man or does not own an android based phone, we need to calculate the individual probabilities and then add them together.

First, let's find the probability of picking a man. The total number of men in the class is 88, out of a total of 1212 women and 88 men.

Next, let's find the probability of picking a student who does not own an android based phone. The total number of women who don't own android phones is[tex]1212-55 = 1157.[/tex]

Similarly, the total number of men who don't own android phones is [tex]88-44 = 44.[/tex]

So, the total number of students who don't own android phones is [tex]1157+44 = 1201.[/tex]

The probability of picking a student who doesn't own an android phone is [tex]1201/1300.[/tex]

To know more about android  visit :

https://brainly.com/question/32115452

#SPJ11



Let u = (3,2) and v = (9,-3) . What is |u+v| ?

Answers

The magnitude of the vector sum u+v is √145.

To find the magnitude of the vector sum u+v, we first add the corresponding components of the vectors:

(3+9, 2+(-3)) = (12, -1).

Next, we square each component and sum the results:[tex]12^2 + (-1)^2 = 145.[/tex]

Finally, we take the square root of the sum to find the magnitude: √145.

Therefore, |u+v| = √145.

In conclusion, the magnitude of the vector sum u+v is √145.

To know more about vector sum visit:

brainly.com/question/28343179

#SPJ11

let an represent the number of ways she can choose sauces across n days, for n0. find a recurrence relation for an (consider which sauces she could choose on day n)

Answers

The recurrence relation for an, the number of ways she can choose sauces across n days, can be defined as
an = an-1 + an-2 + 2, for n > 1


- On day n, she can choose the same sauce as the previous day (an-1) or the same sauce as two days ago (an-2).
- In addition to these options, she can also choose two different sauces on day n.

-Therefore, the total number of ways she can choose sauces on day n is equal to the sum of the number of ways she can choose sauces on the previous day (an-1), the number of ways she can choose sauces two days ago (an-2), and 2 (for choosing two different sauces on day n).

To learn more about recurrence relation

https://brainly.com/question/4082048

#SPJ11

chewbacca has 20 pieces of cherry gum and 30 pieces of grape gum. some of the pieces are in complete packs, while others are loose. each complete pack has exactly x pieces of gum. if chewbacca loses one pack of cherry gum, then the ratio of the number of pieces of cherry gum he has to the number of pieces of grape gum will be exactly the same as if he instead finds 5 packs of grape gum. find x.

Answers

Let's assume the number of complete packs of cherry gum is c1 and the number of complete packs of grape gum is c2. The number of loose pieces of cherry gum is l1, and the number of loose pieces of grape gum is l2.

According to the given information, we have the following equations:

c1 * x + l1 = 20 (equation 1)

c2 * x + l2 = 30 (equation 2)

If Chewbacca loses one pack of cherry gum, the new ratio of the number of pieces of cherry gum to the number of pieces of grape gum will be the same as if he instead finds 5 packs of grape gum.

This can be represented as:

[(c1 - 1) * x + l1] / (c2 * x + l2 + 5 * x) = (c1 * x + l1) / (c2 * x + l2)

Simplifying the equation, we have:

[(c1 - 1) * x + l1] = (c1 * x + l1) * (c2 * x + l2 + 5 * x) / (c2 * x + l2)

Expanding and simplifying further:

(c1 - 1) * x + l1 = (c1 * x + l1) * (c2 + 6) / c2

Let's now substitute the values for c1, l1, and c2:

From equation 1: c1 * x + l1 = 20

From equation 2: c2 * x + l2 = 30

Substituting these values, we get:

(20 - 1) * x + l1 = (20 * x + l1) * (c2 + 6) / c2

Simplifying:

19x + l1 = (20x + l1) * (c2 + 6) / c2

Since we are looking for the value of x, we need another equation to solve for it. Unfortunately, we do not have enough information or constraints in the given problem to determine the exact value of x. Additional information or equations are required to solve for x.

To know more about equation visit:

https://brainly.com/question/29657983

#SPJ11

A utility pole is 35 ft tall. The pole creates a 50 ft shadow. What is the angle of elevation of the sun

Answers

The angle of elevation of the sun can be found using trigonometry. To do this, we need to find the tangent of the angle. The angle of elevation of the sun is approximately 58.21 degrees.


To find the angle of elevation of the sun, we can use the tangent function. The tangent of an angle is defined as the ratio of the opposite side to the adjacent side. In this case, the opposite side is the height of the utility pole, which is given as 35 ft, and the adjacent side is the length of the shadow created by the pole, which is given as 50 ft.

So, we can set up the equation: tan(angle) = opposite/adjacent, which gives us tan(angle) = 35/50. To find the value of the angle, we can take the inverse tangent of both sides: angle = arctan(35/50). Evaluating this expression gives us approximately 0.6435 radians.

To convert this into degrees, we can multiply the radians value by 180/π (180 divided by π) since there are π radians in 180 degrees. Multiplying 0.6435 radians by 180/π gives us approximately 36.87 degrees. Therefore, the angle of elevation of the sun is approximately 36.87 degrees.

To know more about angle of elevation visit:

https://brainly.com/question/29008290

#SPJ11

Exercice a la maison on considere le solide suivant : (les longueur's sont en cm) a) indiquer le nom et la nature de ses bases. colorier-les. b) quelle est sa hauteur ? c) calculer son aire laterale en justifiant. d) tracer son patron. (faire un schema avant pour se reperer !) 4.5

Answers

It is impossible to provide a precise response to each question in the exercise without further knowledge regarding the shape and dimensions of the solid in issue.

The solid in issue is not described in the query, therefore it lacks the details required to provide a precise response. Nonetheless, I can provide a general response to each exercise section as follows:

a) You must be aware of a solid's shape in order to identify the name and nature of its constituents. It is not possible to determine these details based on the provided description. A solid can have many different types of bases, including square, rectangular, round, triangular, etc. Once the solid's shape has been established, it will be easy to identify the name and make sense of its constituent parts.

b) Without knowing the solid's shape and specific dimensions, it is impossible to calculate the height of the solid.

c) The lateral air of a solid is often calculated by adding the lateral air of the solid's faces. Once more, it is impossible to calculate a solid's lateral air without knowing its specific form.

d) Knowing the specific shape of the solid is necessary in order to determine its parent. Le patron is a two-dimensional representation of a solid that has been laid out on a plane with its faces taking the form of planes.

In conclusion, it is impossible to provide accurate answers to the various parts of the exercise without further knowledge regarding the shape and dimensions of the solid in issue.

Learn more about dimensions

https://brainly.com/question/26740257

#SPJ11



Determine whether each matrix has an inverse. If an inverse matrix exists, find it.

[2 3 2 4]

Answers

The inverse of the matrix [2 3; 2 4] is [2 -3/2; -1 1]. If the determinant is non-zero, then the matrix has an inverse. If the determinant is zero, the matrix does not have an inverse.

To determine if a matrix has an inverse, we need to calculate its determinant. Let's find the determinant of the matrix [2 3; 2 4]:
The determinant is calculated as:

(2*4) - (3*2) = 8 - 6

                  = 2
Since the determinant is non-zero (2 is not equal to 0), the matrix [2 3; 2 4] does have an inverse.

To find the inverse, we can use the formula:
Inverse Matrix = (1/determinant) * adjoint matrix

The adjoint matrix is obtained by swapping the diagonal elements and changing the sign of the off-diagonal elements. In this case, the adjoint matrix is [4 -3; -2 2].

Now, we can calculate the inverse matrix:
Inverse Matrix = (1/2) * [4 -3; -2 2]
                        = [2 -3/2; -1 1]

To know more about the matrix, visit:

https://brainly.com/question/29995229

#SPJ11

A triangular face of the roof of the garage has two sides that are feet in length each and a base of length feet. Is the roof a right triangle

Answers

The roof of the garage is a right triangle if it satisfies the Pythagorean theorem.

The Pythagorean theorem states that the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides. In this case, we have two sides that are "feet" in length each and a base of length "feet".

To determine if it is a right triangle, we need to check if the Pythagorean theorem holds true.

Let's denote the two sides as A and B, and the base as C. According to the Pythagorean theorem, A^2 + B^2 = C^2.

In this case, we have A = B = "feet", and C = "feet". Plugging these values into the equation, we get (feet)^2 + (feet)^2 = (feet)^2.

Simplifying this equation, we have 2*(feet)^2 = (feet)^2.

Since the equation does not hold true, it means that the roof of the garage is not a right triangle.
Therefore, the roof of the garage is not a right triangle.

Learn more about the Pythagorean theorem:

https://brainly.com/question/343682

#SPJ11

Drag each tile to the correct box. arrange the expressions in increasing order of their values.

Answers

the correct order from least to greatest is:

(1-x²)/(1-2x) < (3x²+1)/2(x-1) < (x²-1)/(1-2x) < (2x²-x)/2

When x = -2, let's evaluate each expression to determine their values:

Expression 1: (1 - x²) / (1 - 2x)

Substituting x = -2:

(1 - (-2)²) / (1 - 2(-2))

= (1 - 4) / (1 + 4)

= -3/5

Expression 2: (x² - 1) / (1 - 2x)

Substituting x = -2:

((-2)² - 1) / (1 - 2(-2))

= (4 - 1) / (1 + 4)

= 3/5

Expression 3: (2x² - x) / 2

Substituting x = -2:

(2(-2)² - (-2)) / 2

= (2(4) + 2) / 2

= 8/2

= 4

Expression 4: (3x² + 1) / (2(x - 1))

Substituting x = -2:

(3(-2)² + 1) / (2((-2) - 1))

= (3(4) + 1) / (2(-3))

= (12 + 1) / (-6)

= 13 / -6

= -13/6

Now, let's arrange the expressions in increasing order of their values:

-3/5 < -13/6 < 3/5 < 4

Therefore, the correct order from least to greatest is:

(1-x²)/(1-2x) < (3x²+1)/2(x-1) < (x²-1)/(1-2x) < (2x²-x)/2

Learn more about Expression here

https://brainly.com/question/14083225

#SPJ4

Complete question is below

Drag each tile to the correct box. arrange the expressions in increasing order of their values when x= -2

(1-x²)/(1-2x), (x²-1)/(1-2x), (2x²-x)/2, (3x²+1)/2(x-1)



In the expansion of (2m - 3n)⁹ , one of the terms contains m³ .


a. What is the exponent of n in this term?

Answers

To find the exponent of n in the term that contains m³ in the expansion of (2m - 3n)⁹, we need to use the binomial theorem. The exponent of n in the term that contains m³ in the expansion of (2m - 3n)⁹ is 6.

The binomial theorem states that for a binomial expression (a + b)ⁿ, the coefficient of the term containing a^m * b^n is given by the formula:
C(n, m) * a^m * b^(n-m),
where C(n, m) represents the binomial coefficient and is calculated as:
C(n, m) = n! / (m! * (n-m)!).

In this case, the binomial expression is (2m - 3n)⁹ and we are looking for the term that contains m³.

We can find the exponent of n in this term by subtracting the exponent of m from the overall exponent of 9.

Since the term contains m³, the exponent of m in this term is 3.
Therefore, the exponent of n in this term is 9 - 3 = 6.

So, the exponent of n in the term that contains m³ in the expansion of (2m - 3n)⁹ is 6.

For more information on binomial theorem visit:

brainly.com/question/30095070

#SPJ11



Find the indicated measure. Round to the nearest tenth.

Find the diameter of a circle with an area of 74 square millimeters.

Answers

The diameter of a circle with an area of 74 square millimeters is approximately 9.7 millimeters..

To find the diameter of a circle with a given area, we can use the formula:

Area = π * (radius)^2

Given that the area of the circle is 74 square millimeters, we can solve for the radius:

74 = π * (radius)^2

Dividing both sides of the equation by π, we get:

74 / π = (radius)^2

Taking the square root of both sides, we have:

√(74 / π) = radius

Now, to find the diameter, we can multiply the radius by 2:

Diameter = 2 * radius

Substituting the value of the radius we found into the equation, we can calculate the diameter:

Diameter = 2 * √(74 / π)

Using a calculator and rounding to the nearest tenth, the diameter of the circle is approximately 9.7 millimeters.

To know more about diameter , visit

https://brainly.com/question/32968193

#SPJ11

The table shown below gives the approximate 201420142014 earnings for various athletes. Approximately how many times as large were Ronald Christian's 201420142014 earnings as Forest Thorton's

Answers

Ronald Christian's 2014 earnings were approximately 3,066.67 can be written as 3 × 10³ times as large as Forest Thorton's earnings.

To determine approximately how many times as large Ronald Christian's 2014 earnings were compared to Forest Thorton's earnings, we can divide Ronald Christian's earnings by Forest Thorton's earnings.

Ronald Christian's 2014 earnings: $92,000,000

Forest Thorton's 2014 earnings: $30,000

Approximately how many times as large were Ronald Christian's 2014 earnings as Forest Thorton's earnings:

$92,000,000 / $30,000 ≈ 3,066.67

3066.67 = 3 × 10³

Therefore, Ronald Christian's 2014 earnings were approximately 3,066.67 times as large as Forest Thorton's earnings.

To know more about earnings click here :

https://brainly.com/question/32995428

#SPJ4

The question is incomplete the complete question is :

logan made a profit of $350 as a mobile groomer. he charged $55 per appointment and received $35 in tips, but also had to pay a rental fee for the truck of $10 per appointment. write an equation to represent this situation and solve the equation to determine how many appointments logan had. (5 points)

Answers

Logan had approximately 4 appointments.

Let's denote the number of appointments Logan had as 'x'.

The equation representing Logan's profit can be expressed as follows:

Profit = Revenue - Expenses

and, Revenue = Total amount earned from appointments + Tips

Expenses = Rental fee per appointment

Given that

Logan charged $55 per appointment and received $35 in tips.

So, the revenue from each appointment would be $55 + $35 = $90.

As, the expenses per appointment would be the rental fee of $10.

Therefore, the equation becomes:

Profit = (Revenue per appointment - Expenses per appointment) * Number of appointments

350 = (90 - 10) *x

350 = 80x

x = 350 / 80

x ≈ 4.375

Therefore, Logan had approximately 4 appointments.

Learn more about Equation here:

https://brainly.com/question/28390590

#SPJ4



Write and solve a problem that can be modeled by a rational equation.

Answers

The problem can be modeled by the rational equation (2/12) + (3/12) = 1/t, and the solution is t = 12/5 hours (or 2.4 hours).

Problem:

A water tank can be filled by two pipes, Pipe A and Pipe B. Pipe A can fill the tank in 6 hours, while Pipe B can fill the same tank in 4 hours. If both pipes are opened simultaneously, how long will it take to fill the tank?

Solution:

Let's assume that the time it takes to fill the tank when both pipes are opened simultaneously is represented by the variable "t" (in hours).

To solve this problem, we can create a rational equation based on the idea that the combined rate of filling the tank by Pipe A and Pipe B should be equal to the tank's capacity, which is considered as 1.

The rate at which Pipe A fills the tank is 1/6 (as it takes 6 hours to fill the entire tank), and the rate at which Pipe B fills the tank is 1/4 (as it takes 4 hours to fill the entire tank).

When both pipes are opened simultaneously, their rates are additive. Therefore, we can set up the equation:

1/6 + 1/4 = 1/t

Now, let's find a common denominator and solve for "t":

(2/12) + (3/12) = 1/t

(5/12) = 1/t

To solve for "t," we can take the reciprocal of both sides of the equation:

12/5 = t

Therefore, it would take approximately 12/5 hours (or 2.4 hours) to fill the tank when both Pipe A and Pipe B are opened simultaneously.

for such more question on rational equation

https://brainly.com/question/19079438

#SPJ8

Marina tries to compare -2/3 and -5/8 absolute values. she finds their decimal equivalents to be -0.666666... and -0.625 and she knows |-0.6666>|-0.625|. explain why must reverse the inequality in her final answer, -2/3<-5/8

Answers

Marina should have reversed the inequality in her final answer, reflecting the correct relationship between the magnitudes or absolute values of -2/3 and -5/8.

When comparing the absolute values of two numbers, the comparison is based on their magnitude or distance from zero, regardless of their sign.

In this case, Marina compared the decimal equivalents of -2/3 and -5/8, which are -0.666666... and -0.625, respectively. By calculating the decimal values, Marina attempted to compare the magnitudes of the numbers.

Marina correctly observed that |-0.666666...| = 0.666666... and |-0.625| = 0.625. However, she made an error in comparing the values by stating |-0.666666...| > |-0.625|.

To understand why the inequality needs to be reversed in her final answer (-2/3 < -5/8), let's examine the decimal values more closely.

When we write -0.666666... as a fraction, we have -2/3, and when we write -0.625 as a fraction, we have -5/8.

Now, when comparing fractions, a larger magnitude corresponds to a smaller value. In other words, the fraction with the smaller numerator or the larger denominator has a smaller value.

In this case, we can observe that -2/3 has a smaller numerator compared to -5/8, indicating a larger magnitude. Thus, -2/3 is actually greater than -5/8 in terms of their magnitudes or absolute values.

To correctly represent this comparison, the inequality should be reversed, resulting in the correct statement: -2/3 > -5/8.

Therefore, Marina should have reversed the inequality in her final answer, reflecting the correct relationship between the magnitudes or absolute values of -2/3 and -5/8.

for such more question on inequality

https://brainly.com/question/17448505

#SPJ8

She earns $12 per hour working at a store. she earns $30 per lawn mowed working for a landscaper. her goal is to earn $1,800 to pay her monthly expenses.

Answers

To determine the number of hours she needs to work at the store and the number of lawns she needs to mow to reach her goal of earning $1,800, let's set up an equation.

Let:

x = the number of hours she works at the store

y = the number of lawns she mows

The amount she earns from working at the store is $12 per hour, so the total earnings from working at the store can be expressed as 12x.

Similarly, the amount she earns from mowing lawns is $30 per lawn, so the total earnings from mowing lawns can be expressed as 30y.

To reach her goal of earning $1,800, we can set up the equation:

12x + 30y = 1800

We now have an equation with two variables. To find the specific values of x and y, we would need additional information or constraints. Without additional information, there are infinite combinations of x and y that can satisfy the equation.

For example, she could work 100 hours at the store (x = 100) and mow 20 lawns (y = 20), or she could work 50 hours at the store (x = 50) and mow 40 lawns (y = 40). Both scenarios would result in a total earnings of $1,800.

To determine a specific combination of x and y, we would need additional constraints or information such as the number of hours she is available to work or the number of lawns she can mow in a given time period.

To know more about mowing lawns visit:

https://brainly.com/question/32040663

#SPJ11

Jenna is trying to break her school's record for doing the most push-ups in ten minutes. The current record holder did 350 push-ups in ten minutes. The table shows the number of push-ups Jenna completed in the first 6 minutes,


b. Will Jenna beat the current record? Justify your reasoning

Answers

Jenna will not break the school record since she needs 201 push-ups and can only complete 100 push-ups in the remaining time. Therefore, Jenna will not break the school's record based on the data given in the table.

Jenna's push-up rate is critical in determining whether she will surpass the existing record of 350 push-ups in ten minutes. Jenna completed 150 push-ups in the first 6 minutes, according to the chart. This suggests that Jenna can complete

150/6=25 push-ups per minute.

Jenna has four minutes left in her effort to break the school record since the competition lasts ten minutes.The push-up rate required to break the current record of 350 push-ups in ten minutes can be calculated. Jenna must perform a total of 351 push-ups in ten minutes to surpass the existing record. Jenna must, therefore, perform 351 - 150 = 201 push-ups in the next four minutes to break the school record. Jenna can perform 4 x 25 = 100 push-ups in the next four minutes at her current rate. As a result, Jenna will not break the school record since she needs 201 push-ups and can only complete 100 push-ups in the remaining time. Therefore, Jenna will not break the school's record based on the data given in the table.

To know more about competition visit:

brainly.com/question/2570802

#SPJ11

What is the t-critical value when completing a 95% confidence t-interval with a sample size of 9

Answers

The t-critical value when completing a 95% confidence t-interval with a sample size of 9 is 2.306.

The t-critical value when completing a 95% confidence t-interval with a sample size of 9 can be calculated using a t-distribution table.

The table contains the t-scores and corresponding probabilities for various degrees of freedom and levels of significance.

In this case, the sample size is n = 9, and we want to find the t-critical value for a 95% confidence interval. The degrees of freedom (df) for a sample of size n = 9 is df = n - 1 = 9 - 1 = 8.

To find the t-critical value, we look at the row for df = 8 and column for a 95% confidence level in the t-distribution table.

From the table, the t-critical value is approximately 2.306.

Therefore, the t-critical value when completing a 95% confidence t-interval with a sample size of 9 is 2.306.

We know that the confidence level is 95%, therefore,\[\alpha = 1 - 0.95 = 0.05\]

So,\[t_{\frac{\alpha}{2}} = t_{\frac{0.05}{2}} = t_{0.025}\]

We are given that the sample size is 9.

Therefore, degrees of freedom (df) will be,\[df = n - 1 = 9 - 1 = 8\]

Using the t-distribution table, the t-critical value for a 95% confidence level and df = 8 is 2.306.

Therefore, the t-critical value when completing a 95% confidence t-interval with a sample size of 9 is 2.306.

Learn more about: t-critical

https://brainly.com/question/30783931

#SPJ11



Solve the following equation.

p-21=52

Answers

The solution to the equation p - 21 = 52 is p = 73.

To solve for p, we want to isolate the variable on one side of the equation.

We can do this by performing the same operation on both sides of the equation.

In this case, we add 21 to both sides, resulting in p - 21 + 21 = 52 + 21.

Simplifying further, we have p = 73.

Therefore, the solution to the equation is p = 73.

This means that when p is substituted with 73 in the equation, it satisfies the given equation and makes it true. Solving linear equations involves manipulating the equation using arithmetic operations to isolate the variable.

To learn more about solving linear equations, refer here:

https://brainly.com/question/30403771#

#SPJ11



If the speed of an airplane is 350mi / h with a tail wind of 40mi / h , what is the speed of the plane in still air?

Answers

To find the speed of the plane in still air, we can use the concept of relative velocity. The speed of the plane in still air can be determined by subtracting the velocity of the wind from the total velocity of the plane with the tailwind.

Let's denote the speed of the plane in still air as "v" (in miles per hour). The total velocity of the plane with the tailwind is the sum of the speed of the plane in still air (v) and the velocity of the tailwind (40 mi/h).

So, we have:

Total velocity = Speed of the plane in still air + Velocity of the tailwind.

350 mi/h = v + 40 mi/h.

To find the speed of the plane in still air, we subtract 40 mi/h from both sides of the equation:

350 mi/h - 40 mi/h = v.

Simplifying:

310 mi/h = v.

Therefore, the speed of the plane in still air is 310 miles per hour.

To know more about relative velocity visit:

https://brainly.com/question/29655726

#SPJ11

if a loading ramp is placed next to a truck, at a height of 7 feet, and the ramp is 22 feet long, what angle (in degrees) does the ramp make with the

Answers

The angle the ramp makes with the ground can be found using trigonometry as the inverse tangent of the vertical height divided by the horizontal length.

To find the angle (in degrees) that the ramp makes with the ground, we can use trigonometry. The tangent of an angle is defined as the ratio of the opposite side (vertical height) to the adjacent side (horizontal length). In this case, the opposite side is the height of the ramp (7 feet) and the adjacent side is the length of the ramp (22 feet).

The angle (θ) can be found using the inverse tangent (arctan) function:

θ = arctan(opposite/adjacent) = arctan(7/22)

Using a calculator or trigonometric tables, we can find the arctan(7/22) to get the angle in radians. To convert it to degrees, we can multiply by (180/π):

θ (in degrees) ≈ arctan(7/22) * (180/π)

Calculating this expression will give us the angle (in degrees) that the ramp makes with the ground.

Question: if a loading ramp is placed next to a truck, at a height of 7 feet, and the ramp is 22 feet long, what angle (in degrees) does the ramp make with the loading ramp?

To learn more about “radian” refer to the https://brainly.com/question/19278379

#SPJ11

A work center consisting of 7 machines is operated 16 hours a day for a 5-day week. utilization is 80%, and efficiency is 110%. what is the rated weekly capacity in standard hours

Answers

The given data in the problem is utilized to calculate the weekly rated capacity in standard hours which comes out to be 616.

The given data is as follows:

No. of machines= 7

Operating hours per day= 16

Operating days in a week= 5

Utilization= 80%

Efficiency= 110%

In order to find out the rated weekly capacity, we need to use the below formula:

Rated Weekly Capacity = No. of Machines × Operating hours per day × Operating days per week × Utilization × Efficiency

Now, let's put the values in the above formula.

Rated Weekly Capacity = 7 × 16 × 5 × 80% × 110%

Calculating the above expression, we get,Rated Weekly Capacity = 616

Therefore, the rated weekly capacity is 616 standard hours.

: Rated Weekly Capacity is found out using the formula, Rated Weekly Capacity = No. of Machines × Operating hours per day × Operating days per week × Utilization × Efficiency. The given data in the problem is utilized to calculate the weekly rated capacity in standard hours which comes out to be 616.

To know more about weekly rated capacity visit:

brainly.com/question/32654737

#SPJ11

​chebyshev's theorem states that for any set of​ numbers, the fraction that will lie within k standard deviations of the mean is at least 1 . use this theorem to find the fraction of all the numbers of a data set that must lie within standard deviations from the mean.

Answers

Chebyshev's theorem guarantees that at least 1 fraction of all the numbers in a data set will lie within k standard deviations from the mean, where k is a positive value.

To find the fraction of numbers within k standard deviations from the mean using Chebyshev's theorem, you need to determine the value of k. The fraction can be calculated as 1 - 1/k^2.

For example, if k is 2, then the fraction would be 1 - 1/2^2 = 1 - 1/4 = 3/4.

In the given question, it does not specify the value of k.

Therefore, we cannot calculate the exact fraction.

However, we can conclude that regardless of the value of k, the fraction will be at least 1. This means that all the numbers in the data set will lie within k standard deviations from the mean.

Chebyshev's theorem guarantees that at least 1 fraction of all the numbers in a data set will lie within k standard deviations from the mean, where k is a positive value.

To know more about Chebyshev's theorem visit:

brainly.com/question/30584845

#SPJ11

A Quality Control Inspector examined 210 parts and found 15 of them to be defective. At this rate, how many defective parts will there be in a batch of 14,490 parts

Answers

There will be approximately 1,034 defective parts in a batch of 14,490 parts, based on the rate found by the Quality Control Inspector.

To find the number of defective parts in a batch of 14,490 parts, we can set up a proportion using the rate of defective parts found in the sample.

The proportion can be written as:

15 defective parts / 210 parts = x defective parts / 14,490 parts

To solve for x, we cross multiply and then divide:

15 * 14,490 = 210 * x

217,350 = 210 * x

Dividing both sides by 210:

x = 217,350 / 210

Simplifying the right side:

x ≈ 1,034.29

Therefore, there will be approximately 1,034 defective parts in a batch of 14,490 parts, based on the rate found by the Quality Control Inspector.

To know more about Inspector visit:

https://brainly.com/question/14882529

#SPJ11



Find the value of each trigonometric expression. sin 100° cos 170°+cos 100° sin 170°

Answers

To find the value of the trigonometric expression sin 100° cos 170° + cos 100° sin 170°, we can use the trigonometric identities.Therefore, the value of the trigonometric expression sin 100° cos 170°+cos 100° sin 170° is -1.

Now, let's use the trigonometric identity sin(A + B) = sin A cos B + cos A sin B to simplify the expression. In this case,

A = 100° and B = 170°:

sin 100° cos 170° + cos 100° sin 170°

= sin(100° + 170°)

Since sin(100° + 170°)

is not a standard angle, we need to use the addition formula for sine.

The formula states that sin(A + B) = sin A cos B + cos A sin B.

sin(100° + 170°) = sin(270°)

Now, we know that sin(270°) = -1.

herefore, the value of the given trigonometric expression is -1.

To know more about trigonometric expression  visit:

https://brainly.com/question/11659262

#SPJ11

Lilly has 1/3 of chips she gives maria 1/4 of what she has to maria what fraction does maria get

Answers

Maria gets 1/12 of the chips.

Lilly has 1/3 of chips. She gives Maria 1/4 of what she has to Maria. To find the fraction that Maria gets, we need to multiply the fraction Lilly gives to Maria (1/4) by the fraction of chips Lilly has (1/3).

Multiplying fractions involves multiplying the numerators and multiplying the denominators. So, multiplying 1/4 and 1/3 gives us (1 * 1) / (4 * 3), which simplifies to 1/12.

Therefore, Maria gets 1/12 of the chips.

To learn more about "Fractions":

https://brainly.com/question/30154928

#SPJ11

Other Questions
Two similar pyramids have base areas of 12.2 cm2 and 16 cm2. the surface area of the larger pyramid is 56 cm2. what is the surface area of the smaller pyramid? 40.1 cm2 42.7 cm2 52.2 cm2 59.8 cm2 a triangular prism has an equilateral base with each side of the triangle measuring 8.4 centimeters. the height of the prism is 10.2 centimeters. which triangular prism is similar to the described prism? Exercise 1 Underline the correct word in each sentence.People cant hardly walk when sidewalks are covered with ice. . rewrite the following simple sentences as compound sentences: 1.the old man being poor could not buy that house. 2.in spite of being generous, that woman is not beautiful. 3.she must work hard to finish her work on time. 4.our teacher is popular among students for his diligence. 5.after taking off their clothes, the children jumped into the river. b. rewrite the following simple sentences as complex sentences: 1.on seeing the policeman, the thief fled away. 2.you cannot succeed without working hard. 3.i do not know the way leading to his house. 4.the guests sitting in the room could not hear his voice. 5.she hoped to be successful in the examination. Who discovered the microbial basis of fermentation and showed that providing oxygen does not enable spontaneous generation? When a small particle is suspended in a fluid, bombardment by molecules makes the particle jitter about at random. Robert Brown discovered this motion in 1827 while studying plant fertilization, and the motion has become known as Brownian motion. The particle's average kinetic energy can be taken as 3/2 KBT , the same as that of a molecule in an ideal gas. Consider a spherical particle of density 1.0010 kg/m in water at 20.0C.(b) The particle's actual motion is a random walk, but imagine that it moves with constant velocity equal in magnitude to its rms speed. In what time interval would it move by a distance equal to its own diameter? A team commissioned to design and install an automated part degreaser is which type of team? What do you think would happen if we varied the solvent (for example, if we used water instead)? would the dyes travel the same distances as when we used rubbing alcohol? Which of the following is not true about process layouts when they are compared to product layouts? Multiple Choice lower unit costs more involved cost accounting higher in-process inventories lower span of supervision lower rates of output A bank offers the following choices for certificates of deposit:Year one: 4% nominal interest rate convertible quarterlyYear three:5% nominal interest rate convertible quarterlyYear 5: 5.65% nominal interest rate convertible quarterlyTher certificates mature at the end of the term. the bank does not permit early withdrawals. during the next 6 years the bank will coninue to offer certificates of deposit with the same terms and interest rates. an investor initially deposits 10,000 in the bank and withdraws both principal and interest at the end of 6 years. calculate the max annual effective rate of interest the investor can earn over the 6 year period.A. 5.09%, B. 5.22%, C. 5.35%, D. 5.48%, E. 5.61% A customer sells 1 abc jan 50 call and buys 1 abc feb 50 call. this is a? a calendar debit spread b calendar credit spread c vertical debit spread d vertical credit spread List the measures that are commonly used to protect the confidentiality of information. Refer to the accompanying data display that results from a sample of airport data speeds in mbps. The results in the screen display are based on a 95% confidence level. Write a statement that correctly interprets the confidence interval. a proton has a magnetic field due to its spin on its axis. the field is similar to that created by a circular current loop 0.650 10-15 m in radius with a current of 1.05 104 a. Margo is a new college student. According to research on interpersonal attraction, with whom is Margo most likely to become friends Editing is the process of Question 6 options: a) organizing the topics in a logical order. b) shortening lengthy sentences and paragraphs. c) correcting errors in spelling, punctuation, and grammar. d) adapting the readability level. e) ensuring that the purpose is clear. wagner was appointed conductor of the dresden opera mainly because of the success of his first opera Loyal customers buy a substantial amount from the firm. These loyal customers are the most ______ in the long term to the firm. What is it called when individuals' genes may influence the types of environments to which they are exposed? Gerry's Generator Supply is approached by Mr. Sandman, a new customer, to fulfill a large one-time-only special order for a product similar to one offered to regular customers. Gerry's Generator Supply has excess capacity. The following per unit data apply for sales to regular customers:Direct materials $1,700.00Direct manufacturing labor $100.00Variable manufacturing support $200.00Fixed manufacturing support $150.00Total manufacturing costs $2,150.00Markup (20%) $430.00Estimated selling price $2,580.00Required:Before accepting this one-time-only special order, Gerry's Generators wants to know how much profit would be made on the order:____________A) $2,000B) Loss of $150C) $0D) $430 Which lines represent the approximate directrices of the ellipse? round to the nearest tenth. x = 8.6 and x = 8.6 x = 6.6 and x = 10.6 y = 8.6 and y = 8.6 y = 6.6 and y = 10.6