Raymond was asked to come to the board and solve the equation h = ab + r for a.
What should be Raymond's first step?
Subtract r from both sides of the equation.
Multiply each side of the equation by b.
Divide each side of the equation by a.
Add h to each side of the equation.

To determine the exact sample size, we need to specify the desired margin of error (E).

To determine the required sample size to estimate the mean age of female statistics students, we need to use the formula for sample size calculation:

n = (Z x σ / E)²,

where n is the sample size, Z is the desired confidence level (in terms of standard deviations), σ is the standard deviation of the population, and E is the desired margin of error.

In this case, we want to estimate the mean age of female statistics students, assuming that their ages have a standard deviation of 17.1 years. However, we are given that the sample standard deviation for the calculation is 17.1 years. This implies that we already have an estimate of the standard deviation from a previous sample.

Since we don't have the specific value for the desired margin of error (E), we cannot determine the exact sample size. The margin of error depends on the level of confidence we want for our estimate. A common level of confidence is 95% or 1.96 standard deviations.

If we assume a 95% confidence level (Z = 1.96), we can calculate the sample size as follows:

n = (1.96 x 17.1 / E)².

To determine the exact sample size, we need to specify the desired margin of error (E).

To know more about standard deviation follow

https://brainly.com/question/21602564

#SPJ4

According to the question we have The angle at which the athlete should throw the javelin so that it travels 115 feet is 2.136°.

The range of a projectile fired at an angle with the horizontal and with an initial velocity of v₀ feet per second is given by r = 32v₀² sin(θ) where r is the horizontal distance the projectile travels.

An athlete throws a javelin at 75 feet per second.  

We need to calculate the angle of projection θ from the given data.

For this, we can use the formula of the range of a projectile. r = 32v₀² sin(θ) .

Now, put the values of r and v₀, given as 115 and 75 respectively.

115 = 32(75)² sin(θ)sin(θ) = 115 / (32 × 75²)sin(θ) = 0.03713θ = sin⁻¹ (0.03713)θ = 2.136° .

The angle at which the athlete should throw the javelin so that it travels 115 feet is 2.136°.

To know more about Angle  visit :

https://brainly.com/question/31818999

#SPJ11

To find the correct graph that represents the linear relationship between the number of roses blooming and the number of days that pass, we need to determine the slope-intercept form of the equation of the line.

Let x be the number of days that pass and y be the number of roses blooming. We can use the two given points to find the slope:

slope = (y2 - y1)/(x2 - x1) = (18 - 30)/(6 - 2) = -3

The slope of the line is -3. To find the y-intercept, we can use one of the points and substitute the slope and x-value:

y = mx + b

30 = (-3)(2) + b

b = 36

The y-intercept of the line is 36. Therefore, the equation of the line is:

y = -3x + 36

Now we can look at the given graphs and choose the one that fits the equation. We can see that the correct graph is:

a coordinate plane with the x-axis labeled time in days and the y-axis labeled number of roses blooming, with a line segment that passes through the points 0 comma 36 and 8 comma 12.

This is because the line segment passes through the two points (0, 36) and (8, 12), which corresponds to the y-intercept and another point on the line.

Hello !

FILL IN THE BLANK.

A small dam is using a 4-pole machine to make power. As long as it is rotating slower than a certain number of rpm’s, it is acting as a motor.

.Answer:At t=3, velocity = -70 ft/s and acceleration = 10 ft/s².

Given the distance formula,

s(t) = 80-100t+5t²

The derivative of the distance function with respect to time is the velocity function, s'(t).

a) Velocity, v(t)=s'(t)The derivative of the distance function with respect to time is the velocity function, v(t) or

s'(t).s'(t) = d/dt[80-100t+5t²]s'(t)

= -100 + 10t

b) Acceleration, a(t)=s"(t)

The second derivative of the distance function with respect to time is the acceleration function, a(t) or s"(t).

s"(t) = d²/dt²[80-100t+5t²]

s"(t) = 10

c) Find the velocity and acceleration when t = 3 secondsWhen t = 3 seconds, we have:

v(3) = s'(3)

= -100 + 10t

= -100 + 10(3)

= -70 ft/sa(3)

= s"(3)

= 10 ft/s²

Therefore, the velocity of the object when t = 3 seconds is -70 ft/s and the acceleration of the object when t = 3 seconds is 10 ft/s²

To know more about object visit;

brainly.com/question/31018199

#SPJ11

Answer:

11

Step-by-step explanation:

The median in a given number set is the middle term within the set.  In this case, there are 9 terms in the set, making the 5th term the median:

7 , 8 , 9 , 9 , 11 , 11 , 12 , 15 , 19

11 would therefore be your answer.

~

Note that if the given number set has a even amount of numbers, then you will find the mean between the two middle numbers. For example, if 20 was added to the given number set, making it 10 terms a set:

7 , 8 , 9 , 9 , 11 , 11 , 12 , 15 , 19 , 20

Then you will add the two middle numbers (11 & 11), and divide by 2:

[tex]\frac{(11 + 11)}{2} = \frac{22}{2} = 11[/tex]

~

Learn more about finding the median in a number set, here:

https://brainly.com/question/300591

The correct answer is C. Yes; The business understanding step is the most important because if the problem definition is wrong or misaligned with respect to business outcomes, all subsequent work will be wasted.

The CRISP-DM (Cross-Industry Standard Process for Data Mining) methodology is a widely used framework for conducting data mining projects. It consists of six phases:

Business Understanding

Data Understanding

Data Preparation

Modeling

Evaluation

Deployment

While all phases of the CRISP-DM process are essential and interconnected, the business understanding step holds particular importance. Here's why:

The business understanding phase sets the foundation for the entire project. It involves identifying the business objectives and goals, understanding the project requirements, and defining the problem to be solved. If this initial step is flawed or misaligned with the business outcomes, all subsequent work within the project could be misguided.

Without a clear understanding of the business context and problem, data mining efforts may be focused on the wrong areas, leading to wasted time, resources, and potentially inaccurate or irrelevant results. It is crucial to ensure that the problem definition is accurate, relevant, and aligned with the business objectives. This phase also involves identifying key stakeholders, their requirements, and any constraints or limitations.

By starting with a solid foundation in the business understanding phase, subsequent phases, such as data understanding, data preparation, modeling, evaluation, and deployment, can be executed with a clear understanding of the project's purpose and objectives.

In summary, while all phases of CRISP-DM are vital, the business understanding step is considered the most important as it sets the direction and ensures that subsequent work is aligned with the desired business outcomes.

To know more about CRISP-DM process refer here:

https://brainly.com/question/31872484

#SPJ11

the margin of error for this 95% confidence interval is 4.1%. This means that if we were to repeat the sampling process many times, 95%

The margin of error for a 95% confidence interval can be calculated using the formula:

Margin of error = (Upper limit - Lower limit) / 2

Substituting the given limits, we get:

Margin of error = (70.3% - 62.1%) / 2

Margin of error = 4.1%

Therefore, the margin of error for this 95% confidence interval is 4.1%. This means that if we were to repeat the sampling process many times, 95% of the intervals obtained would contain the true population proportion, within plus or minus 4.1% of the sample proportion.    

To know more about error visit:

https://brainly.com/question/28008941

#SPJ11

Answer:

Step-by-step explanation:

First, let's start with a point. what is a point?

point is a dot represented with a dot and assigned a letter. example = .Q or .F

the option "line" matches the first option, which says it goes in 2 directions forever and is known by two dots.

Ray is really similar to a line but instead of going in "two" directions forever it only goes in one.

A line segment is the part of a line which has an endpoint and starting point.

the plane is basically like a piece of paper where we draw all the lines and points, it is a 2d surface that extends forever and is the place where all lines, angles and points EXISTS .

HOPE U LIKED THE ANSWER :]

Answer:

(-4,-3)=-4-3=-7 (-4,-6)=-10,,(-1-6)=-7(-1-3)=4

A sequence of random numbers must be uniformly distributed. This means that the numbers have an equal chance of occurring and there is no pattern to their occurrence.

Uniform distribution is important in generating random numbers because it ensures that the numbers are not biased towards any particular value or range. However, it is important to note that while the numbers may appear random, they are actually generated using algorithms that follow specific patterns. These algorithms are designed to mimic the randomness found in nature, but they are not truly random. Therefore, the term "pseudo-random" is used to describe them. In summary, a sequence of random numbers must be uniformly distributed, but they are generated using algorithms that follow patterns.

To know more about patterns visit:

https://brainly.com/question/23136125

#SPJ11

The statement that the normal distribution is bimodal is not true. The normal distribution is a unimodal distribution, meaning it has only one mode. It is symmetric around the mean, and the mean, median, and mode are all equal.

Additionally, the normal distribution is asymptotic, meaning that the tails of the distribution approach but never touch the horizontal axis. The normal distribution is a bell-shaped curve that is widely used in statistics and probability theory to describe real-world phenomena such as the heights of people, test scores, and IQ scores. The properties of the normal distribution make it a useful tool for modeling data, making predictions, and conducting hypothesis tests.

By understanding the normal distribution, statisticians and data analysts can better understand the patterns and trends in their data and make informed decisions based on that understanding.

To know more about visit:

https://brainly.com/question/30125628

#SPJ11

Answer:

Huong invests $4,817 in a savings account with a fixed annual interest rate of 3% compounded 2 times per year. This means that the interest is calculated every 6 months and added to the principal amount. The interest rate for each 6-month period is 1.5%.

After 12 years, the account balance will be:

$4,817 * (1 + 0.015)^24 = $6,245.46

The account balance will be $6,245.46 after 12 years.

(a) To obtain a point estimate for the population proportion of patients who received 10-mg doses of a drug daily and reported headache as a side effect, we can use the formula:

Point estimate = number of patients who reported headache / total number of patients

So, in this case, the point estimate would be:

42/150 = 0.28 or 28%

Therefore, we can estimate that 28% of patients who received 10-mg doses of the drug daily reported headache as a side effect.

(b) To verify the requirements for constructing a confidence interval about p, we need to check if the sample size is large enough and if the conditions for using a normal distribution are met.

Firstly, since the sample size (n=150) is greater than 30, we can assume that the sample proportion is normally distributed.

Secondly, we need to check that the conditions for using a normal distribution are met. These are:

- The sample is selected randomly
- The sample is independent
- The sample size is less than 10% of the population size (if applicable)

Assuming that the sample was randomly selected and independent, we do not have information about the population size, but we can assume that it is sufficiently large. Therefore, we can conclude that the requirements for constructing a confidence interval about p are satisfied.

To know more about  proportion visit:

https://brainly.com/question/31548894

#SPJ11

To determine a fair amount to pay for playing the game, we need to calculate the expected value, which represents the average outcome of the game. In this game, there are 16 possible outcomes when flipping four coins, ranging from no heads (HHHH) to four heads (TTTT). We win $1 if we ever flip two heads in a row.

To calculate the expected value, we assign a value of $1 to the favorable outcome (two heads in a row) and $0 to all other outcomes. Since there are three ways to achieve two heads in a row (HHHT, THHH, HTHH), the total value for these outcomes is $3. The remaining 13 outcomes have a value of $0.

The probability of getting two heads in a row is 3/16 because there are three favorable outcomes out of 16 total outcomes. Therefore, the expected value is (3/16) * $1 + (13/16) * $0 = $3/16.

A fair amount to pay for playing this game would be equal to the expected value, which is $3/16. This means that on average, if you play this game multiple times, you would expect to win $3 for every 16 games played.

To learn more about probability : brainly.com/question/32117953

#SPJ11

The median number of faculty in departments in the college of arts and science is 12.

The median is a measure of central tendency that represents the middle value of a dataset when the values are sorted in ascending or descending order. Its purpose is to give a single representative value for the dataset, offering a way to understand the center of the data distribution. Unlike the mean, which can be affected by extreme values, the median is resistant to outliers and gives us a better understanding of what a typical value in the data set might be.

To find the median number of faculty in the College of Arts and Science at Delta University, first, arrange the department faculty numbers in ascending order:

7, 8, 9, 11, 12, 13, 14, 15, 17.

Since there are nine departments, which is an odd number, the median will be the middle value in the sorted list. So the middle number is the fifth number, which is 12

The median number of faculty in departments in the College of Arts and Science at Delta University is 12, as it is the middle value in the sorted list.

Note: The question is incomplete. The complete question probably is: The college of arts and science at delta university has nine departments. The number of faculty in each department is shown below. What is the median number of faculty in departments in the college of arts and science? 8, 12, 9, 15, 17, 11, 13, 14, 7.

Learn more about Median:

https://brainly.com/question/26177250

#SPJ11

The projection of r(t) onto the xz-plane for −1 ≤ x ≤ 1 is given by the equation ( x, cos(t), 0 ).

To find the projection of r(t) onto the xz-plane, we need to remove the y-component from the vector. The xz-plane has a normal vector of (0,1,0), so the projection of r(t) onto the xz-plane can be found using the dot product between r(t) and the normal vector, divided by the magnitude of the normal vector.

Let's start by finding the dot product between r(t) and the normal vector:

r(t) ⋅ (0,1,0) = 0(sin(t)) + 1(cos(t)) + 0(4sin(t)+6cos(2t))

= cos(t)

Next, we need to find the magnitude of the normal vector:

| (0,1,0) | = sqrt(0^2 + 1^2 + 0^2) = 1

Therefore, the projection of r(t) onto the xz-plane is given by:

proj(r(t) onto xz-plane) = (cos(t)/1)(0,1,0) = (0,cos(t),0)

To restrict this projection to −1 ≤ x ≤ 1, we need to set the x-component of the projection to x. Therefore, the final answer is:

( x, cos(t), 0 )

This equation represents a family of parametric equations, with x being the parameter. As x varies between −1 and 1, the projection moves along a line segment in the xz-plane, with the y-coordinate always equal to cos(t).

Learn more about vector at: brainly.com/question/24256726

#SPJ11

Rounding up to the nearest integer, the minimum sample size required is 184.

To find the minimum sample size required to estimate a population proportion or percentage with a margin of error of eight percentage points and a confidence level of 90%, we need to use the following formula:
n = [(Z-score)^2 * p * (1 - p)] / (margin of error)^2
where Z-score is the critical value for the desired confidence level, p is the estimated population proportion or percentage from a prior study, and the margin of error is given as eight percentage points.
For a confidence level of 90%, the Z-score is 1.645. Using the given value of p as 0.34, we can substitute these values in the formula to get:
n = [(1.645)^2 * 0.34 * (1 - 0.34)] / (0.08)^2
n = 183.54
Rounding up to the nearest integer, the minimum sample size required is 184.
Answer: The minimum sample size required to estimate a population proportion or percentage with a margin of error of eight percentage points and a confidence level of 90% is 184. This is calculated using the formula n = [(Z-score)^2 * p * (1 - p)] / (margin of error)^2, where Z-score is the critical value for the desired confidence level and p is the estimated population proportion or percentage from a prior study.

To know more about sample visit:

https://brainly.com/question/12823688

#SPJ11

The results of the vector operations are u · v = 6, v · v = 25, u^2 = (9, 4), (u · v)v = (24, -18), u · (5v) = 30

Let's calculate the given vector operations using the provided vectors u = (3, 2) and v = (4, -3):

u · v (dot product of u and v):

The dot product of two vectors is calculated by multiplying the corresponding components and summing them.

u · v = (3 * 4) + (2 * -3) = 12 - 6 = 6.

v · v (dot product of v with itself):

The dot product of a vector with itself gives the square of its magnitude.

v · v = (4 * 4) + (-3 * -3) = 16 + 9 = 25.

u^2 (square of u):

To square a vector, we square each component.

u^2 = (3^2, 2^2) = (9, 4).

(u · v)v (scalar projection of u onto v):

To find the scalar projection of u onto v, we first calculate the dot product of u and v, and then multiply the result by v.

(u · v)v = 6 * (4, -3) = (24, -18).

u · (5v) (vector projection of 5v onto u):

To find the vector projection of 5v onto u, we multiply 5v by the scalar projection of 5v onto u.

u · (5v) = (3, 2) · (5 * 4, 5 * -3) = (3, 2) · (20, -15) = (3 * 20) + (2 * -15) = 60 - 30 = 30.

Therefore, the results of the vector operations are as follows:

u · v = 6

v · v = 25

u^2 = (9, 4)

(u · v)v = (24, -18)

u · (5v) = 30

Learn more about vector operations here

https://brainly.com/question/20047824

#SPJ11

The length of the 120° arc in a circle with a radius of 3 meters is 2π meters.

We have,

To find the length of an arc in a circle, you can use the formula:

Arc Length = (θ/360) × 2πr

Where θ is the central angle in degrees, r is the radius of the circle, and π is a constant approximately equal to 3.14159.

In this case,

The radius is given as 3 meters, and the central angle is 120°.

Let's calculate the length of the arc:

Arc Length = (120/360) × 2π × 3

= (1/3) × 2π × 3

= (1/3) × 6π

= 2π

Therefore,

The length of the 120° arc in a circle with a radius of 3 meters is 2π meters.

Learn more about arc lengths here:

https://brainly.com/question/16403495

#SPJ1

The probability that Austin rolls a 2 or a 7, P is 1/6

From the question, we have the following parameters that can be used in our computation:

Rolling a 12-sided number cube

The sample space of a 12-sided number cube is

S = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12}

From the above, we have

Outcomes of a 2 or 7 = 2

Sample size = 12

Using the above as a guide, we have the following:

The probability that Austin rolls a 2 or a 7, P = 2/12

Simplify

The probability that Austin rolls a 2 or a 7, P = 1/6

Hence, the probability that Austin rolls a 2 or a 7, P is 1/6

Read more about probability at

https://brainly.com/question/31649379

#SPJ1

The dimension of the column space of a matrix is equal to the rank of the matrix as well , Dim Col A is also 2.

The maximum number of rows or columns in a matrix that are linearly independent is the matrix's rank.

Given that the null space of a 7 x 5 matrix is 3-dimensional, we can conclude that the rank of the matrix is:

Rank(A) equals the number of columns minus the size of the null space

= 5 - 3

= 2

So, Rank A is 2.

The dimension of the row space of a matrix is equal to the rank of the matrix. Dim Row A is therefore also 2.

A matrix's rank and the dimension of its column space are both the same.

For such more questions on dimension of the column space

https://brainly.com/question/31308205

#SPJ8

The inverse of the linear function f(x) = 6x + 12 is:

f⁻¹(x) = (x - 12)/6

Here we have the linear function:

f(x) = 6x + 12

We want to find the inverse function, this will be a function f⁻¹(x), such that when we evaluate the function in the inverse, we should get the identity, then we will get:

f(f⁻¹(x)) = x

Then we will get:

6*f⁻¹(x) + 12 = x

Solving for the inverse we will get:

6*f⁻¹(x) = x - 12

f⁻¹(x) = (x - 12)/6

That is the inverse function.

Learn more about inverse functions at:

https://brainly.com/question/3831584

#SPJ1

The correct statement based on the conclusion that the effect of social media use on anxiety depends on gender is c. The research study uncovered an interaction between social media use and gender, but no main effects.

This means that the effect of social media use on anxiety is different for males and females, and that the relationship between social media use and anxiety is not consistent across genders. There may be other factors that influence anxiety levels in addition to social media use and gender.

It is important to note that an interaction effect does not imply that there are no main effects, but rather that the main effects are not the same across groups. Therefore, there may be main effects of social media use and gender separately, but the interaction effect suggests that their combined influence on anxiety is more complex.

To know more about social media  visit:

https://brainly.com/question/15307312

#SPJ11

Equation 6: x = (11y + 3z - 303) / 16

Equation 9: 811y + 387z = 2,745

What is Elimination?

The method of elimination is where you actually eliminate one of the variables by adding two equations. In this way, you remove one variable in order to solve for the other variable. In a system of two equations, since you have two variables, eliminating one greatly simplifies the process of solving for the other.

To solve the system of equations using elimination, we'll eliminate one variable at a time until we find the values of x, y, and z.

Multiply the second equation by 2 and the third equation by -3 to make the coefficients of z the same in both equations:

Equation 2: 2x - 12y - 12z = 6

Equation 3: 12x - 9y - 6z = -42

Add the first equation to the modified second equation and the modified third equation:

Equation 1 + Equation 2: -6x - 5y - 3z + 2x - 12y - 12z = 393 + 6

=> -4x - 17y - 15z = 399 (Call this Equation 4)

Equation 1 + Equation 3: -6x - 5y - 3z + 12x - 9y - 6z = 393 - 42

=> 6x - 14y - 9z = 351 (Call this Equation 5)

Multiply Equation 5 by 2 and subtract Equation 4 from it:

2 * Equation 5 - Equation 4: 12x - 28y - 18z - (-4x - 17y - 15z) = 702 - 399

=> 16x - 11y - 3z = 303 (Call this Equation 6)

Multiply Equation 4 by 16 and add it to Equation 6:

16 * Equation 4 + Equation 6: -64x - 272y - 240z + 16x - 11y - 3z = 16 * 399 + 303

=> -48x - 283y - 243z = 6,399 (Call this Equation 7)

Divide Equation 7 by -1 to simplify the coefficients:

Equation 7: 48x + 283y + 243z = -6,399

Now we have the following system of equations:

Equation 6: 16x - 11y - 3z = 303

Equation 7: 48x + 283y + 243z = -6,399

We can solve this system using further elimination or substitution. Let's solve it using substitution.

From Equation 6, solve for x:

16x = 11y + 3z - 303

x = (11y + 3z - 303) / 16

Substitute this value of x into Equation 7:

48[(11y + 3z - 303) / 16] + 283y + 243z = -6,399

Simplify the equation:

528y + 144z - 9,144 + 283y + 243z = -6,399

Combine like terms:

811y + 387z = 2,745 (Call this Equation 8)

Now we have the following system of equations:

Equation 6: x = (11y + 3z - 303) / 16

Equation 8: 811y + 387z = 2,745

We can solve this system by further substitution or using a numerical method. Let's solve it using substitution.

From Equation 6, solve for x:

x = (11y + 3z - 303) / 16

Substitute this value of x into Equation 8:

811y + 387z = 2,745

Simplify the equation:

811y + 387z = 2,745 (Call this Equation 9)

Now we have the following system of equations:

Equation 6: x = (11y + 3z - 303) / 16

Equation 9: 811y + 387z = 2,745

We can solve this system by further substitution or using a numerical method. Let's solve it using a numerical method such as Gaussian elimination or matrix inversion.

To learn more about Elimination from the given link

https://brainly.in/question/54109548

#SPJ4

Answer: The mean, which is needed to be rounded to the nearest tenth, would be 10.6.

Step-by-step explanation:

Since this question is asking for the mean weight for eight cats, I will simply tell you what is the mean.

A mean of a data set is when you add the total of all of the numbers in the data plot and divide that number by how many numbers you added up. It is painfully a lot of math to do, so that's why it's really MEAN!

In this case, you will need to add "6, 13, 6, 14, 8, 13, 11, & 14" up together to find the total number which is 85.

Now, since there is eight numbers in this data plot, you divide 85 by 8 and you would get 10.625. To the nearest tenth, it would round to 10.6.

Therefore, the pet store's eight cats have an average weight of 10.6 pounds per cat. Hope this helps! :)

-From A Fifth Grade Honors Student

To solve the given equation 6(2x-1) = 4(x+1), will simplify the equation, solve for x, and identify any non-permissible values.

First, let's simplify the equation:

6(2x-1) = 4(x+1)

12x - 6 = 4x + 4

Next, let's collect like terms:

12x - 4x = 4 + 6

8x = 10

To isolate x, we divide both sides of the equation by 8:

8x/8 = 10/8

x = 5/4

So, the solution to the equation is x = 5/4.

To verify this solution, now substitute x = 5/4 back into the original equation:

6(2(5/4)-1) = 4(5/4+1)

6(10/4 - 1) = 4(5/4 + 4/4)

6(10/4 - 4/4) = 4(9/4)

6(6/4) = 36/4

36/4 = 36/4

The equation holds true, which verifies that x = 5/4 is the correct solution.

Finally, let's identify any non-permissible values. In this equation, don't have any variables or expressions with restrictions or limitations. Therefore, there are no non-permissible values in this equation.

To learn more about permissible - brainly.com/question/32723832

#SPJ11

The equation imply is: An increase of $1 in marketing is associated with an increase of $1,000 in sales.

According to the equation ŷ = 35,000 + 2x, where ŷ represents sales and x represents marketing, the coefficient of x is 2. This implies that for every $1 increase in marketing (x), there will be a corresponding increase of $2,000 in sales (ŷ).

Therefore, the correct answer is that an increase of $1 in marketing is associated with an increase of $2,000 in sales, as indicated by the coefficient value of 2 in the equation. It is important to note that the coefficient represents the rate of change between the two variables. In this case, for every unit increase in marketing, sales will increase by $2,000.

Learn more about Sales

brainly.com/question/31812972

#SPJ11