Answer:
See Explanation
Explanation:
We know that;
P= IV
Where;
P = power
I= current
V = voltage
Here, we have a voltage of 220V
Hence, for maximum rate;
P= IV
I = P/V
P = 840 W
V= 220 V
I= 840 W/220 V
I= 3.8 A
V = IR
R = V/I
R = 220/3.8
R = 57.9 Ω
For minimum heating;
P= 360 W
V= 220 V
I = P/V
I = 360 W/220V
I= 1.6 A
V= IR
R = V/I
R = 220 V/1.6 A
R = 137.5 Ω
Scienctists agree that the world's climate is getting hotter. What do you think might happen as a result of this climate change?
Answer:
Bad things
Explanation:
Global warming has many terrible effects on people and the earth itself
such as, death, birth defects, asthmea, breathing conditions, increased diseases.
I believe the answer is D but wanted to make sure.
Answer:
Yes you are right
Explanation:
hope this helps and I get the Brain thingy whatever it call
What are the lower and upper fixed points of a laboratory thermometer in Celsius degrees?
The lower fixed point, or ice point, is the temperature of pure melting ice at normal atmospheric pressure. The upper fixed point, or steam point, is the temperature of pure boiling water at normal atmospheric pressure.
Put the following objects in order by their
weights with the heaviest first.
A) a glass bottle filled with air at atmo-
spheric pressure:
B) a glass bottle filled with helium at at-
mospheric pressure;
C) an empty glass bottle (vacuum inside).
?? Physics
Answer:
I Think its ABC
Explanation:
No air is the lightest
Helium is lighter than regular air that's why it goes up so then the regular air would be heaviest.
what is the line that joins northen and southren hemisphere of the earth is called a
The line is called equator.
CAN SOMEONE PLEASE HELP FIGURE THIS OUT PLEASE
Victor put a match on a balance and found that its mass was 6.0 grams. Then he lit the match and put it out after a few seconds.
He put the partially burned match on the balance again. This time, its mass was 4.5 grams.
Which of the following best explains what happened as the match burned?
A.
Some of the mass was destroyed by the fire.
B.
The matter moved to a different part of the match.
C.
Some of the matter changed from solid to gas and went into the air.
D.
The mass of the match combined with the mass of the fire.
Answer:
b
Explanation:
I Need Help, Thank you! ^^ <3
How can global warming lead to changes to the Earth’s surface?
a.
Global warming can lead to an increased number of earthquakes, which change the Earth’s surface.
b.
Global warming can lead to glaciers melting, causing flooding to areas and the decrease of glacial land masses.
c.
Global warming leads to a decrease in water levels of coastal wetlands.
d.
Global warming cannot lead to changes to the Earth’s surface.
Please select the best answer from the choices provided
A
B
C
D
Answer:
A
Explanation:
But global warming will have additional, far-reaching effects on the planet. Warming modifies rainfall patterns, amplifies coastal erosion, lengthens the growing season in some regions, melts ice caps and glaciers, and alters the ranges of some infectious diseases.
Answer:
I think it is B since Global warming can lead to glaciers melting and cause flooding since the water will get warmer resulting in the ocean rising, which causes flooding
Explanation:
What will be the mass of a body at the center of the earth as compared to other places on
the earth?
Answer:
The mass of the object does not change by moving it to another place. ... At the center of the earth the net gravitational force is zero, so the weight will be zero, but its masses will remain same. Hence the mass at the centre of earth will be equl to 50 kg.
Explanation:
It's because the mass of the object doesn't change by moving it to next place.
Which scenario did not include a chemical change?
Answer:
what scenario i dont understand
Explanation:
step by step explenation
As distance increases, gravitational force________
Answer:
Decreases
Explanation:
Answer:
Decreases
ExplanatIon:
Electrons move from negative to positive while the voltage flows ________ to _______ .
Answer:
positive to negative.
An archer shoots an arrow 75 m distant target; the bull's-eye of the target is at the same height as the release height of the arrow. If d = 75 m and v = 37 m/s. At what angle must the arrow be released to hit the bull's-eye if its initial speed is 37 m/s?
Answer:
[tex]16.25^{\circ}[/tex]
Explanation:
R = Horizontal range of projectile = 75 m
v = Velocity of projectile = 37 m/s
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
Horizontal range is given by
[tex]R=\dfrac{v^2\sin2\theta}{g}\\\Rightarrow \theta=\dfrac{\sin^{-1}\dfrac{Rg}{v^2}}{2}\\\Rightarrow \theta=\dfrac{\sin^{-1}\dfrac{75\times 9.81}{37^2}}{2}\\\Rightarrow \theta=16.25^{\circ}[/tex]
The angle at which the arrow is to be released is [tex]16.25^{\circ}[/tex].
A 10cm3 sample of copper has a density of 897g/cm3. What is the mass of the sample?
A 10cm³ sample of copper has a density of 897g/cm³. What is the mass of the sample ?
Answer:-Given:-Density of sample of copper is 897g/cm³.
Volume of sample of copper is 10cm³.
To Find:-The mass of the sample.
Solution:-We know,
[tex] { \boxed{\bf{\rm \red {Mass \: = \: Density \: × \: Volume}}}} [/tex]
So, Mass = 897g/cm³ × 10cm³
Mass = 8970 g
The mass of the sample is 8970 g. [Answer]Amy pulls a spring with a spring constant k = 100 stretching it from its rest length of 0.10 m to 0.2
Answer:
Elastic potential energy E = 0.5 J
Explanation:
Let us assume we have to find the elastic potential energy stored in the spring.
Given: k = 100
change in the length of the spring x = 0.2-0.1 = 0.1 m
Elastic potential energy
E = [tex]\frac{1}{2} kx^2[/tex]
plugging the values we get
[tex]E = 0.5\times100\times0.1^2\\=0.5 J[/tex]
Hence, Elastic potential energy E = 0.5 J
Amy pulls a spring with a spring constant k = 100 N/m, stretching it from its rest length of 0.10 m to 0.20 m.
What is the elastic potential energy stored in the spring?
Answer: 0.5 J
Which best describes what the observations have in common? They involve nuclear energy. They involve radiant energy. They involve changes in waves. They involve changes in energy.
Answer:
The answer is "They involve changes in energy".
Explanation:
Energy change is quite important in chemicals because nearly all reactions involve activation energy. They will learn and learn how to utilize different types of energy shifts in the steam cycle. A conversation about what drives chemical processes contributes to entropy and natural energy principles. It may shift from the shape of form. For example, chemicals might change to heat. Laser light can turn substances into power. Its energy can be changed into different kinds, but not wasted or produced.
Answer:
D
Explanation:
change in energy please give brainliest (edge 2021)
The speed of light is 300,000,000 m/s. Red light has a wavelength of 0.0000007 m. What is its frequency?
Answer:
2.33..
Explanation:
f = wavelength/speed
= 0.0000007/300000000
= 2.333...
A 30 kg box is pushed along a horizontal surface. The person pushing the box pushes with a constant force of 300 N directed at an angle of 30° below the horizontal. If the box starts from rest and reaches a speed of 5 m/s after only 2 seconds of pushing, find the force of friction acting on the box.
Answer:
aye son yall think if i keep answering these questions incorrectly.. they'll find out what im doing and take my li points back?
Explanation:
The magnetic field of a bar magnet Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer. a Always points from north to south, whether we look outside the magnet or inside the magnet. b Always points from south to north, whether we look outside the magnet or inside the magnet. c Points from north to south outside the magnet, but south to north inside the magnet. d Points from south to north outside the magnet, but north to south inside the magnet.
Answer:
A: Always points from north to south, whether we look outside the magnet or inside the magnet
Explanation:
When we freely suspend a bar magnet, it's magnetic field will always rest in the north to south direction due to the fact that the Earth's magnetic south pole usually lies in the direction of the geographic north while the Earth's magnetic north pole usually lies in the direction of the geographic south.
Now, we all know that in magnets, like poles will repel and unlike poles will attract. What this now means is that the magnet will always point from the north to the south direction.
list and describe the units of power
Answer:
On the other hand, power is a scalar quantity and is basically the amount of energy consumed per unit time which has no direction.
Horsepower HP 746 watts
Kilowatts kW 1×103W
Megawatts MW 1×106W
Gigawatts GW 1×109W
The S.I unit of power is Watt(W) which is joule per second.
A double slit produces a diffraction pattern that is a combination of single and double slit interference. Find the ratio of the width of the slits to the separation between them, if the first minimum of the single slit pattern falls on the fifth maximum of the double slit pattern. (This will greatly reduce the intensity of the fifth maximum.)
Answer:
The ratio of the width of the slits to the separation between them is 1:5
Explanation:
For this set of question
n = 1, m = 5
As we know for nth minimum
[tex]D sin\theta =n \lambda[/tex]
For mth Maximum
[tex]d sin\theta =m \lambda[/tex]
From the above two equations we get
[tex]Sin\theta = \frac{1*\lambda}{D} \\d * \frac{1*\lambda}{D} = 5 *\lambda\\\frac{D}{d} = \frac{1}{5}[/tex]
The ratio of the width of the slits to the separation between them is 1:5
heena wants to measure the volume of a ball that is 24 cm across. How should she set up her equation? v = one-third pi 24 squared (12). v = one-third p 12 squared (24). v = four-thirds pi 24 cubed. v = four-thirds pi 12 cubed.
Answer:
v = four-thirds pi 12 cubed.
Explanation:
A ball has a spherical shape. The volume of a spherical shape can be calculated using the following formula:
[tex]V = \frac{4}{3} \pi r^3[/tex]
where,
V = Volume of Ball = ?
d = diameter of the ball = length across the ball = 24 cm
r = radius of ball = d/2 = 24 cm/2 = 12 cm
Therefore,
[tex]V = \frac{4}{3}\pi (12)^3[/tex]
Hence, the correct answer is:
v = four-thirds pi 12 cubed.
Which can cause physical weathering of rock?
A acid
B oxygen
C sun
D wind
Answer:
D wind
Explanation:
Heavy winds may cause much damage to the Earth along with rain and extreme temperature changes.
A load uses a current of 5.0 A when it is attached to a 20 V source. What is the resistance of the load?
Answer: 4.0 ohm
Explanation:
HELP ME PLEASEEEEEEEEEEEEEEE
Use the kinetic energy equation to explain why speed has a greater impact on kinetic energy than mass.
Answer:
KE = 1/2 M V^2 Equation to express kinetic energy
Since the result depends linearly on M and to the second power on V,
V has greater effect on the result.
Power is the rate at which...........is done or the rate at which........... is converted from one form to another .
Answer:
the answer is c I thought
4. Un móvil viaja en línea recta con una velocidad media de 1200 cm/s durante 9 s, y luego con velocidad media de 480 cm/s durante 7 s, siendo ambas velocidades del mismo sentido: a) ¿cuál es el desplazamiento total en el viaje de 16 s? B) ¿cuál es la velocidad media del viaje completo?
Answer:
A) El desplazamiento total del viaje es 14160 centímetros.
B) La velocidad media del viaje completo es 885 centímetros por segundo.
Explanation:
A) El desplazamiento es el producto de la velocidad media por el tiempo. El desplazamiento total es la suma de desplazamientos asociados a cada velocidad media, entonces:
[tex]x = \left(1200\,\frac{cm}{s}\right)\cdot (9\,s)+ \left(480\,\frac{cm}{s} \right)\cdot (7\,s)[/tex]
[tex]x = 14160\,cm[/tex]
El desplazamiento total del viaje es 14160 centímetros.
B) La velocidad media del viaje es el desplazamiento total dividido por el tiempo total, es decir:
[tex]\bar v = \frac{14160\,cm }{16\,s}[/tex]
[tex]\bar v = 885\,\frac{cm}{s}[/tex]
La velocidad media del viaje completo es 885 centímetros por segundo.
The atomic number of an element is also the number of
_________ element.
in an
A. Protons
B. Neutrons
C. Electrons
What two types of tactical communication vary based on whether or not you speak?
Answer:
If you don't have autism/deaf/anything like that you should be able to speak
Explanation:
Answer:
Verbal and nonverbal
Explanation:
Took the test
How you work out efficiency?
Answer:
The work efficiency formula is efficiency = output / input, and you can multiply the result by 100 to get work efficiency as a percentage. This is used across different methods of measuring energy and work, whether it's energy production or machine efficiency.
Explanation:
Hope this helped!!!