We first set about determining the empirical formula of the compound. From the principle of mass conservation, we can assume that the empirical compound contains 4.04 g of N and 11.46 g of O.
We now convert the mass of each element into the number of moles by dividing by the molar mass.
(4.04 g N)/(14.0067 g/mol) = 0.2884 mol N
(11.46 g O)/(15.999 g/mol) = 0.7163 mol O.
To find the empirical formula, we divide each molar quantity by the smaller of the two. That would be the number of moles of nitrogen.
(0.2884)/(0.2884) = 1
(0.7164)/(0.2884) = 2.48 ≈ 2.5.
To make both whole numbers, we multiply each numeral by 2:
(1)(2) = 2
(2.5)(2) = 5.
So, the empirical formula of our compound is N₂O₅.
To find the molecular formula of our compound, we must find the factor by which the molar mass of the actual compound differs from the molar mass of the empirical compound. The molar mass of the empirical compound, N₂O₅, is 108.01 g/mol. We are told that the molar mass of the actual compound is 216.0 g/mol. So, the two differ by a factor of (216.0 g/mol)/(108.01 g/mol) = 1.99 ≈ 2.
The molecular formula of this compound is thus N₂ₓ₂O₅ₓ₂ or N₄O₁₀.
Which are different structures of the eye? Select four options.
please help !!!!!!!!
pupil
cochlea
cornea
auricle
retina
lens
Answer:
Pupil, Cornea, Retina, and Lens
Explanation:
Using your own words, explain energy.
CH4O+ O2 → CO2 + H2O
Balance the following chemical equation
Answer:
2 CH4O + 3 O2 = 2 CO2 + 4 H2O
Why do you think it is a bad idea to use taste, touch, or smell to identify an
unknown chemical?
Answer:
Because it can cause health problems or injuries to our sense organs.
Explanation:
Chemicals in the laboratory are made up of different constituents, which may be dangerous or injurious to health. This is the reason why safety measures or precautions have to be taken when working in the laboratory. One of those safety measures is that "one should never use taste, touch, or smell to identify an unknown chemical".
This is so because a chemical that is unknown amounts to the fact that what such chemical contains is unknown, hence, the chemical might have the ability to cause harm or injuries to the sense organ. For example, a conc. acid that is tasted will burn the tongue etc.
(Answer ASAP)
In which state(s) of matter could a substance have thermal energy?
A) Only liquids and gases
B) Only liquids and solids
C) Only liquids
D) Liquids, solids, and gases
लेख्नुहोस् । (Deserts are very hot during the day and very cold
during the night. Give reason.)
Because deserts have such little water vapor in the air, it makes it harder to trap heat or cold in a desert. And at night, the sun no longer heats the desert and the heat from the day doesn't stay trapped. Because of this, some deserts can get extremely cold at night, dropping to temperatures below 40F.
Hope this helps!! Have a wonderful day!!
It is actually sand, which turns the entire phenomenon hot. Sand cannot hold the heat. It acts like a mirror to the sun. During the daytime, it stays warm, and when the Sun is absent it loses all its heat making the nights colder. There’s nothing in the desert that can either absorb heat from the sun or hold it on the surface when the sun is set.
116
Sn
50
Write the complete nuclear equation for alpha absorption
which of the following statements explains why fossil fuels are nonrenewable resources
Answer:
the first one
Explanation:
N2(g) + 2 O2(g) → 2 NO2(g)
Answer
Answer:
180.6
Explanation:
N2 (g) + 2O2 (g) → 2NO2 (g) ΔH = 66.4 kJ
2NO (g) + O2 (g) → 2NO2 (g) ΔH = -114.2 kJ
Hope this helped, and please mark as Brainliest :)
How is the periodic table used to determine properties of elements
Answer:
I don't know
Explanation:
hindi ko alam
PLEASEEEE HELPPP??????
Answer:
(B) Grasses to Grasshoppers to Birds to Foxes
Explanation
Version: TAKEHOME
1) The ionic compound below is soluble in water. Complete the following:
-Draw the interaction of the ionic compound and water in the proper orientation. 3pts
-On the line below discuss the strength of the interaction within the compound compared to the strength of interaction
between the compound and water.
Answer:
The hydrogens of the water molecules around the bromide ion will need to be faced toward it, whereas the oxygens of the water molecules around the potassium ion will need to be faced toward it.
The strength of the interaction within the compound will supersede that of the interaction between the compound and water.
Explanation:
To answer this question, you need to be aware of the structure of a water molecule and its components. A water molecule has the chemical formula of H2O, and oxygen is inherently electronegative, meaning that it attracts electrons very strongly. As a result, when it is in H2O, it pulls the valence electrons of the H atoms very strongly, which results in the H atoms being partially positively charged and the O atom being partially negatively charged. Therefore, the O atom is going to be attracted to the potassium ion, whereas the H atom is going to be attracted to the bromide ion.
The answer to the second part of the question is as written above because ionic bonds are stronger than ion-dipole bonds; that's just the way it is.
The complete
conversion of 90.0
grams of hydrogen to
ammonia would require
how many moles of
nitrogen gas?
Answer:
15moles
Explanation:
The balanced equation of this reaction is as follows:
N2 + 3H2 → 2NH3
Molar mass of H2 = 2g/mol
mole = mass/molar mass
mole = 90/2
mole = 45moles.
Based on the above balanced equation, 1 mole of nitrogen gas (N2) reacts with 3 moles of hydrogen gas (H2)
Hence, 45moles of hydrogen gas will produce (45 × ⅓) = 15moles of nitrogen gas (N2).
Answer:
Its 14.9 for those who are doing the escape room :)
Explanation:
Read the chemical equation.
Mg + HCI - MgCl2 + H2
How many liters of hydrogen gas is produced at 298 K and 0.940 atm if 4.00 moles of hydrochloric acid react with an excess of magnesium metal?
O 26.0 liters
O 52.1 liters
82.3 liters
104 liters
Answer:
74.04 liters of hydrogen gas are produced.
Explanation: According to reaction, 2 mol of HCl gas gives 1 mole of hydrogen gas, then 6 moles of HCl gas will give: moles of hydrogen gas that is 3 moles.
The pressure of the hydrogen gas at 298 K = 0.990 atm
The volume occupied by the hydrogen gas = V
Number of hydrogen has moles = 3 moles
PV=nRT
V = 74.04 L
74.04 liters of hydrogen gas are produced.
Answer:
38.2 liters Is the answer
Explanation:
Sam did an experiment. He boiled water in a teapot and saw vapor coming out. When he placed a cold plate in contact with the vapor it formed droplets of water.? Can you imagine what was that process and Why did he observe this?
Answer:
evaporation and condesation
Explanation:
because he was curiuos
For the following Bronsted acid-base reaction, complete the reaction, identify the acid, base, conjugate
acid and conjugate base. HF + PO4^-3
Answer:
algun moderador puede acabar a este otro este me borró respuesta que no debió borrar
CH3OH can be synthesized by the reaction:
CO(g) + 2 H20) — CH3OH)
What volume of CH3OH gas (in L) can be synthesized if 18.6 L of Hy gas completely reacts at STP conditions?
Answer:
5
Explanation:
What are the controlled, independent, and dependent variables in a basic density column experiment?
WILL MAKE BRAINLIEST
Answer:
The Independent Variable is what we change or control in the experiment. The Dependent Variable is what we are testing and will be measured in the experiment. The Control Variables are what we keep the same during the experiment to make sure it's a fair test. hope this helps =)
Explanation:
The unit for work is the _______ which is also called the ____________.
solve the following equation:13x - 22 = 30
Answer:
52/13
Explanation:
13X=30+22
x=52/13
solid sodium chloride is dissolved in water. the sodium chloride solution is electrolysed in the apparatus. state why sodium chloride solution , rather than solid chloride must be used in this experiment.
Answer: water solutions conducts charge
Explanation: solid sodium chloride is n insulator.NaCl is dissolved in water
In ionic forms. In solution there are Na+ and Cl- ions which can transfer charge.
If 35.4 liters of hydrogen gas are used, how many liters of nitrogen gas will be needed for the above reaction at STP?
Answer:
ujdbdbfbf fbFbsygtsjysnsgndhngsnsgnafbfa
4.2 L of a gas has a pressure of 560mmHg at 72⁰F. What is the temperature at760mmHg if the volume is still 4.2 L? (5 pts)
Answer:
The temperature at 760mmHg if the volume is still 4.2 L is 400.862 K
Explanation:
Gay Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. This law can be expressed mathematically as follows:
[tex]\frac{P}{T} =k[/tex]
Having an initial state 1 and a final state 2, the following is true:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= 560 mmHgT1= 72 F= 295.372 K (being 32 F= 273.15 K)P2= 760 mmHgT2= ?Replacing:
[tex]\frac{560 mmHg}{295.372 K} =\frac{760 mmHg}{T2}[/tex]
Solving:
[tex]T2= 760 mmHg*\frac{295.372 K}{560 mmHg}[/tex]
T2= 400.862 K
Una solución hallar punto de vista física y punto de vista químico (sal) 50g de sal y 250 ml de agua hallar %m/m %m/v molalidad, molaridad, fracción molar del soluto y del solvente
Answer:
% m/m = 16.6%
% m/v = 20%
3.42 m (molalidad)
3.42 M (molaridad)
Fraccion molar del soluto = 0.06
Fraccion molar del solvente = 0.94
Explanation:
Nuestra solución está compuesta por:
Soluto: 50 g de sal
Solvente: 250 mL de agua.
%m/m %m/v molalidad, molaridad, fracción molar del soluto y del solvente son distintas formas de definir la concentración:
% m/m son los gramos de soluto cada 100 g de solución.
No sabemos la masa de solución pero con la densidad del agua (solvente), sabemos que los 250 mL contienen 250 gramos de solvente. (Densidad del agua 1g/mL). En conclusión, la masa de solución es 50 g + 250g = 300
% m/m = (50g /300g ) . 100 = 16.6%
Vamos a definir que el volumen de la solución es igual al del solvente: 250 mL.
% m/v = la masa de soluto, cada 100 mL de solución
= (50 /250) . 100 = 20 %
Molalidad, son los moles de soluto por cada kg de solvente.
Convertimos gramos a kg → 250 g . 1kg /1000g = 0.25kg
Convertimos la masa de soluto (sal) a moles.
NaCl → 50 g . 1mol/ 58.45g = 0.855 moles
m = 0.855 /0.25 → 3.42 m (molalidad)
Molaridad son los moles de soluto por cada L de solución.
Convertimos mL a L → 250 mL . 1kg / 1000mL = 0.25 L
sabiendo que los moles de soluto son 0.855, en este caso la molaridad es igual a la molalidad ( 3.42 M)
Para calcular la fracción molar, necesitamos moles de soluto y de solvente.
Ya contamos con los moles de soluto.
Moles de solvente: 250 g . 1mol /18g = 13.89 mol
Moles totales = 0.855 + 13.89 = 14.745
Fracion molar del soluto: (0.855/ 14.745) = 0.06
Fraccion molar del solvente: (13.89 / 14.745) = 0.94
HURRY ILL GIVE BRAINLIEST!
Match the cause to its effect.
Answer:
Cattles are giving nutrition supply throughout the year----some animals require nutrient enhancement for health
calves are given colostrum at birth----newborns require antibodies from their mothers
I dont want to write, so you know what the last option is
Explanation:
:) hope this helps
HELP ASAP!!!
WAVES ALWAYS ORIGINATE WITH SOME
a
person
b
object
C
disturbance
Answer:
Disturbance
Explanation:
I believe it is Disturbance because waves are normally caused by wind, and wind classifies as Disturbance.
____________ is refining the extracted raw metals into a purest form
Answer:
Extractive metallurgy
Explanation:
Extractive metallurgy is the practice of removing valuable metals from an ore and refining the extracted raw metals into a purer form.
Which statement describes proper conduct in the laboratory?
Select one:
O a. Eating snacks in the laboratory is allowed.
O b. In order to identify things they should be tasted.
O c. Colorless fumes should be identified by direct smelling.
O d. Be aware of the location of safety and first aid equipment.
Answer:
D.
Explanation:
I mean. It's logic for sure
Answer:
Its D and pls mark brainliest
Explanation:
Please answer ASAP,
Why does the earth experience high tides?
High tides occur because Jupiter is in alignment with Saturn
The gravitational force of the moon attracts the water and solid earth, pulling them closer to the moon
The gravitational pull of the moon causes areas of water that bulge away from the earth.
High tides occur because the comet Neowise passed by Earth
Answer:
B
Explanation:
I took the test and GOT an A
What is simple chemical test could you carry out to see if carbon dioxide has been produced
Carbon Dioxide
A positive test will result in the lime water turning milky. Lime water turns milky as the Calcium hydroxide (chemical name for limewater) reacts with carbon dioxide to form Calcium Carbonate which is insoluble in water and thus forms a milky white precipitate.