Determine if the following would be a buffer system.
H3PO4 and NaH2PO4
H3PO4 and Na2HPO4
sorry i dont know Explanation:
What is the correct formula for the missing product from the equation below:
Na2CO3(aq)
+
CaCl2 (aq)
> NaCl +
Answer:
CaCO3 (s)
Explanation:
This equation is a double replacement equation, which means that since Na and Cl and paired, Ca and CO3 will be paired.
Then, you look at the charge of each element and balance
Ca has a 2+ charge
CO3 has a 2- charge
The 2+ charge and the 2- charge will cancel so there is no need for a subscript or to balance the equation
The complete equation will be Na2CO3 (aq) + CaCl2(aq) -> NaCl (aq) + CaCO3 (s)
I hope this helps and have a great day!
What is the density of a book with a mass of 60g and a volume of 20 cm3? *
Answer:
[tex]3 g/cm^{3}[/tex]
Explanation:
Density is a measure of a substance's mass over its volume.
d = m/v
Therefore d = 60g/20cm3 = 3 g/cm3
Worth many points (timed test)
A 54.2 g sample of an unknown metal is heated to 48.00 degrees Celsius.
It is then placed in a coffee-cup calorimeter filled with water.
The calorimeter and the water have a combined mass of 183.1 g and an overall specific heat of 1.34 cal/g•°C.
The initial temperature is 10.2°C when the metal is added.
The system reaches a final temperature of 23.00 °C.
(show work)
Answer:
2.335 J/g*degrees celcius
Explanation:
Beth has two unlabeled balloons, one filled with hydrogen gas and the second filled with neon gas. She researches and writes down the density of hydrogen and neon. Beth also has several chambers filled with various gases and a poster showing the densities of these gases. She has no other materials or tools available to her to help her identify the element in each balloon.The poster and Beth’s data are shown.
Which equation is correctly balanced?
A) CaO + 2H2O + Ca(OH)2
B) NH3 + 202 → HNO3 + H20
C) Ca(OH)2 + 2H3PO4 → Ca3(PO4)2 + 3H2O
D) Cu + H2SO4 → CuSO4 + H2O + SO2
CaO + 2H2O + Ca(OH)2 is a balance chemical equation. Therefore, option A is correct.
What is balance chemical equation ?A balanced chemical equation is one that has the same number of atoms of each type in the reaction on both the reactant and product sides. In a balanced chemical equation, both the mass and the change are equal.
When a chemical reaction occurs, the mass of the products should be equal to the mass of the reactants, according to the law of conservation of mass. As a result, the number of atoms in each element remains constant during the chemical reaction. As a result, the chemical equation must be corrected.
The chemical equation is said to be balanced if there are no inequalities. Every element in this example now has an equal number of atoms on both the reactant and product sides.
Thus, option A is correct.
To learn more about balance chemical equation, follow the link;
https://brainly.com/question/28294176
#SPJ2
Using standard formation enthalpies, calculate the standard reaction enthalpy for this reaction. 6CO2(g) + 6H2O(l)C6H12O6 + 6O2(g) ANSWER: kJ/mol
Answer:
2802.5 KJ/mol
Explanation:
Calculate standard enthalpy of the Reaction :
6CO2(g) + 6H2O(l)C6H12O6 + 6O2(g)
using standard formation enthalpies . hence the standard enthalpy of the reaction = 2802.5 KJ/mol
attached below is the detailed solution
Which characteristic of a planet describes whether the planet has a thick or thin layer of gas?
Atmosphere
Moons
Rings
Surface composition
Answer:
Atmoshphere!
Explanation:
I took the test and got a 100%! :) Hope this helps, plz mark brainliest!
1. What is an air mass? 2. What 2 factors characterize an air mass? 3. What determines the two characteristics of an air mass? 4. What would a cold and wet air mass be called? 5. What would a warm and dry air mass be called? 6. What type of air mass do you think would form over Canada? 7. What kind of weather is associated with a cold front? 8. What kind of weather is associated with a warm front? 9. What symbol on a map represents a warm front? 10. What symbol on a map represents a cold front? 11. What type of weather is associated with a stationary front? 12. How does an occluded front form? 13. What kind of weather can an occluded front bring? 14. What is the symbol on a map to show an occluded front?
Answer:
1. a body of air with horizontally uniform temperature, humidity, and pressure.
2. Boundaries between unlike air masses. Air masses have fairly uniform temperature and moisture content in horizontal direction (but not uniform in vertical). Air masses are characterized by their temperature and humidity properties.
3. Air masses have fairly uniform temperature and moisture content in horizontal direction (but not uniform in vertical). Air masses are characterized by their temperature and humidity properties.
4. Continental air masses are characterized by dry air near the surface while maritime air masses are moist. Polar air masses are characterized by cold air near the surface while tropical air masses are warm or hot.
5. Continental air masses form over land and are dry. Therefore, an air mass that develops over northern Canada is called a continental polar air mass and is cold and dry. One that forms over the Indian Ocean is called a maritime tropical air mass and is warm and humid.
6. an air mass that develops over northern Canada is called a continental polar air mass and is cold and dry.
7. Commonly, when the cold front is passing, winds become gusty; there is a sudden drop in temperature, and heavy rain, sometimes with hail, thunder, and lightning.
8. stormy
9. The symbol that is used to identify a cold front on a weather map is a blue line with triangles that point in the direction in which the cold front is moving. The line is represents the leading edge of the cooler air mass.
10. The symbol that is used to identify a cold front on a weather map is a blue line with triangles that point in the direction in which the cold front is moving. The line is represents the leading edge of the cooler air mass
11. Because a stationary front marks the boundary between two air masses, there are often differences in air temperature and wind on opposite sides of it. The weather is often cloudy along a stationary front, and rain or snow often falls, especially if the front is in an area of low atmospheric pressure.
12. At an occluded front, the cold air mass from the cold front meets the cool air that was ahead of the warm front. The warm air rises as these air masses come together. Occluded fronts usually form around areas of low atmospheric pressure.
13. The temperature drops as the warm air mass is occluded, or “cut off,” from the ground and pushed upward. Such fronts can bring strong winds and heavy precipitation. Occluded fronts usually form around mature low pressure areas.
14.An occluded front is a combination of those two signs. They are indicated on a weather map either by a purple line with alternating semicircles and triangles pointing in direction of travel, or by red semicircles and blue triangles pointing in the same direction.
Explanation:
:)
Answer:
Heya
Explanation:
1) air mass:- An air mass is a large volume of air in the atmosphere that is mostly uniform in temperature and moisture.
2) Air masses are characterized by their temperature and humidity properties.
3) ( same answer i.e. temperature and humidity properties).
4) Colder air masses are termed polar or arctic, while warmer air masses are deemed tropical. Continental and superior air masses are dry while maritime and monsoon air masses are moist. Weather fronts separate air masses with different density (temperature or moisture) characteristics.
5) Continental air masses are characterized by dry air near the surface while maritime air masses are moist. Polar air masses are characterized by cold air near the surface while tropical air masses are warm or hot. Arctic air masses are extremely cold.
6) Maritime air masses form over water and are humid. Continental air masses form over land and are dry. Therefore, an air mass that develops over northern Canada is called a continental polar air mass and is cold and dry.
7) Commonly, when the cold front is passing, winds become gusty; there is a sudden drop in temperature, and heavy rain, sometimes with hail, thunder, and lightning. Lifted warm air ahead of the front produces cumulus or cumulonimbus clouds and thunderstorms.
8) Warm fronts often bring stormy weather as the warm air mass at the surface rises above the cool air mass, making clouds and storms. Warm fronts move more slowly than cold fronts because it is more difficult for the warm air to push the cold, dense air across the Earth's surface.
9) The symbol that is used to identify a warm front on a weather map is a red line with half circles that point in the direction in which the warm front is moving. The line represents the leading edge of the warmer air mass.
10) On weather maps, the surface position of the cold front is marked with the symbol of a blue line of triangles/spikes (pips) pointing in the direction of travel.
11) Because a stationary front marks the boundary between two air masses, there are often differences in air temperature and wind on opposite sides of it. The weather is often cloudy along a stationary front, and rain or snow often falls, especially if the front is in an area of low atmospheric pressure.
12)At an occluded front, the cold air mass from the cold front meets the cool air that was ahead of the warm front. The warm air rises as these air masses come together. Occluded fronts usually form around areas of low atmospheric pressure.
13) The warm air mass rises as the cool air masses push and meet in the middle. The temperature drops as the warm air mass is occluded, or “cut off,” from the ground and pushed upward. Such fronts can bring strong winds and heavy precipitation. Occluded fronts usually form around mature low pressure areas.
14)Occluded fronts are drawn as a solid purple line with half circles and triangles pointing in the direction that the front is moving. An occluded front usually brings dry air.
[tex] \underline \blue{ \fbox{check \: the \: attachment \: too \: :) }}[/tex]
The value of Kp for the reaction 2 A(g) + B(g) + 3 C(g) → 2 D(g) + E(g) is 18530 at a particular temperature. What would be the value of Kp for the reaction 2 D(g) + E(g) → 2 A(g) + B(g) + 3 C(g)?
Answer:
[tex]Kp2=5.3967x10^{-5}[/tex]
Explanation:
Hello there!
In this case, since the Kp for the first reaction is given, according to the following equilibrium expression:
[tex]Kp=\frac{p_D^2p_E}{p_A^2p_Bp_C^3} =18530[/tex]
However, since the second reaction stands for the reverse of the initial one, the equilibrium expression would be:
[tex]Kp_2=Kp=\frac{p_A^2p_Bp_C^3}{p_D^2p_E}[/tex]
And therefore its Kp the inverse of the aforementioned one:
[tex]Kp2=1/18530\\\\Kp2=5.3967x10^{-5}[/tex]
Best regards!
What ratio of NaCN to HCN is needed to prepare a pH 9.40 buffer? (Ka of HCN is 4.9 × 10⁻¹⁰)
Answer: The ratio of NaCN to HCN is, 1.26
Convert 17oC to kelvin
Answer:
290
Explanation:
Temperature in kelvin = 273 + Temperature in ⁰C
Answer: °Celsius Kelvin
25.00 298.15
25.01 298.16
25.02 298.17
25.03 298.18
25.04 298.19
25.05 298.20
25.06 298.21
25.07 298.22
25.08 298.23
25.09 298.24
How are the respiratory, urinary, and integumentary systems involved in the removal of waste. (list)
Answer:
The lungs in the respiratory system excrete some waste such as carbon dioxide. The bladder helps to remove waste by urination.Circle all that apply for an anion.
a. Positively charged
b. Negatively charged
c. Metal
d. Nonmetal
e. Loses electrons when formed
f. Gains electrons when formed
g. Listed first in a compound
h. Listed second in a compound
Answer:
b. d. f. h
Explanation:
Anions are negatively charged. They are usually non metals with few exceptions. They need to gain electrons in order to form and they are always listed after cation in a compound.
What is the name of this hydrocarbon?
Answer:In the given molecule the methyl group is attached at the second carbon atom of the parent chain. Therefore the name of hydrocarbon is 2-methylbutane.
Explanation:
When cobalt(II) chloride is allowed to react with sodium hydroxide, the resulting
products are cobalt(II) hydroxide and sodium chloride. Determine the mass of
cobalt(II) chloride required to completely react with 114g of sodium hydroxide.
Answer:
Reaction CoCl2 + 2 NaOH -> Co(OH)2 + 2 NaOH
You need to count number of moles of NaOH
Amount of mole is n = m/M = 114 g / 39.998 g/mol = 28,5 mol (about)
Amount of CoCl2 is half from that
Calculate molar mass of CoCl2 and multiply it by 28,5 mol
Explanation:
PLSSSS HELP
this is science
Answer:
The answer is CExplanation:
when a car begins to slow down the speed that it was going will decrease. Which means that it is an example of deceleration.
Answer:
The answers would be : ( a car approaching a red light )
15 N .
F= m.a ----> 15 = 5.3
Helllppp meee!! Please
Answer:
a bus moves on a straight road then makes a right turn
Explanation:
yes
A case of paper has a mass of 2000 g. A case of paper contains 10 reams of paper. One ream of paper is 500 sheets. What is the mass, in grams, of 50 sheets of paper?
Answer:
s8sooooosoossososososkdk
HELPP ASAP I’ll mark you as brainlister 100 points :((((
Answer:
the pool table one
Explanation:
cuz gas just goes EVERYWHERE
how are three of the properties
Answer:
chemical weathering
physical weathering
biological weathering
Explanation:
biological weathering it when the plants grow the root move into the rocks to cause break down
If you produce 10 g of water in the reaction from 20 g of O2 what is your percent yield? 2H2+O2>2H2O
Answer:
44.4%
Explanation:
The balanced chemical equation for the reaction is:
2 H₂(g) + O₂(g) → 2 H₂O(g)
According to the equation, 1 mol of O₂ produces 2 moles of water (H₂O). We convert the moles to grams by using the molecular weight (Mw) of each compound:
Mw(O₂) = 2 x 16 g/mol O = 32 g/mol
mass O₂ = 1 mol x 32 g/mol = 32 g O₂
Mw(H₂O) = (2 x 1 g/mol H) + 16 g/mol O = 18 g/mol
mass H₂O = 2 mol x 18 g/mol = 36 g H₂O
Thus, from 32 grams of O₂, 36 g of H₂O are produced (stoichiometric ratio= 36 g H₂O/32 g O₂). We calculate the amount of H₂O that would be produced from 20 grams of O₂ by multiplying the stoichiometric ratio by the mass of O₂, as follows:
36 g H₂O/32 g O₂ x 20 g O₂ = 22.5 g H₂O
The theoretical yield of H₂O is 22.5 g, and the actual amount produced is 10 g. So, we calculate the percent yield as follows:
Percent yield = actual yield/ theoretical yield x 100
= (10 g)/(22.5 g) x 100
= 44.4%
help me please its kinda easy lool
What makes water unique?
In your response be sure to include:
properties of water
dont use go0gle nor guess plz this is due at midnight
Answer:
Water is unique because of our need to survive on something so simple. It is just 2 hydrogen atoms and an oxygen. so simple, but necessary for all of our lives. Just 3-4 minutes without it causes permanent damage
Please help!
Check the element pairings that are likely to react with each other. Refer to the periodic table for assistance
1. Li and Be
2. Rb and Br
3. Fr and Cl
4. Rb and Ca
5. Li and Cl
6. F and Ne
Answer:
Lithium and Beryllium
Rubidium and Bromine
Francium and Chromium
Rubidium and Calcium
Lithium and Chlorine
Fluorine and Neo
Answer:
Rb and Br
Fr and Cl
Li and Cl
Explanation:
What is the chemical name for CO?
Answer:
Carbon monoxide, (CO), a highly toxic, colourless, odourless, flammable gas produced industrially for use in the manufacture of numerous organic and inorganic chemical products; it is also present in the exhaust gases of internal-combustion engines and furnaces as a result of incomplete conversion of carbon or carbon
Explanation:
Answer:
why joy deleting my answer
Explanation:
Using the diagram , what is the intersection of plan ABCD and GC?
Answer:
C
Explanation:
When a line segment and a plane intersect, they intersect at a point. They both coincide on point C
Identify the element that matches this orbital diagram
Answer:
Nitrogen
Explanation:
The electron configuration of nitrogen is:
1s2 2s2 2p3
which satisfies the diagram.
N2 + 3 H2 – 2 NH3 How many moles of nitrogen (N2) are required to get 6
moles of ammonia (NH3)? *
Answer:
N2 + 3H2 → 2NH3. 14 moles a. If 6 mol of H2 are consumed, how many moles of NH3 are produced? ... a 3 mol H₂. 4. How many moles of nitrogen are needed to make 11 moles of NH3? Il mol NH₃ x Imol Na = 15.5
If you have 12 atoms of hydrogen before a chemical reaction, how many atoms of hydrogen will be present
Answer:
12 atoms of hydrogen will be present in the product
Explanation:
12 atoms of hydrogen will be present in the product because the law of conservation of mass states that mass is neither created nor destroyed in chemical reactions.
The law of conservation states that the mass of the element remains the same during the course of the reaction.
The law of reaction conformed by the following:-
Mass of reactant Mass of productAccording to the question, the amount of hydrogen is 12 atoms in the reactant and the amount will remain the same at the end of the reaction, which is a product that is 12 atoms
Hence, the amount remains the same in the reaction that is 12 atoms
For more information, refer to the link:-
brainly.com/question/2817451
Purpose Question:
If you have a headache, which medicine is the best choice to take?
Your choices are Aspirin, Tylenol or Ecotrin (coated aspirin)
Answer:
I will take Aspirin if I had a headache