by what percentage do the transferred electrons change the mass of the penny? (express your result as a positive percentage for an increase, negative for a decrease.)

Answers

Answer 1

The mass of the coin will decrease after the electrons are transferred and it will decrease by a percentage of -

[- (n x 9.1 x 10⁻³¹) / m] x 100 

We have a Penny (Coin) from which some electrons are transferred

We have to determine by what percentage do the transferred electrons change the mass of the penny.

What is Charge?

The sufficiency or deficiency of electrons leads to the development of charge.

According to the question -

Assume the mass of penny when no electrons are transferred is m kg.

Now, suppose you rubbed the coin against your hand and the coin lost some of its electrons. Let this number be n. Now, the mass of electron is 9.1 × [tex]10^{-31}[/tex] kilograms.

The total mass in kilograms lost will be -  

(n x 9.1 × 10⁻³¹) Kg

Therefore - the total mass of coin after loosing electrons will be →

m - (n x 9.1 × 10⁻³¹ ) Kg

There will be decrease in the mass of the penny. The amount of decrease in mass will be → final mass - initial mass =

m - (n x 9.1 × [tex]10^{-31}[/tex]) - m = - (n x 9.1 × [tex]10^{-31}[/tex]).

This negative sign indicates that the mass has decreased.

Hence, the mass of the coin after transferring the electrons will decrease and it will decrease by percentage of →

[- (n x 9.1 x 10⁻³¹)/m] x 100    

To solve more questions on Charge estimation, visit the link below-

https://brainly.com/question/14665768

#SPJ4


Related Questions

we investigated a jet landing on an aircraft carrier. in a later maneuver, the jet comes in for a landing on solid ground with a speed of 87 m/s, and its acceleration can have a maximum magnitude of 8.55 m/s2 as it comes to rest. (a) from the instant the jet touches the runway, what is the minimum time interval needed before it can come to rest? (b) can this jet land on a small tropical island airport where the runway is 0.800 km long? (c) explain your answer.

Answers

For a successful landing the aircraft will need:

(a) A time from the instant the jet touches the runway of: 10.1754 s(b) A distance of: 0.44263 km(c) Due to the jet need just 0.44263 km of distance to landing it can land on a small tropical island airport where the runway is 0.800 km long

The formula for uniformly varied rectilinear motion (UVRM) and procedure we will use to solve this exercise is:

vf = vi + (a * t)x = (vf²-vi²)/ (2a)

Where:

x = distancevf = final velocityvi = initial velocitya = acceleration

Information about the problem:

vf= 0 m/svi = 87 m/sa = -8.55 m/s²t =?x= ?

Applying the final velocity formula, and clearing the time we get:

vf = vi + (a * t)

t = (vf – vi) /a

t = (0 m/s – 87 m/s) /-8.55 m/s²

t = -87 m/s/ -8.55 m/s²

t = 10.1754 s

Applying the distance formula, we get:

x = (vf²-vi²)/ (2a)

x = [(0 m/s)²- (87 m/s)²]/ (2 * -8.55 m/s²)

x = (0 m²/s²- 7569 m²/s²)/ -17.1 m/s²

x =  -7569  m²/s²/ -17.1 m/s²

x = 442.63 m

By converting the distance units form (m) to (km) we have

x = 442.63 m * 1 km/1000 m

x = 0.44263 km

What is acceleration?

It is a physical quantity that indicates the variation of velocity as a function of time, it is expressed in units of distance per time squared e.g.: m/sec2 ; km/h2

Learn more about acceleration at: brainly.com/question/14344386

#SPJ4

the focal length of a thin lens is 40 mm and its aperture diameter is 10 mm. what is the f-number of this lens?

Answers

The f-number is 4

We need to know about f-number to solve this problem. The f-number of an optical system such as a camera lens is the ratio of the system's focal length to the diameter of the entrance pupil . It can be written as

N = f / D

where N is f-number, f is focal length and D is aperture diameter

From the question above, we know that

f = 40 mm

D = 10 mm

By substituting the question above, we know that

N = f / D

N = 40 / 10

N = 4

Hence, the f-number is 4

Find more on f-number at: https://brainly.com/question/17204004

#SPJ4

Which two activities are normally controlled by the northbridge part of the chipset?

Answers

RAM, video card, are the two activities normally controlled by the northbridge part of the chipset.

The Northbridge chipset generally controls access to the RAM, video card, and the speeds at which the CPU can communicate with them. Northbridge is an Intel chipset that communicates with the computer processor and controls interaction with memory, the Peripheral Component Interconnect (PCI) bus, Level 2 cache, and all Accelerated Graphics Port (AGP) activities.

There are two activities that are normally controlled by the Northbridge part of the chipset. These include having access to the RAM and video card. To understand the Northbridge, you must understand part of it is used to be the memory controller chip used to retrieve memory from RAM for the LPU.

To know more about "RAM"

Refer this link:

https://brainly.com/question/27817482

#SPJ4

If the density of water a given temperature and pressure is 1000 kg/m^3, what is the specific volume of the water?

Answers

The specific volume of the water with a density of 1000 kg/m^3 is: 0.001 m^3/kg

The specific volume formula and the procedure we will use is:

v = 1/ρ

Where:

v= specific volumeρ= density

Information about the problem:

ρ= 1000 kg/m^3v= ?

Applying the specific volume formula we get:

v = 1/ρ

v = 1/1000 kg/m^3

v = 0.001 m^3/kg

What is density?

It is a physical quantity that expresses the ratio of the body mass to the volume it occupies.

Learn more about density in: brainly.com/question/1354972

#SPJ4

During a __________ year period starting at about 4.5 billion years ago, bits and pieces of metal-rich particles, rocks, and ices accumulated to form the earth.

Answers

During a 30-10 million year period starting at about 4.5 billion years ago, bits and pieces of metal-rich particles, rocks, and ices accumulated to form the earth.

What is the Earth?

This is referred to as a type of planet which is habitable for different types of life forms. It is also the third planet from the sun and a majority of it contains water such as oceans etc.

Earth was formed billions of years ago through the bits and pieces of metal-rich particles, rocks, and ices which was in a 30-10 million year period which therefore makes it the correct choice.

Read more about Earth here https://brainly.com/question/10715182

#SPJ1

At a distance of 10 km from a point source (isotropic) radio transmitter, the amplitude of the e-field is 0.20 volts/meter. what is the total power emitted by the radio transmitter?

Answers

The total power emitted by the radio transmitter is 6.67×[tex]10^{4}[/tex]W .

What is a transmitter?

The given parameters;

amplitude of the electric field, E = 0.2 V/m

distance of the transmitter, = 10 km = 10,000 m

The intensity of the radio wave from the transmitter is calculated as follows

[tex]I=E^{2}[/tex]/μc

I = [tex]5.305[/tex]×[tex]10^{-5}[/tex] [tex]W/m^{2}[/tex]

The total power emitted by the radio transmitter is calculated as follows;

I= P/A

P= IA

P = 6.67×[tex]10^{4}[/tex]W.

A radio transmitter, often known as a transmitter, is an electronic device used in electronics and telecommunications that uses an antenna to emit radio waves. A radio frequency alternating current is produced by the transmitter and applied to the antenna. The antenna emits radio waves after being stimulated by this alternating current.

All radio-communicating electronic devices, including radio and television broadcasting stations, cell phones, walkie-talkies, wireless computer networks, Bluetooth-enabled gadgets, garage door openers, two-way radios in aircraft, ships, and spacecraft, radar systems, and navigational beacons, require transmitters as essential component parts.

A transmitter could be a standalone electronic device or an electrical circuit housed inside another electronic gadget.  

To learn more about transmitter from the given link:

brainly.com/question/2084370

#SPJ4

A mass attached to a spring is displaced from its equilibrium position by 5cm and released. The system then oscillates in simple harmonic motion with a period of 1s. If that same mass–spring system is displaced from equilibrium by 10cm instead, what will its period be in this case?.

Answers

The period of the pendulum is √2 seconds.

We need to know about pendulum experiments to solve this problem. The pendulum is a simple experiment to calculate gravitational acceleration. The gravitational acceleration can be calculated by

g = 4π² . L / T²

where g is gravitational acceleration, L is the length of the string and T is the period.

From the question above, we know that:

T1 = 1 s

L1 = 5 cm

L2 = 10 cm

By using proportionality, the squared period is proportional to the length. Hence,

T² ~ L

Using the ratio, we can write

T1² / T2² = L1 / L2

1² / T2² = 5 / 10

1 / T2² = 1 / 2

T2² = 2

T2 = √2 second

Find more on pendulum at: https://brainly.com/question/26524032

#SPJ4

identify the conditions under which a given system of forces can be reduced to a single force. (check all that apply.)

Answers

The condition under which a system of forces is reduced to a single force is - One can replace the force - couple system at O by a single force R acting along a new line of action if R and vector M₀ are mutually perpendicular.

What is a force?

A force is a push or a pull on an object and it is a vector quantity.Therefore, it has both direction and magnitude.Force can cause a change in the velocity of an object.Friction is created because of the force.The formula of force is a product of mass and acceleration.

Hence, the only condition is if R and vector M₀ are mutually perpendicular, then the system of forces can be reduced to a single force.

To learn more about force, visit: https://brainly.com/question/17646386

#SPJ4

Determine the average speed in m/s of a hockey puck that takes 15 seconds to move 90.0 meters.

Answers

Explanation:

average speed= total distance/total time

=90÷15

=6

alex goes cruising on his dirt bike. he rides 700 m north, 300 m east, 400 m north, 600 m west, 1200 m south 300 m east and finally 100 m north. what distance did he cover? what was his displacement? (use 1cm

Answers

He started from point O . After traveled he reached at the same point O.

from the graph given which is attatched :

OA = 700m ab = 300 m bc = 400m

CD = 600m DE = 1200m EF = 300m and FO = 100m

total distance covered =  700+ 300 + 400 + 600 + 1200 + 300 + 100

= 3600m

hence he covered 3600m distance

since, he started from point O and after travelled he reaches the same point from where he started means the initial and final position is same

therefore the total displacement is zero

displacement = 0

To know more about  displacement     visit : https://brainly.com/question/11934397

#SPJ4

WILL GIVE BRAINLIEST

When you remove energy in a phase change what what happens to the kinetic energy?

Give and example of this type of phase change

explain the kinetic energy change from one phase to the other using movement of the molecules

Answers

Answer: chicken nuggy

Explanation:

because chicken muggy

The resolution of radio telescopes suffers greatly from the large wavelengths of the light they are observing. What can be done to a radio telescope to improve its angular resolution?.

Answers

make its dish bigger to improve its angular resolution

Because the wavelengths of radio waves are so larger than the wavelengths of visible light, radio telescopes must be much larger than optical telescopes. The wavelengths of radio waves range from 3 km to 1 cm, while the wavelengths of visible light range from 4 x 10-7 m (ultraviolet) to 7 x 10-7 m. (red). The degree of detail that can be observed in an area of the sky is measured in terms of angular resolution. More detail can be seen at a given wavelength with a larger telescope. The wavelength of the light or radio waves being observed by the telescope (λ) and the telescope's diameter (D) can be used to compute the angular resolution (θ) of the telescope.

θ = 2.5 × 105 × λ/D

θ = 1.22 × λ/D

The ability of any image-forming tool, such as a optical or radio telescope, a microscope, a camera, or an eye, to differentiate minute features of an object is known as angular resolution, and as such, it is a key factor in determining picture resolution. It is utilized in the application of acoustics to sound waves, antenna theory to radio waves, and optics to light waves.

To know more about angular resolution refer to https://brainly.com/question/13097287

#SPJ4

Compare your power output both climbing and running up the stair way to a 60- wattslight bulb?

Answers

Running up the flight of stairs produces more horsepower than strolling up them does. because running causes you to go through energy more quickly.

Work (in joules) equals your weight (in newtons) times the staircase's height (in meters.) The power you now possess is equal to the sum of the labor you completed and the time it took, or: Work (in joules) divided by time equals power (in watts) (in seconds.) The college alumnus questionnaire's physical activity index (PAI) is calculated on the basis of the assumption that every 20 steps is equivalent to 8 kcal of energy expenditure. This amount equates to a 0.40 kcal energy cost. You put in the same amount of effort as your potential energy changes.

Learn more about work here-

https://brainly.com/question/18094932

#SPJ4

Newton’s second law relates an object’s acceleration to its mass and the net force acting on it. Does newton’s second law apply to a situation in which there is no net force? select the best explanation.

Answers

No, the statement does not justify the situation because when the Net Force is 0 then it means that Inertia is greater than Force. So, it follows Newton's first law of Motion

The first law of motion which is often referred to as the 'Law of Inertia' states that an object tends to remain in the motion it's set in. If the object is set in motion it'll tend to be in motion or if the object is at rest then it'll tend to stay at rest. The object will only change its position when an external force is applied to it.

This tendency to remain in its state of motion is called 'Inertia' which acts as a resistance force when an external force is applied. If the magnitude of the external force is less than the Inertia object will not change its state of motion. So when the net force applied to an object is 0 the object will follow the Law of Inertia.

To know more about the Law of Inertia, Click here :

https://brainly.com/question/15314757

#SPJ4

a boy is to catch a ball which drops vertically from the top of a 14.9-m tower. find the average velocity at which the boy, initially 6.62 m from the base of the tower,

Answers

The velocity of the boy in order to catch the ball is 3.8 m/s.

Time of motion of the ball

The time taken for the for the ball to fall from the given tower is calculated as follows;

t = √(2h/g)

where;

h is the height of fall of the ballg is acceleration due to gravity

t = √(2 x 14.9 / 9.8)

t = 1.74 seconds

Velocity of the boy

The velocity of the boy in order to catch the ball is calculated as follows;

x = Vxt

Vx = x/t

Vx = 6.62 m / 1.74 s

Vx = 3.8 m/s

Thus, the velocity of the boy in order to catch the ball is 3.8 m/s.

Learn more about velocity here: https://brainly.com/question/25749514

#SPJ4

Can you someone me I’m stuck on this question

Answers

Velocity

Speed is a description of how fast an object moves; velocity is how fast and in what direction it moves. In physics, velocity is speed in a given direction. When we say a car travels at 60 km/h, we are specifying its speed. When we say a car moves at 60 km/h to the north, we are specifying its velocity.

A system gains 747 kj of heat, resulting in a change in internal energy of the system equal to 176 kj. how much work is done? = kj

Answers

A system gains 747 kJ of heat, resulting in a change in internal energy of the system equal to 176 kJ, here -571 kJ of work has been done.

Explanation

Using the  First law of thermodynamics

ΔU = q + w

Here Change in internal energy ΔU = 176 kJ

And Heat gained by the system (q) = 747 kJ

With Work done being w

So, apply the formula in the given information we get

176 kJ = 747 + w

w = 176  - 747 kJ

    = -571 kJ

Here, the negative symbol denotes that the work has been done.

What is thermodynamics?

The study of how heat and other types of energy interact is the subject of the physics field known as thermodynamics. The effects of thermal energy on matter are specifically discussed, as well as how thermal energy is changed into and out of other types of energy.

Learn more about thermodynamics

https://brainly.com/question/18056998

#SPJ4

rolls of foil are 304 mm wide and 0.020 mm thick. (the density of foil is 2.7 g/cm3 .) what maximum length of foil can be made from 1.09 kg of foil?

Answers

The maximum length of foil will be 6639.8635 cm or 66.3986 m

To find the maximum length of the foil, the given datas are:

Width of roll of foil = 304 mm

Height or thickness = 0.020 mm

Density of foil = 2.7 g/cm³

Mass of foil = 1.09 Kg

What is Density?

Density is the substance's  mass per unit volume. It can be also described by measuring how the particles in the substances tightly packed together.

d = m/ v

v = length (l) × width (w) × height (h)

First of we will convert the Kg into gram and mm into cm.

For 1 Kg = 1000 g

1.09 × 1000 = 1090 g

For 1 cm = 10 mm

304 / 10 = 30.4 cm

0.020 / 10 =  0.0020 cm

Now we will put the values in formula:

d = m/ l× h× w

l = m / d × h× w

l = 1090 g / 2.7 g/cm³× 30.4 cm × 0.0020 cm

l = 1090 g/ 0.16416 g/cm

l = 6639.8635 cm or 66.3986 m

The maximum length of foil will be 6639.8635 cm or 66.3986 m

Learn more about the density,

https://brainly.com/question/15164682

#SPJ4

(i) when vs 10 v with the switch on, what is the total charge q transported through rl in 2.5 seconds? (ii) when vs 15 v with the switch on, what is the energy w required to transport 0.5 (c) of charge through rl?

Answers

(i) when vs 10 v with the switch on, what is the total charge q transported through rl in 2.5 seconds?

(ii) when vs 15 v with the switch on, what is the energy w required to transport 0.5

The is 7.5 Joule.

The unit of energy in line with the metric device of devices (SI) is said to be the joule (J).

similarly, power is expressed non a extensive style of other SI-incompatible units. energy, ergs, kilowatt-hours, kilocalories, and British Thermal gadgets are some of these gadgets.

(i) v_s = 10 v when switch ON

q_0=0 [when switch off]

q=q_0+∫0-t i(t)dt

q=∫0-t=2.5sec i(t)dt

q= ∫0-t=sec 1mAdt

q=1×10^-3[t]0 - 2.5 sec

q=1×10^-3[2.5]

q=2.5×10^-3

q=2.5mC

(ii)

i=15/10=1.5mA

w=vit

q=0.5 column

q=q_0-0+∫0-t i(t)dt

q=∫ 0-t 1.5mAdt

q= 1.5×10^-3t

0.5= 1.5×10^-3t

t=0.5/ 1.5×10^-3t=(0.5/1.5)×10^3t

t=0.3333×10^3=333.3 second

w=vit

=15×1.5×10^3×0.3333×10^3

w=15×1.5×0.3333

w=7.49925

w=7.5 Joule

To learn more about energy refer the link:

https://brainly.com/question/14310506

#SPJ9

four point charges, each of magnitude 9.66 µc, are placed at the corners of a square 87.1 cm on a side. if three of the charges are positive and one is negative, find the magnitude of the force experienced by the negative charge. the value of coulomb’s constant is 8.98755 × 109 n · m2 /c 2 .

Answers

The magnitude of the force experienced by the negative charge is 0.198N.

The Coulombs law is an expression that states that  magnitude of the force between two charges q and Q separated by a distance r is given by

F=k|Q|q|r2

where k is Coulomb constant.

Answer and Explanation:

Let us visualize corners of the square as four points on the xy-axis. The four points would be origin (0,0), then (78.9 cm, 0), then (0, 78.9 cm) and (78.9 cm, 78.9 cm). These points are corners of the square described in the question. Let  negative charge be at origin. Let charge 1 be located at (78.9 cm, 0), that is, its located along x-axis, a distance 78.9 cm away from the negative charge. The force due to this charge 1 acts in positive x-direction as the two charges attract. Let charge 2 be at point (0, 78.9 cm) and the force due to this charge acts in the positive y-direction. Charge 2 is also 78.9 cm away from negative charge. Let charge 3 be located at point (78.9 cm, 78.9 cm). Force due to this charge has the x and y-components. The angle this force makes with positive x-axis is 45 degrees since this is a square. The distance between charge 3 and negative charge is

√(78.9cm)2+(78.9 cm)2 =111.5814501cm.

Now we can calculate force on the negative charge due to each individual positive charge. Force due to the charge 1 is [tex]F_{1} =k|+q||-q| r^{2}(8.98755*109N.m^{2}/C^{2})*(2.68*106)*(2.68*106)^{2}(0.789m)^{2} =0.1036947816N[/tex]

in positive x-direction. Force due to the charge 2 has same magnitude as force due to charge 1, but acts in the positive y-direction.

F2 =0.1036947816N

The force due to the charge 3 is

[tex]F_{3}=k|+q||-q| r^{2} =(8.98755*109N.m^{2}/C^{2})*2.68*10^{-6} )^{2}(1.115814501m)^{2}= 0.05184739076N[/tex]

The x and y-components of force due to charge 3 are

F3,x=F3cos45=(0.05184739076√22)N=0.03666164159N

in positive x-direction, and

F3,y=F3sin45=(0.05184739076√22)N=0.03666164159N

in positive y-direction.

Therefore, x-component of the resultant force experienced by the negative charge is

Fx=F1+F3,x=0.1036947816N+0.03666164159N=0.1403564232N

and y-component is

Fy=F2+F3,y=0.1036947816N+0.03666164159N=0.1403564232N

Therefore, magnitude of the force experienced by the negative charge is

[tex]F= \sqrt{Fx_{2}+F_{2y} }= \sqrt{(0.1403564232N)^{2}+(0.140356432N)^{2} } =0.198493973N[/tex] =0.198N

correct to the three significant figures.

To know more about force visit: https://brainly.com/question/13191643

#SPJ4

If membrane potential is greater than equilibrium potential, then driving force is __

Answers

Then driving force for the membrane is hyperpolarized.

What is equilibrium potential?

The electrical potential difference across the cell membrane that exactly balances the ion concentration gradient is known as the equilibrium potential. Since the system is in equilibrium, the membrane potential will normally stay at the equilibrium potential.

Additionally, the equilibrium potential for a group of ions in a membrane provides us with a baseline for how this membrane is operating or behaving in a given situation where it is not at rest.

to learn more about equilibrium potential go to -

https://brainly.com/question/28304088

#SPJ4

shot from a cannon in 1998, david "cannonball" smith set the distance record for being shot from a cannon (56.64 m). during a launch in the cannon’s barrel, his speed increased from zero to 80 km/h in 0.40 s. while he was being stopped by the catching net, his speed decreased from 80 km/h to zero with an average acceleration of 180 m/s2m/s2. what can you determine about smith’s flight using this information?

Answers

The final velocity of the cannon camera is 22m/s

We are informed in this query that David will launch from a journey at his final speed. Consequently, it is 80 kilometers per hour. Therefore, we must convert. Listen at a 2 m/s rate. In order to convert our number of 80 into units, we must multiply it by the number of meters in a club. As a result, his final velocity equals 22.2.

a= v/ t = 56m/sec square dec acceleration = 80km/h converting into final velocity m /s sec its 22.2m/s

To learn more about velocity:

https://brainly.com/question/18084516

#SPJ4

-50 1/2 + 12.3
What's answer

Answers

Answer:

-12.7

Explanation:

Answer: -38.2

Explanation: -50 1/2 + 10 = -40 1/2 + 2 = 38 1/2 + 0.3 = 38.2

You run around neyland stadium. when you are halfway around the stadium, which value cannot be 0?
a) instantaneous speed
b) average speed
c) instantaneous acceleration
d) average acceleration

Answers

When you are halfway around the stadium, average speed value cannot be 0.

Average speed = Total distance travelled / Time taken.

Since you ran halfway across the stadium, a certain amount of distance has been covered. The only way the average speed can be zero is if you remained stationary over a given interval of time.

In a distance-time graph, at the halfway point in the stadium, slope is equal to zero. So, Instantaneous speed is zero. In a Velocity-time graph, at the halfway point in the stadium, slope is equal to zero. So, Instantaneous acceleration is zero. In a Velocity ( w.r.t. time )-time graph, at the halfway point in the stadium, slope is equal to zero. So, Average acceleration is zero.

Therefore, when you are halfway around the stadium, average speed value cannot be 0.

To know more about average speed

https://brainly.com/question/12322912

#SPJ4

which low-energy state of condensed matter is characterized by structural rigidity and resistance to changes of shape or volume? gas

Answers

The low-energy state of condensed matter is characterized by structural rigidity and resistance to changes of shape or volume is solid.

Solids are made from the least energetic debris, which vibrate desk bound. As a end result, a solid acquires properties like a awesome form and quantity.

A substance's frozen kingdom of rely is what's called a solid. It is not important for a substance to freeze at a low temperature. as an instance, the tap at your chemistry lab station and the faucets in your property are each product of frozen chrome steel, as are your desk, pencils, pens, cell telephones, and computers. something is solid is frozen.

The molecules of count are more stiff and move less when it's miles in its stable state.

moreover, they are greater immune to shape changes. imagine ice, that's water in its strong kingdom. Ice is a ways extra strong in its structure than liquid water, making it greater hard to shape-alternate.

To learn more about condensed matter refer the link:
https://brainly.com/question/1447093

#SPJ4

A catapult can project a projectile at a speed as high as 37.0 m/s. If air resistance can be ignored, how high (in m) would a projectile launched at this speed rise if projected straight up?

Answers

The height of the projectile is 69.7 meters when air resistance can be ignored.

The initial speed (u) of the projectile is = 37 m/s

The final speed (v) is 0 because, at a high point, the projectiles come at the rest condition.

The acceleration is negative when the project is thrown in an upward direction. Therefore, the acceleration is, a = -g

Or, a = -9.81 m/s²

Now, by using the kinematics equation, we can find the height of the projectile.

v² = u² + 2gh

(0 m/s)² = (37 m/s)² + 2(-9.81 m/s²)h

2(9.81 m/s²)h = (37 m/s)²

Or, h =  (37 m/s)²/ 2(9.81 m/s²)

Or, h = 69.7 m

Therefore, the height of the projectile is 69.7 meters.

To learn more about projectile, visit: https://brainly.com/question/14409464

#SPJ4

Let v = (2, 3, 1), w = (1, 1, 1), and 3u 2v 4w = (1, 2, 3). find (a) the vector u (b) the linear combination: 2u 3v 5w.

Answers

The vector of linear combination = u is -7/3 i - 8/3 j - k , a) linear combination is xi + yj + zk = (1/3) (-7i -8j-3k) b ) linear combination is 19/3 i + 17/3 j + 6 k

The vector u is  [tex]-7/3[/tex] i - [tex]8/3[/tex] j - k.

The linear combination 2u + 3v + 5w  is 19/3 i + 17/3 j + 6k.

in line with the posed question.

v = (2, 3, 1)

w = (1, 1, 1)

And

3u + 2v + 4w = (1, 2, 3)

From,

v = (2, 3, 1)⇒ v = 2i + 3j + 1k

w = (1, 1, 1)⇒ w = I + j + j

Evaluation :

a). Let u be the vector xi + yj + zk.

Here,

3u + 2v + 4w = (1, 2, 3)

I + 2j + 3k = 3u + 2v + 4w

I + 2j + 3k = 3(xi + yj + zk) + 2(2i + 3j + k) + 4(i + j + k)

I + 2j + 3k = 3xi + 3yj + 3zk + 4i + 6j + 2k + 4i + 4j + 4k

I + 2j + 3k = 3xi + 3yj + 3zk + 8i + 10j + 6k

I + 2j + 3k - 8i -10j -6k = 3xi + 3yj + 3zk

-7i -8j -3k = 3xi + 3yj + 3zk

xi + yj + zk = (1/3) (-7i -8j-3k)

b). The linear combination

2u + 3v + 5w

= 2(-7/3i -8/3j - k ) + 3(2i + 3j + k) + 5(i + j + k)

= -14/3 i -16/3j -2k + 6i + 6j + 3k + 5i + 5j + 5k

= -14/3 i -16/3j -2k  + 11i + 11j + 8k

= 19/3 i + 17/3 j + 6k

What is a linear combination of a vector?

A linear combination is  of two or more vectors in which the vector obtained by adding two or more vectors (with different directions) which are then  multiplied by scalar values.

To learn more vector and linear combination about from the given link:

brainly.com/question/12505220

#SPJ4

A+tennis+ball+bounces+on+the+floor+three+times.+if+each+time+it+loses+22%+of+its+energy+due+to+heating,+how+high+does+it+rise+after+the+third+bounce,+provided+we+released+it+3.1+m+from+the+floor?

Answers

If a tennis ball bounces on the floor three times. if each time it loses 22% of its energy due to heating, the height it will rise after the third bounce, provided we released it 3.1 m from the floor is 1.4725 m.

What is energy loss due to heating?

The deliberate or accidental transfer of heat from one material to another is known as heat loss. Radiation, convection, and conduction can all contribute to this. When a component comes in direct touch with another component, whether it is insulated or not, conduction frequently happens. When a pipe, electric heater, or other component has an air barrier surrounding it, convection occurs. When there is no touch and heat is transmitted as waves, radiation results.

given,    

Height = 3.1 m

Energy loss = 22%                                                      

                                                     

Let, the total energy be equal to 1 unit                                

Balance of energy after first collision = 0.78  x 1 unit

                                                            = 0.78 unit

Balance after second collision = 0.78 ^2 unit

                                                  = 0.6084 unit

Balance after third collision = 0.78 ^3 unit

                                             = 0.475 unit

Height achieved by the third collision will be equal to energy remained                                        

H be the height achieved after 3 collision

0.475 ( m g h) = m g H                  

H = 0.475 x h                                    

H = 0.475 x 3.1 m                          

H = 1.4725 m    

Therefore,  

It will rise up to 1.4725 m after the third bounce.

Complete Question

A tennis ball bounces on the floor three times. if each time it loses 22% of its energy due to heating, how high does it rise after the third bounce, provided we released it 3.1 m from the floor?

To know more about energy loss due to heating, go to URL

https://brainly.com/question/10151995

#SPJ4

What do you observe when you switch on your light source and hold your largest plastic shopping bag square between the light source and the wall?

Answers

When we set the object adjacent to the flashlight and not exactly into its beam of light, we probably won't initially notice a shadow.

However, if we place the object directly in the path, we should be able to see a shadow of it on the wall.

What is shadow?

A shadow, or black place, is produced whilst an opaque item deflects light from a mild source. at the back of a light-emitting gadget, it fills the whole three-dimensional area. A 2-D backward projection of the object obstructing the mild may be used to conceptualise the cross section of a shadow.

mild goes in a directly line, therefore setting an object subsequent to a flashlight however out of the mild's direct route prevents us from seeing a shadow. because the object became out of the mild's direct direction, it was not able to block the light from the flashlight's source.

To learn more about shadow refer the link:

https://brainly.com/question/922673

#SPJ4

Recoil is noticeable if we throw a heavy ball while standing on roller skates. If instead we go through the motions of throwing the ball but hold onto it, our net recoil will be?.

Answers

Answer:

zero

Explanation:

Other Questions
Supposed you lived on the sun, would you see the moon going through phases as it orbits the earth? equivalent expression to 2x7 + 2x3 Katie invested a total of $8000 part at 5% simple interest in part at 6% simple interest. at the end of one year the investments had earned $454 interest. how much was invested at each rate? what are 5 resources valued by human society? Populism, as a feature of american cultural life, is best described as? a gas at 20c may be considered rarefied, deviating from the continuum concept, when it contains less than 102 molecules per cubic millimeter. if avogadro's num ber is 6.023 x 102 molecules per mole, what absolute pressure (in pa) for air does this represent? If player 1 plays strategy x and player 2 plays strategy c, what is player 2's payoff? player 1 player 2 a b c x 9, 8 10, 12 3, 15 y 5, 6 12, 20 4, 10 z 10, 9 13, 4 8, 12 a. 10 b. 15 c. 3 d. 12 A physical model is often used to show the complex structures that exist inmany cells. Which sentence best describes a benefit of using a model of acell? Observation is best suited for ________ research. constructive descriptive exploratory survey experimental What signs and symptoms does the nurse expect a client diagnosed with bacterial pneumonia to exhibit? If rebecca chooses not to share her history of childhood abuse with friends, in which area of rebecca's johari window would that information be located? HELPPPPP ME WITH THIS PLEASE!!!all genetic characteristics are not inherited. how can this be explained? which of the following statements describe the terms democracy and republic as understood by the framers of the constitution? which molecules are considered organic? those containing hydrogen those containing carbon all natural those containing phosphorus in northern crete, mixed deposits of volcanic ash, cultural material, and marine fossils near the beach are very similar to those found in coastal regions after: the current us debt as of 8/17/22 was approximately $30.6 trillion. calculate how far a stack of dollar bills in this amount would reach in miles. The journal entry to recognize depreciation expense for office equipment would include a? the nec requires that when a suspended ceiling grid is used to support lay-in type lighting fixtures, . 1. Summarize the preliminary work one should do prior to reading a play What are the possible limitations of the decision support system in a banking sector with examples and scenarios