Answer:
ion know tbh
Explanation:
Low air pressure and warm temperatures over land are most likely to result in which of the following weather conditions or events?
A.Clear sunny skies
B. tropical hurricane
C. chance of snow
D.Cloudy skies with rain
A 4 kg particle moves at a constant speed of 2.5 m/s around acircle of radius 2 m. What is its angular momentum about the center of the circle? Answerin units of kg · m2/s. What is its moment of inertia about an axis through the center ofthe circle and perpendicular to the plane of the motion? Answer inunits of kg · m2. What is t
Explanation:
Given that,
Mass of the particle, m = 4 kg
Speed of the particle, v = 2.5 m/s
The radius of the circle, r = 2 m
We need to find the angular momentum about the center of the circle. The formula for the angular momentum is given by :
[tex]L=mvr[/tex]
Substitute all the values,
[tex]L=4\times 2.5\times 2\\\\L=20\ kg{\cdot}m^2s[/tex]
So, the angular momentum of the particle is 20 kg-m² s.
What number belongs where "X" is to properly balance this equation?
2 NaCl →
2 Na + Ecl2
04
o
2.
оо
Answer:
Option D: 1
Explanation:
The chemical equation given is;
2NaCl = 2Na + XCl2
We want to find the value of X.
On the left hand side, we can see we have 2 moles of both Na and Cl.
On the right hand side, we can see that we have 2 moles of Na and also 2 moles of Cl. Thus, the equation is balanced and as such X = 1
What is Compression?
Answer:
Compression, decrease in volume of any object or substance resulting from applied stress. Compression may be undergone by solids, liquids, and gases and by living systems.
Explanation:
| Britannicahttps://www.britannica.com
All of the following are characteristics of a laser diode except
Answer:
D
Explanation:
Given that all of the following are characteristics of a laser diode except
Solution.
A laser diode emit light of a single colour. That is, it emits a monochromatic light in which the light emitted monochromatically will definitely be coherent. That is, a light with a single wavelength emitted by a wide wavelength.
Also, all diode have positive and negative junction which is known as pn junction.
The incorrect among all the options is option D which is the answer.
Question 3 of 15
Which process is often used to determine what coefficients to use to balance
an equation?
A. Trial and error
B. Neutral numbers
C. Roundabout
D. Lavoisier's
Help?
Answer:
A. Trial and error
Explanation:
Trial and error method is a method adopted when trying to solve a quadratic equation. This equation is mostly the balancing of the right hand side and the left hand side in-order to form a unique point or to equate to zero when one is subtracted from the other. In trail and error method, the coefficients is used to determine when the actual equation is balanced and the likely answer it should be if the equation is expanded through multiplication method.
1 ) when a ball is projected upwords its time of rising is ...............the time of falling .
a) greater than b) smaller than c) equal to d ) double
2 ) when an object falls freely under the effect of gravity , the distance moved is
a ) directly proportional to time
b ) inversely proportional to time
c ) directly proportional to square of time
d ) inversely proportional to square of time.
Answer:
correct answer is C
Explanation:
In this exercise, you are asked to complete the sentences so that the sentence makes sense.
1) in projectile launching, the only force that acts is gravity in the vertical direction, so the time of going up is EQUAL to the time of going down
correct answer C
2) when a body falls freely, the acceleration is the ratio of gravity, therefore if it starts from rest, its height is
y = v₀ t - ½ gt²
v₀ = 0
y = -1/2 g t²
so the position is not proportional to the square of the time
correct answer is C
Calculate the volume occupied by a glass cup having a mass of 260 g knowing that the
density of glass is equal to 2.6 g/cm3
Answer:
100 milliliters
Explanation:
A block of wood and a block of aluminum have been sitting out for a while. How do their temperatures compare?
Answer:
Block of aluminum
Explanation:
The block of aluminum because of the conductivity, and is a metal, so it gets hotter faster
The temperature of wood and the aluminium will depend upon thier thermal coductivity.
What is thermsal conductivity?The thermal conductivity of any material is defined as the amount of heat from a material can flow in a unit area per unit degree centigrade for a unit distance.
The thermal conductivity of wood is around 0.90 to 0.197 w/mk and that of aluminium is around 88 to 251 w/mk.
We can see that the aluminium block will absorb much amount of heat as compared to the wood block. Because the thermal conductivity of aluminium is much higher then the wood.
Hence temperature of wood and the aluminium will depend upon thier thermal coductivity.
To know more about Thermal conductivity follow
https://brainly.com/question/11213835
a particle moves along of the x_axis according to the equation X=2t+3t^2, whare x is in m and t is in second. calcualt the instantaneous velocity and the instantaneous acceleration in t=3s
Answer:
Instantaneous velocity [tex]= 20[/tex] meter per second
Instantaneous acceleration [tex]= 6[/tex] meter per second square
Explanation:
Given equation of distance X = [tex]2t+3t^2[/tex]
Instantaneous velocity [tex]= \frac{dX}{dt}[/tex] [tex]= 2 + 6 t[/tex]
Substituting the value of t = 3 seconds, we get -
[tex]\frac{dX}{dt} = 2 + 6*3 = 20[/tex] meter per second
Instantaneous acceleration [tex]= \frac{d^2X}{dt^2}[/tex] [tex]= 6[/tex] meter per second square
Make a claim about which fossil in the diagram is the oldest. Use evidence and scientific reasoning to support your claim.
From the diagram, the fossil of fish is considered the oldest fossil. Because the oldest fossils are formed at the bottom whereas the others are at the top of the soil.
What are the fossils?When living organisms like plants, animals, and human beings are died, their bodies get buried in the form of sediments in the sand, rock water bodies, etc..,
It also includes the preserved remains of life for more than 10,000 years. It is the preserved remains, sediments, and impressions to trace the life of the organisms and their behavior.
When living organisms died and are buried in sand or mud, the tissues of living organisms get decomposed leaving the bones which is harder. After the organisms are buried in the sand or mud, several sediments, and sand was built over the top of the buried organisms.
These sand and sediments over the buried organisms eventually form the layer of rocks. This is how fossils are made and these fossils were identified when the rocks were broken or by cause of soil erosion.
The age of the fossils was identified by the stacks of layered rocks with the help of the superposition principle. The oldest fossils are present at the bottom of the rocks whereas the youngest fossils are present at the top of the rocks. This process is called Relative dating.
Hence, from the given diagram the fossil of fish is present at the bottom of the rock unlike the others fossils like monkeys and lizard. Thus, the oldest fossil is fish and the youngest one is a monkey.
To learn more about the Fossils:
https://brainly.com/question/31419516
#SPJ2
g n diffraction, the formula for minima is given by a times s i n (theta )equals m lambda, where a is the width of the slit, theta is the angle of dispersion, m is the order, and lambda is the wavelength. For a wavelength of 630 nm, m equals 3, and a equals 5 times 10 to the power of negative 6 end exponent m. Calculate the angular spread in Degrees. Enter only the numerical value (i.e. omit the unit abbreviations when inputting your answer into Blackboard).
Answer:
θ = 22.2
Explanation:
This is a diffraction exercise
a sin θ = m λ
The extension of the third zero is requested (m = 3)
They indicate the wavelength λ = 630 nm = 630 10⁻⁹ m and the width of the slit a = 5 10⁻⁶ m
sin θ = m λ / a
sin θ = 3 630 10⁻⁹ / 5 10⁻⁶
sin θ = 3.78 10⁻¹ = 0.378
θ = sin⁻¹ 0.378
to better see the result let's find the angle in radians
θ = 0.3876 rad
let's reduce to degrees
θ = 0.3876 rad (180º /π rad)
θ = 22.2º
In a laser cutting process of aluminum plates of 1mm thick, a through hole is to be drilled, followed by melting-dominated cutting. If the focused laser beam is 0.25 mm in diameter (assuming it is the same of the cut width w), (a) In order to drill a hole through the plate in 1 ms, determine the laser power required. (b) In the cutting, the laser power is adjusted to be 1,500W. Determine the cutting velocity V achievable.
Answer:
a) P = 118.4 W, b) t = 7.9 10⁻⁵ s
Explanation:
a) Let's analyze this interesting exercise a bit, we suppose that all the laser
energy is used to heat the aluminum, we should calculate the energy necessary to bring the solid aluminum to the melting temperature and add the energy to carry out the change of solid state to liquid,
let's use the calorimeter equation
Q₁ = m c_e ΔT
and the energy of change of these solid to liquid (fusion process)
Q₂ = m L
the energy required to create the hole is
Q_ {total} = Q₁ + Q₂
if there are no losses this is the laser energy
E = Q_ {total}
The aluminun data c_e =9000 J/kgC, L = 322 103 J/kg, ρ = 2.7 103 kg/m3 , T₂ = 660C, T₀= 25C
Let's find the mass of the hole, which we approximate by a cylinder of diameter d = 0.25 mm = 0.25 10⁻³ m and a thickness of e = 1 mm = 1 10⁻³ m
let's use the concept of density
ρ = m / V
the volume of a cylinder is
V = π r² e = π (d²/4) e
we substitute
m = [tex]\rho \pi \frac{d^2 e}{4}[/tex]
let's calculate
m = π/4 2.7 10³ (0.25 10⁻³)² 1 10⁻³
m = 1,325 10⁻⁷ kg
we calculate the energy
E = 1,325 10⁻⁷ 900 (660 - 25) + 1,325 10⁻⁷ 322 10³
E = 7.57 10⁻² + 4.27 10⁻²
E = 1.184 10⁻¹ J
Let's use the power ratio
P = E / t
P = 0.1184 /1 10⁻³
P = 118.4 W
b) In this part they indicate that the laser power is P = 1500 W, find the time to deposit the energy to melt the aluminum
P = E / t
t = E / P
t = 0.1184 / 1500
t = 7.9 10⁻⁵ s
A student is provided with a rubber cylinder and a patch of synthetic fur. The rubber cylinder and the patch are electrically neutral. The student rubs the cylinder back and forth along the fur. A short time later, after the cylinder and fur have been placed on insulating stands, the student determines that the fur has a net negative electric charge. Before the patch of fur attained its net negative charge, it was considered to be electrically neutral. Which of the following claims, with appropriate evidence, is correct about the distribution of charge in the patch of fur before the charging process?
a. It is an isolated system.
b. It is a closed system.
c. It is an open system.
d. The type of system cannot be determined unless information is known about the net force exerted on the system at any given time.
Answer:
Option b ( It is a closed system) is the appropriate answer.
Explanation:
The mass transfer isn't made on a platform. There seems to be no mass transfer, the mechanism can't be separated as power lines will interfere beyond the physical boundaries including its fur patch.The mechanism can't however be separated and, while the mass transfer is indeed not present, several field lines will communicate well outside the mechanism.The other options are not linked to the situation in question. Thus, the answer is correct.
!Please help fast!!*18 pts*!
How is light amplified in a laser?
A. Photons "leak" through a partically reflecting mirror, causing them to travel in step.
B. Integrated circuits in a laser amplify the sound produced by photon emission.
C. Photons collide with gas particles, multiply, and reflect back and forth in a tube.
D. Electric current is amplified and directed into gas particles, which emit photons.
Answer:
A.
Explanation:
Some of these photons are absorbed by the atoms in the ground state and the photons are lost to the laser process. However, some photons cause stimulated emission in excited-state atoms, releasing another coherent photon. In effect, this results in optical amplification
a car is travelling at 18m/s accelerates ti 30m/s in 3seconds. what's the acceleration of the car
[tex] \Large {\underline { \sf {Required \; Solution :}}}[/tex]
We have ―
Initial velocity, u = 18 m/sFinal velocity, v = 30 m/sTime taken, t = 3 secondsWe've been asked to calculate acceleration.
[tex]\qquad \implies\boxed{\red{\sf{ a = \dfrac{v-u}{t} }}}\\[/tex]
a denotes accelerationv denotes final velocityu denotes initial velocityt denotes time[tex] \twoheadrightarrow \quad \sf {a = \dfrac{30-18}{3} \; ms^{-2} } \\ [/tex]
[tex] \twoheadrightarrow \quad \sf {a =\cancel{ \dfrac{12}{3} \; ms^{-2} }} \\ [/tex]
[tex]\twoheadrightarrow \quad \boxed{\red{\sf{ a = 4 \; ms^{-2} }}}\\[/tex]
Therefore, acceleration of the car is 4 m/s².
There is only one temperature where the Celsius and Fahrenheit thermometers will read the same and no conversions need to be made. What is it?
A. -25 degrees
B. -40 degrees
C. 25 degrees
D. 0 degrees
Answer:
-40 degrees
Explanation:
I just took the Temperature Quiz and got it right. :)
a violin is less than 0.5 m long. a bass fiddle is more than 1.5 m long. which instrument do you expect to be able to play notes with a lower pitch and why?
Explanation:
When there is a high frequency sound the speed of the vibrations is faster and makes a high pitch sound. When there is a low frequency sound the speed of the vibrations is slower and makes a lower pitch sound.
Find the velocity of an object that has a mass of 500x10-6 kg and a charge of 1pc if it starts from
rest and passes through a potential difference of 120kV
Answer:
v = 4.8 10⁻⁴ m / s
Explanation:
To solve this exercise we can use the concepts of energy. In this case the potential energy is transformed into kinetic energy
U = K
q V = ½ m v²
v = [tex]\sqrt { \frac{2qV}{m} }[/tex]
in the exercise they indicate the value of the charge q₁ = 1 pC = 1 10⁻¹² C
let's calculate
v = [tex]\sqrt{ \frac{2 \ 1 \ 10^{-12} 120 \ 10^3}{500 ^{2} }[/tex]
v = 4.8 10⁻⁴ m / s
a pool and stops at the
Which best describes his
motion?
A. Linear
B. Projectile
C. Vibrational
In Linear motion the swimmer swims
Answer: A
Explanation: Linear motion.
Definition of continental polar
cold, dry, and stable air masses .
Two resistors 5 ohm's each can be combined to give an equivalent resistance of
Answer: 10 Ω or 2.5 Ω
Explanation:
In series resistance R = 5 Ω + 5 Ω =10 Ω. If resistors are parallel, resistance is
1/R = 1/5Ω+ 1/5Ω and R = 2,5 Ω
A circular loop of radius 13 cm carries a current of 13 A. A flat coil of radius 0.94 cm, having 58 turns and a current of 1.9 A, is concentric with the loop. The plane of the loop is perpendicular to the plane of the coil. Assume the loop's magnetic field is uniform across the coil. What is the magnitude of (a) the magnetic field produced by the loop at its center and (b) the torque on the coil due to the loop
Answer:
[tex]6.28\times 10^{-5}\ \text{T}[/tex]
[tex]1.92\times 10^{-6}\ \text{Nm}[/tex]
Explanation:
[tex]\mu_0[/tex] = Vacuum permeability = [tex]4\pi 10^{-7}\ \text{H/m}[/tex]
[tex]I_l[/tex] = Current in circular loop = 13 A
[tex]r_l[/tex] = Radius of circular loop = 13 cm
[tex]N[/tex] = Number of turns = 58
[tex]r_c[/tex] = Radius of coil = 0.94 cm
[tex]I_c[/tex] = Current in coil = 1.9 A
[tex]\theta[/tex] = Angle between loop and coil = [tex]90^{\circ}[/tex]
Magnitude of magnetic field in circular loop
[tex]B_l=\dfrac{\mu_0I_l}{2r_l}\\\Rightarrow B_l=\dfrac{4\pi 10^{-7}\times 13}{2\times 13\times 10^{-2}}\\\Rightarrow B_l=6.28\times 10^{-5}\ \text{T}[/tex]
The magnetic field produced by the loop at its center is [tex]6.28\times 10^{-5}\ \text{T}[/tex].
Torque is given by
[tex]\tau=\pi NI_cr_c^2B_l\sin\theta\\\Rightarrow \tau=\pi 58\times 1.9\times (0.94\times 10^{-2})^2\times 6.28\times 10^{-5}\sin90^{\circ}\\\Rightarrow \tau=1.92\times 10^{-6}\ \text{Nm}[/tex]
The torque on the coil due to the loop [tex]1.92\times 10^{-6}\ \text{Nm}[/tex].
Why can’t human males be carriers for sex linked (x-linked) disorders?
Answer:
This is because the X chromosome is large and contains many more genes than the smaller Y chromosome. In a sex-linked disease, it is usually males who are affected because they have a single copy of X chromosome that carries the mutation.
Explanation:
what is the minimum effort required to raise the block?
Answer:
2000 N.
Explanation:
From the question given above, the following data were obtained:
Load (L) = 8000 N
Mechanical advantage (MA) = 4
Effort (E) =?
The mechanical advantage of a machine is simply defined as:
Mechanical advantage = Load / Effort
MA = L / E
With the above formula, we can obtain the effort used to raise the load of 8000 N as follow:
Load (L) = 8000 N
Mechanical advantage (MA) = 4
Effort (E) =?
MA = L / E
4 = 8000 / E
Cross multiply
4 × E = 8000
Divide both side by 4
E = 8000 / 4
E = 2000 N
Thus, the effort used to raised the load is 2000 N.
It has been shown that the half-life for this radioactive isotope is 20 years. In the year 2000, an archaeology team unearths pottery and is using this isotope for radiometric dating to place the age of the pottery. It is shown that 95% of the nuclei have decayed. How much mass has decayed? How much mass is left?
I'd prefer to be shown a step-by-step on how to solve for these questions. I do better with seeing the step-by-step, and can retain the information better.
Answer:
(1/2)*n = .05 by the definition of half-life where n is the number of half-lives
n ln .5 = ln .05
n = ln .05 / ln .5 = 4.32 number of half-lives
So 4.32 * 20 = 86.4 years has passed
Actually, they only want the mass left. However, all that has changed is that
95% of the original radioactive atoms have changed to a different form of about the same amount of mass. The amount of mass remaining would be about the same. Also, one doesn't know the percentage of radioactive atoms
that formed the original mass.
What is the impulse required to stop a 4.8 kg mass traveling at 18.9 m/s?
Report your answer to 1 decimal place.
Answer:
MASS=4.8KG
VELOCITY= 18.9
Put into the formula.
Explanation:
Impulse= Mass* change in velocity, it gives you everything you need to input it into the formula
What is one benefit to measuring your body’s flexibility?
A.
meeting the national requirement for flexibility
B.
determining your muscular strength
C.
tracking your flexibility improvements over time
D.
increasing the length of your life
Answer:
C
Explanation:
if you measure your body's flexibility then you can keep track of how flexible you have gotten over time
What determines the precision of a measurement?
Answer:
Precision is determined by a statistical method called a standard deviation To determine if a value is precise find the average of your data, then subtract each measurement from it
What is R2 in the circuit?
WILL GIVE BRAINLIEST !!!!
Answer:
1. Rₑq = 4 Ω
2. R₂ = 6 Ω
3. Vₜ = 12 V, V₁ = 12 V, V₂ = 12 V
4. Iₜ = 3 A, I₁ = 1 A, I₂ = 2 A
Explanation:
1. Determination of the equivalent resistance
Voltage (V) = 12 V
Current (I) = 3 A
Resistance (Rₑq) =?
V= IRₑq
12 = 3 × Rₑq
Divide both side by 3
Rₑq = 12 / 3
Rₑq = 4 Ω
Thus, the equivalent resistance (Rₑq) = 4 Ω
2. Determination of R₂.
Equivalent resistance (Rₑq) = 4 Ω
Resistance 1 (R₁) = 12 Ω
Resistance 2 (R₂)
Since the resistor are in parallel arrangement, the value of R₂ can be obtained as follow:
Rₑq = R₁ × R₂ / R₁ + R₂
4 = 12 × R₂ / 12 + R₂
Cross multiply
4(12 + R₂) = 12R₂
48 + 4R₂ = 12R₂
Collect like terms
48 = 12R₂ – 4R₂
48 = 8R₂
Divide both side by 8
R₂ = 48 / 8
R₂ = 6 Ω
3. Determination of the total voltage (Vₜ), V₁ and V₂.
From the question given above, the total voltage is 12 V
Since the resistors are arranged in parallel connection, the same voltage will go through them.
Thus,
Vₜ = V₁ = V₂ = 12 V
4. Determination of the total current (Iₜ), I₁ and I₂
From the question given above, the total current (Iₜ) is 3 A
Next, we shall determine I₁. Since the resistors are arranged in parallel connection, different current will pass through each resistor respective.
Vₜ = V₁ = 12 V
R₁ = 12 Ω
I₁ =?
V₁ = I₁R₁
12 = I₁ ×12
Divide both side by 12
I₁ = 12 / 12
I₁ = 1 A
Next, we shall determine I₂. This can be obtained as follow:
Iₜ = 3 A
I₁ = 1 A
I₂ =?
Iₜ = I₁ + I₂
3 = 1 + I₂
Collect like terms
I₂ = 3 – 1
I₂ = 2 A