Calculate the atomic mass of the unknown element X described below.
Please help

Calculate The Atomic Mass Of The Unknown Element X Described Below. Please Help

Answers

Answer 1

Answer:

286

Explanation:

Add atomic mass of all the Isotopes,

                                          Outcome = 825

divide it by number of isotopes which is 4 because there are 4 isotopes

                       Atomic mass of x = [tex]\frac{825}{4}[/tex]

                       Atomic mass of x is 286

Answer 2

The atomic mass of the unknown element X is 206 amu. Thus option B is correct.

What is atomic mass?

Atomic mass is defined as the relative mass of the element's atom in comparison to the mass of an atom of the C12 isotope.

In an example, the general atomic mass is the average of the atomic masses of a large number of different isotopes.

First we added atomic mass of each isotopes

= 204 + 206 + 207 + 208 = 824

Now to calculate the atomic mass of element X we divide it by 4 as there is four isotopes

So, atomic mass = 824 / 4

                           = 206 amu

Thus, the atomic mass of the unknown element X is 206 amu. Thus option B is correct.

To learn more about atomic mass, refer to the link below:

https://brainly.com/question/17067547

#SPJ5


Related Questions

what is the hybridization of NO2​

Answers

Answer: Explanation:

If we apply the hybridization rule then it states that if the sum of the number of sigma bonds, lone pair of electrons and odd electrons is equal to three then the hybridization is sp2.

Which of the following contribute(s) to most of the mass of an atom?
Question 6 options:

A)

Neutrons only

B)

Protons and neutrons

C)

Protons and electrons

D)

Protons only
Question 7 (5 points)
In a certain chemical reaction, the bonds of the products contain more energy than the bonds of the reactants. For the reaction to occur, which of the following best describes what occurred?
Question 7 options:

A)

Energy was released, so the reaction is endothermic.

B)

Energy was released, so the reaction is exothermic.

C)

Energy was added, so the reaction is endothermic.

D)

Energy was added, so the reaction is exothermic
Question 8 (5 points)
A solution
Question 8 options:

A)

is a single-phase homogeneous mixture.

B)

must contain water.

C)

is always a liquid.

D)

can contain more than two phases.
Question 9 (5 points)
Which of the following is true of alloys?
Question 9 options:

A)

They can only be composed of metals.

B)

They must be held together by chemical bonds.

C)

They're liquid solutions.

D)

They must contain a metal.
Question 10 (5 points)
Which of the following best describes an atomic number? An element's identity is defined by its atomic number; this means it represents the number of
Question 10 options:

A)

electrons in the element.

B)

neutrons in its nucleus.

C)

protons plus neutrons in its nucleus.

D)

protons in its nucleus.

Answers

Answer:

1.

B) protons and newtrons

2.

D)

3.

C)

4.

A)

Which of the following is the BEST description of our atmosphere?

It dissolves meteors and protects us from ultraviolet radiation.

It’s made of a mixture of gases that protect Earth and help create conditions that allow life to live here.

It’s made of nitrogen and oxygen.

It contains a mixture of gases.

Answers

Answer:

I think the answer is B.

Answer:

B

Explanation:

Other things like A, C, and D are not the best explanation because they are all simple senteces.

Which element has an outer(ending) electron configuration of s2p4?

Answers

The question is in complete, the complete question is:

Which element has an outer electron configuration of s 2 p4 ?

(A) Ca (B) Cr (C) Ge (D) Se

Answer:

(D) Se

Explanation:

The outer electronic configuration of an atom reflects the group to which it belongs in the periodic table. Each group has its unique outermost electron configuration and number of electrons found in the outermost shell of the atoms of elements in the group.

s 2 p4  is the unique outermost electron configuration of group 16 elements. Group 16 elements have six electrons in their outermost shell. If we consider the options, only Se is a member of group 16. Hence it is only Se that has the outermost electron configuration s 2 p4 .

An element which has an outer (ending) electron configuration of [tex]s^2p^4[/tex] is: Oxygen.

Electron configuration can be defined as a formula that is used to denote the distribution of the atoms of a chemical element in an atomic orbital.

Basically, electron configuration uses four (4) main letters to illustrate the distribution of atoms in an atomic orbital:

spdf

The electron configuration of [tex]s^2p^4[/tex] indicates that the chemical element is in Group 6 and has six (6) electrons in its outermost shell.

Hence, a chemical element such as Oxygen (O) or Selenium (Sn) in Group 6 of the periodic table would have an electron configuration of [tex]s^2p^4[/tex].

Read more: https://brainly.com/question/18214726

What would be the temperature as well as pressure inside and outside of a can if it were to be placed in cold water?

Answers

Answer:

The hot gas molecules are the same pressure as the air outside the can. When the can is placed in cold water upside down, the hot gas water molecules are cooled very rapidly. ... Since the air pressure outside the can is stronger than that inside the can, it causes the can to collapse.

Explanation:

How would I create a Lewis dot structure with the compound: CHBr2Cl

Answers

there is a lewis dot calculator on google if that helps

Answer:

Step 1: Find the Total Number of Valence Electrons. ...

Step 2: Find the Number of Electrons Needed to Make the Atoms "Happy" ...

Step 3: Determine the Number of Bonds in the Molecule. ...

Step 4: Choose a Central Atom. ...

Step 5: Draw a Skeletal Structure. ...

Step 6: Place Electrons Around Outside Ato

Explanation:

Is it true or false that the Temperature is a direct measurement of the energy stored in a substance?

Answers

False, Temperature is a physical quantity that expresses hot and cold

At what time was the frog sitting still or at rest

Answers

Answer:

What are the times and is that your question?

Explanation:

Radio waves are examples of electromagnetic waves. T or F

Answers

Answer:

the answer is true

Explanation:

Why can stars be called element factories?

Answers

Answer:

They came from the element factories we call stars. Stars are mostly hydrogen throughout most of their lifespans. They are driven by massive and continuous thermonuclear reactions and gravity. ... This extra heat begins to fuse helium atoms into heavier elements like carbon and oxygen and gives new life to the star.

Explanation:

Nearly all elements heavier than hydrogen were not created by the Big Bang. They came from the element factories we call stars. ... This extra heat begins to fuse helium atoms into heavier elements like carbon and oxygen and gives new life to the star. BTW I GOT THIS FROM SAFARI :)

What formations are created by sand deposition by waves?

Cirques
Dunes
Horns
Spits

Answers

Answer:

Spits

Explanation:

Deposit by waves include beaches. They may shift along the shoreline due to longshore drift. Other wave deposits are spits, sandbars and barrier islands

Answer: D

Explanation:

Rank lead, phosphorus, and barium in order of increasing ionization energy.
A) Pb < P < Ba
B) Ba < P < Pb
C) Pb < Ba < P
D) Ba < Pb < P

Answers

Answer:

D) Ba < Pb < P

Explanation:

Barium (Ba): 5,2117

Lead (Pb): 7,4167

Phosphorus (P): 10,4867

Increasing order of ionization energy:

Ba < Pb < P

Electronic configurations of given elements

Pb: [Xe] 6s² 4f¹⁴ 5d¹⁰ 6p²

P:   [Ne] 3s² 3p³

Ba: [Xe] 6s²

All the given elements have stable half-filled subshells. But phosphorus has the smallest atomic size among them, so it will have the lowest tendency to remove an electron from its valence shell and hence will require the highest amount of ionization energy.  Barium has a higher atomic size than lead, therefore it has lower ionization energy than lead.

How are ionization energy and atomic size related?The force of attraction is stronger when the electron is closer to the nucleus, and as a result, more energy is needed to overcome this attraction and remove the electron.Therefore, the ionization energy increases with decreasing radius and vice versa.

Learn more about trends of ionization energy here:

https://brainly.com/question/6842791

#SPJ2

Which of the following situations best describes an ionic bond?
Two atoms each give up an electron, and an electrostatic force attracts them.
One atom gains an electron while the other atom loses an electron, and an
electrostatic force attracts them.
One atom gains an electron while the other atom loses an electron, and an
electrostatic force repels them.
Two atoms gain electrons and an electrostatic force attracts them.

Answers

One atom gains an electron while the other atom loses an electron and a electrostatic force attracts them.

The situation which best describes the ionic bond is “ One atom gains an electron while the other atom loses an electron, and an electrostatic force attracts them”.

What is an ionic bond?

An ionic bond is formed between two atoms by donating an electron from the electropositive atom and withdrawal of that electron by the second atom which is electronegative and thereby attaining stability by making their valency completed.

The electron loss-gain interaction make an electrostatic force of attraction between them, where the electrons from the electropositive atom is attracted towards the electronegative atom.

Thus the two atoms are bound together by the electrostatic force of attraction created by the electron donation. Hence, option b is correct.

To learn more about ionic bonding refer the link below;

https://brainly.com/question/12663276

#SPJ2

What would happen if I throw nail polish remover into the fireplace

Answers

Answer:

Your house could catch fire because while Nail Polish Remover itself isn't particularly flammable, the vapors it gives off are. Because of this, sparks could occur if nail polish is used near open flame or was tossed in, and then the sparks could catch onto something else and grow. I would not recommend trying this.

Explanation:

Sanjay is learning about the elements that make up Earth’s crust. Ms. Richards, his Earth science teacher, gives him an element and asks him to determine which element from Earth’s crust it is. She also provides Sanjay with this table. Sanjay weighs the element and finds that it has a mass of 17.98 g. By placing the element in water, he determines the volume of the substance to be 2.2835 mL.

Based on the table from Ms. Richards, what element from Earth’s crust did Ms. Richards gave to Sanjay?
A) iron
B) calcium
C) aluminum
D) silicon

Answers

Answer:

Iron

Hope this helps! Stay safe!

(Plz vote me as brainliest)

Answer:iron

Explanation:

The purpose for witch something is designed or exists

Answers

Answer:

to help

Explanation:

to help

The process during which a substance changes from a solid directly to a gas without becoming a liquid is known as: Example(dry ice)

A)
condensation.
B)
fusion.
C)
melting.
D)
sublimation.

Answers

The answer is sublimation

if two successive terms of the fibonacci sequence are both odd, is the next term is even or odd? why?​

Answers

Answer:

Even because you always add the previous two terms in the sequence. Since they are both odd, the next term will be even. (odd+odd = even)

Explanation:

Question 1 of 10 What is molarity a measurement of? O A. The volume of liquid containing a dissolved substance B. The grams of a substance dissolved in a liquid O c. The concentration of a substance dissolved in a liquid O D. The number of moles of a dissolved substance

Answers

To do this measure called molarity is commonly used. Molarity (M) is defined as the number of moles of solute (n) divided by the volume (V) of the solution in liters. It is important to note that the molarity is defined as moles of solute per liter of solution, not moles of solute per liter of solvent.                    

so the answer is D.

hope this helps have a great day....!

According to the concept of molar concentration, molarity is  defined as the number of moles of a dissolved substance.

What is molar concentration?

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ5

what is the name of CH3CH2CH2C(O)CH2CH3

Answers

Answer:

1-methoxypropane

Explanation:

A solution that holds more solute than it normally can under the conditions at a given temperature is _____. supersaturated unsaturated saturated diluted

Answers

Answer:

Supersaturated !

Explanation:

What’s it called when a sound wave is slowed down by a new medium?

Answers

Answer:

Refraction of waves involves a change in the direction of waves as they pass from one medium to another. ... Sound waves travel slower in cooler air than they do in warmer air.

Explanation:

What are the four main types of tissues in the human body?

epithelial

dermal

vascular

connective

muscle

nervous

Answers

Answer:

epithelium, muscle, connective tissue and nervous tissue.

Explanation:

Explanation:

Epithelial

Connective

Muscle

Nervous

9) Which must be a mixture of substances?

A) solid
B) liquid
C) gas
D) solution

Answers

Answer:

D

Explanation:

What does the name "atom" mean in
Greek?

Answers

It means indivisible

Answer:

The Greek root of atom is atomos, which means "indivisible," since the scientists who first gave the atom its name imagined it couldn't be split or divided into smaller pieces.

Explanation:

In models of molecules, spheres of different colors and
sizes represent different types of atoms.
Which model shows a molecule of a substance that is made up of three
elements?

A
B
C
Or
D ?

Answers

Answer:

D

Explanation:

According to this question, each model of molecules in the options contains spheres of different colors and sizes representing different types of atoms. The atoms of the same element are the spheres of same color and size while atoms of different element are of different color or size.

Therefore, the model showing a molecule of a substance that is made up of three elements is model D because it is made up of three distinct spheres representing atoms of each element.

- The red sphere is the atom of the first element

- The big dark sphere is the atom of the second element

- The small white sphere is the atom of the third element

Answer:

D

Explanation:

in addition to Earthquake, hurricane, which of the following could be categorized as a "disaster" risk?

Answers

Answer:

I think its a World War.

Explanation:

This is just what my sister told me, since the cost for the war could make a country poor and the damage it could cause could lead a country to disaster.

i think d answer is tsunami

18. Which two particle diagrams each represent a sample of one substance? Key O = atom of oxygen = atom of hydrogen 0 = atom of chlorine 8 OO 1 நம் மும் 20 2000 (1) I and III (3) II and IV (2) II and III (4) I and II​

Answers

Answer:

1 and 11

Explanation:

Answer:1 and 11

Explanation:

How is the term stable used in the text?

Answers

Answer:

When something is stable, it's fixed and steady. If you needed advice, you'd probably go to your most stable friend, the one least likely to act crazy or be easily upset.

Explanation:

Whether you're talking about an object or a person, the adjective stable implies reliability and strength. You can describe a government as stable, or a relationship, or a desk. A completely different meaning of stable is the noun "building used for housing horses or other animals." Both senses of the word come from the Latin stabilis, "firm or steadfast."


When an atom is trying to obtain stability, what part(s) of the atom change(s)?

Answers

It gains stability by gaining/losing electrons
Other Questions
f a bicyclist travels 30 kilometers in 2 hours, her average speed is _______________. will mark branniest need fast How much candy will each person get if 5 people share 6 1/2 pounds of Swedish fish. Which pair of words is often used to describe tone? a. fiction/nonfictionb. beautiful/pretty c. easy/hard d. formal/informal The image below is an artists interpretation of the effects of nationalism. Explain the historical circumstances that led to the historical development depicted in the image above. Which city was the center of government in Byzantine reconquered lands?1.Carthage2.Cordoba 3.Ravenna4.Syracuse Organization is (10 points)athe way words and phrases are used to tell the storybthe key elements of the story and the details that support themcthe format, structure and timeline of the storydthe use of proper spelling, punctuation, capitalization, and grammar KEEPING UP WITH THE JONESES text structure "ect the best answer for the question.- A polygon that has all sides the same measure and all angles the same measure is called what? Review the steps in the derivation of the tangent sum identity. The steps are not in order.A 2-column table with 4 rows. Column 1 has entries 1, 2, 3, 4. Column 2 has entries StartFraction sine (x + y) Over cosine (x + y) EndFraction, StartStartFraction StartFraction sine (x) cosine (y) Over cosine (x) cosine (y) EndFraction + StartFraction cosine (x) sine (y) Over cosine (x) cosine (y) EndFraction OverOver StartFraction cosine (x) cosine (y) Over cosine (x) cosine (y) EndFraction minus StartFraction sine (x) sine (y) Over cosine (x) cosine (y) EndFraction EndEndFraction, StartFraction tangent (x) + tangent (y) Over 1 minus tangent (x) tangent (y) EndFraction, StartFraction sine (X) cosine (y) + cosine (x) sine (y) Over cosine (x) cosine (y) minus sine (x) sine (y) EndFraction.Which list shows the steps in the correct order?I --> II --> IV --> IIII --> IV --> II --> IIIIII --> I --> II --> IVIII --> I --> IV --> II What are some internet hardware components? What is used to make the internet work? Identify the plant tissues in the three images.AB.C The angle represents the phase shift, determined by the initial conditions of the experiment or the position of the weight at t = 0. If the weight is at its maximum positive position (weight is above equilibrium) at t = 0, then = 0. If the weight is at its maximum negative position (spring is stretched and weight is below equilibrium) at t = 0, then . If the weight is traveling in the negative direction and passing through equilibrium at t = 0, then . In the response box, describe the initial condition of our experiment; specifically, describe the position of the weight and the direction in which it was traveling. The Sheridan Inc., a manufacturer of low-sugar, low-sodium, low-cholesterol TV dinners, would like to increase its market share in the Sunbelt. In order to do so, Sheridan has decided to locate a new factory in the Panama City area. Sheridan will either buy or lease a site depending upon which is more advantageous. The site location committee has narrowed down the available sites to the following three very similar buildings that will meet their needs. Building A: Purchase for a cash price of $612,100, useful life 26 years. Building B: Lease for 26 years with annual lease payments of $71,490 being made at the beginning of the year. Building C: Purchase for $655,200 cash. This building is larger than needed; however, the excess space can be sublet for 26 years at a net annual rental of $6,850. Rental payments will be received at the end of each year. The Sheridan Inc. has no aversion to being a landlord. In which building would you recommend that The Sheridan Inc. locate, assuming a 11% cost of funds? Which two following best identify the central themes of this speech in the passage the man in the arena?A. FightingB. CourageC. Winning vs. losingD. PoliticsE. Action vs. criticismF. How to be a good president I. Escribe la forma correcta de cada verbo en el pretrito.1. Yoalto y mi hermana es baja. SER2.Tmuy deportista. SER3.Mis amigos y yoaltos. SER4.Yopelo rubio. TENER5.Tu primaojos azules. TENER6.Mis hermanos y yopelo negro. TENER7.Yoa las montaas en el invierno. IR8.Tpracticar deportes con tus amigos despus de las clases. QUERER9.Ud.noestudiar para el examen. QUERER10.Mis amigos y youna bicicleta nueva. QUERER11.YOa nadar en el verano. IR helppppChemical bond formation might take place due to the interaction between a(n) _______ and an anionA.magneticB.valenceC.electrostatic D.cation What was a major concern of the smaller states?They wanted to maintain their equal status in CongressThey were worried the new national government would still be too weakThey wanted their representation based on populationThey wanted to uphold slavery I need help!!!!! ASAP Explain in your own words what chemical change is Bill Nye said the air pressure makes things what?