Calculate the change in the kinetic energy (KE) of the bottle when the mass is increased. Use the formula
KE = one half.mv2, where m is the mass and v is the speed (velocity). Assume that the speed of the soda bottle falling from a height of
0.8 m will be 4 m/s, and use this speed for each calculation.

Record your calculations in Table A of your Student Guide.

When the mass of the bottle is 0.125 kg, the KE is
✔ 1
kg m2/s2.

When the mass of the bottle is 0.250 kg, the KE is
✔ 2
kg m2/s2.

When the mass of the bottle is 0.375 kg, the KE is
✔ 3
kg m2/s2.

When the mass of the bottle is 0.500 kg, the KE is

✔ 4
kg m2/s2.

Answer included in Question

Answer:

hmmmmm ill get back later

Explanation:

Answer:

0.02976°C

Explanation:

Heat Supplied = mcø

ø = 500/(4*4200)

ø = 0.02976 °C

The magnitude and direction of the velocity of the  golf ball is 6.4 m/s at 38.7⁰.

The given parameters:

The magnitude of the resultant velocity of the golf ball is calculated as follows;

[tex]v= \sqrt{v_y^2 + v_x^2} \\\\v = \sqrt{4^2 + 5^2} \\\\v = 6.4 \ m/s[/tex]

The direction of the golf ball's velocity is calculated as follows;

[tex]\theta = tan^{-1} (\frac{v_y}{v_x} )\\\\\theta = tan^{-1}(\frac{4}{5} )\\\\\theta = 38.7 \ ^0[/tex]

Thus, the magnitude and direction of the velocity of the  golf ball is 6.4 m/s at 38.7⁰.

Learn more about magnitude and direction of velocity here: https://brainly.com/question/2456181

Gases have heavier molecules. Since all gases have the same average kinetic energy at the same temperature, lighter molecules move faster and heavier molecules move slower on average.

Answer:

Depends on the weight i would be 7.120

Water’s high specific heat capacity explain why water is liquid at room temperature

option C is the correct answer.

The specific heat capacity of an object is the amount of heat required to raise the temperature of a unit mass of the substance by 1 kelvin.

The relationship between specific heat capacity and heat capacity of a substance is given as;

c = Q/mΔθ

where;

A high specific heat capacity implies that the substance absorbs more energy to change its state.

Thus, water has a high specific heat, meaning it takes more energy to increase the temperature of water compared to other substances. When water absorb more heat energy, it changes its state.

Learn more about specific heat capacity here: https://brainly.com/question/16559442

#SPJ1

Answer:

Explanation:

V = 100sin(ωt) + 150cos(ωt)

let x = ωt

V = 100sin(x) + 150cos(x)

a maximum or minimum will occur when the derivative is zero

V' = 100cos(x) - 150sin(x)

0 = 100cos(x) - 150sin(x)

100cos(x) = 150sin(x)

100/150 = sin(x)/cos(x)

0.6667 = tan(x)

x = 0.588 rad

V = 100sin(0.588) + 150cos(0.588)

V = 180.27756

as the maximum will not occur until ωt = 0.588 radians, for a cosine function we subtract that amount as a phase angle φ

V = 180.3 cos(ωt - 0.588)

or as a sine function, the phase angle lags the cosine by a difference of π/2

V = 180.3sin(ωt - (0.588 - π/2)

V = 180.3sin(ωt + 0.983)

Answer:

v² = u² + 2gh

8.9² = 0² + 2(9.8)h

h = 4.0 m

v = at

t = 8.9/9.8

t = 0.91 s

The weight of the aluminum foil is 26.20 N

To find the weight of the aluminum foil when it is unrolled, we need to find its volume.

The volume V = lwt where

So, V = lwt

= 22 m × 0.30 m × 0.15 × 10⁻³ m

= 0.99 × 10⁻³ m³.

So, its weight W = ρV where

So, W = ρV

W = 26460 N/m³ × 0.99 × 10⁻³ m³

W = 26195.4 × 10⁻³ N

W = 26.1954 N

W ≅ 26.20 N

So, the weight of the aluminum foil is 26.20 N

Learn more about weight of aluminum foil here:

https://brainly.com/question/9922121

A child on ice skates is given a small push from behind by a parent. There is an unbalanced force on the child, and the child’s motion will change direction or increase speed.

A child on ice skates is given a small push from behind by a parent. How are forces used to describe the resulting motion?

A child on ice skates is given a small push from behind by a parent. There is an unbalanced force on the child, and the child’s motion will change direction or increase speed.

Learn more about Newton's laws here: https://brainly.com/question/6839345

Answer: H2O2

Explanation:

First, calculate the moles of H2O2 reacting. In order to do this, we must evaluate the relative molecular mass ( Mr ) of hydrogen peroxide

Answer:

The work will increase the potential energy.

W = PE = mgh = 300(9.8)(30) = 88200 J

Answer:

Force is equal to the change in momentum per change in time.

Explanation:

That situation is described by Newton's Second Law of Motion. According to NASA, this law states, "Force is equal to the change in momentum per change in time. For a constant mass, force equals mass times acceleration." This is written in mathematical form as Force = mass.

Answer:

F

Explanation:

for every action there exists an equal and opposite reaction. The force acting on the two masses is identical in magnitude, but opposite in direction.

Answer:

If you mean by temperature

Water, cause say the water just sits there, it'll take a few minutes to cool down. But for concrete having all the hot sun rays on it during summer, can make it very hot, if you put 'cold water' there, it'll only last there for a moments (and that's by effect not waiting), if you wait for it to cooldown by itself, it'll take quite awhile.

If you mean solidify:

The stuff required to make concretes takes HOURS and HOURS to finish solidifying, unlike water being turn into ice normally only takes about half an hour or an hour (maybe 2) in the freezer (I don't know how long for ice, but not long at all in comparison to concrete).

Explanation:

Explanation was mostly part of the answer

The time taken for the two balls to hit each other is 8 s.

The given parameters:

The time taken for the two balls to hit each other is calculated by applying relative velocity formula as shown below;

[tex](V_1 - (-V_2) )t = s\\\\(V_1 + V_2) t = s\\\\(0.3 + 0.2) t = 4\\\\0.5t = 4\\\\t = \frac{4}{0.5} \\\\t = 8 \ s[/tex]

Thus, the time taken for the two balls to hit each other is 8 s.

Learn more about relative velocity here: https://brainly.com/question/17228388

Answer:

[tex] \huge \bold \blue{ \underline{ answer}}[/tex]

The splitting up of light into its constituent colours while passing from one medium to the other is called dispersion.

Answer:

A: P and N are both nonmetals, same strength: No

B: Most likely not

C: Same saying as B

D: Most likely yes

Explanation:

I don't actually know if i'm right, I just want to help you okay, so if it's wrong than sorry. Also I couldn't tell if the CI is a Ci(17) or CL(6+53)

Part reason why I was saying that B and C are most likely incorrect. And D the NH3 has more value than HF (if I remember)

As per the given situation, [tex]PH_3[/tex] is stronger acid than [tex]NH_3[/tex]. The correct option is A.

Any substance that tastes sour in water, turns blue litmus paper red, reacts with some metals to liberate hydrogen, reacts with bases to form salts, and promotes chemical reactions is considered an acid (acid catalysis).

Because strong acids have mostly ions in solution, the bonds that hold H and A together must be weak. Strong acids easily dissociate into ions.

Because weak acids exist primarily as molecules with only a few ions in solution, the bonds that hold H and A together must be strong.

[tex]PH_3[/tex] is a more potent acid than [tex]NH_3[/tex]. as PH3 has a pKa of -5.5 and [tex]NH_3[/tex] has a pKa of 9.9.

Thus, the correct option is A.

For more details regarding acid, visit:

https://brainly.com/question/14072179

#SPJ2

Answer:

The one falling from the greatest height will have the greatest speed.

h = 1/2 g t^2        time for ball to fall distance h

h2 / h1 = t2^2 / t1^2       dividing equations

h2 / t2^2 = h1 / t1^2

Let v be the average speed (v2 = h2 / t2)

1 / t2 * v2 = 1 / t1 * v1

v2 / v1 = t2 / t1      the one taking the longest to fall has the greater av. speed

Check:

h4 / h1 = t4^2 / t1^2     or

t4 / t1 = (h4 / h1)^1/2

In this case t4 / t1 = (4 / 1)^1/2 = 2  or twice the average speed

t1 = (2 h / g)^1/2 = .2^1/2 = .447       using g = 10

t4 = (2 h / g)^1/2 = .8^1/2 = .894

v1 = 1 / .447 = 2.24 m/s average speed

v4 = 4 / .894 = 4.47    or twice the average speed

Answer:

A student removed a wool hat from her head. Her hair stood up from static electricity. What did her hat do to cause this? ... Yes, the motor would run faster because the increased electrical force increases the magnetic force in the motor.

A student removed the wool from her head due to the static charge of electricity, it is caused.

A difference in electric charge within, on the surface of, or between two materials results in static electricity. Until it can be expelled through an electrical discharge or current, the charge stays. In contrast to current electricity, which transmits energy by letting an electric charge flow through a conductor or a space, static electricity does not transport energy.

When two surfaces come into contact, wear, and separate from one another when at least a single surfaces has a good resistance to electric current, a static electrostatic attraction can be produced. Because individuals can feel, hear, and even see a spark when the extra charge is neutralized when placed close to a powerful electrical conductor, most people are familiar with static electricity's effects.

To know more about charge :

https://brainly.com/question/19886264

#SPJ5

What metal is not at room temperature?

Mercury is a metallic chemical element that is an only metal that is not a solid at room temperature.

Answer:

Explanation:

v= s/t

V =90m/5s

V = 8m/s

Answer:

Explanation:

designer

illusionist

engineer

entrepreneur

salesperson

human

inventor

Answer:

The temperature is constant at 'X'. No increase or decrease. Would be same answer if there were a 'X' at temperature 'D'.

Slope of graph is zero so no change in the temperature.

Temperature is a physical quantity that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer.

Given graph of temperature and time, at position x there in no change in temperature with time so temperature is not changing.

Slope of graph is zero so no change in the temperature.

To learn more about temperature refer to the link:

brainly.com/question/11464844

#SPJ2

6.6 J/K

1.4 J/K

190 J/K

100 J/K

6.2 J/k

i think this is a answer

Answer:

Cool. What’s the Question?

Explanation:

0.8 seconds

Explanation:

time of flight = 2u/g

u=4m/s

g=10

= 8/10

= 0.8 sec

just a trial...not sure!!!

Given :

∅ = 60⁰

u = 4 m/s

g = 10m/s²

to find :

T = ?

Solution :

as per formula,

[tex]t = \frac{2u \: sin \theta}{g} [/tex]

now put the value : [tex]t \: = \frac{2 \times 4 \times sin \: 60}{10} [/tex]

as we know [tex] sin60 \: = \frac{ \sqrt{3} }{2} [/tex]

therefore,

[tex]t \: = \frac{8 \times \frac{ \sqrt{3} }{2} }{10} [/tex]

as we solve this we get,

[tex]t \: = \frac{ 2\sqrt{3} }{5} [/tex]

that's t = 0.69 sec

[tex]\sf\fbox\red{\:I \:hope \:it's \:helpful \:to \:you}[/tex]

A heat engine is a device that uses to produce useful work.

Definition - a device for producing motive power from heat, such as a gasoline engine or steam engine.

So..

If this is a true or false question.. Your answer is:

TRUE

Answer:

HEAT

Explanation:

Answer:

40m/s

Explanation:

V= u + at

v= 0

a= -10

t= 4

0= u -40

u= 40m/s

just trial!!!!!!!