calculate the concentration of buffer components present in 230.00 ml of a buffer solution that contains 0.400 m nh4cl and 0.400 m nh3 immediately after the addition of 1.30 ml of 6.00 m hno3.

The molality of concentrated hydrochloric corrosive is around 163.8 mol/kg. 

To discover the molality of hydrochloric corrosive, we ought to know the mass of HCl in 1 kg of the dissolvable (water).

Able to utilize the thickness of the arrangement and the molarity of the HCl to discover the mass of HCl in a given volume of the arrangement, and after that utilize the molar mass of HCl to change over mass to moles. At last, we will utilize the mass of water to calculate the molality of the arrangement.

The molar mass of HCl is around 36.5 g/mol.

To begin with, we ought to calculate the mass of HCl in 1 L (1000 mL) of the arrangement:

Mass of HCl in 1 L of arrangement = (thickness of arrangement) x (volume of solution) x (molarity of HCl) x (molar mass of HCl)

Mass of HCl in 1 L of arrangement = (1.18 g/mL) x (1000 mL) x (12.0 mol/L) x (36.5 g/mol) = 5.142 kg

Following, we have to calculate the mass of water within the arrangement:

Mass of water in 1 L of arrangement = (thickness of arrangement) x (volume of arrangement) - (mass of HCl in 1 L of arrangement)

Mass of water in 1 L of arrangement = (1.18 g/mL) x (1000 mL) - (5.142 kg) = 858 g

Presently able to calculate the molality of the arrangement:

Molality of HCl arrangement = (moles of solute) / (mass of dissolvable in kg)

MoL of solute (HCl) in 1 L of arrangement = (mass of HCl in 1 L of arrangement) / (molar mass of HCl) = 5.142 kg / 36.5 g/mol = 140.6 mol

Mass of dissolvable (water) in 1 L of arrangement = 858 g / 1000 g/kg = 0.858 kg

Molality of HCl arrangement = 140.6 mol / 0.858 kg = 163.8 mol/kg

Hence, the molality of concentrated hydrochloric corrosive is around 163.8 mol/kg. 

To know more about molality refer to this :

https://brainly.com/question/1370684

#SPJ4

Answer:

432 grams of Ag

Explanation:

First, we need to determine the limiting reagent between Mg and AgNO3.Using the stoichiometry of the balanced chemical equation, we can see that 1 mole of Mg reacts with 2 moles of AgNO3 to produce 2 moles of Ag.

The number of moles of Mg present in 48 grams can be calculated as:

48 g / 24 g/mol = 2 moles Mg

Now, let's calculate the number of moles of Ag that can be produced from 2 moles of Mg:

2 moles Mg x (2 moles Ag / 1 mole Mg) = 4 moles Ag

Finally, we can calculate the mass of Ag produced by multiplying the number of moles of Ag by its molar mass:

4 moles Ag x 108 g/mol = 432 grams Ag

Therefore, 48 grams of Mg will produce 432 grams of Ag in this reaction.

The enthalpy of the reactions include:

Using the heat of formation values listed below:

ΔHf°(Si) = 0 kJ/mol

ΔHf°(SiF₄) = -1613 kJ/mol

ΔHf°(F₂) = 0 kJ/mol

ΔHf°(H₂O) = -286 kJ/mol

ΔHf°(SO) = 248 kJ/mol

ΔHf°(H₂SO₄) = -814 kJ/mol

ΔHf°(KOH) = -424 kJ/mol

ΔHf°(K₂O₂) = -496 kJ/mol

ΔHf°(O₂) = 0 kJ/mol

ΔHf°(Fe₃O₄) = -1118 kJ/mol

ΔHf°(HCl) = -92 kJ/mol

ΔHf°(FeCl₂) = -341 kJ/mol

ΔHf°(FeCl₃) = -399 kJ/mol

The enthalpy of each reaction is:

(a) ΔH°rxn = [ΔHf°(Si) + 2ΔHf°(F₂)] - ΔHf°(SiF₄)

ΔH°rxn = [0 + 2(0)] - (-1613) kJ/mol

ΔH°rxn = 1613 kJ/mol

(b) ΔH°rxn = [ΔHf°(Si) + 2ΔHf°(F₂)] - ΔHf°(SiF₄)

ΔH°rxn = [0 + 2(0)] - (-1613) kJ/mol

ΔH°rxn = 1613 kJ/mol

(c) ΔH°rxn = [ΔHf°(H₂SO₄)] - [ΔHf°(SO) + ΔHf°(H₂O)]

ΔH°rxn = (-814) - [248 + (-286)] kJ/mol

ΔH°rxn = -276 kJ/mol

(d) ΔH°rxn = [6ΔHf°(KOH) + ΔHf°(O₂)] - [3ΔHf°(K₂O₂) + 3ΔHf°(H₂O)]

ΔH°rxn = [6(-424) + 0] - [3(-496) + 3(-286)] kJ/mol

ΔH°rxn = -1296 kJ/mol

(e) ΔH°rxn = [2ΔHf°(FeCl3) + ΔHf°(FeCl2) + 4ΔHf°(H₋O)] - [ΔHf°(Fe₃O₄) + 8ΔHf°(HCl)]

ΔH°rxn = [2(-399) + (-341) + 4(-286)] - [(-1118) + 8(-92)] kJ/mol

ΔH°rxn = -203 kJ/mol

Find out more on enthalpy here: https://brainly.com/question/16985375

#SPJ1

The Bowen's reaction series diagram is a representation of the order in which minerals crystallize as magma cools. The minerals that crystallize first are the ones with the highest melting temperatures, while those that crystallize last have the lowest melting temperatures.

In the case of the rock containing amphibole, potassium feldspar, and quartz, the mineral that would melt first upon heating would be quartz. This is because quartz is the mineral with the lowest melting temperature among the three. Amphibole and potassium feldspar have higher melting temperatures and would not melt until the temperature is raised significantly higher.

It is important to note that heating a rock containing these minerals would not necessarily cause them to melt completely. Instead, they may undergo partial melting, leading to the formation of new minerals with different compositions.

To know more about Bowen's reaction series:

https://brainly.com/question/13431170

#SPJ11

Bowen's reaction series is a diagram that shows the order in which minerals crystallize from a magma as it cools. The minerals on the left side of the diagram crystallize at higher temperatures, while those on the right side crystallize at lower temperatures.

In this case, the rock contains amphibole, potassium feldspar, and quartz. According to Bowen's reaction series, amphibole and potassium feldspar crystallize at higher temperatures than quartz. Therefore, if the rock is heated, quartz would melt first because it is the mineral that crystallizes at the lowest temperature.

Heating a rock causes the minerals to break down or transform, depending on the temperature and other conditions. The exact temperature at which a mineral melts depends on its composition, but in general, minerals that crystallize at higher temperatures require more energy to melt.

In this case, if the rock is heated to a temperature that is high enough to melt quartz, then the amphibole and potassium feldspar would still be solid. If the temperature is further increased, the amphibole and potassium feldspar would also melt at higher temperatures.

In summary, if a rock contains amphibole, potassium feldspar, and quartz, and the rock is heated, quartz would melt first because it is the mineral that crystallizes at the lowest temperature according to Bowen's reaction series.

Learn more about quartz here:

https://brainly.com/question/12822959

#SPJ11

1) Divide through 2

2) Equation 2 has the lowest coefficients

3) No, there is no other factor that can divide equation 2

4) An equation is correct if all the atoms on both sides of the equation have the same number.

A balanced reaction equation is a chemical equation that represents a chemical reaction with the same number of atoms of each element on both the reactant and product sides of the equation. In other words, the equation is balanced when the total number of atoms of each element is the same on both sides of the equation.

This is achieved by adjusting the coefficients (the numbers in front of the chemical formulas) of the reactants and products until the number of atoms of each element is equal on both sides.

Learn more about reaction equation:https://brainly.com/question/3588292

#SPJ1

Answer: NA = no of molecules / no of moles

NA = no of molecules × molecular weight /weight

Explanation:

The change of state described is melting (option C). In melting, the particles of a substance gain energy and change from a regular ordered structure to a disordered structure with large distances between the particles, which results in the substance changing from a solid to a liquid state.

Melting is a physical process in which a substance changes from its solid state to its liquid state. It occurs when a solid substance absorbs enough heat energy to overcome the forces of attraction between its particles, causing the particles to move faster and become less ordered.

As a result, the substance loses its definite shape and takes the shape of the container in which it is placed, while retaining its volume. The temperature at which a substance melts is known as its melting point.

An example of melting is the melting of ice. At the melting point of water, which is 0°C (32°F) at standard pressure, ice changes from its solid state to its liquid state. The resulting liquid water takes the shape of its container, such as a glass, but still has the same volume as the ice from which it was melted.

Learn more about melting here:

https://brainly.com/question/15873508

#SPJ9

The given equation for testing the presence of lead cations (Pb) using potassium chromate (K₂CrO₄) is incorrect. The correct equation is Pb(aq) + K₂CrO₄(aq) ⇒ PbCrO4(s) + 2K+(aq).

The incorrect equation, Pb(aq) + CrO₄(aq) ⇔ PbCrO(aq), is incorrect because it does not take into account the charge balance of the species involved in the reaction. In the correct equation, two potassium ions (2K+) are formed as counter ions to balance the charge on the lead chromate (PbCrO₄) precipitate.

In addition, the incorrect equation refers to PbCrO(aq), which implies that lead chromate is in a dissolved state. However, lead chromate is highly insoluble in water and precipitates as a yellow solid. Therefore, the correct equation includes the formation of a solid precipitate of lead chromate.

To learn more about chromate follow the link:

https://brainly.com/question/31107847

#SPJ4

The complete question is:

Group 1 cations precipitate easily in a relatively high concentration of hydrochloric acid. After the separation from the other group 1 cations, the presence of lead can be tested by addition of potassium chromate. Explain what is wrong with the given equation for this test. Pb(aq) + CrO₄(aq) ⇔ PbCrO(aq)

The term defined as a pollutant that is formed by a chemical reaction between a primary pollutant and another compound in the atmosphere (either natural or human-made) is "secondary pollutant".

Primary pollutants are directly emitted into the atmosphere from sources such as cars, factories, and power plants. Examples of primary pollutants include carbon monoxide (CO), sulfur dioxide (SO₂), and nitrogen oxides (NOₓ).

Secondary pollutants, on the other hand, are not directly emitted into the atmosphere, but are formed through chemical reactions between primary pollutants and other compounds in the atmosphere. Examples of secondary pollutants include ground-level ozone (O₃), which is formed through the reaction of NOₓ and volatile organic compounds (VOCs), and acid rain, which is formed through the reaction of SO₂ and NOₓ with water, oxygen, and other chemicals in the atmosphere.

The formation of secondary pollutants is often dependent on factors such as temperature, sunlight, and the presence of other chemicals in the atmosphere. Secondary pollutants can be just as harmful to human health and the environment as primary pollutants, and are an important consideration in air pollution control strategies.

To learn more about pollutants, here

https://brainly.com/question/28519286

#SPJ4

As a result, it is important to store NaOH in a dry and cool place, away from any sources of moisture or water.

NaOH, also known as sodium hydroxide, is a highly hygroscopic solid. This means that it can easily absorb moisture from its surroundings, including the air. When NaOH absorbs water, it can become more corrosive and potentially dangerous.

This is why it is also important to handle NaOH with care and wear appropriate protective gear, such as gloves and goggles. Additionally, any spills or leaks should be cleaned up immediately and properly disposed of according to local regulations.

By following these precautions, NaOH can be safely used in a variety of applications, including in the production of soap, paper, and textiles.

To learn more about : water

https://brainly.com/question/19491767

#SPJ11

Grizzly bears are omnivores, meaning that they consume both plant and animal matter. This study, which analyzed nitrogen content in bear fur samples, indicates that bears that consume more animal matter have a higher nitrogen content in their diet and are therefore more active.

Nitrogen is an essential nutrient for building proteins and is found in higher amounts in animal matter compared to plant matter. Therefore, bears that consume more animal matter may have more energy and be more active.
Hi! Based on your question, it seems that you want to know which type of food, when consumed by grizzly bears, leads to higher activity levels, as indicated by nitrogen content in their fur samples. Grizzly bears are omnivores, meaning they eat both plants and animals. Nitrogen content in their fur samples can be used as an indicator of the bear's diet. Typically, higher nitrogen content is associated with a diet richer in animal protein. Therefore, we can conclude that grizzly bears consuming more animal protein are more active.

learn more about nitrogen here

https://brainly.com/question/4492682

#SPJ11

Grizzly bears are omnivores. this data (taken from bear fur samples to determine nitrogen content in their diet)x indicates that bears that consume ___ are more active

Grizzly bears are omnivores, which means that they consume both plants and animals. The data taken from bear fur samples to determine nitrogen content in their diet indicates that bears that consume more animal protein are more active. Animal protein provides bears with the necessary energy and nutrients to support their active lifestyles, including hunting, scavenging, and defending their territories.

However, it is important to note that the amount of animal protein consumed by grizzly bears varies depending on factors such as season, location, and availability of food sources.

To know more about amount of animal protein:

https://brainly.com/question/31062670

#SPJ11

The concentration in molarity of the solution is 2.72 M.

To calculate the molarity of the solution, we need to first calculate the number of moles of KOH present in the solution.

Next, we need to calculate the volume of the solution in liters.

Finally, we can calculate the molarity of the solution using the formula:

Therefore, the concentration in molarity of the solution made by dissolving 20.0 grams of KOH in 150.0 mL of H2O is 2.72 M.

To learn more about molarity of the solution, here

https://brainly.com/question/16587536

#SPJ4

The sample is approximately 1,408,000,000 years old.

The half-life of uranium-235 is 704,000,000 years, which means that every 704,000,000 years, the amount of uranium-235 in a sample will be reduced to half of its original amount.

If a sample of uranium-235 has to be reduced to 1/4 of its original amount, it means that it has undergone two half-lives because:

- After one half-life, the amount of uranium-235 remaining is 1/2 of the original amount.
- After two half-lives, the amount of uranium-235 remaining is 1/2 x 1/2 = 1/4 of the original amount.

Therefore, the age of the sample can be calculated by multiplying the half-life of uranium-235 by the number of half-lives that have occurred:

Age of sample = Half-life of uranium-235 x Number of half-lives
Age of sample = 704,000,000 years x 2
Age of sample = 1,408,000,000 years

Therefore, the sample is approximately 1,408,000,000 years old.

Visit to know more about Sample:-

brainly.com/question/24466382

#SPJ11

Answer: exothermic reaction

Explanation: To create more heat, shift to the product side with the exothermic reaction. An exothermic reaction produces heat. The equation is:

N2(g) + 3H2(g) <-> 2NH3(g) + heat. It's exothermic because heat is a product.

In an equilibrium mixture of 1m each of CO² and H² at 25 degrees, the substance with the highest concentration is CO².

This is because when these two substances are brought together, they will react to form water and Carbon Monoxide (CO). The reaction is exothermic, meaning that energy is released in the form of heat.

This energy will cause the reaction to favor the formation of CO² over H², as H² requires more energy to form. As a result, the equilibrium mixture will have a higher concentration of CO² than H².

Know more about Equilibrium mixture here

https://brainly.com/question/13082748#

#SPJ11

Density is defined as the mass of a substance per unit volume. In this case, the density of urine is given as 1.02 g/ml. This means that for every 1 ml of urine, there is 1.02 g of mass.

To find the mass of urine eliminated by the patient in one day, we need to multiply the volume of urine by its density. The volume of urine is given as 1250 ml.

Mass of urine = Volume of urine x Density of urine

Mass of urine = 1250 ml x 1.02 g/ml

Mass of urine = 1275 g

Therefore, the mass of urine eliminated by the patient in one day is 1275 g.

Learn more about  volume here

https://brainly.com/question/1578538

#SPJ11

The body is capable of producing all of the amino acids it need, but it must have enough energy to do so. False

The body is capable of producing some of the amino acids it needs, but there are nine essential amino acids that it cannot make and must be obtained from the diet. Histidine, isoleucine, leucine, lysine, methionine, phenylalanine, threonine, tryptophan, and valine are among the necessary amino acids.

The body also requires energy to synthesize non-essential amino acids, and if there is insufficient energy, the body may not be able to produce enough of these amino acids. Therefore, both dietary intake and energy availability are important for optimal amino acid production and overall health.

Learn more about amino acids

https://brainly.com/question/14583479

#SPJ4

The statement "The body is capable of manufacturing all of the amino acids it needs but it must have sufficient energy to be able to do so. " is False.

The body is capable of producing some of the amino acids it needs, but there are nine essential amino acids that it cannot make and must be obtained from the diet. These essential amino acids include histidine, isoleucine, leucine, lysine, methionine, phenylalanine, threonine, tryptophan, and valine.

The body also requires energy to synthesize non-essential amino acids, and if there is insufficient energy, the body may not be able to produce enough of these amino acids. Therefore, both dietary intake and energy availability are important for optimal amino acid production and overall health.

For more such questions on amino acids

https://brainly.com/question/30265108

#SPJ11

The symbols for the chemical elements that meet the given criteria are Na and Mg.

The chemical elements that have atomic number 11 greater than and atomic mass less than 29.9 u are sodium (Na) and magnesium (Mg). Sodium has an atomic number of 11 and an atomic mass of approximately 22.99 u,

while magnesium has an atomic number of 12 and an atomic mass of approximately 24.31 u. These elements are located in the third period of the periodic table and are both alkaline earth metals.

The symbol for sodium is Na, which comes from the Latin word natrium, while the symbol for magnesium is Mg, which comes from the Greek word magnesia. Both of these elements are essential for life and have numerous applications in industry and medicine.

To learn more about : elements

https://brainly.com/question/18096867

#SPJ11

The pH of lemon juice is 2.4, the pOH is 11.6, and the hydroxide ion concentration is 2.51x10⁻¹²M.

Given, hydrogen ion concentration [H⁺] = 4x10⁻³ M

pH = -㏒[H⁺]

pH = -㏒(4x10⁻³)

pH = 2.4

Using the relation pH + pOH = 14, we can find pOH as:

pOH = 14 - pH

pOH = 14 - 2.4

pOH = 11.6

Also, we know that pH + pOH = 14, so we can find [OH⁻] as:

pOH = -㏒[OH⁻]

11.6 = -㏒[OH⁻]

[OH⁻] = 10^(-11.6)

[OH⁻] = 2.51x10⁻¹² M

Therefore, the pH of lemon juice is 2.4, the pOH is 11.6, and the hydroxide ion concentration is 2.51x10⁻¹² M.

Learn more about pH and ion concentration here:

https://brainly.com/question/14526375

#SPJ1

False. In a closed system, matter can not enter or exit that is there is no change in the matter of the system.

Three types of systems exist in nature:

1. Open System: In this system, the matter can interact with the surroundings or matter can enter or exit the system from the surrounding. Similarly, the energy of the system also interacts with its surroundings and can be lost or gained.

For example oceans etc.

2. Closed system: In this system, the matter is unable to interact with the surroundings that are matter can't exit or enter the system. While the energy of the system is able to interact with the surroundings.

For example Earth etc

3. Isolated system: In this system, both matter and energy are unable to interact with the surrounding. There is no exchange between matter and the energy of surroundings.

For example thermos-teel bottles etc.

Learn more about Open Systems:

https://brainly.com/question/28891854

#SPJ4

The reaction of both cis and trans isomers of 2,3-dimethyloxirane with HBr gives butane-2,3-diol. However, one of these stereoisomers gives a single achiral product, while the other gives two chiral enantiomers.

The reaction of 2,3-dimethyloxirane with itself is an example of an intramolecular nucleophilic substitution reaction.

The cis isomer of 2,3-dimethyloxirane has a plane of symmetry and is therefore an achiral molecule. When it reacts with itself, it will only form a single product nucleophilic substitution reaction.

The trans isomer of 2,3-dimethyloxirane is a chiral molecule and does not have a plane of symmetry. When it reacts with itself, it will form two enantiomers of the product, one being the mirror image of the other.

Learn more about 2,3-dimethyloxirane

https://brainly.com/question/15181918

#SPJ4

Okay, let's solve this step-by-step without using quadratics:

1) The equilibrium constant Kc = 0.36 means the equilibrium lies to the left. So there will be more N2O4 than NO2 at equilibrium.

2) The initial concentration of N2O4 is 0.1 mol dm^-3. Let's call this [N2O4]initial.

3) At equilibrium, the concentrations of N2O4 and NO2 will be [N2O4]equil and [NO2]equil respectively.

4) We know the equilibrium constant expression for this reaction is:

Kc = ([NO2]equil)^2 / [N2O4]equil

5) Setting this equal to 0.36 and plugging in 0.1 for [N2O4]initial, we get:

0.36 = ([NO2]equil)^2 / (0.1 - [NO2]equil)

6) Simplifying, we get:

0.036 = [NO2]equil^2

7) Taking the square root of both sides, we get:

[NO2]equil = 0.06 mol dm^-3

So the equilibrium concentration of NO2 is 0.06 mol dm^-3.

Let me know if you have any other questions! I can also provide a more step-by-step explanation if needed.

The number of grams of argon needed to fill a light bulb with a volume of 0.475 liters at 0 degrees Celsius and 1.5 atmospheres can be calculated using the ideal gas law.

The ideal gas law states that the product of pressure, volume, and temperature (in Kelvin) is equal to the number of moles of gas times the ideal gas constant (R). To convert Celsius to Kelvin, add 273.15.

Therefore, the number of moles of argon can be calculated as (1.5 atm)(0.475 L)(273.15 K) / (0.082 L atm K mol-1) = 68.9 moles. Since there are 28.0 g of argon in one mole, the total number of grams of argon needed to fill the light bulb is 68.9 moles x 28.0 g/mol = 1940 gb.

Know more about Moles of argon here

https://brainly.com/question/29055873#

#SPJ11

Ice crystals can form in a cold cloud through a process known as homogeneous nucleation. In this process, water molecules in the cloud collide with each other and form clusters.Once ice crystals are formed, they can grow in size through two mechanisms:

Deposition: This process involves the direct conversion of water vapor into ice crystals. As water vapor comes into contact with the surface of the ice crystal, it freezes and adds to the crystal's mass. This process is more efficient at colder temperatures and at higher altitudes, where there is less water vapor in the air.

Accretion: This process involves the collision of ice crystals with supercooled water droplets. Supercooled water droplets are liquid droplets that remain in a liquid state even at temperatures below freezing due to the absence of a nucleation site. When these droplets come into contact with an ice crystal, they can freeze instantly and become attached to the crystal's surface, leading to the growth of the ice crystal.As ice crystals continue to grow through deposition and accretion, they can eventually become large enough to fall from the cloud and reach the ground as precipitation, such as snow or hail. The size and shape of the ice crystals and their growth mechanisms can also affect the type of precipitation that is produced, such as the difference between snow and SLEET.

Learn more about  crystals

https://brainly.com/question/13008800

#SPJ11

A 100.0-mL buffer solution is 0.175 M in HClO and 0.150 M in NaClO

The pH of a solution gives a measure of the concentration of hydronium ions in the solution, and therefore, indicates the level of acidity or basicity of the solution.

We have a buffer solution made of 0.175 M HClO and 0.150 M NaClO

Part A :

pH of buffer solution can be calculated using equation, which is given below

pH =  pKa +  log  [ Base]/[Acid]

We have [acid] = [ HClO] = 0.175 M

[Base] = [NaClO] = 0.150 M

Ka of HClO is 3.5 x 10⁻⁸   (  Note : Ka value is taken from online resource. Please check the value given to you and make the changes accordingly)

pKa =  - log ( Ka)

pKa = - log ( 3.5 x 10⁻⁸)

pKa = 7.46

pH =   7.46 +  log  ( 0.150/0.175)

pH = 7.46 + ( -0.0669)

pH = 7.39

Part B:

When we add HBr to this buffer, basic component of buffer which is NaClO would try to neutralize effect of acid HBr.

Let's write the reaction that takes place here

HBr  +   NaClO  ------------->  HClO   +   NaBr

Let's find moles of HBr , HClO and NaClO we have

mol HBr = 150 mg HBr x  1 g/1000 mg x   1mol / 80.9 g = 0.00185 mol

mol NaClO = 100 mL x 1 L/1000 mL x  0.150 mol/L = 0.015 mol

mol HClO = 100 mL x 1 L/1000 mL x  0.175 mol/L = 0.0175 mol

pH = 7.46 +  log ( 0.01315/0.01935)   ( Note : we can use mole values instead of concentration terms in this case)

pH = 7.46 + (-0.1678)

pH = 7.29

Part C:

When NaOH is added to the buffer, acidic component , HClO of the buffer tries to neutralize its effect.

The reaction  given below

NaOH  +  HClO ----->  NaClO +   H2O

mol NaOH = 85 mg NaOH x 1 g/1000 g x 1 mol/40 g = 0.002125 mol

Equilibrium mol of base NaClO = 0.0171 and acid , HClO= 0.0154

pH = 7.46 +  log ( 0.0171/0.0154)

pH = 7.46 + 0.0455

pH = 7.51.

Learn more about pH of the solution:

https://brainly.com/question/29323762

#SPJ4

Complete question:

1) A 100.0-mL buffer solution is 0.175 M in HClO and 0.150 M in NaClO.

Part A: What is the initial pH of this solution?

Part B: What is the pH after addition of 150.0 mg of HBr?

Part C: What is the pH after addition of 85.0 mg of NaOH?

To determine the initial pH of the buffer solution, we can use the Henderson-Hasselbalch equation:

pH = pKa + log([base]/[acid])

where pKa is the dissociation constant of the weak acid (HClO), [base] is the concentration of the conjugate base (ClO-), and [acid] is the concentration of the weak acid (HClO).

First, we need to calculate the pKa of HClO. The Ka of HClO is 3.0 x 10^-8, so the pKa is:

pKa = -log(Ka) = -log(3.0 x 10^-8) = 7.52

Next, we can plug in the concentrations of HClO and NaClO into the Henderson-Hasselbalch equation:

pH = 7.52 + log(0.150/0.175)

pH = 7.52 - 0.080

pH = 7.44

Therefore, the initial pH of the buffer solution is 7.44.

Visit here to learn more about buffer solution  : https://brainly.com/question/24262133
#SPJ11

The volume in liters of with molarity, 3.0 M, solution of naoh has a volume of 0.40 which is diluted to make 0.15 m solution is equals to the 0.8 L.

Let the volume and molarity of NaOH solution be V₁ and M₁ and volume and molarity of other solution be V₂ and M₂. We have, Molarity of solution of NaOH = 3.0 M

Volume of solution = 0.40 L

Molarity is defined as the moles of substance divided by volume of solution in litres . It is represented by capital M. Symbolically, formula for molarity M = n/V

Using the molarity equation, is written as

[tex]M_1V_1 = M_2V_2[/tex]

Substitute all known values in above formula, 0.40 L × 3.0 M = 0.15 M × V₂

=> V₂ = 0.12/0.15 L

= 0.8 L

Hence, required value is 0.8 L.

For more information about Molarity, visit :

https://brainly.com/question/17138838

#SPJ4

To find the volume needed to dilute a 3.0 M NaOH solution with a volume of 0.40 L to a 0.15 M solution, we'll use the dilution formula:

M1V1 = M2V2

where M1 and V1 are the initial concentration and volume of the solution, and M2 and V2 are the final concentration and volume.

Here, M1 = 3.0 M, V1 = 0.40 L, and M2 = 0.15 M. We need to find V2.
3.0 M × 0.40 L = 0.15 M × V2

Now, divide both sides by 0.15 M to solve for V2:
(3.0 M × 0.40 L) / 0.15 M = V2
V2 = 8 L

So, to make a 0.15 M solution, the 3.0 M NaOH solution with a volume of 0.40 L should be diluted to a volume of 8 liters.

To know more about dilution formula:

https://brainly.com/question/30781795

#SPJ11

Energetic molecules such as NADH and ATP are often reactants of exergonic reactions.

Exergonic reactions are those that discharge energy and have a harmful Gibbs-free energy change. In these reactions, the reactants have more free energy than the products, so the excess energy is cast in the state of heat. An exergonic reaction is a chemical reaction where the shift in the free energy is negative.

Energetic molecules like NADH and ATP store energy in their chemical adhesives, which can be emitted in exergonic reactions to drive endergonic responses that need energy input. Therefore, they are usually employed as reactants in exergonic reactions.

To learn more about Exergonic reactions

https://brainly.com/question/30800156

#SPJ4

The pattern in the graph may be explained by selection for large males over small males. Large males are more successful in defending territory, so they are more likely to reproduce and pass on their genes.

Territory is an area of land, sea or airspace with a defined boundary that is under the jurisdiction of a particular state, nation or governing body. It is often used to refer to a region or area with specific political, cultural, geographical or historical characteristics. Territory can also refer to a section of a country or region, or a group of related countries or regions, that are considered to be part of a larger political entity. In international law, a territory is an area that is subject to the authority of a state, but is not considered to be part of the state itself.

Over time, this has led to an increase in the proportion of large males relative to small males, resulting in the shifted distribution shown in the graph.

To learn more about territory
https://brainly.com/question/12323102
#SPJ1

The pressure of gas is 1.05 atm when a 1.25 g sample of CO₂ is contained in a 750ml flask at 22.5°C.

Molecular weight of CO₂ is 1.25g ,Volume of CO₂ is 750ml,Temperature of CO₂ is 22.5°C and the gas constant is 0.08206 L atm/mol K.

Using the ideal gas law equation the pressure is found to be 1.05 atm.

To calculate the pressure of the gas, we can use the ideal gas law equation: [tex]PV=nRT[/tex]
Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the volume to liters by dividing by 1000: 750 ml = 0.75 L.
Next, we need to calculate the number of moles of CO₂ present in the flask. We can use the molecular weight of CO₂ to convert from grams to moles:

[tex]1.25 * (1 /44.01 ) = 0.0284 mol[/tex]
Now we can plug in the values into the ideal gas law equation:

[tex]PV=nRT[/tex]
[tex]P * 0.75 L = 0.0284 mol  * 0.08206 L*atm/mol*K * (22.5 + 273.15) K[/tex]
Simplifying and solving for P, we get:
[tex]P = (0.0284 * 0.08206 * 295.65) / 0.75 = 1.05 atm[/tex]
Therefore, the pressure of the gas in the flask is 1.05 atm.

Learn more about ideal gas law equation here:

https://brainly.com/question/15379358

#SPJ11