Cp = 0.237 J.g⁻¹.°C⁻¹ is the amount of energy required by known amount of a substance to raise its temperature by one degree is called specific heat capacity.
The equation used for this problem is as follow,
Q = m Cp ΔT ----- (1)
Where;
Q = Heat = 640 J
m = mass = 125 g
Cp = Specific Heat Capacity = ??
ΔT = Change in Temperature = 43.6 °C - 22 °C = 21.6 °C
Solving eq. 1 for Cp,
Cp = Q / m ΔT
Putting values,
Cp = 640 J / (125 g × 21.6 °C)
Cp = 0.237 J.g⁻¹.°C⁻¹
Therefore, Cp = 0.237 J.g⁻¹.°C⁻¹ is the amount of energy required by known amount of a substance to raise its temperature by one degree is called specific heat capacity.
Learn more about heat capacity on:
brainly.com/question/28302909
#SPJ1
what is the composition of the salt plates used and why should aqueous solutions never be analyzed with these salt plates?
Salt plates used in spectroscopy techniques, such as infrared spectroscopy, are typically made of alkali halide compounds like sodium chloride (NaCl), potassium bromide (KBr), or potassium chloride (KCl). These compounds are transparent in the infrared region of the electromagnetic spectrum and can be used to hold samples for analysis.
Aqueous solutions should not be analyzed with these salt plates because water can dissolve these salts. When an aqueous solution comes into contact with a salt plate, the water can dissolve the salt, leading to the formation of a liquid layer between the sample and the plate. This liquid layer can interfere with the analysis and affect the quality of the spectral data obtained.
The presence of water can introduce additional absorption bands in the infrared spectrum, making it difficult to accurately identify and analyze the functional groups present in the sample. It can also cause a loss of spectral resolution and distort the intensity of the absorption peaks. Therefore, it is important to avoid using salt plates for aqueous solutions and instead use appropriate techniques or sample holders designed for analyzing liquid samples.
Learn more about spectroscopy here:
https://brainly.com/question/13265448
#SPJ11
acetylene torches utilize the following reaction: 2 c2h2(g) 5 o2(g) → 4 co2(g) 2 h2o(g) use the given standard enthalpies of formation to calculate δ h° for this reaction
The standard enthalpy change (ΔH°) for this reaction is -1604.2 kJ/mol.
To calculate the standard enthalpy change (ΔH°) for the acetylene torch reaction, we'll use the standard enthalpies of formation (ΔHf°) for each compound involved:
ΔH° = [Σn(products) × ΔHf°(products)] - [Σn(reactants) × ΔHf°(reactants)]
In the reaction:
2 C₂H₂(g) + 5 O₂(g) → 4 CO₂(g) + 2 H₂O(g), we'll use the standard enthalpies of formation for each compound:
ΔHf°(Co₂H₂) = 226.7 kJ/mol, ΔHf°(O₂) = 0 kJ/mol, ΔHf°(CO₂) = -393.5 kJ/mol, and ΔHf°(H₂O) = -241.8 kJ/mol.
ΔH° = [(4 × -393.5) + (2 × -241.8)] - [(2 × 226.7) + (5 × 0)]
ΔH° = (-1574 - 483.6) - (453.4) = -2057.6 + 453.4 = -1604.2 kJ/mol
Learn more about enthalpy at https://brainly.com/question/16720480
#SPJ11
which of the following would lead to a shift to the left? 8 h2s(g) + 4 o2(g) ⇌ s8(s) + 8h2o(g)
Remove S8. Increase the volume. Add O2. Add a catalyst. Decrease the temperature.
A shift to the left in the given equilibrium reaction can be achieved by removing S8 or adding a catalyst.
In the given equilibrium reaction, a shift to the left means that the equilibrium position will favor the reactants (H2S and O2) over the products (S8 and H2O). This can be achieved by removing the product S8 from the system. By decreasing the concentration of S8, Le Chatelier's principle states that the equilibrium will shift to the left to compensate for the loss of S8 and maintain equilibrium.
Additionally, adding a catalyst to the system can also cause a shift to the left. A catalyst increases the rate of both the forward and reverse reactions equally. However, since the forward reaction results in the formation of products, a catalyst can facilitate the backward reaction, favoring the reactants and causing a shift to the left.
Increasing the volume, adding O2, or decreasing the temperature would result in a shift to the right, favoring the formation of products. Increasing the volume or adding O2 would increase the concentration of the reactants, while decreasing the temperature would favor the exothermic forward reaction. These changes would cause the equilibrium to shift towards the product side.
Learn more about Catalyst here:
https://brainly.com/question/12260131
#SPJ11
after 0.00440 moles of c₅h₅nh⁺ and 0.00289 moles of oh⁻ have reacted, what quantity in moles of c₅h₅nh⁺ would be left in the beaker after the reaction goes to completion?
There would be 0.00151 moles of C₅H₅NH⁺ left in the beaker after the reaction goes to completion.
To determine the quantity of C₅H₅NH⁺ left in the beaker after the reaction goes to completion, we need to find the limiting reagent first. The limiting reagent is the reactant that is completely consumed and determines the maximum amount of product that can be formed.
Let's write the balanced chemical equation for the reaction between C₅H₅NH⁺ and OH⁻:
C₅H₅NH⁺ + OH⁻ → C₅H₅N + H₂O
From the balanced equation, we can see that the stoichiometric ratio between C₅H₅NH⁺ and OH⁻ is 1:1. Therefore, the reactant with a lower number of moles is the limiting reagent.
Given:
Moles of C₅H₅NH⁺ = 0.00440 moles
Moles of OH⁻ = 0.00289 moles
Since the moles of OH⁻ are lower than the moles of C₅H₅NH⁺, OH⁻ is the limiting reagent. This means that all OH⁻ will react, and the remaining C₅H₅NH⁺ will be in excess.
Therefore, after the reaction goes to completion, all OH⁻ (0.00289 moles) will be consumed, and the amount of C₅H₅NH⁺ left in the beaker will be equal to the initial moles of C₅H₅NH⁺ minus the moles of OH⁻ used:
Moles of C₅H₅NH⁺ left = Initial moles of C₅H₅NH⁺ - Moles of OH⁻ used
= 0.00440 moles - 0.00289 moles
= 0.00151 moles
Therefore, there would be 0.00151 moles of C₅H₅NH⁺ left in the beaker after the reaction goes to completion.
Learn more about moles here:
https://brainly.com/question/30885025
#SPJ11
how many unpaired electrons are in the scandium atom? this atom is ... a. paramagnetic ... b. diamagnetic
The number of unpaired electrons in the scandium atom depends on whether it is paramagnetic or diamagnetic. If the atom is paramagnetic, it means that it has at least one unpaired electron in its outermost shell.
This is because paramagnetic materials are attracted to a magnetic field, which is caused by the unpaired electrons. On the other hand, if the atom is diamagnetic, it means that all of its electrons are paired, and it is not attracted to a magnetic field. Therefore, it does not have any unpaired electrons. Since the question does not provide any information about the electron configuration of scandium, we cannot determine whether it is paramagnetic or diamagnetic without further context.
Scandium (Sc) is a chemical element with atomic number 21. In its ground state, the electron configuration of scandium is [Ar] 3d1 4s2. There is only one unpaired electron in the 3d orbital, making the scandium atom paramagnetic. Paramagnetic substances are attracted to external magnetic fields due to the presence of unpaired electrons. On the other hand, diamagnetic substances have no unpaired electrons and are weakly repelled by magnetic fields. Since scandium has one unpaired electron, it is classified as a paramagnetic element.
To know about electrons:
https://brainly.com/question/12001116
#SPJ11
describe the molecular stucture of a liquid and add good sciency vocab
The arrangement and mobility of molecules in a fluid state, controlled by intermolecular interactions, are included in the molecular structure of a liquid.
Molecular structure of liquidsA liquid is made up of a group of particles, usually molecules, that are constantly moving and display intermolecular forces of attraction. These intermolecular forces, including hydrogen bonds, dipole-dipole interactions, and van der Waals forces, are very important in influencing the behavior and characteristics of the liquid.
Although the molecules in a liquid are closely packed, they are not organized in a predictable way like they are in a solid. Instead, they are sufficiently energetic to move past one another, giving rise to a nature that is fluid and shape-adaptive. This property enables liquids to adopt the shape of the container they are contained in.
A liquid's molecular structure is dynamic and always in motion. Although individual molecules are free to move, intermolecular forces they encounter have an impact on how they behave. Depending on the sort of molecules present and their functional groups, these forces' potency and nature can change.
Learn more on liquids here https://brainly.com/question/28554949
#SPJ1
what is the iupac name for the compound shown? (2s, 3r)-2-ethyl-3-phenyloxirane (2r, 3s)-2-ethyl-3-phenyloxirane (2s, 3s)-2-ethyl-3-phenyloxirane (2s, 3r)-3-ethyl-2-phenyloxirane
The correct IUPAC name for the compound shown is "(2S, 3R)-2-ethyl-3-phenyloxirane."
The IUPAC name for the compound shown is:
(2S, 3R)-2-ethyl-3-phenyloxirane.
The name is determined based on the stereochemistry of the molecule. The numbers 2S and 3R indicate the configuration of the substituents around the chiral centers of the oxirane (epoxide) ring.
The "2S" means that the substituents attached to the second carbon atom of the ring are oriented in a counterclockwise direction, and the "3R" means that the substituents attached to the third carbon atom of the ring are oriented in a clockwise direction.
The name also includes the substituents on the oxirane ring, which are "ethyl" and "phenyl."
Therefore, the correct IUPAC name for the compound shown is "(2S, 3R)-2-ethyl-3-phenyloxirane."
To know more about stereochemistry refer here
brainly.com/question/13266152#
#SPJ11
what component of an element is being probed in nmr
Nuclear Magnetic Resonance (NMR) is a powerful technique used to study the properties of atoms in a molecule. It is based on the magnetic properties of certain nuclei and their ability to absorb and re-emit electromagnetic radiation.
When exposed to a strong magnetic field, nuclei align themselves with the field, and when electromagnetic radiation of a specific frequency is applied, the nuclei absorb energy and transition to a higher energy level. The energy absorbed is then re-emitted, and the frequency of the transition can be used to identify the nucleus and determine its location within a molecule.
In this way, NMR can be used to study the structure, dynamics, and chemical environment of a molecule. By probing different nuclei of an element, NMR can provide detailed information about the structure and function of the molecule, which is invaluable for a variety of research and industrial applications.
know more about Nuclear Magnetic Resonance here
https://brainly.com/question/30429613#
#SPJ11
The molar absorptivities of the indicator weak acid HIn (K_{a} = 1.42 * 10 ^ - 5) and its conjugate base In at 570 were determined as epsilon(HIn) = 7120 and ε(In) = 961. The optical length b = 1.00 cm. (a) What is the absorbance of an unbuffered indicator solution having total indicator concentration 8.0 * 10 ^ - 5 (b) What is the absorbance of a buffered indicator solution having total indicator concentration 8.0 * 10 ^ - 5 and pH = 6.5 .
The absorbance of the buffered indicator solution can be calculated using the equation above.
To calculate the absorbance of an unbuffered indicator solution and a buffered indicator solution, we need to use the Beer-Lambert Law, which relates the absorbance (A) of a solution to the molar absorptivity (ε), the path length (b), and the concentration (c) of the absorbing species.
The Beer-Lambert Law can be written as:
A = ε * b * c
Given:
ε(HIn) = 7120 M^(-1)cm^(-1)
ε(In) = 961 M^(-1)cm^(-1)
b = 1.00 cm
Total indicator concentration = 8.0 * 10^(-5) M
(a) For an unbuffered indicator solution:
We need to calculate the absorbance using the molar absorptivity of the weak acid form (HIn).
c(HIn) = Total indicator concentration = 8.0 * 10^(-5) M
A(HIn) = ε(HIn) * b * c(HIn)
= 7120 M^(-1)cm^(-1) * 1.00 cm * 8.0 * 10^(-5) M
= 0.5696
Therefore, the absorbance of the unbuffered indicator solution is 0.5696.
(b) For a buffered indicator solution:
To calculate the absorbance, we need to consider the equilibrium between the weak acid form (HIn) and its conjugate base (In) using the Henderson-Hasselbalch equation:
pH = pKa + log([In]/[HIn])
Given:
pH = 6.5 (buffered solution)
K_a = 1.42 * 10^(-5)
From the Henderson-Hasselbalch equation, we can solve for the ratio [In]/[HIn]:
[In]/[HIn] = 10^(pH - pKa)
= 10^(6.5 - (-log10(K_a)))
= 10^(6.5 + 5.85)
= 10^(12.35)
Since [HIn] + [In] = Total indicator concentration, we can express [HIn] in terms of [In]:
[HIn] = Total indicator concentration / (1 + [In]/[HIn])
= Total indicator concentration / (1 + 10^(12.35))
Substituting the values into the Beer-Lambert Law equation for the buffered solution:
A = ε(HIn) * b * [HIn]
= 7120 M^(-1)cm^(-1) * 1.00 cm * (Total indicator concentration / (1 + 10^(12.35)))
A = 7120 M^(-1)cm^(-1) * 1.00 cm * (8.0 * 10^(-5) M / (1 + 10^(12.35)))
Therefore, the absorbance of the buffered indicator solution can be calculated using the equation above.
Learn more about indicator here:
https://brainly.com/question/12489874
#SPJ11
what element is being oxidized in the following redox reaction c3h8o2 kmn04
In order to determine the element being oxidized in the redox reaction, we need the complete balanced equation for the reaction.
The given information "C3H8O2 + KMnO4" is not a balanced equation and lacks the products and reaction conditions.
To identify the element being oxidized, we need to compare the oxidation states of the elements before and after the reaction. In a redox reaction, oxidation involves an increase in oxidation state, while reduction involves a decrease in oxidation state.
Please provide the complete balanced equation for the reaction, including the products and any other relevant information, so I can assist you in determining the element being oxidized.
Know more about redox reaction here:
https://brainly.com/question/28300253
#SPJ11
which of the following bonds is probably the most polar? group of answer choices c—h in ch4 p—h in ph3 o—h in h2o n—h in nh3 se—h in seh2
The most polar bond among the given options is the O—H bond in [tex]H_2O[/tex](water).
Polarity in a bond is determined by the electronegativity difference between the atoms involved. Electronegativity is a measure of an atom's ability to attract electrons towards itself in a chemical bond. In the case of the O—H bond in water ([tex]H_2O[/tex]), oxygen (O) is significantly more electronegative than hydrogen (H). Oxygen has an electronegativity value of approximately 3.44, while hydrogen has an electronegativity value of approximately 2.20.
The electronegativity difference between oxygen and hydrogen in water is relatively large compared to the other options given. This significant electronegativity difference results in a highly polar O—H bond. Oxygen attracts the shared electrons in the bond more strongly than hydrogen, creating a partial negative charge (δ-) on the oxygen atom and a partial positive charge (δ+) on the hydrogen atoms. Therefore, the O—H bond in H2O (water) is the most polar bond among the given options.
Learn more about Polarity here:
https://brainly.com/question/29206689
#SPJ11
Which of the following fluids should be administered slowly to prevent circulatory overload? A)0.9% NaCl B)0.45% NaCl C)Dextrose 5% D)5% NaCl
The correct option is D).
When considering fluid administration, it's important to be aware of the tonicity of the solution. Tonicity refers to the relative concentration of solutes in a solution compared to the concentration of solutes in the bloodstream.
Option A) 0.9% NaCl, also known as normal saline or isotonic saline, has a concentration similar to that of the blood. It is commonly used for fluid resuscitation and does not typically cause circulatory overload when administered at a moderate rate.
Option B) 0.45% NaCl, also known as half-normal saline or hypotonic saline, has a lower concentration than the blood. While it can be used in certain situations, such as to provide free water replacement, it can cause fluid to move into the cells and potentially lead to cellular swelling. Therefore, it should be administered with caution and not in large volumes or rapidly.
Option C) Dextrose 5% is a solution containing glucose, a sugar. It is considered isotonic in terms of tonicity. Dextrose solutions are often used to provide calories and serve as a source of energy. However, when administered rapidly in large volumes, they can lead to an increase in blood glucose levels. While it may not directly cause circulatory overload, it's important to monitor glucose levels and administer dextrose solutions appropriately.
Option D) 5% NaCl, also known as hypertonic saline, has a higher concentration than the blood. When administered rapidly or in large volumes, hypertonic saline can draw fluid from the cells and tissues into the bloodstream, potentially leading to circulatory overload. Therefore, it should be administered slowly and with caution.
In summary, of the options provided, D) 5% NaCl should be administered slowly to prevent circulatory overload.
To know more about fluid refer here
https://brainly.com/question/6329574#
#SPJ11
Consider the following species when answering the following questions:
(i) BCl3 (ii) CCl4 (iii) TeCl4 (iv) XeF4 (v) SF6
Which of the molecules has a square planar shape?
(ii) and (iv)
(i) and (ii)
(i) and (v)
(iv) only
The molecule that has a square planar shape is (iv) XeF4. Square planar geometry occurs when a central atom is surrounded by four bonded atoms and two lone pairs, resulting in a flat, square shape. Among the given species, XeF4 meets this criteria.
In XeF4, xenon (Xe) is the central atom surrounded by four fluorine (F) atoms and two lone pairs of electrons. The four fluorine atoms are arranged in a square plane around the central xenon atom, with the two lone pairs occupying the remaining axial positions. This arrangement satisfies the requirements for a square planar geometry.
The other molecules listed do not exhibit square planar shapes. BCl3 (i) has a trigonal planar shape, CCl4 (ii) has a tetrahedral shape, TeCl4 (iii) has a distorted tetrahedral shape, and SF6 (v) has an octahedral shape. Only XeF4 (iv) possesses the necessary arrangement of atoms and lone pairs to exhibit a square planar geometry.
Learn more about molecule here:
https://brainly.com/question/30465503
#SPJ11
if a proton is in an infinite box in the 7 state and its energy is 0.356, what is the wavelength of this proton (in )?
The wavelength of the proton in the 7th state of an infinite box, with an energy of 0.356, is approximately 4.646 × 10⁻¹² meters.
Determine the wavelength?In quantum mechanics, the wavelength of a particle can be determined using the de Broglie wavelength equation: λ = h / p, where λ is the wavelength, h is the Planck's constant (6.626 × 10⁻³⁴ J⋅s), and p is the momentum of the particle.
In an infinite box, the allowed energy levels are given by the equation: E = (n²π²ħ²) / (2mL²), where E is the energy, n is the quantum number, π is pi, ħ is the reduced Planck's constant (h / 2π), m is the mass of the particle, and L is the size of the box.
The quantum number (n) corresponds to the state of the particle. Given that the proton is in the 7th state with an energy of 0.356, we can rearrange the energy equation to solve for L, and then substitute the value of L in the de Broglie wavelength equation to find the wavelength.
Therefore, the calculation yields a wavelength of approximately 4.646 × 10⁻¹² meters.
To know more about wavelength, refer here:
https://brainly.com/question/31143857#
#SPJ4
Which type of study would be best suited as a substitute for a risky controlled experiment? (1 point)
A. A simulation
B. A field study
C. Systematic observations
D. The scientific method
A simulation is a type of study that is best suited as a substitute for a risky controlled experiment. Option A is Correct.
Field studies and systematic observations are also useful methods for studying natural phenomena, but they are not as good substitutes for controlled experiments as simulations. Field studies and systematic observations are more like observational studies, they are used to collect data on natural phenomena, but they do not allow for the control of all variables, which makes it difficult to isolate the specific effects of the variables of interest.
The scientific method is a systematic approach to studying the natural world that involves making observations, forming hypotheses, and testing predictions through experimentation. The scientific method is a useful way to understand natural phenomena, but it is not always possible or practical to conduct controlled experiments, and in those cases, simulations, field studies, and systematic observations can be used as alternatives.
Learn more about simulation visit: brainly.com/question/31764333
#SPJ4
subunits of protein x are linked covalently by bonds between the:
Subunits of protein x are linked covalently by bonds between the amino acids.
Proteins are made up of long chains of amino acids that are linked together by peptide bonds. These amino acids act as the subunits of the protein, and the sequence of these amino acids determines the structure and function of the protein. The covalent bonds between these amino acids are formed through a process called dehydration synthesis, in which a molecule of water is removed from two amino acids to create a peptide bond. This process continues until the entire protein is formed, with each subunit connected to the next by a peptide bond. The resulting protein can have a complex three-dimensional structure, allowing it to perform specific functions in the body.
To know more about amino acids visit:
https://brainly.com/question/31872499
#SPJ11
You will need to draw the Lewis structure of PF3 in theprocess of answering this question.
a) How many shared pairs are in this molecule? ........ ype a number, not a word.
b) How many lone pairs are on the phosphorus atom? ....... Type a number, not a word.
c) What is the P/F bond order? ........ Type a number, not aword.
The Lewis structure of PF3 can be represented as follows:
P: 5 valence electrons
F: 7 valence electrons each (3 F atoms, total of 21 valence electrons)
To determine the number of shared pairs in the molecule, you need to calculate the total number of valence electrons and distribute them among the atoms. In this case, we have 5 valence electrons for phosphorus and 21 valence electrons for fluorine, giving us a total of 26 valence electrons.
a) To distribute the electrons, we place the least electronegative atom, phosphorus (P), in the center. We then connect the three fluorine (F) atoms to phosphorus using single bonds:
F F
\ /
P
Each bond (single bond) represents a shared pair of electrons. Since there are three bonds in the structure, there are 3 shared pairs.
b) After forming the bonds, we assign the remaining valence electrons as lone pairs. In this case, there are 26 - 3(2) = 26 - 6 = 20 electrons remaining.
Since lone pairs are placed on individual atoms, the number of lone pairs on the phosphorus atom is 0.
c) The bond order between phosphorus and fluorine can be calculated by dividing the total number of shared pairs (bonds) by the number of bonds. In this case, there are 3 shared pairs and 3 bonds, so the bond order is 3/3 = 1.
To summarize:
a) The number of shared pairs in the molecule PF3 is 3.
b) The number of lone pairs on the phosphorus atom in PF3 is 0.
c) The P/F bond order in PF3 is 1.
Learn more about Lewis structure here:
https://brainly.com/question/20300458
#SPJ11
Which of the following reactions is a redox reaction? (a) K2CrO4 + BaCl2 → BaCro, + 2KCI (b) Pb22+ + 2Br-, 2PbBr (c) Cu + S → CuS [A] a only [B] b only C] c only [D] a and c E] b and c
The answer is option D: a and c.
In option a, K2CrO4 is oxidized to BaCrO4, and BaCl2 is reduced to 2KCl.
In option c, Cu is oxidized to CuS, and S is reduced to CuS.
To know more about oxidized refer here
brainly.com/question/13182308#
#SPJ11
At a given temperature, 5.42 atm of F2 and 3.87 atm of Br2 are mixed and allowed to come to equilibrium. The equilibrium pressure of BrF is found to be 1.42 atm. Calculate Kp for the reaction at this temperature.
F2(g) + Br2(g) <=> 2 BrF(g). Give answer to 3 decimal places.
The equilibrium constant for the given reaction at the given temperature is 0.478.
To calculate Kp for the given reaction, we first need to write the balanced equation and the expression for Kp:
F2(g) + Br2(g) <=> 2BrF(g)
Kp = (PBrF)^2 / (PF2 x PBr2)
Here, PBrF, PF2, and PBr2 are the partial pressures of BrF, F2, and Br2, respectively, at equilibrium. We are given the initial partial pressures of F2 and Br2, as well as the equilibrium pressure of BrF.
To determine the equilibrium partial pressures of F2 and Br2, we can use the stoichiometry of the reaction and the ideal gas law.
Let x be the equilibrium concentration of BrF. Then, the equilibrium concentrations of F2 and Br2 will be (5.42 - x) and (3.87 - x), respectively.
Using the ideal gas law, we can write:
PF2 = (5.42 - x) * (RT/V) and PBr2 = (3.87 - x) * (RT/V)
where R is the gas constant, T is the temperature in kelvin, and V is the volume.
At equilibrium, the total pressure is given by:
Ptotal = PF2 + PBr2 + PBrF = 5.42 + 3.87 + 1.42 = 10.71 atm
Substituting the partial pressures into the expression for Kp, we get:
Kp = (1.42)^2 / [(5.42 - x) * (3.87 - x)]
Simplifying and solving for x, we get:
x = 1.92 atm
Substituting x back into the expressions for PF2 and PBr2, we get:
PF2 = 3.50 atm and PBr2 = 1.95 atm
Finally, substituting all the partial pressures into the expression for Kp, we get:
Kp = (1.42)^2 / (3.50 x 1.95) = 0.478
Therefore, the equilibrium constant for the given reaction at the given temperature is 0.478 (to 3 decimal places).
To know more about equilibrium constant visit: https://brainly.com/question/28559466
#SPJ11
he complete combustion of naphthalene (c10h8) requires oxygen and will produce carbon dioxide and water
T/F
The complete combustion of naphthalene (C10H8) can be represented by the following balanced chemical equation:
C10H8 + 12O2 → 10CO2 + 4H2O
In this reaction, naphthalene reacts with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O).
The balanced equation indicates that for every molecule of naphthalene (C10H8), 12 molecules of oxygen (O2) are required to form 10 molecules of carbon dioxide (CO2) and 4 molecules of water (H2O). This reaction is exothermic and releases energy in the form of heat and light.
To know more about naphthalene refer here
https://brainly.com/question/1387132#
#SPJ11
120 grams of calcium nitrite ca(no2)2 is dissolved in a 240 ml solution. what is the molarity of the solution? report your answer to two significant figures.
The molarity of the solution is 2.50 M (reported to two significant figures).
To find the molarity of the solution, we need to calculate the number of moles of calcium nitrite (Ca(NO2)2) and then divide it by the volume of the solution in liters.
First, we need to calculate the number of moles of calcium nitrite:
Mass of calcium nitrite (Ca(NO2)2) = 120 grams
Molar mass of Ca(NO2)2 = (40.08 g/mol + 2 * (14.01 g/mol + 16.00 g/mol)) * 2
= (40.08 g/mol + 2 * 30.02 g/mol) * 2
= (40.08 g/mol + 60.02 g/mol) * 2
= 100.10 g/mol * 2
= 200.20 g/mol
Number of moles = Mass / Molar mass
= 120 g / 200.20 g/mol
= 0.5994 mol
Next, we need to calculate the volume of the solution in liters:
Volume = 240 ml = 240/1000 L = 0.240 L
Finally, we can calculate the molarity (M) using the formula:
Molarity (M) = Number of moles / Volume
= 0.5994 mol / 0.240 L
= 2.50 M
Therefore, the molarity of the solution is 2.50 M (reported to two significant figures).
Learn more about molarity here:
https://brainly.com/question/2817451
#SPJ11
which of the following acids has the lowest ph? a. 0.1 m ha, pka = 4.55 b. 0.1 m hst, pka = 11.89 c. 0.1 m hmo, pka = 8.23 d. 0.1 m hbo, pka = 2.43 e. pure water
Among the given options, the acid that has the lowest pH is d. 0.1 M HBo, pKa = 2.43.What is pH? The degree of acidity or alkalinity of a solution is referred to as pH.
It can be measured on a scale of 0 to 14, with values below 7 indicating an acidic solution, values of 7 indicating a neutral solution, and values above 7 indicating an alkaline solution. What is pKa? The strength of an acid is measured using pKa. pKa is defined as the negative logarithm of the acid dissociation constant (Ka). Lower pKa values indicate stronger acids, whereas higher pKa values indicate weaker acids.How to determine the lowest pH acid?The lower the pKa of an acid, the stronger it is. The lower the pH, the greater the hydrogen ion concentration [H+]. Let's look at each acid's pKa value and see which one has the lowest pH.0.1 M HA, pKa = 4.55[H+] = √(Ka * C) = √(10^-4.55 * 0.1) = 1.27 * 10^-3pH = -log[H+] = -log(1.27 * 10^-3) = 2.89 (approx)0.1 M HST, pKa = 11.89[H+] = √(Ka * C) = √(10^-11.89 * 0.1) = 1.07 * 10^-6pH = -log[H+] = -log(1.07 * 10^-6) = 5.97 (approx)0.1 M HMO, pKa = 8.23[H+] = √(Ka * C) = √(10^-8.23 * 0.1) = 1.83 * 10^-5pH = -log[H+] = -log(1.83 * 10^-5) = 4.74 (approx)0.1 M HBO, pKa = 2.43[H+] = √(Ka * C) = √(10^-2.43 * 0.1) = 4.98 * 10^-2pH = -log[H+] = -log(4.98 * 10^-2) = 1.30 (approx)Therefore, the acid that has the lowest pH is d. 0.1 M HBo, pKa = 2.43.
To know more about aqueous solution visit:
https://brainly.com/question/29830719
#SPJ11
the reaction tube is chilled near the end of the reaction time to:
Chilling the reaction tube near the end of the reaction time serves multiple purposes in certain reactions.
Firstly, lowering the temperature helps to slow down or halt the reaction. Many chemical reactions are temperature-dependent, meaning that they proceed at a faster rate at higher temperatures. By chilling the reaction tube, the kinetic energy of the reactant molecules is reduced, resulting in slower collision rates and a decreased reaction rate. This can be useful when precise control over the reaction time or the extent of the reaction is desired. Secondly, cooling the reaction tube can aid in the preservation of sensitive compounds or products. Some reactions may generate heat as an exothermic byproduct, and excessive heat can cause undesired side reactions or decomposition of the desired product. By cooling the reaction tube, the temperature is kept under control, minimizing the risk of unwanted reactions or product degradation.
Overall, chilling the reaction tube near the end of the reaction time allows for better control over the reaction rate and temperature, enabling researchers to manipulate the reaction conditions and enhance the yield and purity of the desired product.
To learn more about Exothermic reaction click here; brainly.com/question/3971357
#SPJ11
a+lead-tin+alloy+of+composition+40+wt%+sn-60+wt%+pb+(animated+figure+9.8)+is+slowly+heated+from+a+temperature+of+150°c+(300°f).
The lead-tin alloy with a composition of 40% Sn,60% Pb will undergo thermal expansion before gradually melting as it is slowly heated from a temperature of 150°C (300°F) to its melting point of approximately 183°C (361°F). Once fully melted, the alloy will be in a liquid state and will continue to heat up as more energy is added to the system.
How does the lead-tin alloy behave when heated?
As the alloy of composition 40% Sn,60% Pb, is slowly heated from a temperature of 150°C (300°F), several changes can occur in the material.
Firstly, the alloy will start to undergo thermal expansion, meaning its dimensions will increase slightly with the increase in temperature. As the temperature rises further, the alloy will eventually reach its melting point, which for this alloy is around 183°C (361°F).
At this point, the alloy will begin to melt, transitioning from a solid to a liquid phase. This melting process will occur gradually, with the alloy remaining in a partially solid state until the temperature reaches the melting point.
Once the alloy is fully melted, it will be in a liquid state and will continue to heat up as more energy is added to the system. The specific heat capacity of the alloy will determine how much energy is required to raise its temperature.
Overall, the behavior of the alloy as it is heated will depend on several factors, including its composition, thermal properties, and the rate at which it is heated.
Learn more about: Alloy
brainly.com/question/1759694
#SPJ11
Choose all answers that apply. A solution has an [H+] concentration of 9.2 x 10-11.
We are aware that not every acid or base reacts with a chemical compound at the same pace. Some people react very strongly, some people mildly, and some people don't react at all. In most cases, the strength of acids and bases is quantified using their pH values. Here the pH is 10.03.
The hydrogen ion concentration in the solution is displayed inversely on the pH scale, which is logarithmic. More exactly, the pH of a solution is equal to its hydrogen ion concentration in moles per litre divided by its negative logarithm to base 10.
The equation of pH is given as:
pH = -log [H₃O⁺]
pH = -log[9.2 x 10⁻¹¹] = 10.03
To know more about pH, visit;
https://brainly.com/question/27945512
#SPJ1
Your question is incomplete, most probably your full question was:
A solution has an [H+] concentration of 9.2 x 10-11. What is pH?
draw the organic product of the bromination of ethane in a limited supply of bromine.
The reaction of ethane with bromine in a limited supply of bromine would produce bromoethane. The reaction involves the replacement of one of the hydrogen atoms in ethane with a bromine atom. The reaction is as follows:
CH3CH3 + Br2 → CH3CH2Br + HBr
Thus, the organic product of the bromination of ethane in a limited supply of bromine is bromoethane (CH3CH2Br).
To know more about bromination refer here
https://brainly.com/question/1663262#
#SPJ11
a saturated aqueous solution of sucrose, c12h22o11, contains 525 g of sucrose (molar mass 342) per 100. g of water. what is the c12h22o11/h2o molecular ratio in this solution?
To determine the C12H22O11/H2O molecular ratio in a saturated aqueous solution of sucrose containing 525 g of sucrose (molar mass 342) per 100 g of water, follow these steps:
1. Calculate the moles of sucrose (C12H22O11) in the solution:
Moles of sucrose = mass of sucrose / molar mass of sucrose
Moles of sucrose = 525 g / 342 g/mol ≈ 1.535 moles
2. Calculate the moles of water (H2O) in the solution:
Molar mass of water = 18 g/mol
Moles of water = mass of water / molar mass of water
Moles of water = 100 g / 18 g/mol ≈ 5.556 moles
3. Determine the molecular ratio of sucrose to water:
Molecular ratio = moles of sucrose / moles of water
Molecular ratio = 1.535 moles / 5.556 moles ≈ 0.276
Thus, the C12H22O11/H2O molecular ratio in this saturated aqueous solution of sucrose is approximately 0.276.
To know more about sucrose refer here
https://brainly.com/question/31817670#
#SPJ11
ΔH∘rxn= 84 kJ , ΔSrxn= 144 J/K , T= 303 K Express your answer using two significant figures. ΔSuniv = A. Given the values of ΔH∘rxn, ΔS∘rxn, and T ...
ΔH∘rxn= 84 kJ , ΔSrxn= 144 J/K , T= 303 K Express your answer using two significant figures. ΔSuniv = - 133 j/k
ΔH∘rxn (Change in Enthalpy): ΔH∘rxn represents the change in enthalpy (heat) for a chemical reaction occurring at constant pressure. It indicates the difference in energy between the reactants and the products. In this case, it was given as 84 kJ (kilojoules). ΔSrxn (Change in Entropy): ΔSrxn represents the change in entropy for a chemical reaction. Entropy is a measure of the randomness or disorder of a system. The change in entropy indicates how the disorder of the system changes during the reaction. In this case, it was given as 144 J/K (joules per kelvin) (Temperature): T represents the temperature of the system, typically measured in Kelvin (K). Temperature affects the energy transfer in a reaction and is used to calculate the change in entropy of the universe. ΔSuniv (Change in Entropy of the Universe): ΔSuniv represents the change in entropy of the universe. It takes into account both the change in entropy of the reaction (ΔSrxn) and the heat transfer (ΔHrxn) with respect to the temperature (T). The equation used to calculate ΔSuniv is ΔSuniv = ΔSrxn – ΔHrxn/T
By plugging in the given values for ΔH∘rxn, ΔSrxn, and T into the equation, we can determine the change in entropy of the universe (ΔSuniv).
To calculate the change in entropy of the universe (ΔSuniv), we can use the equation:
ΔSuniv = ΔSrxn - ΔHrxn/T
Given the values:
ΔH∘rxn = 84 kJ (convert to J by multiplying by 1000: 84,000 J)
ΔSrxn = 144 J/K
T = 303 K
Let's plug in these values into the equation:
ΔSuniv = 144 J/K - (84,000 J) / (303 K)
Calculating this expression:
ΔSuniv = 144 J/K - 277.227 J/K
ΔSuniv ≈ -133 J/K
Therefore, the value of ΔSuniv, expressed using two significant figures, is approximately -133 J/K.
Learn more about Entropy here:
https://brainly.com/question/23174507
#SPJ11
A solution of NaI dissolved in water would contain mainly: 1. Na+ ions, I- ions, and intact water molecules. 2. intact NaI molecules and intact water molecules. 3. intact NaOH molecules and intact HI molecules. 4. NaI would not dissolve in water. 5. Na+ ions, I- ions, H+ ions, and OH- ions
Answer:
A solution of NaI dissolved in water would contain mainly: Na+ ions, I- ions, and intact water molecules.
Explanation:
When NaI (sodium iodide) dissolves in water, it dissociates into its component ions, Na+ (sodium cation) and I- (iodide anion), due to the polar nature of water. The positive end of the water molecule (hydrogen end) attracts the negative I- ion, while the negative end of the water molecule (oxygen end) attracts the positive Na+ ion. The ions become surrounded by water molecules and are held in solution by the solvent-solute interactions.
Therefore, a solution of NaI dissolved in water would contain mainly Na+ ions, I- ions, and intact water molecules, as described in option 1. The intact NaI molecules do not persist in solution and instead dissociate into their respective ions, which then interact with the solvent molecules.
Option 2 is incorrect because NaI dissociates into its component ions when dissolved in water, and therefore, the solution would not contain intact NaI molecules.
Option 3 is incorrect because NaOH and HI are not present in the original mixture, and they cannot be formed by the dissolution of NaI in water.
Option 4 is incorrect because NaI is a water-soluble ionic compound, and it can dissociate into its component ions when dissolved in water.
Option 5 is incorrect because while water can undergo autoionization to produce H+ (hydronium) and OH- (hydroxide) ions, the presence of NaI does not significantly alter the concentrations of these ions in the solution.
Learn more about solutions here, https://brainly.com/question/25326161
#SPJ11
how many grams of iron (iii) oxide are produced when 14.5 g of iron reacts with 5.2 g oxygen to produce iron (iii) oxide?
As a result, when 14.5 g of iron and 5.2 g of oxygen combine, 57.05 g of iron (III) oxide is created.
What is an oxide?Oxides comprise binary substances created when oxygen reacts with additional substances. In nature, oxygen is quite reactive. Oxides are created when they interact with metallic and non-metals. Any member of the diverse and significant group of chemical compounds known as oxides, where oxygen is coupled with an additional component
The following equation can be used to determine how many grammes of iron (III) oxide are created when 14.5 grammes of iron react with 5.2 grammes of oxygen:
Iron (III) oxide is equal to 14.5 g of iron times 1 mole of iron divided by 55.845 g of iron, 1 mole of oxygen divided by 16.00 g of oxygen, and 160.186 g of iron (III) oxide per 1 mole of oxygen.
Iron (III) oxide, 57.05 g
Learn more about oxide, here:
https://brainly.com/question/376562
#SPJ4