Answer:
[tex]\Delta G_{rxn}=42.7\frac{kJ}{mol}[/tex]
Explanation:
In this case, for the dissociation of hypochlorous acid, we know that the acid dissociation constant (Ka) is 2.9x10⁻⁸, which is related with the Gibbs free energy as shown below:
[tex]\Delta G_{rxn}=-RTln(K)[/tex]
But in this case K is just Ka, therefore, at 296 K, it turns out:
[tex]\Delta G_{rxn}=-8.314\frac{J}{mol*K}*296K*ln(2.9x10^{-8})\\\\\Delta G_{rxn}=42.7\frac{kJ}{mol}[/tex]
Such result, means that the reaction is nonspontaneous at the given temperature, it means it is not favorable (not easily occurring).
Best regards.
The migration of atoms or molecules through a material is called Choose one: biomineralization. precipitation from a gas. solidification of a melt. diffusion.
Answer:
diffusion
Explanation:
Diffusion is the movement of particles from a region of higher concentration to a region of lower concentration in response to a concentration gradient. A concentration gradient simply means a difference in concentration.
Diffusion occurs in solids,liquids and gases. Diffusion is fastest in gases and slowest in solids. Diffusion of solid particles may take very many years while diffusion of gases takes a few milliseconds depending on the mass of the gas.
In materials, atoms and molecules also move from one part of the material to another. This is also refereed to as diffusion.
What does the state symbol (aq) mean when written after a chemical
compound in a chemical equation?
A. It means the compound is in the liquid phase.
B. It means the compound is dissolved in water.
C. It means the compound is in the gas phase.
D. It means the compound is in the solid phase.
B. it means the compound is dissolved in water
Answer:
b
Explanation:
a p e x :)
Calculate the mass of feso4 that would be produced by 0.5mole of Fe
Answer:76 grams
Explanation:
Fe+H₂SO₄-->FeSO₄+H₂
For one mole of Fe we get 1 mole of feso4, therefore for 0.5 moles of Fe we get 0.5 moles of feso4.
The molar mass of feso4 is AFe+AS+4AO(A is atomic mass)
56+32+4*16=152grams/mole
Now, we need to multiply the number of moles by the molar mass to get the mass that reacts
152*0.5=76 grams
Which of the following reagents should be used to convert to Question 2 options: A) Na, NH3 B) H2, Pt C) H2, Lindlar's catalyst D) HgSO4, H2O
Answer:
A
Explanation:
If we intend to achieve the anti addition of Hex-3-yne to yield (E) Hex-3-ene, the we must use Na/NH3. The first step of the reaction involves the transfer of an electron from sodium to the alkene; this yields a radical anion. Strong electron replusion ensues between the single electron and the lone pair on the carbon. This now forces the both to be found at a trans position to each other and this is the basis of the stereochemistry of the product.
Secondly, the radical anion abstracts a proton from ammonia. Another sodium atom transfers an electron leading to the formation of a vinyl carbanion, the alkyl groups are now trans to each other.
This carbanion now abstracts a proton from ammonia and the final product is formed.
g The combustion of ethylene proceeds by the following reaction: C2H4(g) + 3 O2(g) → 2 CO2(g) + 2 H2O(g) If the rate of O2 is -0.23 M/s, then what is the rate (in M/s) of disappearance of C2H4?
Answer:
Explanation:
C₂H₄(g) + 3O₂(g) → 2CO₂(g) + 2H₂O(g)
In this reaction we see that 3 moles of O₂ reacts with one mole of C₂H₄ .
Hence rate of disappearance of O₂ is 3 times faster .
- d [O₂] / dt = - 3 d [ C₂ H₄ ] / dt
Putting the given value
.23 = 3 d [ C₂ H₄ ] / dt
d [ C₂ H₄ ] / dt = .23 / 3
= .077 M / s
Hence the rate of disappearance of C₂ H₄ is .077 moles / s .
The following balanced equation describes the reduction of iron(III) oxide to molten iron within a blast furnace: Fe2O3(s) + 3CO(g) ---> 2Fe(l) + 3CO2(g) Steve inserts 450. g of iron(III) oxide and 260. g of carbon monoxide into the blast furnace. After cooling the pure liquid iron, Steve determines that he has produced 288g of iron ingots. What is the theoretical yield of liquid iron, in grams? Just enter a numerical value. Do not enter units.
Answer: 313.6
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} Fe_2O_3=\frac{450g}{160g/mol}=2.8moles[/tex]
[tex]\text{Moles of} CO=\frac{260g}{28g/mol}=9.3moles[/tex]
[tex]Fe_2O_3(s)+3CO(g)\rightarrow 2Fe(l)+3CO_2(g)[/tex]
According to stoichiometry :
1 mole of [tex]Fe_2O_3[/tex] require 3 moles of [tex]CO[/tex]
Thus 2.8 moles of [tex]Fe_2O_3[/tex] will require=[tex]\frac{3}{1}\times 2.8=8.4moles[/tex] of [tex]CO[/tex]
Thus [tex]Fe_2O_3[/tex] is the limiting reagent as it limits the formation of product and [tex]CO[/tex] is the excess reagent.
As 1 mole of [tex]Fe_2O_3[/tex] give = 2 moles of [tex]Fe[/tex]
Thus 2.8 moles of [tex]Fe_2O_3[/tex] give =[tex]\frac{2}{1}\times 2.8=5.6moles[/tex] of [tex]Fe[/tex]
Mass of [tex]Fe=moles\times {\text {Molar mass}}=2.6moles\times 56g/mol=313.6g[/tex]
Theoretical yield of liquid iron is 313.6 g
Current is described as
A. moles of electrons.
B. the flow of electrons through a substance.
C. electricity.
D. the flow of ions through a substance.
Answer:
B!
Explanation:
I got it right in class!
Which of the following is an important intermediate in the mechanism of the reaction
in the box?
Answer:
Explanation:
.
Treatment of 1 mole of dimethyl sulfate with 2 moles of sodium acetylide results in the formation of propyne as the major product.
A) Draw a reasonable mechanism accounting for the formation of the byproduct 2-butyne.
B) 2-Butyne is observed as a minor product of this reaction. Draw a mechanism accounting for the formation of this minor product and explain how your proposed mechanism is consistent with the observation that acetylene is present among the reaction products.
C) Predict the major and minor products that are expected if diethyl sulfate is used in place of dimethyl sulfate.
Answer:
(a) appended underneath is the inorganic ion shaped in the reaction and the mechanism of its formation
(b) 2-butyne framed as a minor product is appeared in the connection. It is shaped when the monosodium subordinate of dimethylsulphoxide gets a hydrogen from the propyne and reacts again with monosodium methylsulphoxide.
(c) The major product framed when diethylsulphoxide is utilized, would be butyne and minor product would be 3-hexyne.
Explanation:
attached below is diagram
What is the molar mass of a protein if a solution of 0.020 g of the protein in 25.0 mL of solution has an osmotic pressure of 0.56 torr at 25 ∘ C
Answer:
26.5 kD
Explanation:
Here we can apply the formula ∏ = iMRT, where ∏ = osmotic pressure = 0.56 - ( given ). This is only one part of the information we are given / can conclude in this case ....
i = van’t Hoff factor = 1 for a protein molecule,
R = gas constant = 62.36 L torr / K-mol,
T ( temperature in Kelvin ) = 25 + 273 - conversion factor C° + 273 = 298K
( Known initially ) ∏ = osmotic pressure = 0.56 torr
..... besides the part " M " in the formula, which we have no information on whatsoever, as we have to determine it's value.
_____
Substitute derived / known values to solve for M ( moles / liter ) -
∏ = iMRT
⇒ 0.56 = ( 1 )( M )( 62.36 )( 298 )
⇒ 0.56 = M( 18583.28 )
⇒ M = 0.56 / 18583.28 ≈ 0.00003013461 ....
_____
We know that M = moles / liter, so we can use this to solve for moles, and hence calculate the molar mass by the formula molar mass = g / mol -
M = mol / l
⇒ 0.00003013461 = 0.020 / 25 mL ( 0.025 L ),
0.020 / 0.025 = 0.8 g / L
⇒ 0.8 g = 0.00003013461 moles,
molar mass = 0.8 g / 0.00003013461 moles = 26,548 g / mol = 26.5 kD
16. A metal element and a non-metal element are brought near each other and allowed to react. What's the most likely type of compound
that will form between these two elements?
A. lonic and covalent
B. lonic
C. Covalent
D. Neither, metals and non-metals don't react.
Answer:
B) Ionic
Explanation:
During which part of the scientific method would error bars be used?
A. Conclusion
B. Analysis
C. Hypothesis
D. Research
please helppppppppppp
Answer:
The correct answer is B. Analysis
Explanation:
Error bars are part of the statistical analysis in the scientific method. Once the scientist have collected the data, he or she proceed to the data analysis. A very common way of comparing the data variability is to use error bars in ghaphical representations. From these bars, it can be estimated the error of a determination and experimental groups are compared.
The error bars would be used during B. Analysis.
What is an Error Bar?A blunders bar is a line through a factor on a graph, parallel to one of the axes, which represents the uncertainty or variant of the corresponding coordinate of the point. In IB Biology, the error bars most often represent the same old deviation of an information set.
When would error bars be used?Blunders bars can be used to examine visual quantities if various other situations preserve. This can decide whether or not differences are statistically sizable. Mistake bars can also propose the goodness of match of a given characteristic, i.e., how well the function describes the facts.
Learn more about error bars here: https://brainly.com/question/1413254
#SPJ2
Which of the following properties should carbon (C) have based on its position on
the periodic table?
A. Shiny
B. Dense
C. Malleable
D. Poor conductor
Answer:
D- poor conductor
Explanation:
metallic properties decrease as we go on the right of the periodic table. Carbon is a non metal hence it is dull and a poor conductor.
it has a low density and is ductile.
Answer: Poor conductor
Explanation:
The specific heat of a certain type of metal is 0.128 J/(g⋅∘C). What is the final temperature if 305 J of heat is added to 52.4 g of this metal, initially at 20.0 ∘C?
Answer:
65.47∘C
Explanation:
Specific heat capacity, c = 0.128 J/(g⋅∘C)
Initial temperature = 20.0 ∘C
Final temperature = ?
Mass = 52.4 g
Heat = 305 J
All these variables are related by the following equation;
H = m c ΔT
ΔT = H / mc
ΔT = 305 / (52.4 * 0.128)
ΔT = 45.47∘C
ΔT = Final Temperature - Initial Temperature
Final temperature = ΔT + Initial temperature
Final temperature = 45.47∘C + 20.0 ∘C = 65.47∘C
Complete ionic equation K2CO3(aq)+2CuF(aq) → Cu2CO3(s)+2KF(aq) Examine each of the chemical species involved to determine the ions that would be present in solution. Be sure to consider both the coefficients and subscripts of the molecular equation, and then write this precipitation reaction in the form of a balanced complete ionic equation. Express your answer as a chemical equation including phases.
Answer:
2K+(aq) + CO3²¯(aq) + Ca^2+(aq) + 2F¯(aq) —› Cu2CO3(s) + 2K+(aq) + 2F¯(aq)
Explanation:
K2CO3(aq) + 2CuF(aq) → Cu2CO3(s) + 2KF(aq)
The complete ionic equation for the above equation can be written as follow:
In solution, K2CO3 and CuF will dissociate as follow:
K2CO3(aq) —› 2K+(aq) + CO3²¯(aq)
CuF(aq) —› Ca^2+(aq) + 2F¯(aq)
Thus, we can write the complete ionic equation for the reaction as shown below:
K2CO3(aq) + 2CuF(aq) —›
2K+(aq) + CO3²¯(aq) + Ca^2+(aq) + 2F¯(aq) —› Cu2CO3(s) + 2K+(aq) + 2F¯(aq)
How many mL of calcium hydroxide are required to neutralize 25.0 mL of 0.50 M
nitric acid?
Answer:
6.5 mL
Explanation:
Step 1: Write the balanced reaction
Ca(OH)₂ + 2 HNO₃ ⇒ Ca(NO₃)₂ + 2 H₂O
Step 2: Calculate the reacting moles of nitric acid
25.0 mL of 0.50 M nitric acid react.
[tex]0.0250L \times \frac{0.50mol}{L} = 0.013 mol[/tex]
Step 3: Calculate the reacting moles of calcium hydroxide
The molar ratio of Ca(OH)₂ to HNO₃ is 1:2. The reacting moles of Ca(OH)₂ are 1/2 × 0.013 mol = 6.5 × 10⁻³ mol
Step 4: Calculate the volume of calcium hydroxide
To answer this, we need the concentration of calcium hydroxide. Since the data is missing, let's suppose it is 1.0 M.
[tex]6.5 \times 10^{-3} mol \times \frac{1,000mL}{1.0mol} = 6.5 mL[/tex]
Suppose of nickel(II) iodide is dissolved in of a aqueous solution of potassium carbonate. Calculate the final molarity of nickel(II) cation in the solution. You can assume the volume of the solution doesn't change when the nickel(II) iodide is dissolved in it. Round your answer to significant digits.
Answer:
0.619 M to 3 significant figures.
Explanation:
1 mole of [tex]NiI_{2}[/tex] - 312.5 g
? mole of [tex]NiI_{2}[/tex] - 2.9 g
= 2.9/312.5
= 0.0928 moles.
Concentration = no. of moles/vol in litres = [tex]\frac{0.0928}{0.150L}[/tex]
= 0.619 M
What's the difference between velocity time graph and distance time graph
Explanation:
Hi there!
I attached a photo of a unit summary that states the difference between s-t and v-t graph.
Hope this helps ;) ❤❤❤
PLEASE HELP ME Calculate the change in boiling point when 0.402 moles of sodium chloride are added to 0.200 kilograms of water. Kf = -1.86°C/m; Kb = 0.512°C/m -2.1°C 2.1°C -7.5°C 7.5°C
Answer:
The change in the boiling point would be 2.1°C.
Explanation:
1 ) Let us first determine the molarity of this solution :
M = mol / kg,
M = 0.402 mol / 0.200 kg = 2.01 M NaCl
2 ) ΔT = i [tex]*[/tex] K [tex]*[/tex] m
ΔT = 2 [tex]*[/tex] 0.512C/m [tex]*[/tex] 2.01m
ΔT = 2.06C
As you can see, this is none of the answer choices. However the van't Hoff factor i in this case was taken to be 2, but this value is actually less than the predicted ideal solution. This is due to the ion pairing, causing i to be around 1.7 to 1.8. Therefore our solution is option b, 2.1°C.
The gas in a 250. mL piston experiences a change in pressure from 1.00 atm to 2.55 atm. What is the new volume (in mL) assuming the moles of gas and temperature are held constant?
Answer:
[tex]\large \boxed{\text{0.980 L}}[/tex]
Explanation:
The temperature and amount of gas are constant, so we can use Boyle’s Law.
[tex]p_{1}V_{1} = p_{2}V_{2}[/tex]
Data:
[tex]\begin{array}{rcrrcl}p_{1}& =& \text{1.00 atm}\qquad & V_{1} &= & \text{250. mL} \\p_{2}& =& \text{2.55 atm}\qquad & V_{2} &= & ?\\\end{array}[/tex]
Calculations:
[tex]\begin{array}{rcl}\text{1.00 atm} \times \text{250. mL} & =& \text{2.55 atm} \times V_{2}\\\text{250. mL} & = & 2.55V_{2}\\V_{2} & = &\dfrac{\text{250. mL}}{2.55}\\\\& = &\textbf{98.0 mL}\\\end{array}\\\text{The balloon's new volume is $ \large \boxed{\textbf{0.980 L}}$}[/tex]
Draw the major product(s) obtained when the following compounds are treated with bromine in the presence of iron tribromide.
a. Bromobenzene
b. ortho-Xylene
c. Benzene sulfonic acid
d. Benzaldehyde
e. meta-Nitrotoluene
f, para-Dibromobenzene
g. Nitrobenzene tert-Butylbenzene
h. Benzoic acid
i. Dibromobenzene
Answer:
The halogens are the ortho and para directing groups. Whenever they react with other benzene compounds they will attach to the ortho or para positions of the benzene ring.
Major products which are obtained by reacting these given compounds are given in attached pictures with complete reactions.
HBr will always be the side product of the bromine reactions along with the major compound.
Explanation:
Which is the correct way to write 602,200,000,000 ,000,000,000,000 in scientific notation
Answer:
6.022 × 10^23
hope this helps :)
A 0.500 g sample of tin (Sn) is reacted with oxygen to give 0.534 g of product. What is the percent mass of the tin and percent by mass of oxygen in the sample
Answer:
Percentage mass of Tin = 96.3%
Percentage mass of oxygen = 6.40%
Explanation:
The product of the reaction is an oxide of tin.
Assuming all of the 0.500 g sample of tin reacted with oxygen to produce the oxide:
Mass of oxide = 0.534 g
Mass of tin present in the oxide = 0.500 g
Mass of oxygen in the oxide = 0.534 g of oxide - 0.500 g Sn = 0.034 g O
Percentage composition = mass of element/mass of compound × 100%
Percentage composition of Sn = 0.500 g/0.534 g × 100 = 93.6% Sn
Percentage composition of oxygen = 0.034 g/0.534 g × 100 = 6.40%
Please help asap! Giving brainliest.
What is the total number of electrons that can occupy the p sublevel? (3 points)
Select one:
a. 2 electrons
b. 6 electrons
c. 8 electrons
d. 10 electrons
Answer:
The answer is 6 because the p sublevel holds 3 orbitals and since each orbital can hold 2 electrons, the answer is 3 * 2 = 6.
Answer:
6 electrons
Explanation:
Each principal energy level above the first contains one s orbital and three p orbitals. A set of three p orbitals, called the p sublevel, can hold a maximum of six electrons. So the answer is 6 electrons.
Draw the curved arrow mechanism for the reaction between (2R,3R)-3,5-dimethylhexan-2-ol and PCl3.
Answer:
Sn2 mechanism
Explanation:
In this case, our nucleophile is the "OH" on (2R,3R)-3,5-dimethylhexan-2-ol. The alcohol group will attack the [tex]PCl_3[/tex] to produce a new bond between O and P with a positive charge in the oxygen. Additionally, when the OH attacks a Br atom leaves the molecule producing a bromide ion.
In the next step, the bromide ion produced will attack the carbon bonded to the OH that now is bonded to [tex]PCl_2[/tex]. An Sn2 reaction takes place and the substitution would be made in only one step. Due to this, we will have an inversion in the stereochemistry and the absolute configuration on carbon 2 will change from "R" to "S" to produce (2S,3R)-2-bromo-3,5-dimethylhexane.
I hope it helps!
When hydrogenation of two alkenes produce the same alkane, the more stable alkene has the___________ smaller heat of hydrogenation.
Explanation:
Heat of hydrogenation of alkenes is a measure of the stability of carbon-carbon double bonds.
In general, the lower the value of the heat of hydrogenation the more stable the double bond of the alkene.
Also, heat of hydrogenation of alkenes always have a negative value.
Which of these substances has the highest pOH? 0.10 M HCl, pH = 1 0.001 M HNO3, pH = 3 0.01 M NaOH, pH = 12 The answer is 0.10 M HCI, pH=1
Answer:On these combined scales of pH and pH it can be shown that because for water when pH = pH = 7 that pH + pH = 14. This relationship is useful in the inter conversion of values. For example, the pH at a 0.01 M solution of sodium hydroxide is 2, the pH of the same solution must be 14-2 = 12.
Explanation:
The 0.10M HCI, pH = 1 solution has the highest pOH. Therefore, option (1) is correct.
What is the pOH?pOH of a solution can be determined from the negative logarithm of the hydroxide ions concentration in the solution.
The mathematically pOH of the solution can be expressed as:
pOH = -log [OH⁻] ..............(1)
Where [OH⁻] represents the concentration of hydroxide ions in an aqueous solution.
Given, the pH = 1 of HCl
pH + pOH = 14
1 + pOH = 14
pOH = 14 - 1
pOH = 13
Given, the pH = 3 of HNO₃
pH + pOH = 14
3 + pOH = 14
pOH = 14 - 3
pOH = 11
Given, the pH = 12 of NaOH = 0.01 M
pH + pOH = 14
12 + pOH = 14
pOH = 14 - 12
pOH = 2
Learn more about pOH, here:
brainly.com/question/17144456
#SPJ2
Identify each reaction from the citric acid cycle as an oxidation‑reduction reaction, an esterification reaction, an amidation reaction, a hydrolysis reaction, a hydration reaction, or a dehydration reaction.
1. Which type of reaction occurs when succinyl-CoA is converted to succinate in the citric acid cycle?
2. Which type of reaction occurs when malate is converted to oxaloacetate in the citric acid cycle?
3. Which type of reaction occurs when aconitate is converted to isocitrate in the citric acid cycle?
Answer:
1. Oxidation-reduction and hydrolysis
2. Oxidation-reduction
3. Dehydration
Explanation:
Our options for each reaction are:
a) Oxidation‑reduction reaction
b) Esterification reaction
c) Amidation reaction
d) Hydrolysis reaction
c) Hydration reaction
f) Dehydration reaction
In reaction one the have the rupture of the S-CoA bond. This reaction takes place by the addition of a water molecule and the oxidation to a carboxylic acid group. So, for reaction 1 we will have an oxidation-reduction and a hydrolysis reaction.
For reaction 2, the functional group change from alcohol to a carboxylic acid. So, we have an oxidation-reduction reaction.
In the last reaction, we have the production of a double bond by the removal of water. With this in mind, we have a dehydration reaction.
See figure 1
I hope it helps
Assuming an efficiency of 34.90%, calculate the actual yield of magnesium nitrate formed from 139.6 g of magnesium and excess copper(II) nitrate.Mg+Cu(NO3)2⟶Mg(NO3)2+Cu
Answer:
300.44 g
Explanation:
The balanced equation for the reaction is given below:
Mg + Cu(NO3)2 —> Mg(NO3)2 + Cu
Next, we shall determine the mass of Mg that reacted and the mass of Mg(NO3)2 produced from the balanced equation.
This is illustrated below:
Molar mass of Mg = 24 g/mol
Mass of Mg from the balanced equation = 1 x 24 = 24 g
Molar mass of Mg(NO3)2 = 24 + 2[14 + (16x3)]
= 24 + 2[ 14 + 48]
= 24 + 124 = 148 g/mol
Mass of Mg(NO3)2 from the balanced equation =
1 x 148 = 148 g
From the balanced equation above,
24 g of Mg reacted to produce 148 g of Mg(NO3)2.
Next, we shall determine the theoretical yield of Mg(NO3)2.
This can be obtained as follow:
From the balanced equation above,
24 g of Mg reacted to produce 148 g of Mg(NO3)2.
Therefore, 139.6 g of Mg will react to = (139.6 x 148)/24 = 860.87 g of Mg(NO3)2
Therefore, the theoretical yield of Mg(NO3)2 is 860.87 g
Finally, we shall determine the actual yield of Mg(NO3)2 as follow:
Theoretical of Mg(NO3)2 = 860.87 g
Percentage yield = 34.90%
Actual yield of Mg(NO3)2 =?
Percentage yield = Actual yield /Theoretical yield x 100
34.90% = Actual yield /860.87
Cross multiply
Actual yield = 34.90% x 860.87
Actual yield = 34.9/100 x 860.87
Actual yield = 300.44 g
Therefore, the actual yield of Mg(NO3)2 is 300.44 g
If enough experimental data supports a hypothesis, then it
Answer:
Then the hypothesis is proved and becomes a theory.
If not, then another hypothesis should be proposed and tested.