Answer:
3.36 dm³
Explanation:
STP: Means Standard temperature and pressure.
According to Avogadro's Law, it states that the molar volume of every gas is the volume occupied by one mole of that gas at stp and is equal to 22.4 dm³
From the question,
1 mole of Nitrogen gas (N₂) occupies a volume of 22.4 dm³
But,
1 mole of nitrogen gas has a mass of 28 g
Therefore,
28 g of nitrogen gas occupies a volume of 22.4 dm³,
Then,
4.2 g will occupy a volume of X dm³
X = (22.4×4.2)/28
X = 3.36 dm³
Mg (s) + 2 HCl (aq) --> MgCl2 (aq) + H2 (g)
Use the balanced chemical equation above to determine the number of moles of hydrogen gas that would be produced if 3.50 moles of solid magnesium reacted. please show all work and record your answer with proper units and significant figures.
Pls help
Answer:
2Mg + 4HCl (aq) --> 2 MgCl2 (aq) + H2
Explanation:
balanced...
he diagram shows a device that uses radio waves.
Two radio towers. The towers are equal distance apart with an arrow between them. The left tower is labeled X. The right tower is labeled Y. The arrow is pointing from Tower X to Tower Y.
What is the role of the part in the diagram labeled Y?
modulate, amplify, and send out waves
capture, amplify, and demodulate waves
change the amplitude and frequency of waves
change the pulse and phase of waves
Answer:
b
Explanation:
A supersaturated solution is said to contain
Explanation:
A solution that contains more than the maximum amount of solute that is capable of being dissolved at a given temperature.
I hope it helps
Answer:
A supersaturated solution is said to contain more solute than it can dissolve at that given temperature.
In a chemical reaction, mass is conserved. This means that...
O A. The mass of the reactants stays the same during a chemical reaction
OB. The mass of the products stays the same during a chemical reaction
OC. The tpye and number of atoms in the reactants equals the type and number of atoms in the products
OD. The mass of the products is always twice the mass of the reactants
Answer: D
Explanation:
Which substance is a type of biomolecule that can be used for energy storage and insulation? O A. Nucleic acid O B. Carbon dioxide O C. Lipid D. Protein
Answer:
Protein
Explanation:
Protein is used to make insulation (like fat) and is used to store energy taken form food (please tell me if this works)
Protein which is made up of amino acids is a type of biomolecule that can be used for energy storage and insulation.
What are amino acids?Amino acids are defined as the substances which are considered to be the monomers of proteins.Every amino acid has the same structure consisting of a central carbon which is bonded to an amino group , carboxyl group and a hydrogen.
Each amino acid also has another atom or a group of atoms bonded to the alpha carbon which are also known as the R group or the variable group of the side chain.There are 20 common amino acids present in natural proteins and each amino acid has the same backbone.
The sequence and number of amino acids determines protein's shape,size and also its function. Each amino acid is attached to the other by a covalent bond formed by a dehydration reaction.
Learn more about amino acids,here:
https://brainly.com/question/15823799
#SPJ6
What are 3 kinds of moles
Males have glands called testes that release the hormone known as _______________. a estrogen b epinephrine c testosterone d toblerone
Answer:
testosterone is released from their testes!
If an organism ingests 950.0 g of glucose (C6H12O6) in its lifetime, how many grams of carbon dioxide (CO2) will be released? (molar mass C6H12O6 = 180.156 g/mol) (molar mass CO2 = 44.009 g/mol)
Answer:
1392. g CO2
Explanation:
If 24 grams of sodium chloride reacts with an excess amount of magnesium how many grams of sodium oxide will be produced
How many grams are in 11.9 moles of potassium sulfide, K2S?
1. Surface area, agitation, and ____ affect the dissolving rate of a solid. 1. termperature 2. location
Answer:??
Explanation:
Help please!!!!!!!!!! Both questions!!!!
Thallium-207 has a half-life of 4.77 minutes. If an initial sample weighed 155 grams, and
now only weighs 2.42 grams, how many half-lives have occurred?
A.4
B.6
C.5
D.3
Answer:
6
Explanation:
You divide the initial sample weight (155) by 2 until you get to 2.42.
HELP
The potential energy diagram for a reaction starts at 180 kJ and ends at 300 kJ. What type of reaction does the diagram best represent? (5 points)
Exothermic reaction
Endothermic reaction
Reaction between two solids
Reaction between two liquids
Answer:
Exothermic reaction
Explanation:
An exothermic process releases heat, causing the temperature of the immediate surroundings to rise
Answer:
Endothermic
Explanation:
Se disuelven 10 g de acido carbónico H2CO3 en 150 g de agua. Determina la concentración % m/m de esa disolución?
The question is: 10 g of carbonic acid H2CO3 are dissolved in 150 g of water. Determine the% m / m concentration of that solution?
Answer: The% m / m concentration of that solution is 6.66%.
Explanation:
Given: Mass of solute = 10 g
Mass of solvent = 150 g
Formula used to calculate the %m/m is as follows.
[tex]Percent (m/m) = \frac{mass of solute}{mass of solvent} \times 100[/tex]
Substitute the values into above formula as follows.
[tex]Percent (m/m) = \frac{mass of solute}{mass of solvent} \times 100\\= \frac{10 g}{150 g} \times 100\\= 6.66%[/tex]
Thus, we can conclude that the% m / m concentration of that solution is 6.66%.
A 72.4 mL solution of Cu(OH) is neutralized by 47.8 mL of a 0.56 M H2(C204) solution. What is the concentration of the Cu(OH)?
Answer: The concentration of [tex]Cu(OH)_{2}[/tex] is 0.369 M.
Explanation:
Given: [tex]V_{1}[/tex] = 72.4 mL, [tex]M_{1}[/tex] = ?
[tex]V_{2}[/tex] = 47.8 mL, [tex]M_{2}[/tex] = 0.56 M
Formula used to calculate the concentration of [tex]Cu(OH)_{2}[/tex] is as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]
Substitute the values into above formula as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}\\M_{1} \times 72.4 mL = 0.56 M \times 47.8 mL\\M_{1} = \frac{0.56 M \times 47.8 mL}{72.4 mL}\\= 0.369 M[/tex]
Thus, we can conclude that the concentration of [tex]Cu(OH)_{2}[/tex] is 0.369 M.
PHYSICAL CHANGE OR CHEMICAL CHANGE
1.When making a sauce, a chef boils the alcohol until it changes to a gas and leaves the pan.
2. A scientist adds high pressure to gaseous oxygen until it turns into a gas.
3. Hydrogen sets fire and burns when exposed to oxygen and a spark.
4. A person accidentally drops a mirror so that it shatters.
5. A child falls from a tree and breaks a bone.
6. As soon as you begin eating, your body starts to digest food. The process of digestion is a
7. After dipping a piece of a chicken into batter, a person puts it into a deep fryer. The process of frying chicken is a
8. When a person slices tomatoes before adding them to a salad, what type of change did the tomatoes experience
9. Sugar is dissolved completely into water.
10. A branch rots and decomposes after falling from a tree
Answer:
1.Chemical Change
2.Chemical Change
3.Chemical Change
4.Physical Change
5.Physical Change
6.Chemical Change
7.Chemical Change
8.Physical Change
9 Physical Change
10.Physical Change
Explanation:
Physical changes only change the appearance of a substance, not its chemical composition. Chemical changes cause a substance to change into an entirely substance with a new chemical formula.
PLEASE HELP!!!!!!!!!!
what is the mole fraction of MgCl2 in a solution created by dissolving 132.1 g of MgCl2 into 9.72 mol of water?
1 - 0.125
2- 12.5
3- 2.50
4- 0.225
1. Calculate the mass of 1.000 mole of CaCl2
Show all your work. Answer in scientific notation when applicable.
Answer: 110 g/mol
Explanation:
First we need to find the molar mass of CaCl2 using the periodic table:
Ca: 40
Cl: 35 (Since Cl has a 2 at the end, multiply 35 by 2)
70+40= 110
Then multiply by amount of moles
110g×1.000mol = 110 g/mol
How many moles are in 8.0 gram sample of C3H4
Answer:
0.18 mol C₃H₈
Explanation:
to find the mole you have to convert the 8.0grams into moles.
8.0g C₃H₈ 1 mol C₃H₈
1 44.0g C₃H₈
*Pretend that those are a table*
I got 44.0g because Carbon is 12.0g you multiply that 3 times because it has a subscript of 3 and do the same for Hydrogen (1.0 x 8) then add those which would be 44.0g.
1 mol of C₃H₈ = 44.0g C₃H₈
now just mulitply and divide them.
8.0g x 1 = 8.0
1 x 44.0g = 44.0
8.0/44.0 = 0.18 mol C₃H₈
How many grams equal 4.3 x 1024 atoms of oxygen (O2)?
Answer:
https://socratic.org/questions/how-many-grams-are-in-1-25-x-10-22-atoms-of-oxygen#403337
Explanation:
HELP QUICK Which of the following planets spins/rotates faster than earth?
A) Saturn
B) Jupiter
C) Venus
D) Mars
Answer:
B
Explanation:
Jupiter is the fastest spinning planet.
A baby chicken has feathers on its feet that are similar to that of its parents. Where are the instructions stored that provide information for a baby chicken’s feathery feet? A) In cytoplasm inside cells B) On genes within chromosomes C) On the cell membrane Eliminate D) In the mitochondria
Answer:
B) On genes within chromosomes
Explanation:
Answer:
B) On genes within chromosomes
A bowling ball is let go from a height of 30 cm. What is the velocity of the
ball just before it hits the ground?
Select one:
о
0.30 m/s.
О
17 m/s.
O
24 m/s
a
1.3 m/s
Answer:
The answer is 0.30 m/s
Explanation:
i search it on
A 32.9-mL sample of Ba(OH)2 is titrated with HCl. If 37.2 mL of 0.863 M HCl is needed to reach the endpoint, what is the concentration (M) of the Ba(OH)2 solution
Answer:
[tex]M_{base}=0.488M[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to solve this problem by firstly writing the chemical reaction between hydrochloric acid and barium hydroxide:
[tex]2HCl+Ba(OH)_2\rightarrow BaCl_2+2H2_O[/tex]
It means there is 2:1 mole ratio of the acid to base, and we are able to write the following mole ratio, then written in terms of volumes and concentrations:
[tex]n_{acid}=2n_{base}[/tex]
Thus, we obtain the following:
[tex]M_{acid}V_{acid}=2M_{base}V_{base}[/tex]
Then, we solve for the concentration of the base and consequently plug in the given data to obtain:
[tex]M_{base}=\frac{M_{acid}V_{acid}}{2V_{base}} \\\\M_{base}=\frac{0.863M*37.2mL}{2*32.9mL}\\\\M_{base}=0.488M[/tex]
Regards!
Substances formed as a result of a chemical reaction are calledImmersive Reader (1 Point) products reactants catalysts precipitates
Answer: substances formed as a result of chemical reaction are called PRODUCTS.
Explanation:
A chemical reaction can be defined as a reaction in which substances known as the REACTANTS makes or breaks it's bonds to form another substance usually referred to as the PRODUCT. Usually, a new substance which is referred to as the product that is formed is different from the original reacting substances. Some of the characteristics of a chemical reaction include:
--> colour change,
--> heat production,
--> precipitation
The rate at which these chemical reaction occurs depends on some factors such as pressure, temperature and concentration of the reactants
There are different examples of chemical reaction which includes:
--> Rusting of iron: this occurs when iron and oxygen combines to form a mixture of iron oxides, which is the product of the chemical reaction.
--> The burning of magnesium in air: in this Chemical reaction, magnesium reacts with oxygen to form magnesium oxide which is the product of the chemical reaction.
2Mg(s) + O2(g) △→ 2MgO(s)
--> Production of table salt: this is formed from the reaction of sodium and chloride to give sodium chloride as the product of the chemical reaction.
Therefore in a chemical reaction, no atom is destroyed or created but a new PRODUCT is formed from reactants.
Why do you think earthquakes and volcanoes occur in patterns?
Answer: ANSWER BELOW
Explanation:
Because that is the way it works.
Please help thank you
Answer:
The answer is the 2nd one down: The green house affect
A student puts his signature with graphite pencil.
If the mass of carbon in the signature is 10-12g, calculate
the number of carbon atoms in the signature.
Answer:
If the mass of carbon in the signature is 10-12g, calculate. the number of carbon atoms in the signature. the answer is 5.01 x 10^10 atom.
Explanation:
wlcm
please mark me as brainliest
What force works against friction?
inertia
kinetic
potential
Answer:
kinetic is the correct answer. can I get brainliest please