Answer:
Resistencia = 12.5 Ohmios
Explanation:
Dados los siguientes parámetros;
Voltaje = 3.5 Volts
Corriente = 0.28 Amps
Para encontrar el resistencia;
La ley de Ohm establece que a temperatura constante, la corriente que fluye en un circuito eléctrico es directamente proporcional al voltaje aplicado en los dos puntos e inversamente proporcional a la resistencia en el circuito eléctrico.
Matemáticamente, La ley de Ohm viene dada por la fórmula;
Voltaje = corriente * resistencia
Resistencia = voltaje/corriente
Resistencia = 3.5/0.28
Resistencia = 12.5 Ohmios
Por tanto, la resistencia del filamento de una linterna de bolsillo es de 12,5 ohmios.
Expresa en notación científica los siguientes números en notación científica estándar: a) 9367421= b) 7241= c) 0.0005519= d) 0.02=
Answer:
so yeah it is Respuesta
WILL MARK BRAINLIEST FOR CORRCET ANSWER!!!!!!!!!
What is the name of the method for drawing a trend line for the data in a scatterplot in which an oval is drawn around all the points in the scatterplot except the outliers?
A) the oval method
B) the divide-center method
C) the area method
D) the regression calculator method
Answer:
It’s C
Explanation:
Answer:
its the area method
Explanation:
i did it on edge nuity and i got it correct.
After the collision, car 1 has a final velocity of 6m/s south. What is the final velocity of car2?
a) 35m/s north
b) 35m/s south
c) 81 m/s north
d) 81 m/s south
what type of beetle is this?
Calculate the first and second velocities of the car with three washers attached to the pulley, using the formulas
v1 = 0.25 m / t1, and
v2 = 0.25 m / (t2 – t1)
where t1 and t2 are the average times the car took to reach the 0.25 and the 0.50 meter marks. Record these velocities, to two decimal places, in Table E.
What is the first velocity of the car with three washers at the 0.25 meter mark?
m/s
What is the second velocity of the car with three washers at the 0.50 meter mark?
m/s
Answer:
0.19 and 0.45
Explanation:
edge
The first and second velocities of the car are [tex]0.25/t_1[/tex] and [tex]0.50/t_2[/tex]respectively.
What is velocity?The velocity of an object is defined as the product of the distance travelled in a given direction and the time required to travel that distance. The velocity is expressed mathematically as,
v = d/t
Here, d represents the travelled distance.
And t is the typical amount of time needed to go the distance.
Given,
The value of the first distance is, d1 = 0.25 m.
The value of the second distance is, d2 = 0.50 m.
Then the first velocity of the car at 0.25 m is,
[tex]v_1 = d_1/t_1\\v_1 = 0.25 / t_1[/tex]
Thus,[tex]t_1[/tex] denotes the first distance's typical time.
The second velocity of the car with three washers at the 0. 50 m mark is
[tex]v_2 = d_2/t_2\\v_2 = 0.50 /t_2[/tex]
Here, [tex]t_2[/tex] stands for the second distance's typical time.
Thus, the first and second velocities of the car are [tex]0.25/t_1[/tex] and [tex]0.50/t_2[/tex]respectively.
Learn more about Velocity, here:
brainly.com/question/25796948
#SPJ2
Waldo needs to know how much force to apply in order to move a 4000-kg object at 2 m/S2. Which law should he refer to
Answer:
Newton's second law of motion?
A car is moving along a road. What force between the tyres and the road makes the car stop? Tick the correct box. Air Resistance, Gravity, Friction or weight?
Answer:All the forces are acting. The force due to which the car stops that is between road and tire is "friction".
Explanation:
Two train cars with the same mass (30,000 kg) are traveling in the same direction when they collide.
Train Car A has a velocity of 10 m/s and Train Car B has a velocity of 5 m/s. What is their total
momentum after the collision? Make sure to show all your work and include proper units.
Answer:
25
Explanation:
I just did this
What are two ways fission is used in the real world.
Answer:
germ cleaning
and getting up cooking grease
Explanation:
A spring has an unstretched length of
12.0 cm. Its stiffness k is 8 N/cm. What load is
needed to stretch the spring to a length of 15.0 cm?
Answer:
24 N
Explanation:
Given,
Unstretched length or original length , x1 = 12cm
Stiffness constant, k = 8 N/cm
Load required to take spring to a length , x2 of 15cm
Recall the relation :
F = Ke
Where, e = extension
e = x2 - x1
e = (15 - 12) = 3
F = ke
F = 8 N/cm * 3cm
F = 24 N/cm*cm
F = 24 N
Hence, required load = 24 N
How do you get DC current and AC current? from a generator?
Answer:
They do that by converting rotating mechanical energy into electrical power. Portable generators use an engine—typically running on gasoline, diesel, or propane, to turn an alternator which produces alternating electrical current or AC.
The model shows how the Sun fuses two nuclei of hellum-3 into beryllium-6. Since beryllium-6 is unstable, it will decay into smaller nuclei.
What additional product completes the model?
O A Helium-4
OB Helium-8
o C Carbon-4
OD Carbon-8
Answer:
A
Explanation:
I took the test
Un atleta tiene en un instante dado una velocidad de 4 m/s. Si a partir de ese instante y durante 2 s adquiere un MRUA con una aceleración de 3 m/s2. Calcula la velocidad que alcanza al cabo de esos 2 s.
Answer:
Velocidad final, V = 8 m/s
Explanation:
Dados los siguientes datos;
Velocidad inicial, u = 4 m/s
Aceleración, a = 2 m/s²
Tiempo, t = 2 segundos
Para encontrar la velocidad final (v), usaríamos la primera ecuación de movimiento;
V = u + at
Sustituyendo en la fórmula, tenemos;
V = 4 + 2*2
V = 4 + 4
Velocidad final, V = 8 m/s
Light waves travel at 3 × 10 8 m/s. If the light wave has a particular wavelength of 400 nm (400 × 10 –9 m), calculate its frequency.
Answer:
[tex]f=7.5\times 10^{14}\ Hz[/tex]
Explanation:
Given that,
The wavelength of light, [tex]\lambda=400\ nm=400\times 10^{-9}\ m[/tex]
The speed of light, [tex]c=3\times 10^8\ m/s[/tex]
We need to find the frequency of light. We know that,
[tex]c=f\lambda[/tex]
Where
f is the frequency
So,
[tex]f=\dfrac{c}{\lambda}\\\\f=\dfrac{3\times 10^8}{400\times 10^{-9}}\\\\f=7.5\times 10^{14}\ Hz[/tex]
So, the frequency of light is [tex]7.5\times 10^{14}\ Hz[/tex].
PLEASEEEE HELP
Blue light of wavelength 435 nm
enters diamond (n = 2.42). What
is the wavelength of the light in
diamond?
(Unit = nm)
Answer:
Wavelength of light in diamond λ2 = 179.75 nm (Approx.)
Explanation:
Given:
Blue light of wavelength λ1 = 435 nm
n2 in diamond = 2.42
Find:
Wavelength of light in diamond λ2
Computation:
Since the wavelength is smaller, the frequency stays constant. The frequency of vibrations does not shift when they pass from one source to the next.
So,
n1λ1 = n2λ2
(1)(435) = (2.42)λ2
Wavelength of light in diamond λ2 = 179.75 nm (Approx.)
Answer:
180
Explanation:
got it right on acellus
The equation shown is used to calculate moments. The value d is the __________ from the line of action of the force to the __________. What two words complete the FIRST gap in this sentence?
Answer:
The answer is "perpendicular and distance".
Explanation:
The Perpendicularity would be the connection of two lines that meet in such a right angle perpendicularity (90 degrees). It extends to all geometric objects involved.
The Distance was its cumulative motion of a body regardless of the direction that's why the value "d" is perpendicular to the distance from the transformer.
Research and define pressure, as it relates to air or water pressure.
Answer:
PRESSURE is a force exerted by the substance per unit area on another substance.
The key difference between water pressure and air pressure is that one is made up of water and the other is made up of air. Both air pressure and water pressure are based on and follow the same physical principals.
Explanation:
HELP ASAP Which statement describes the water particles when condensation takes place?
A. The particles gain heat energy and move closer to each other
B. The particles lose heat energy and move closer to each other
C. The particles gain heat energy and move away from each other
D. The particles lose heat energy and move away from each other
If a chemical reaction has a AH value of -125 kJ, it would be considered what?
A. an exothermic reaction
B. a reaction that absorbs energy
C. an endothermic reaction
D. A reaction that probably gets cold
exothermic
Explanation:
negative means it's losing energy
hence, the force needed to accelerate the 1000kg car by 3m/s2 is 3000N
Answer:
i'll answer your question but follow me first
HOW TO ANSWER THIS QUESTION PLEASE
Answer:
radioactive decay is a random processuse long tongsExplanation:
Quantum theory has taught us that virtually everything to do with the nature of matter in the universe is a random process. The decay of atomic nuclei is something that makes that randomness "visible" with appropriate instrumentation. As such, the rate of decay will vary over the "short" term. Consequently, it is not surprising to see a variation of a few counts in an activity measurement over a period of a few minutes.
__
Safety with respect to radioactive materials involves staying as far away from them as possible. The use of long tongs for handling would be appropriate.
Answer:
Radioactive decay is a long proxyUse long tongs↔ for safety precautions the scientist should used this upon working with radioactive materials in a laboratory.
A dentist uses a small concave mirror to locate a cavity in a patient's tooth. The focal length of the mirror is 2.00 cm. If the mirror is held 1.60 cm from the tooth, how many times bigger will the image be? (In other words, what is the magnification?)
Answer:
m = 4.0
Explanation:
For this exercise in geometric optics we will use the equation of the constructor
[tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]
where f is the focal length, p and q are the distance to the object and image, respectively.
In the exercise indicate the focal length f = 2.00 cm, the distance to the object p = 1.60 cm, let's find the distance to the image
[tex]\frac{1}{q} = \frac{1}{f} - \frac{1}{p}[/tex]
let's calculate
[tex]\frac{1}{q} = \frac{1}{2} - \frac{1}{1.6}[/tex]1 / q = ½ - 1 / 1.6
[tex]\frac{1}{q}[/tex] = -0.125
q = -8 cm
the magnification is
m = - q / p
m = 8/2
m = 4.0
Light waves Group of answer choices are not electromagnetic radiation. do not require a medium. can not travel in a vacuum. do not travel in straight lines from the source.
Answer:
do not require a medium
Explanation:
Light waves can be regarded as electromagnetic waves and it transverse in nature, no medium material is required to pass through. Light wave can travel through vacuum and it's ray can travel in straight lines even from point source. Light convey energy in perpendicular direction to electric field as well as magnetic field.
Why friction is called necessary evil?
Explanation:
Frictional force causes a lot of losses in general upkeep and wear and tear of machinery. Hence it is considered as a evil. But almost all crucial tasks cannot be carried out without the presence of friction. ... Hence it is considered as a necessary evil .
Explanation:
Frictional force causes a lot of losses in general upkeep and wear and tear of machinery. Hence it is considered as a evil. But almost all crucial tasks cannot be carried out without the presence of friction. ... Hence it is considered as a necessary evil .
If you walk for 1.5 hours at an average speed of 4 miles/hr. How far will you have walked?
A spherical conducting shell has charge -5 C. A particle with charge -8 C is placed at the center of the cavity. The charges (in C) on the inner surface and on the outer surface of the shell, respectively, are:
Answer:
Explanation:
The charge of - 5C will be spread on the outer surface of the shell . The presence of - 8C charge at the Centre will create + 8C charge on the inner surface and - 8C charge on the outer surface . The result is that the total charge on the outer surface of the shell will be - 5C + - 8C = - 13C and the inner surface will have charge of + 8C . + 8C charge will be locked to centrally situated - 8C charge and will not be neutralized by negative charge of outer surface .
A micro element that is essential for the formation of haemoglobin
Iron ( Fe ) is a micro element that is essential for the formation of haemoglobin.
Hemoglobin has two components-
Haem - The iron partGlobin - The proteinaceous part12
C
6
What is the number of protons in this carbon atom?
OA. 12
OB. 6
O C. 18
OD. 24
Answer:
B. 6
Explanation:
i think... im in 7th grade and haven't really leaned this but im like 60% sure but i migjt be wrong
Answer:
your answer is B 6 protons
Explanation:
since the atomic number for carbon is 6 it also represents the number of protons and electrons
Find the electric field a distance z above the midpoint between equal and opposite charges,a distance d apart
Answer:
Ex = [tex]2 k q \frac{x}{(x^2 + z^2) ^{3/2}}[/tex] , E_z =0
Explanation:
To find the electric field of each charge, let's use
E = k q / r²
where the field for a positive charge is outgoing and for a negative charge it is incoming.
Since the electric field is a vector magnitude, let's add its components at the point z
X axis
Eₓ = E₁ₓ + E₂ₓ
Eₓ = 2 E₁ₓ
Z axis
E_z = E_{1z} -E_{2z}
E_z= 0
Let's find the expression for the electric field
the distance from the charge to the test point, using the Pythagorean theorem is
r² = (x-0) ² + (0-z) ²
E = [tex]k \frac{q}{x^2 + z^2}[/tex]
with trigonometry we can find its components
cos θ = E₁ₓ / E
E₁ₓ = E cos θ
we substitute
Eₓ = 2 E cos θ
where the cosine
cos θ = x / r
Ex = [tex]2 k \frac{q}{x^2 + z^2} \ \frac{x}{\sqrt{x^2 + z^2} }[/tex]
Ex = [tex]2 k q \frac{x}{(x^2 + z^2) ^{3/2}}[/tex]
E_z = 0
An eighth-grade class is studying the motion of objects. They have learned the following concepts about motion.
Motion occurs when there is a change in the position of an object with respect to a reference point.
While the speed of the object may change at various times during a trip the average speed for the trip is found by dividing the total distance by the total time.
The motion of the object can be changed by varying the amount of net force acting on the object or by varying the mass of the object.
The teacher asked students to design investigations to determine how changing the forces acting on an object or the mass of the object would change its motion.
The materials for the investigation included:
1 - toy cart
3 - 10N weights
1 - pulley
2 - meters of string
One group of students decided to design an investigation to determine how different amounts of mass on the toy cart would affect the speed of the toy cart. They set up their investigation as shown below:
The students performed several trials using different masses in the toy cart (M1). They hung a mass shown as (M2) to pull the toy cart as it dropped.
Below is a table they made to record their results.
Which of the following would be a way to test the effect changing the amount of force acting on the object has on the average speed of the object?
Move the cart at various speeds and determine the force at M1
Add varying numbers of weights to M1 and measure the speed of the car.
Add varying numbers of weights to M2 and measure the speed of the cart.
Move the cart at various speeds and determine the force exerted by M2
Add varying numbers of weights to M1 and measure the speed of the car.
Add varying numbers of weights to M2 and measure the speed of the cart.
How to test the effect of weight on the speed of object?In order to test the changing amount of force that is acting on the object has effect on the average speed of the object we have to change the amount of weight on the object and allows it to move to a certain point in this way we can check the effect of changing amount of weight on the speed of the object.
Learn more about weight here: https://brainly.com/question/2337612