Answer:
1.
2.black box
3. Weld left to right or right to left, make sure the contact tip is within ⅜” of the work when welding, meaning that there should never be more than ⅜” of wire “sticking out”, tilt the handle to about 75 degrees.
4. Vertical jump technique
5. For the horizontal position welding technique, you need to point the MIG gun upward in an angle between 35-45 degrees and tilted at an angle between 15-35 degrees towards the weld position.
6. The 6013 electrodes can be used with AC or DC (either straight or reverse polarity) in any position. It can weld mild steel to medium steel. However, there are some positive and negative reviews about the E6013. It has a thicker coating, for example, that does not spatter.
7.
8.
9.7018 Welding Rod Meanings And its Amperage Settings, Applications & Features
10. Porosity or void fraction is a measure of the void (i.e. "empty") spaces in a material, and is a fraction of the volume of voids over the total volume, between 0 and 1, or as a percentage between 0% and 100%.
11. Porosity is caused by the absorption of nitrogen, oxygen and hydrogen in the molten weld pool which is then released on solidification to become trapped in the weld metal.
12. When using a 3/32-inch diameter rod is that you will need to use 50 amps on 1/16-inch steel thickness and around 90 amps on the ⅛-inch thickness of steel. You will need to set the amps much higher for the bigger rods. For 5/32-inch diameter rod, you can set the current at 120 amps for welding the 1/4-inch steel.
Explanation: sorry for the one i skip i did not know it.
bruh is said you need you to watch a video to answer this question/
What are the five basic elements of a system?
Answer:
input unit
out put unit
central processing(CPU)
arthimetic and logic unit(ALU)
Explanation:
SAME IN ANSWER IN ANSWER IT'S SELF I EXPLAINED.i hope it helps u.asking question is good for learning
___ are NOT considered road users?
A. Road maintenance crews
B. Gas station employees
C. Traffic police
D. Construction workers
Gas station employees are not considered road users. The correct option is B.
Who are Gas station employees?An employee at a full-service filling station who does labor other than taking money is referred to as a filling station attendant or gas station attendant (also known as a gas jockey in the US and Canada).
At a full-service gas station, a gas jockey, also known as a gas station attendant, offers customer care. They must greet clients, pump the necessary amount of fuel, clean windows, check fluid levels, and tire pressure, and process payments, among other things.
They are not road users. Furthermore, they just work in the gas stations in particular areas. All others work for roads.
Therefore, the correct option is B. Gas station employees.
To learn more about Gas station employees, refer to the link:
https://brainly.com/question/16823242
#SPJ2
NEED HELLP ASAP! In approximately 200 words, explain what three factors you believe will have the greatest impact on the future of the green building market in the next five years, and why.
Who does the narrator blame for the loss of her job as editor-in-chief?
see if i care readworks
Answer:
The Narrator blamed Maxwells for the loss of her job.
Explanation:
hope im not late
By conducting a survey, Sarah and Jesse determine that an “open space” is home to over fifty different species of plant life.
True or false
Kim is assigned to write an important company report with Philip and Tara, her coworkers. Because Kim prefers to work alone, she decides to do the report herself without telling her boss or her assigned coworkers.
Which inappropriate work behavior is Kim exhibiting?
Answer:
refusing to collaborate on team projects i think
Explanation:
its on edge
The component of a fluid system where a fluid is stored, but not under pressure, is called a container.
True
False
Answer:
The answer is true
please friend me thank you bye.
Explanation:
Answer:
trueeeeeeeeeeeeeee
Explanation:
Using a telescope to determine the different particles in the rings of Saturn represents which step in the scientific process?
A.)conduct an experiment
B.)conduct basic research
C.)ask a question
D.)conduct applied research
20POINTS
Mass production of automobiles is an example of what step of the engineering design process?
A.)product testing
B.)basic research
C.)communicate the results
D.)problem statement
Answer:
C
Explanation:
Answer:
it is c.
Explanation:
1. Which of the following is an engineering function in which an engineer takes new ideas for
products or processes and gets them ready for production?
O consulting
O development
O research
O analysis
Answer: development
Explanation:
what does nasa stand for
Answer:
NASA stands for National Aeronautics and Space Administration
Explanation:
***BRAINLIEST***
When welding, the welder holds which of the following?
A Electrode
B Electrode lead
C Electrode holder
D Workpiece connection
The extent to which gravity exerts force on an object is known as ______. [multiple choice] velocity, mass, volume or weight
Answer:
I believe the correct answer would be Weight.
Weight is a force that gravity exerts on an object.
Hope this helped :))))
What branch of chemistry is credited with the development of silicone?
A.)biochemistry
B.)organic chemistry
C.)inorganic chemistry
D.)analytical chemistry
Answer:
C). Inorganic Chemistry
Explanation:
Inorganic chemistry is characterized as the branch of chemistry that deals with the elements(including carbon) and those compounds which do not contain carbon includes minerals, metals, inorganic, organometallic compounds. As we know, 'Silicone' is characterized as a semi-inorganic polymeric compound that possesses a wide range of thermal stability and extreme water repellence. Thus, it is classified as a part of inroganic chemistry. Hence, option C is the correct answer.
The refinement of a fuel additive to improve gas mileage represents which step in the engineering design process?
A.)modify a prototype
B.)conduct applied research
C.)state a problem
D.)conduct basic research
Answer:
I believe the answer is modifying a prototype.
Explanation:
6. What length of blade will fit a 14 in. band saw if the distance
between wheel centers is 24 in.? Make your calculations in the space
provided. Round your answer to the nearest full inch. Convert the
rounded inch length to millimeters and round to the nearest full unit.
Answer:
355.6in
Explanation:
If you hit an unoccupied vehicle and cannot find the owner, you should Choose an answer: A. Leave the scene and repair your own vehicle. Wait for the other owner�'s insurance company to contact you. B. Leave the scene and wait for the police to contact you. C. Leave a note with your name, address, and registration number in an easily seen place on the vehicle, and report the crash to the proper law enforcement agency.
Answer:
Leave a note with your name, address, and registration number in an easily seen place on the vehicle, and report the crash to the proper law enforcement agency.
Explanation:
Also notify your insurance company of the incident - telephone should also be included on the note
The answer to the question is C "Leave a note with your name, address, and registration number in an easily seen place on the vehicle, and report the crash to the proper law enforcement agency"
Option A is incorrect. The person should not leave the scene and repair his or her own vehicle alone. The person should take responsibility for the damage caused.
Option B is incorrect. Leaving the scene and waiting for the contact from the police is not appropriate.
Option C is the correct answer. The person should leave a note with their name, address, and registration number and then report the crash to the proper law enforcement agency.
Read more on:
https://brainly.com/question/14328441
Which branch of science was most likely involved in the development of a laundry soap that promises “dirt-eating enzymes?”
environmental science
physics
chemistry
geology
Answer:
chemistry
Explanation:
Select the material used to clean a prototype board before soldering.
А.
water spray
B. cotton ball
C. abrasive pad
D. multipurpose cleaner fluid
Answer:
C. Abrasive Pad
Explanation:
The other guy is wrong a cotton ball won't get the job done so you have to use a sandpaper like abrasive pad. You cannot use wet material. I just got a 100% on Plato trust me
A simple method for opening or closing a circuit is to use a?
I will Brainlist
"Burning and Inch". Describe this measurement.
Answer:
what measurement
Explanation:
Answer:
You measured from the 1" mark (“burning” the first inch), then forgot to add an inch when marking.
Explanation:
Another way to say it is "Burn an Inch."
If you wanted to conduct an experiment to determine the temperature at which milk freezes compared to other liquids, such as water or juice, explain the steps you would need to make it a fair test
Electrical Engineering dates back to which century?
Which description is that of a vertical stroke?
The vertical stroke as a sign is often used with sound-meaning signs to indicate their status as ideograms
I'm not sure if its true
Answer:
the answer is true. your welcome.
The question “How do plants convert sunlight to energy?” best represents which of the following?
A.)applied science
B.)astronomy
C.)nuclear physics
D.)basic science
Answer:
D
Explanation:
I would say this awnser because its the only one that makes sence to me
On some late model cars, climate control systems wil create trouble codes for trouble shooting purposes.
True
O False
The antipode of any location on Earth is the point on the opposite side of the planet. So the antipode of New York City is in the Indian Ocean off Perth, Western Australia. What are the terrestrial coordinates of this Indian Ocean location? (1) 41° north, 74° west (2) 41° north, 74° east (3)41° south, 74° west (4) 41° south, 74° east
Answer:
The correct option is;
(4) 41° south and 74° east
Explanation:
The terrestrial coordinates of New York City, is given from an online resource as (latlong website) as 40° 43' 50.1960'' N and 73° 56' 6.8712'' W which is approximately 41° N and 74° W, therefore, given that the antipode of a point is directly located on the opposite side of the point, and that the antipode of New York City is the Indian Ocean, we have that the coordinates of the Indian Ocean will be obtained by changing the direction of measurement to the opposite directions as follows;
New York City Terrestrial Coordinate (approximate) [tex]{}[/tex] Antipode
41° N and 74° W [tex]{}[/tex] 41° S and 74° E
Therefore, the coordinates of the Indian ocean are 41° S and 74° E
If your license was issued in error, it may be ____.
A. suspended
B. cancelled
C. terminated
D. revoked
Answer:
B. Cancelled
Explanation:
Got it right on Drivers Ed!
Answer:
B. Cancelled
Explanation:
Structural engineers, designing an eighty-story office building, need to account for sway. They would most likely use a(n) ____
There aren't any answer choices
Answer:
I would say a level
Explanation:
A level is used as a horizontal reference line, which will tell if the building is leaning to one side, or if its up right. I may be wrong but this is the closest thing I can think of for this question.