Answers
Related Questions
How many moles of O2 are needed to produce 8.33 moles of H2SO4?
Answers
Hope it helped
A gas at 1.10 atm and 30.0°C fills a flexible container with an initial volume of 2.00 L. If the temperature is raised to 80.0°C and the pressure increased to 2.40 atm, what is the new volume?
Answers
Answer:
P1=1.10atm
V1=2.00L
T1=30.0+273=303
P2=2.40atm
V2=?
T2=80.0+273=353
Explanation:
V2=1.10*2.00*353=776.6
2.40*303=727.2
776.6/727.2=1.0679L
The new volume occupied by the of gas as its temeprature and pressure is raised is 1.07L.
Combined gas lawCombined gas law put together both Boyle's Law, Charles's Law, and Gay-Lussac's Law. It states that the ratio of the product of volume and pressure and the absolute temperature of a gas is equal to a constant.
It is expressed as;
P₁V₁/T₁ = P₂V₂/T₂
Given the data question;
Initila pressure P₁ = 1.10atmFinal pressure p₂ = 2.40atmInital temperature T₁ = 30.0°C = 303.15KFinal temperature T₂ = 80.0°C = 353.15KInitial Volume V₁ = 2.00LFinal Volume V₂ = ?To calculate the new volume that the gas occupy, we subtsitute our given values into the expression above.
P₁V₁/T₁ = P₂V₂/T₂
P₁V₁T₂ = P₂V₂T₁
V₂ = P₁V₁T₂ / P₂T₁
V₂ = ( 1.10atm × 2.00L × 353.15K ) / ( 2.40atm × 303.15K )
V₂ = 776.93LatmK / 727.56atmK
V₂ = 1.07L
Therefore, The new volume occupied by the of gas as its temeprature and pressure is raised is 1.07L.
Learn more about the combined gas law here: brainly.com/question/25944795
Instructions
Click the links to open the resources below. These resources will help you complete the assignment. Once you have created your file(s) and are ready to upload your assignment, click the Add Files button below and select each file from your desktop or network folder. Upload each file separately.
Now that the lab is complete, it is time to write your lab report. The purpose of this guide is to help you write a clear and concise report that summarizes the lab you have just completed.
The lab report is composed of four sections:
Section I: Experimental Overview
• Provide background information.
• Include the hypothesis(es).
• Summarize the procedures.
Section II: Data and Observations
• Summarize the data you collected in the lab guide.
• Include information from data tables.
• Include any written observations that are relevant.
Section III: Analysis and Discussion
• Discuss any important calculations or formulas used.
• Identify key results, what the results indicate, and any trends in the data.
• Include graphs (if constructed) that display trends in the data.
• Provide possible reasons for any problems with the experiment, or unexpected data.
Section IV: Conclusions
• Identify if the hypothesis(es) was (were) supported or refuted.
• Provide logical reasoning based on data.
• Explain how the experiment could be improved.
To help you write your lab report, you will first answer the questions listed below by reflecting on the experiment you have just completed. Then you will use the answers to these questions to write the lab report that you will turn into your teacher.
You can upload your completed report with the upload tool in formats such as OpenOffice.org, Microsoft Word, or PDF. Alternatively, your teacher may ask you to turn in a paper copy of your report or use a web-based writing tool.
Questions
Section I: Experimental Overview
• What is the purpose of the lab, the importance of the topic, and the question you are trying to answer?
• What is your hypothesis (or hypotheses) for this experiment?
• What methods are you using to test this (or each) hypothesis?
Section II: Data and Observations
• Locate the data and observations collected in your lab guide. What are the key results? How would you best summarize the data to relate your findings?
• Do you have quantitative data (numerical results or calculations)? Do you have qualitative data (written observations and descriptions)? How can you organize this date for your report?
Section III: Analysis and Discussion
• What do the key results indicate?
• If you constructed graphs, what trends do they indicate in your data?
• Were there any problems with the experiment or the methods? Did you have any surprising results?
Section IV: Conclusions
• What do the results tell you about your hypothesis(es)?
• How do the data support your claim above?
• If you could repeat the experiment and make it better, what would you do differently and why?
Answers
Just putting a comment here, I needed to test something
The moon appears to change _________ over the course of the _______________.
Answers
Answer:
shape or size? over the course of the month
How many electrons are represented by a dash (-) in a lewis dot structure compound?
A. 2
B. 4
C.3
D. 1
Answers
The dash represents two electrons
In the reaction below, 22 g of H2S with excess
O2 produced 5 g of sulfur.
? H2S + ? O2 → ? S + ? H2O .
What is the percent yield of sulfur?
Answer in units of %.
Answers
Answer:
24.1 %
Explanation:
This is the reaction of oxygen between hydrogen sulfide.
The equation is:
2H₂S + O₂ → 2S + 2H₂O
As the oxygen is the excess, limting reagent is the H₂S.
We convert the mass to moleS: 22g / 34.06 g/mol =
0.646 moles
Ratio is 2:2. 2 moles of sulfide can produce 2 moles of sulfur.
Then, 0.646 moles of sulfide will produce 0.646 moles of S.
We convert the moles to mass: 0.646 mol . 32.06 g/mol =
20.71 g
That's the theoretical yield.
% yield = (produced yield / theoretical yield) . 100
% yield = (5 g/ 20.71g) . 100 = 24.1 %
Which of the following represents a double-displacement reaction?
a. ABC ➡️AB +C
b. A+B ➡️AB
c. AB + CD➡️AD + CB
d. A + BC ➡️AC + B
Answers
AX + BY —> AY + BX
The first letter of the first letter of the 1st reactant and the last letter of the 2nd reactant go together to make a new product. The second letter of the 2nd reactant and the second letter 1st reactant go together.
DNA evidence can be used for what? Creating a representation of a suspect Identifying a species of pollen Matching microbiomes All of the above
Answers
Answer:
multiple things.
Explanation:
DNA evidence collected from a crime scene can be linked to a suspect or can eliminate a suspect from suspicion. During a sexual assault, for example, biological evidence such as hair, skin cells, semen, or blood can be left on the victim's body or other parts of the crime scene.
Answer:
I think it is just a
Explanation:
Elements o fb the same group have the same chemical properties
Answers
Answer:
The chemical elements are arranged in order of increasing atomic number. The horizontal rows are called periods and the vertical columns are called groups. Elements in the same group have similar chemical properties. This is because they have the same number of outer electrons and the same valency.
Ethyl alcohol has a density of 0.80 g/mL. What is the volume of 44g of ethyl alcohol
ANSWER CHOICES
55 mL
35 mL
42 mL
0.80 mL
Answers
Answer:
55mL
Explanation:
44g / 0.8g/mL = 55mL
What is the function of the pistil and stamen of a plant?
To allow the plant to reproduce.
They provide support for the plant.
They protect the plant from the weather.
The protect the plant from predators.
Answers
Answer:
the answer is A
Explanation:
Hopefully u get the answer right
Answer:
A
Explanation:
give me thanks not stars
Which statement describes the feeling interactions between frogs and insects? Select all that apply.
A. The frog is a predator
B. The interactions is mutualistic
C. The frog is a parasite
D. The number of insects can influence the number of frogs in the ecosystem.
Answers
Can any one plz solve and send this question who ever solve this right I will make you brainliest this is physic
Answers
Answer: Energy = 10000J - 2000J = 8000J
Therefore, the energy is dissipated the skier moves down to the slope is 8000J
Explanation:
write four facts of cross breeding plants
Answers
Answer:
Plant breeding
Plant breeding is the science of changing the traits of plants in order to produce desired characteristics. It has been used to improve the quality of nutrition in products for humans and animals.
Explanation:
Consider the following reaction: Solid zinc was added to 1.0 M HC1.
After 20.0 s, the temperature of the container increased by 0.5°C and 25.00 mL of
H2 was produced. The rate of this reaction was
Answers
Answer:
1.25 mL/s
Explanation:
Your are told that 25.0 mL of H2 was produced 20 seconds. This is equal to rate 25/20 = 1.25 mL/s
When a reaction progresses, the reactant concentration gradually decreases and the product concentration gradually increases. Here the rate of the reaction is 1.25 mL/s.
What is rate of reaction?The rate of a chemical reaction is defined as the rate of decrease of concentration of a reactant or the rate of increase of concentration of a product. The rate of the reaction is usually expressed in units mol L⁻¹s⁻¹. The rate of the reaction are affected by several factors like concentration of the reactants, temperature, etc.
An equation which expresses the experimentally observed rate of a reaction in terms of the molar concentration of the reactants which determine the rate of the reaction is called rate equation.
Here it is seen that 25.0 mL of H2 was produced 20 seconds. So the rate is given as:
Rate = 25/20 = 1.25 mL/s
Thus the rate of the reaction is 1.25 mL/s.
To know more about rate of reaction, visit;
https://brainly.com/question/30546888
#SPJ2
. Round to the nearest whole number
.Do not include units in your answer, just the number
1kg=2.2lb
Answers
Answer:
21091mg of aspirin the person need to consume
Explanation:
To solve this question we must find the mass of the person in kg. Knowing the lethal dose for aspirin is 400mg/kg of person, we can find the amount of aspirin that the person need to consume to get a lethal dose:
Mass person:
116lb * (1kg / 2.2lb) = 52.7kg
Lethal dose:
52.7kg * (400mg / kg) =
21091mg of aspirin the person need to consumeHow many moles of iron would be needed to react with 3.82 moles of
oxygen
Answers
The number of moles of iron (Fe) required to react with 3.82 moles of oxygen is 5.09 moles
Balanced equation
3O₂ + 4Fe —> 2Fe₂O₃
From the balanced equation above,
3 moles of O₂ reacted with 4 moles of Fe
How to determine the moles of FeFrom the balanced equation above,
3 moles of O₂ reacted with 4 moles of Fe
Therefore,
3.82 moles of O₂ will react with = (3.82 × 4) / 3 = 5.09 moles of Fe
Thus, 5.09 moles of Fe is needed for the reaction
Learn more about stoichiometry:
https://brainly.com/question/14735801
compare and contrast between combustion and rusting
Answers
Answer:
combustion is fast and destructive it also involves a lot of movement of the atoms where erosion is a slow process that does not involve a lot of energy
How does Sodium turns into another element? By the Nuclear Fusion?
Answers
Answer:If an atom loses or gains a proton, it becomes a new element. For example, if a sodium atom loses a proton, it would become a negative ion of neon. ... In nuclear reactions, like nuclear fusion, the electrons play minor roles and it is the nucleons that interact to create new elements
Explanation:
Answer:
If an atom loses or gains a proton, it becomes a new element. For example, if a sodium atom loses a proton, it would become a negative ion of neon. ... In nuclear reactions, like nuclear fusion, the electrons play minor roles and it is the nucleons that interact to create new elements.
Explanation:
hope this helps!
The empirical formula for butene is
A.
CH2
B.
C₂H4
C.
Ca HG
D
C4H8
Answers
Which statement describes the endothermic reaction represented by this
graph?
Answers
Answer:
Option A, describes the endothermic reaction represented by this graph
Explanation:
In this graph the energy released (or the potential energy) at the time of product formation is lower than the potential energy of the reactants. Hence, additional energy input will be required to form the product. Thus, energy is absorbed during the reaction.
Option A is correct
Answer: energy is given off by the reaction
Explanation:
What is the molar solubility of lead phosphate in water in moles?
Please help?!
Answers
Answer:
Now, the molar solubility of lead(II) phosphate in water is said to be equal to 6.2⋅10−12mol L−1 . This means that in one liter of water, presumably at room temperature, you can only hope to dissolve 6.2⋅10−12 moles of lead(II) phosphate.
Explanation:
Hope this helps!!
what is chemical reaction
Answers
Chemical reaction, a process in which one or more substances, the reactants, are converted to one or more different substances, the products. Substances are either chemical elements or compounds. A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.
calculate the concentration of the solution produced when a 3.2g of sodium chloride is
issolved in 8dm of water.
Answers
Answer:
The concentration of the 3.2 g of sodium chloride in 8 dm³ of water is 6.845 × 10⁻³ M
Explanation:
The concentration of a solution is given as either the ratio of mass to volume, or the ratio of volume to volume or as molarity
[tex]Concentration, C = \dfrac{Mass}{Volume} = \dfrac{Volume}{Volume} = \dfrac{Number \ of \ moles }{Liters \ of \ solution}[/tex]
The number of moles present in 3.2 g of sodium chloride, 'n', is given as follows;
[tex]n = \dfrac{Mass}{Molar \ mass}[/tex]
The molar mass of sodium chloride, NaCl = 58.44 g/mol
n = 3.2 g/58.44 g/mol = 0.0547570157 moles
8 dm³ = 8 Liters
Therefore, the concentration, C = 0.0547570157 moles/(8 liters) = 6.845 × 10⁻³ M
The concentration of the 3.2 g of sodium chloride in 8 dm³ of water = 6.845 × 10⁻³ Molar solution.
Rod cells work best in dim light and enable you to see black, white, and shades of gray.
true
or
not
Answers
True rod cell are best in the dark or dim light.
How many grams of HCl are needed to form 34.5 grams of Cl2?
Answers
Answer:
Expof HCl are required to produce 7.50 moles of ZnCl2? 6. Copper ... When 9.34 g of zinc react with excess hydrochloric acid how many grams of zinc chloride will.lanation:
Determine the pH of a 2.8 ×10−4 M solution
of Ca(OH)2.
Answers
Answer:
pH = 10.75
Explanation:
To solve this problem, we must find the molarity of [OH⁻]. With the molarity we can find the pOH = -log[OH⁻]
Using the equation:
pH = 14 - pOH
We can find the pH of the solution.
The molarity of Ca(OH)₂ is 2.8x10⁻⁴M, as there are 2 moles of OH⁻ in 1 mole of Ca(OH)₂, the molarity of [OH⁻] is 2*2.8x10⁻⁴M = 5.6x10⁻⁴M
pOH is
pOH = -log 5.6x10⁻⁴M
pOH = 3.25
pH = 14-pOH
pH = 10.75What property of water allows the water to cover the astronauts hand?
Answers
Answer:
The tendency for water molecules to stick together causes it to causes spheres in space. ... Magnetic-like molecules on water's surface cause the surface to behave like an elastic skin. Each molecule is pulled with equal tension by its neighbors.J
Explanation:
The half-life of radium-226 is 1,600 years. It decays into radon-222. What fraction of the original amount of radium-226 in a sample will still be radium
after 8,000 years?
A.1/8
B.1/4
c.1/32
D.1/16
Answers
Answer:
Your answer will be C. 1/32
Answer:
C. 1/32
Explanation:
What is the mass of 1 mole of Na3,PO4?
Answers
Answer:
163.940671 grams
Explanation:
You can view more details on each measurement unit: molecular weight of Na3PO4 or grams This compound is also known as Trisodium Phosphate. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Na3PO4, or 163.940671 grams.