Can someone help me asap? It’s due tomorrow. I will give brainiest if it’s correct

The position of point S after dilating will be half of the original. The dilated point S' has been shown below.

What is dilation?

Using a modification known as dilation, an object can be resized. Through dilatation, the objects can be resized or enlarged. This transformation results in a shape that is a perfect replica of the original image. The form's dimensions do vary, though. An expansion or contraction of the original form is required for a dilatation. This shift is referred to as a scale factor.

We are given a graph showing position of point S.

Now, on dilating the point by a scale factor of [tex]\frac{1}{2}[/tex], we get that the point will be located at half of the original.

The point has been located and attached in the image below.

Hence, the required solution has been obtained.

Learn more about dilation from the given link

https://brainly.com/question/30240987

#SPJ1

16.) Mean average deviation= option C

17.) Range of a data set = option E.

18.) First quartile = opinion AB

19.) Second quartile = option B

20.) Third quartile = option A

21.) Interquartile range = option D

To determine the measures of the spread is to match their various definitions to the correct measures given such as follows:

16.) Mean average deviation: The average deviation of data from the mean.

17.) Range of a data set : The difference between the highest value and the lowest value in a numerical data set.

18.) First quartile: The median in the lower half.

19.) Second quartile: The median value in a data set.

20.) Third quartile: The median in the upper half.

21.) Interquartile range: The distance between the first and the third quartile.

Learn more about range here:

https://brainly.com/question/26098895

#SPJ1

The question "What are the prices of the computers?" is not a statistical question.

A statistical question is a question that can be answered by collecting and analyzing data. It usually involves some variability or variation in the data, and the answer may vary depending on the sample or population being studied.

In this case, the question is asking for a specific piece of information - the prices of the computers - which can be obtained directly from the store or manufacturer. There is no variability or variation involved, and the answer is not dependent on any data collection or analysis.

Therefore, this question is not a statistical question.

Read more about statistical question at

https://brainly.com/question/12723688

#SPJ1

If a hypothesis test is performed and fails to reject the null hypothesis, it would mean that there is not enough evidence to support the claim that less than 15% of the marketing organization's employees are paid minimum wage.

Therefore, it would not be concluded that the claim is true. The null hypothesis assumes that the claim is false or that the percentage of employees paid minimum wage is not significantly different from 15%.

The failure to reject the null hypothesis means that the evidence does not contradict the null hypothesis, but it does not necessarily prove it to be true.

Learn more about hypothesis:

https://brainly.com/question/10854125

#SPJ11

Mambo needs to save R2,322.06 per month to reach her retirement goal of R1,000,000 in 40 years, assuming an annual interest rate of 8% compounded monthly.

Using the formula for the future value of an annuity, we can solve for the monthly payment Mambo needs to make:

[tex]FV = P * [(1 + r/n)^{(nt)} - 1]/(r/n)[/tex]

where FV is the future value, P is the monthly payment, r is the annual interest rate, n is the number of times interest is compounded per year, and t is the number of years.

Given that Mambo has 40 years until retirement, and the interest rate is 8% per year compounded monthly, we can substitute these values into the formula:

[tex]FV = 1,000,000 \\P = ?\\r = 0.08\\n = 12\\t = 40 \\1,000,000 = P * [(1 + 0.08/12)^(12*40) - 1]/(0.08/12)[/tex]

Solving for P, we get:

P = 2,322.06

To know more about annual interest rate, here

brainly.com/question/30573341

#SPJ4

--The complete Question is, Mambo is 25 years old and currently earns R5595 per month. She wants to retire at age 65 and wishes to have R1,000,000 by then. Assuming Mambo can invest her savings at an annual interest rate of 8%, compounded monthly, how much should she save each month to reach her retirement goal?--

Answer: The formula for the surface area of a cylinder is:

SA = 2πr^2 + 2πrh

where SA is the surface area, r is the radius, and h is the height.

In this case, we know that the surface area is 936π square meters and the radius is 13 meters. So we can plug those values into the formula and solve for h:

936π = 2π(13^2) + 2π(13)(h)

Simplifying:

936π = 338π + 26πh

936π - 338π = 26πh

598π = 26πh

h = 598/26 = 23

Therefore, the height of the cylinder is 23 meters.

Step-by-step explanation:

Step-by-step explanation:

you made some mistakes with the formula.

the surface area of a cylinder is

the outside mantle area

+

the 2 circle areas on top and bottom.

the outside mantle area is

2×pi×radius×height

the 2 circle areas are

2 × pi×radius²

in total that is

2×pi×radius×height + 2×pi×radius² =

2×pi×radius×(height + radius) = 936pi

2×pi×13×(height + 13) = 936pi

pi×(height + 13) = 36pi

height + 13 = 36

height = 36 - 13 = 23 m

The probability that a randomly selected student will be taller than 63 inches tall is 0.9332, to the nearest thousandth.

The probability of heads is 3 times that of tails, so the probability of heads is 0.75 and the probability of tails is 0.25.

Assign a probability of 0.5 to heads

Assign a probability of 0.25 to tails

When a biased coin is tossed the probability of heads is three times as likely to come up as tails.

To find the probability that should be assigned to the outcome of heads and tails the first step is to calculate the probability of heads.

Once this is done,

The probability of heads can be assigned a value of 0.5 and the probability of tails can be assigned a value of 0.25.

After that,

The probability of heads and tails can be calculated accordingly.

The probability of heads and tails when a biased coin is tossed, the first step is to calculate the probability of heads.

Once this is done the probability of heads can be set to 0.5 and the probability of tails can be set to 0.25.

With these probabilities assigned the probability of heads is three times that of tails.

For similar question on probability:

https://brainly.com/question/30034780

#SPJ11

The number of possible letter combinations in the words presented is as follows:

CANNON: 2520

BANANA: 120

TOMORROW: 2520

REFERENCE: 20160

It is used to determine how many distinct arrangements can be made from a given set of elements.

1) CANNON: CANNON is made up of seven letters, two of which are identical 'N's. So, the following formula can be used to get the total number of permutations for CANNON:

Total number of permutations = 7! / 2!

= (7 x 6 x 5 x 4 x 3 x 2 x 1) / 2!

= 2520

2) BANANA: BANANA is made up of six letters, three of which are the letter 'A' and are similar. The total amount of BANANA combinations can be calculated using the formula below:

Total number of permutations = 6! / 3!

= (6 x 5 x 4 x 3 x 2 x 1) / 3!

= 120

3) TOMORROW: The word TOMORROW is made up of seven letters, two of which are identical 'O's. Thus, the sum of TOMORROW's permutations can be determined as follows:

Total number of permutations = 7! / 2!

= (7 x 6 x 5 x 4 x 3 x 2 x 1) / 2!

= 2520

4) REFERENCE: Eight letters make up REFERENCE, two of which are identical 'E's. So, the following formula can be used to determine the total number of permutations for REFERENCE:

Total number of permutations = 8! / 2!

= (8 x 7 x 6 x 5 x 4 x 3 x 2 x 1) / 2!

= 20160

To know more about permutations, visit:

https://brainly.com/question/28065038

#SPJ1

Organizational skills

Organizational skills and the ability to communicate effectively are crucial for a systems analyst who needs to work with individuals at all levels of an organization, manage conflicting user needs, and ensure that information is communicated clearly and efficiently. Interpersonal skills are important to a systems analyst who must work with people at all organizational levels, balance conflicting needs of users, and communicate effectively. The knowledge and skills in leadership and strategic management are essential for the creation and achievement of an organizational vision and strategy. These skills include effective communication, decision-making, and the ability to evaluate and measure success, as well as a deep understanding of the organization and its environment. Leadership and strategic management play a crucial role in the success of any organization. A strong and effective leader with a well-developed understanding of strategic management is essential for the creation and achievement of an organizational vision and strategy.

Learn more about Organizational skills here: brainly.com/question/30471901

#SPJ11

Answer:

6.8 ounces

To set up a hypothesis test for this production process, we need to define the null and alternative hypotheses. The null hypothesis (H0) is that the average amount of soda in each can is equal to 6.8 ounces, while the alternative hypothesis (Ha) is that the average amount of soda in each can is not equal to 6.8 ounces.

We can then collect data by taking regular random samples from the production process and calculate the sample mean and standard deviation. We can then perform a statistical test such as a t-test or z-test to determine whether we can reject or fail to reject the null hypothesis.

If we reject the null hypothesis, we can conclude that there is evidence that the average amount of soda in each can is different from 6.8 ounces. If we fail to reject the null hypothesis, we cannot conclude that there is evidence that the average amount of soda in each can is different from 6.8 ounces.

I hope this helps! Let me know if you have any other questions.

The total surface area of the given figure is 619.2 in², which is not listed in the provided options.

The surface area is known to be measure of the total area occupied by the surface of the object. Defining the surface area mathematically in the presence of a curved surface is better than defining the arc length of a one-dimensional curve, or the surface area of ​​a polyhedron (i.e. an object with flat polygonal faces). Much more complicated. For a smooth surface sphere such as the following, surface area is assigned using representation as a parametric surface. This surface definition is based on calculus and includes partial derivatives and double integrals.

The triangular face of the given figure represent an equilateral triangle of sides 12 in.

Area of the triangle = (√3/4) × a²

Area of the triangular face:

= (√3/4) × 12²

= (√3/4) × 144

= 57.6 in²

Area of the rectangle = Length × width

Area of the rectangular face:

= 12 × 14

= 168 in²

Area of the given figure:

= (2 × 57.6) + (3 × 168)

= 115.2 + 504

= 619.2 in²

To know more about polygonal faces, visit:

https://brainly.com/question/16550007

#SPJ1

Answer: The dividend yield is the annual dividend payment divided by the stock's current market price, expressed as a percentage.

Dividend yield = (Annual dividend payment / Stock's current market price) x 100%

In this case:

Annual dividend payment = $1.98

Stock's current market price = $41.68

Dividend yield = ($1.98 / $41.68) x 100% = 4.75%

Therefore, the dividend yield for AT&T is 4.75%.

Step-by-step explanation:

Event "X or Y": A, B, C, E, G. Event "X and Y": C. The complement of event X: D, E, F, G.

The sample space for this problem is {A, B, C, D, E, F, G}, since there are seven tiles labeled with the first seven letters of the alphabet.

Event X: The letter selected comes before "D". Outcomes in this event are A, B, and C.

Event Y: The letter selected is found in the word "CAGE". Outcomes in this event are A, C, E, and G.

Event "X or Y": Outcomes in this event are any outcomes from event X along with any outcomes from event Y. So the outcomes in the event "X or Y" are A, B, C, E, and G.

Event "X and Y": The outcomes in the event "X and Y" are the outcomes from event Y that also occur in event X. So the only outcome in the event "X and Y" is C.

The complement of event X: The complement of event X is the event consisting of all possible outcomes not in the event X. So the outcomes in the complement of event X are D, E, F, and G.

To know more about complement of event:

https://brainly.com/question/30212841

#SPJ4

--The given question is incomplete, the complete question is given

" A tile is selected from seven tiles, each labeled with a different letter from the first seven letters of the alphabet. The letter selected will be recorded as the outcome. Consider the following events. Event X: The letter selected comes before "D". Event Y: The letter selected is found in the word "CAGE". Give the outcomes for each of the following events. If there is more than one element in the set, separate them with commas.

(a) Event "X or Y":

(b) Event "X and Y":

(c) The complement of the event X: "--

Answer:

To write the equation of the line that passes through the points (2, -4) and (0, -4), we can use the point-slope form of a linear equation, which is:

y - y1 = m(x - x1)

Where (x1, y1) is one of the points on the line, and m is the slope of the line.

In this case, both points have the same y-coordinate, which means that the line is horizontal and has a slope of 0. We can choose either point to use in the equation, so let's use (2, -4):

y - (-4) = 0(x - 2)

Simplifying this equation, we get:

y + 4 = 0

y = -4

So the equation of the line that passes through the points (2, -4) and (0, -4) is y = -4, which is a horizontal line at y-coordinate -4.

Answer:

the angles which are formed in matching corners or corresponding corners with the transversal when two parallel lines are intersected by any other line

In the event that a monopolistic firm takes over superbly competitive advertising, we would anticipate seeing the advertising cost of the great rise and the amount sold drop.

Be that as it may, when a monopolistic firm takes over the showcase, it picks up showcase control and the capacity to impact the cost. The monopolist can charge a better cost than the competitive advertising cost since there are no near substitutes for its item. As the monopolist raises the cost, the amount requested will drop, as customers switch to substitutes or decrease their utilization of the item.

we would anticipate seeing the advertising cost of the great rise and the amount sold fall as the monopolist tries to extend benefits by raising costs. This is often in differentiating from impeccably competitive advertising.

To learn about monopolistic firms visit:

https://brainly.com/question/13806356

#SPJ4

The probability that a randomly selected carton has a puncture or a smashed corner is 0.076, or 7.6%.

What is probability?

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain to happen.

To find the probability that a randomly selected carton has a puncture or a smashed corner, we can use the formula:

P(puncture or smashed corner) = P(puncture) + P(smashed corner) - P(puncture and smashed corner)

where P(puncture) is the probability of a carton having a puncture, P(smashed corner) is the probability of a carton having a smashed corner, and P(puncture and smashed corner) is the probability of a carton having both a puncture and a smashed corner.

Substituting the given probabilities into the formula, we get:

P(puncture or smashed corner) = 0.03 + 0.06 - 0.014

P(puncture or smashed corner) = 0.076

Therefore, the probability that a randomly selected carton has a puncture or a smashed corner is 0.076, or 7.6%.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ1

The power series method can be used to solve a nonhomogeneous differential equation about an ordinary point by finding both a homogeneous and particular solution using a series expansion and the method of undetermined coefficients.

The power series method is a technique used to find a series solution of a differential equation. When applied to a nonhomogeneous differential equation, the method involves finding both a homogeneous solution and a particular solution.

Assuming that the nonhomogeneous differential equation has the form

y''(x) + p(x)y'(x) + q(x)y(x) = f(x)

where p(x), q(x), and f(x) are functions of x, we can begin by finding the solution to the associated homogeneous equation

y''(x) + p(x)y'(x) + q(x)y(x) = 0

Using the power series method, we can assume a solution of the form:

y(x) = a0 + a1(x - x0) + a2(x - x0)^2 + ...

where a0, a1, a2, ... are constants to be determined, and x0 is the ordinary point of the differential equation.

Next, we can find the coefficients of the power series by substituting the series solution into the differential equation and equating coefficients of like powers of (x-x0). This leads to a system of equations for the coefficients, which can be solved iteratively.

After finding the homogeneous solution, we can find a particular solution using a similar method. Assuming a particular solution of the form:

y(x) = u(x) + v(x)

where u(x) is a solution to the associated homogeneous equation, and v(x) is a particular solution to the nonhomogeneous equation, we can use the method of undetermined coefficients to find v(x). This involves assuming a form for v(x) based on the form of f(x), and then solving for its coefficients using the same technique as before.

Once we have found both the homogeneous and particular solutions, we can combine them to obtain the general solution to the nonhomogeneous differential equation.

Learn more about nonhomogeneous differential equation here

brainly.com/question/30876746

#SPJ4

Step-by-step explanation:

+ 1.25

every new term is the previous term + 1.25.

with starting value -1.75

f(n) = 1.25n - 1.75

a) The percentage of batteries the company expects to replace is:

0.1271 * 100% = 12.71%

b) The company should guarantee the batteries for 34 months (rounded to the nearest month) to ensure that refunds are not made for more than 9% of its batteries under the full-refund guarantee policy.

(a) Let X be the random variable representing the life of a battery. We want to find the probability that a battery fails within 36 months after purchase, which is equivalent to finding P(X ≤ 36).

Using the normal distribution formula with mean μ = 44 months and standard deviation σ = 7 months, we have:

Z = (X - μ) / σ = (36 - 44) / 7 = -1.14

Using a standard normal table or calculator, we find that the probability of a standard normal variable being less than or equal to -1.14 is 0.1271. Therefore, the percentage of batteries the company expects to replace is:

0.1271 * 100% = 12.71% (rounded to two decimal places)

(b) Let Y be the random variable representing the length of the guarantee period in months. We want to find the value of Y such that P(X ≤ Y) = 0.09, where X has the same normal distribution with mean μ = 44 months and standard deviation σ = 7 months.

Using the inverse normal distribution formula with mean μ = 44 months and standard deviation σ = 7 months, we have:

Z = invNorm(0.09) = -1.34

where invNorm is the inverse normal function. Solving for Y, we have:

(Y - μ) / σ = Z

(Y - 44) / 7 = -1.34

Y - 44 = -1.34 * 7

Y ≈ 34.42

Therefore, the company should guarantee the batteries for 34 months (rounded to the nearest month) to ensure that refunds are not made for more than 9% of its batteries under the full-refund guarantee policy.

Learn more about percentage of batteries.

brainly.com/question/17086286

#SPJ11

The lower and upper control limits that the manufacturer should use in the resulting control chart are LCL = 0.023,UCL = 0.043

To calculate the lower and upper control limits for the control chart, we need to use the following formula:
Lower control limit (LCL) = average proportion of defects - 3 x square root of [(average proportion of defects x (1 - average proportion of defects)) / sample size]
Upper control limit (UCL) = average proportion of defects + 3 x square root of [(average proportion of defects x (1 - average proportion of defects)) / sample size]
Using the given information, we can plug in the values to get:
LCL = 0.01 - 3 x square root of [(0.01 x 0.99) / 30] = -0.023
UCL = 0.01 + 3 x square root of [(0.01 x 0.99) / 30] = 0.043
However, since control limits cannot be negative, the lower control limit should be set to zero.

Learn more about Lower control limit here:

https://brainly.com/question/29578908

#SPJ11

The manufacturer should use control limits of 0 for the lower limit and 0.136 for the upper limit in their control chart for monitoring the proportion of unacceptable phones in their quality assurance program.

Determine the lower and upper control limits for the manufacturer's control chart, we first need to calculate the standard deviation of the proportion of unacceptable phones based on the given information.
To do this, we can use the formula:
[tex]Standard deviation = \sqrt(p\times(1-p)/n)[/tex]
p is the proportion of unacceptable phones (0.01), and n is the sample size (30 phones per day for 7 days = 210 total phones).
Plugging in these values, we get:
[tex]Standard deviation = \sqrt(0.01\times(1-0.01)/210) = 0.042[/tex]
Next, we can use this standard deviation to calculate the control limits. The lower control limit (LCL) is given by:
[tex][tex]LCL = p - 3\times\sqrt(p\times(1-p)/n)[/tex][/tex]
and the upper control limit (UCL) is given by:
[tex]UCL = p + 3\times\sqrt(p\times(1-p)/n)[/tex]
Plugging in our values, we get:
[tex]LCL = 0.01 - 3\times0.042 = -0.075[/tex]
[tex]UCL = 0.01 + 3\times0.042 = 0.095[/tex]
Values don't make sense - the proportion of unacceptable phones cannot be negative, and the UCL is above 1, which is also impossible.
To correct for this, we can use the formula:
[tex]LCL = max(0, p - 3\times\sqrt(p\times(1-p)/n))[/tex]
[tex]UCL = min(1, p + 3\times\sqrt(p\times(1-p)/n))[/tex]
This ensures that the control limits are within the range of possible values for the proportion of unacceptable phones.
Plugging in our values with this formula, we get:
[tex]LCL = max(0, 0.01 - 3\times0.042) = 0[/tex]
[tex]UCL = min(1, 0.01 + 3\times0.042) = 0.136[/tex]

For similar questions on control limit

https://brainly.com/question/29512700

#SPJ11

In the given triangle, α is equal to 67.36°.

What is a triangle's definition?

A triangle is a two-dimensional closed geometric form that has three sides, three angles, and three vertices (corners). It is the most basic polygon, produced by joining any three non-collinear points in a plane. The sum all angles of a triangle is always 180°. Triangles are classed according to their side length (equilateral, isosceles, or scalene) and angle measurement (acute, right, or obtuse).

Now,

Using Trigonometric functions

We can use the sine function

So,

Sin α=Perpendicular/Hypotenuse

Sin α = 12/13

α=67.36°

Hence,

           The value of α will be 67.36°.

To know more about triangles visit the link

brainly.com/question/2773823

#SPJ1

So the transformation is: (x, y) → (x + -8, y - 4) which is equivalent to option B.

In mathematics, a transformation is a process that manipulates the position, size, or shape of a geometric object. Transformations can include translations, rotations, reflections, and dilations. They are used to study geometric properties and relationships and are often used in fields such as geometry, algebra, and computer graphics. Transformations are important in understanding symmetry and congruence, as well as in solving problems involving geometric figures.

Here,

We can see that the transformation takes each point of the form (x, y) in ABC to a corresponding point of the form (x', y') in A'B'C'. To find the correct transformation, we need to determine how the coordinates of the points in ABC are related to the coordinates of the corresponding points in A'B'C'. One way to do this is to use the fact that the transformation should preserve the relative distances and angles between the points. Another way is to use the known coordinates of three corresponding points to determine the transformation directly.

In this case, we can see that the transformation maps (-3,-2) to (5,2), (-1,-4) to (7,0), and (-6,-5) to (2,-1). We can use these points to find the transformation:

(x, y) → (x', y')

To map (-3,-2) to (5,2), we need to add 8 to the x-coordinate and add 4 to the y-coordinate:

x' = x + 8

y' = y + 4

To map (-1,-4) to (7,0), we again add 8 to the x-coordinate, but this time we only add 4 to the y-coordinate:

x' = x + 8

y' = y + 4

To map (-6,-5) to (2,-1), we subtract 4 from the x-coordinate and subtract 4 from the y-coordinate:

x' = x - 4

y' = y - 4

To know more about transformation,

https://brainly.com/question/29641135

#SPJ1

1745 packages of tennis balls can be made from 5235 balls.

Determine the number of packages of tennis balls that can be made, we need to divide the total number of balls by the number of balls in each package.

5235 tennis balls and each package contain 3 balls.

Therefore, we can use the following formula:
Number of Packages = Total Amount of Balls / Number of Balls in Each Package
Substituting the values given in the problem, we get:
Number of Packages = 5235 / 3
Simplifying this expression, we get:
Number of Packages = 1745
It is important to note that there may be some leftover tennis balls that cannot be evenly divided into packages of 3.

Determine how many leftover balls there are and decide what to do with them.

For similar questions on Word problems

https://brainly.com/question/13818690

#SPJ11

The actual height of the statue is option C 231.2 feet.

A scale factor is a number used in mathematics to scale or multiply a quantity or measurement by another factor in order to establish a proportional relationship between two identical figures or objects.

In other terms, the scale factor is the ratio of the corresponding lengths, widths, or heights of the two figures or objects if they are similar, that is, they have the same shape but may range in size. This implies that you may determine the dimension of the second object by multiplying one dimension of one object by the scale factor.

Given that the scale factor is 230:1.

Thus,

actual height of statue / 230 = height of drawing / 1.2 feet

Now,

actual height of statue = (1.2 feet / 1.2 feet) * 230

actual height of statue = 230 feet

Hence, the actual height of the statue is option C 231.2 feet.

Learn more about scale factor here:

https://brainly.com/question/29464385

#SPJ1

Answer:

26

Step-by-step explanation:

You just divide 133 and 5 and you get 26.6

Answer:

26

Step-by-step explanation:

[tex]\frac{133}{5}[/tex] = 26.6

You cannot buy part of a book, so you can buy 26 books

26 x 5 = 130.  You will have $3.00 left over.

Helping in the name of Jesus.

Answer:

225 trains

Step-by-step explanation:

since they are using the same process and materials, we expect them to have the same ratio between trains made and defective trains :

600 / 30 = 20/1

one out of 20 is defect.

so, when they make 4500 trains, we need to divide this by 20 to get the number of expected defective trains :

4500 / 20 = 225

I find the answer option of 6000 defective trains really funny : if that were true, more than the produced trains (4500) would be defective. how ... ?

The slope of the line in the reduced form is 4 / 7.

The slope of a line is the change in the dependent variable with respect to the change in the independent variable.

Therefore,

slope = m = change in y / change in x

slope = m = y₂ - y₁ / x₂ - x₁

P = (2, 3)

Q = (9, 7)

x₁ = 2

x₂ = 9

y₁ = 3

y₂ = 7

Therefore,

slope = 7 - 3 / 9 - 2

slope = 4 / 7

learn more on slope here: https://brainly.com/question/26578510

#SPJ1

The esteem of the standard error of the estimate (to two decimal places) is 1.34.

To calculate the standard blunder of the gauge (moreover known as the standard blunder of the relapse or the root cruel square, we ought to utilize the taking after equation:

SE = sqrt [ (Σ(y - yhat)[tex]^{2}[/tex]) / (n - k) ]

yhat = 0.471x + 2.606

We too know that there are 5 perceptions, and there's one free variable (x). Utilizing the information from the Exceed expectations record, ready to calculate the anticipated values of y for each perception by stopping the x values into the relapse condition:

yhat1 = 2.696

yhat2 = 3.638

yhat3 = 4.581

yhat4 = 5.524

yhat5 = 6.466

SE = sqrt [ ( (4.75 - 2.696)[tex]^{2}[/tex] + (5.36 - 3.638)[tex]^{2}[/tex]+ (5.95 - 4.581)[tex]^{2}[/tex] + (6.66 - 5.524)[tex]^{2}[/tex]+ (7.03 - 6.466)[tex]^{2}[/tex]) / (5 - 2) ]

SE = sqrt [ (5.3546) / 3 ]

SE = 1.335

To learn about standard error visit:

https://brainly.com/question/30667112

#SPJ4