The Kentucky Derby is a 1¼ mile race. Mandaloun ran it in 1.52 minutes. Hot Rod Charlie ran at a speed of .79 miles per minute. Who won the race?
Answer:
Mandaloun won the race.
Explanation:
First, we will calculate the time taken by the Hot Rod Charlie:
[tex]s = vt\\t = \frac{s}{v}[/tex]
where,
t = time taken by Hot Rod Charlie = ?
s = distance covered = 1.25 miles
v = speed of Hot Rod Charlie = 0.79 miles/min
Therefore,
[tex]t = \frac{1.25\ miles}{0.79\ miles/min} \\t = 1.58 min[/tex]
Since Hot Rod Charlie took more time (1.58 min) than the Mandaloun (1.52 min).
Therefore Mandaloun won the race.
plsssss asappppppppp
Answer:
20 meters.
Explanation:
In the graph, the x-axis (the horizontal axis) represents the time, while the y-axis (the vertical axis) represents the distance.
If we want to find the distance covered in the first T seconds, you need to find the value T in the horizontal axis.
Once you find it, we draw a vertical line, in the point where this vertical line touches the graph, we now draw a horizontal line. This horizontal line will intersect the y-axis in a given value. That value is the total distance travelled by the time T.
In this case, we want to find the total distance that David ran in the first 4 seconds.
Then we need to find the value 4 seconds in the horizontal axis. Now we perform the above steps, and we will find that the correspondent y-value is 20.
This means that in the first 4 seconds, David ran a distance of 20 meters.
State one similarity between rotatory and circular motion
Answer:
The main difference between these types of motion is that circular motion is a special case of rotational motion, where the distance between the body’s centre of mass and the axis of rotation remains fixed.
Rotational motion is based around the idea of rotation of a body about its center of mass. In rotational motion, the axis of rotation and centre of mass could change whereas in circular motion, the axis of rotation and centre of mass does not change.
Circular motion is a movement of an object along the circumference of a circle or rotation along a circular path and can either have a constant angular rotation rate and constant speed, or it can exist with a changing rate of rotation.
Think of one of those fairground rides where people sit on dummy horses. Now imagine the horses spin around the post that holds them to the base of the ride. Then you have both rotational motion of the horse and circular motion as the horses move around the ride.
A nucleus splits to form two or more smaller nuclei during which process?
A. Positron emission
B. Nuclear fission
C. Nuclear fusion
O D. Gamma decay
Answer:
nuclear fission
A change in state is considered a
A.
Chemical change
B.
Physical Change
C.
Element
D.
Density
[tex]\huge{ \mathfrak{ \underline{Áñswér: }}}[/tex]
A change in state is considered a :
[tex] \hookrightarrow { \mathbb{\: physical \: change}}[/tex]
[tex]\#TeeNForeveR [/tex]
Any help would be great! Thank you x
Giving brainliest answer xoxo
Answer:
A vacuum would have been created. I hope this helps have a great day
PLS HELP ME ANSWER THESE 2 QUESTIONS lol
Answer:
a) Yes, this is kinda the best way to split the teams.
b) Force (or acceleration, these are proportional)
Explanation:
For both questions, we should start with the second Newton's law.
This law can be written as:
F = m*a
force equals mass times acceleration.
a) For the case of the rope, the ideal situation is having almost the same mass in both ends of the rope, in this way, the relation between force and acceleration in each end will be equivalent. (while one could argue that 3 smaller people will actually have a larger mass than the two bigger ones) but yes, this way is a good way to split the teams, so the mass is as even as possible.
b) Acceleration is defined as the rate of change of the velocity.
Again, by the above equation:
F = m*a
We need to have a force if we want to have acceleration.
Then, if an object has constant velocity (if the object is at a full stop, then it has a constant velocity of 0 m/s) we need to apply a force to this object if we want to change its motion.
Similarly, if an object is accelerating, we can apply a force to the object in order to cancel that acceleration (if the net force applied in the object is zero, then the acceleration is zero)
So here we can conclude that a force is what causes an object to change its motion.
A spring has 100 J of EPE when it is stretched 2 m. What is the spring constant?
A. 100 N/m
B. 50 N/m
C. 200 N/m
D. 150 N/m
Answer:
B: 50 N/m
Explanation:
Hopes it help.
The spring constant of the spring is 50 N/m. The correct option is B.
What is spring potential energy?When the spring is compressed, it gets compressed up to its elastic limit. When load is removed from the spring, it regains its shape and obtains equilibrium position. The energy stored in this process is called as spring potential energy.
Given a spring has 100 J of EPE when it is stretched 2 m. The energy stored in the spring is given by
SPE = ½ kx²
100 = ½ k (2 m)²
k = 50 N/m
So, spring constant of the spring is 50 N/m.
Thus, the correct option is B.
Learn more about spring potential energy.
https://brainly.com/question/12528339
#SPJ2
Microwaves travel at the speed of light, 3x108m/s. When frequency of the microwaves is 9x109 Hz, quantitatively translate this information into their wavelength and period. Wavelength= 0.03m; period 1.1x10-10s , , Wavelength= 0.03m; period 1.1x10 -10 s, Wavelength= 0.03m; period 1.1x10-10s Wavelength= 0.03m; period 1.1x10 -10 s, Wavelength = 0.03cm; period 1.1x109s Wavelength = 0.03cm; period 1.1x10 9 s, Wavelength=0.03m; period 1.1x1010s
Explanation:
Given that,
The frequency of microwaves, [tex]f=9\times 10^9\ Hz[/tex]
The time period of the wave is :
[tex]t=\dfrac{1}{f}\\\\t=\dfrac{1}{9\times 10^9}\\\\t=1.1\times 10^{-10}\ s[/tex]
Let [tex]\lambda[/tex] is the wavelength of the wave. We know that,
[tex]v=f\lambda\\\\\lambda=\dfrac{v}{f}[/tex]
Put all the values,
[tex]\lambda=\dfrac{3\times 10^8}{9\times 10^{9}}\\\\\lambda=0.03\ m[/tex]
Hence, this is the required solution.
How can light be both a wave and a particle? What does that mean?
Answer:
Explanation:
Quantum mechanics tells us that light can behave simultaneously as a particle or a wave. However, there has never been an experiment able to capture both natures of light at the same time; the closest we have come is seeing either wave or particle, but always at different times.When UV light hits a metal surface, it causes an emission of electrons. Albert Einstein explained this "photoelectric" effect by proposing that light – thought to only be a wave – is also a stream of particles
Why is light considered a wave and a particle?
Light behaves mainly like a wave but it can also be considered to consist of tiny packages of energy called photons. Photons carry a fixed amount of energy but have no mass. They also found that increasing the intensity of light increased the number of electrons ejected, but not their speed
Model A: Two sponge balls representing two atoms are soaked in water. You hold one ball, and your friend holds the other. Then you press the two balls together. As you press them together, water leaks out. What type of reaction does this model represent?
:) thnx, please don't just answer for points
Answer:
The type of reaction represented by the model is an;
Exothermic reaction
Explanation:
Exothermic reaction reaction is a reaction that involves the giving off of excess energy as heat and or light by two or more reactants during a chemical reaction due to the higher combined energy of the reactants compared with the product
The analogy are;
The sponge balls are the reacting atoms
The water is the energy which they contain
The water given off is the excess energy which the compound formed by putting together the two soaked sponge balls is unable to hold.
a microwave with a frequency of 5.0 x 10^10 hertz has a period of
Answer:
A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.
Explanation:
Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).
The period is the time that elapses between the emission of two consecutive waves. In other words, it is the time it takes for a complete wave to pass a reference point. The period (T) is simply the inverse of the frequency (f):
[tex]T=\frac{1}{f}[/tex]
In this case, f=5*10¹⁰ Hz. So, replacing in the definition of period T:
[tex]T=\frac{1}{5*10^{10} Hz }[/tex]
Solving:
T= 2*10⁻¹¹ seconds
A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.
A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.
What is fequency?The fequency is defined as the number of cycles achieved by the any wave it is expressed in hertz.
Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).
The period is the time that elapses between the emission of two consecutive waves. In other words, it is the time it takes for a complete wave to pass a reference point. The period (T) is simply the inverse of the frequency (f):
[tex]T=\dfrac{1}{f}[/tex]
In this case, f=5*10¹⁰ Hz. So, replacing in the definition of period T:
[tex]T=\dfrac{1}{5\times 10^{10}}=2\times 10^{-11}\ Sec[/tex]
A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.
Thus a microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.
To know more about Frequency follow
https://brainly.com/question/25699025
Imagine that a 1200 kg vehicle speeds up from rest to 20.0 m/s in 80 m.
How much work was done on the car? (Answer in 3 sig figs)
Correct question:
Imagine that a 1200 kg vehicle speeds up from rest to 20.0 m/s in 80 s.
How much work was done on the car? (Answer in 3 sig figs)
Answer:
the work done on the vehicle is 2.40 x 10⁵ J
Explanation:
Given;
mass of the vehicle, m = 1200 kg
initial velocity of the vehicle, u = 0
final velocity of the vehicle, v = 20 m/s
time of motion of the vehicle, t = 80 s
The distance moved by the vehicle is calculated as;
[tex]s = (\frac{v + u}{2} )t\\\\s = (\frac{20+ 0}{2} )(80)\\\\s = 800 \ m[/tex]
The force applied to the vehicle is calculated as;
[tex]F = ma = \frac{m v}{t} = \frac{1200 \times 20}{80} = 300 \ N\\\\[/tex]
The work done on the vehicle is calculated as;
W = F x d
W = 300 x 800
W = 2.4 x 10⁵ J.
Therefore, the work done on the vehicle is 2.40 x 10⁵ J
What is the difference in length between the longest ski trail and the shortest ski trail?
Answer:
Please provide more information!
Explanation:
Answer:
1.75
Explanation:
Most consumers first spend their disposable income on what
Answer:
They first spend it on necessities.
Calculate the work done by a 4.2 N force pushing a 450. g sandwich across a table 0.8 m wide.
Answer:
3.36 Joules
Explanation:
Work done= Force × distance
F=4.2 N
distance= 0.8 m
work done= 4.2 × 0.8
work done= 3.36 Joules
the light beam falls on the surface of the mirror at an angle of 50 ° and is reflected. What is the magnitude of the reflection angle of that fiber?
Answer:
The Magnitude of the angle of reflection equals that of Incidence from the Law of reflection
So its 50°.
Explanation:
Can some one help me with this question its hard :( down below ill give brainliest
1.) A ball is thrown horizontally from the top of a building. What is the vertical velocity of the ball after 1 second?
A. 0 m/s
B. 9.8 m/s
C. 4.9 m/s
D. 19.6 m/s
2.) This is a required question
What is the horizontal acceleration of a projectile?
A. 0 m/s2
B. 8.9 m/s2
C. 4.9 m/s2
D. 9.8 m/s2
3.) If air resistance is neglected, at what angle a projectile must be projected to attain the maximum range?
A. 40
B. 75
C. 45
D. 90
4.) Neglecting air resistance, the range of a projectile projected at an angle of 20 degrees is the same as that of _______ if they were released with the same velocity.
A. 50
B. 70
C. 60
D. 80
5.) What do you call the motion of an object with constant acceleration?
A. circular motion
B. uniform motion
C. constant motion
D. uniformly accelerated motion
CAN SOMEONE PLEASE HELP ASAP. THANK U
Q.1 - V = u + at
u = 0, a = g = 9.8, t = 1
V = 0+9.8*1 = 9.8 m/s
Q 2- In horizontal position the velocity remains same hence a= dv/t, since change in velocity is zero the acceleration also equal to zero
Q.3- After neglecting the air resistance at 45° angle the maximum range is obtained.
let's prove, consider the range have maximum angle at θ, now range is given by
R = u²Sin2θ/g where sin2θ can we written as 2sinθ.cosθ.
Now the range value is directly proportional to the product of sin & cos of firing angle & this maximum value is obtained at 45°
Q.4 The range of two angle will be same if and only if they give 90° on addition.
20+x = 90,
x = 90-20 = 70°
Q.5 The motion with constant acceleration is known as uniformly accelerated motion.
Thanks for joining brainly community!
Answer:
B. 9.8 m/sA. 0 m/s²C. 45°B. 70°D. uniformly accelerated motionExplanation:
1.
u=0m/s
v=?
a=9.8m/s²
t=1sec
now
we have
v=u+at
v=0+9.8*1
v=9.8m/s
3.
angle is measured in sin and cos angle where maximum angle's value is gained by 45°
4.
we have
range
R=[tex]\frac{u²sin2\theta}{g}[/tex]
For
angle =20°
R1=[tex]\frac{u²sin2*20}{g}[/tex].......[1]
another angle be [tex]\theta[/tex]
R2=[tex]\frac{u²sin2\theta}{g}[/tex].......[2]
since R1=R2
By comparing we get
Sin40=Sin([tex]2\theta[/tex])
Sin(180-40)=Sin([tex]2\theta[/tex])
we
140=[tex]2\theta[/tex]
[tex]\theta[/tex]=70°
Chang wants to build a circuit that will light up the bulb from a flashlight. Which component could Chang leave out and still light up the bulb? the switch the battery the wire the light bulb
We could choose to leave out the switch and simply join the wires together and the bulb will still light up.
What is a circuit?A circuit is defined as pathway that has been designed for the flow of current. Now we know that a circuit must have a battery, connecting wires and the bulb itself.
However, we could choose to leave out the switch and simply join the wires together and the bulb will still light up.
Learn more about circuit: https://brainly.com/question/365923
A circuit has an overall resistance of 40 ohms and a current of 200mA.
What is the potential difference in this circuit?
Answer:
Hey!
_________________
Voltage (V) = 0.8V
Current (I) = 200 mA = 200/10^3 = 2/10
Resistance = ?
Resistance = Voltage / Current
Voltage = Current × Resistance
0.8 = 2/10 × Resistance
0.8×10/2 = Resistance
8/2 = Resistance
Resistance = 4 ohm
_________________
Hope it helps...!!!
Explanation:
Which equation is true of an atom with no elctrical charge
A. Number of nutrons = number of protons
B. Number of electrons = number of neutrons
C. Number of neutrons = number of protons + number of electrons
D. Number of electrons = number of protons
Answer:
Atoms are composed of electrons (charge -1), protons (charge +1), and neutrons (no charge). So in a neutral atom the correct answer is "D".
name of impurities present in zinc plate used in simple cell.
Mercury is present in zinc plate which is used in simple cell
The _____is a measure of the number of waves that pass a point in a given amount of time
what is a material used to reduce or prevent the transfer of electricity, heat, or sound ?
Answer:
The material you're looking for is insulation.
Explanation:
It reduces and/or stops electricity waves, heat waves, and sound waves from going past.
Linus builds an electrical circuit with a battery and with wires that carry the current. As the battery weakens, the current also weakens. How does this affect the magnetic field around the wires
Answer:
When electric current weakens then the magnetic field around the wire also weaken
Explanation:
The magnetic field produced by electrical wire is directly proportional to the electricity flowing through it.
Thus, in case when electric current weakens then the magnetic field around the wire also weaken.
Answer:
The field gets weaker
Explanation:
took the quiz!
If an external force and the frictional force are acting on a body, which is in rest on the floor and are equal and opposite, then the frictional force is _____
If an external force and the frictional force are acting on a body, which is in rest on the floor and are equal and opposite, then the frictional force is Static friction.
A bicycle with a mass of 100kg hit a wall at an acceleration of 4 m/s2, what is the force?
Answer:
400N
Explanation:
F= ma
F= 100 x 4
F= 400N
A.149 kg baseball moving at 17.7 m/s is caught by a 57 kg catcher at rest on an ice skating rink, wearing
frictionless skates. With what speed does the catcher slide on the ice?
Do NOT put in units or it will be marked wrong! The answer's value only! Please round each answer to 3 places.
MaVa + MbVb = (Ma+b)(Va+b)
Answer:
v = 12.8 m/s
Explanation:
Applying the law of conservation of energy:
[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]
where,
m₁ = mass of baseball = 149 kg
m₂ = mass of catcher = 57 kg
u₁ = initial speed of ball = 17.7 m/s
u₂ = initial speed of catcher = 0 m/s
v₁ = v₂ = v = final speed of ball and the final speed of catcher = ?
both are same because ball is in hands of cathcer in the final state.
Therefore,
[tex](149\ kg)(17.7\ m/s)+(57\ kg)(0\ m/s)=(149\ kg)(v)+(57\ kg)(v)\\\\v = \frac{2637.3\ kgm/s}{206\ kg}[/tex]
v = 12.8 m/s
Which organs are involved in the process of delivering the digestive juices for the intestines?
Stomach
Esophagus
Gall Bladder
Liver
Pancreas
Answer:
The Liver, Pancreas and Gall Bladder are involved in the process of delivering the digestive juices for the Intestines
Explanation: