Carbon dioxide became trapped in Lake Nyos because the lake is a deep crater lake formed by a volcanic eruption. The magma beneath the lake releases carbon dioxide which dissolves in the water creating a high concentration of dissolved carbon dioxide.
Normally, the carbon dioxide would slowly bubble to the surface and dissipate into the atmosphere. However, in Lake Nyos, the carbon dioxide became trapped under a layer of cold, dense water, preventing it from escaping. Over time, more and more carbon dioxide built up, eventually reaching a critical point where it suddenly erupted from the lake, causing a catastrophic event known as a limnic eruption. This released a massive cloud of carbon dioxide which suffocated over 1,700 people and thousands of livestock in nearby villages. To prevent a similar disaster from happening again, scientists have implemented measures to regularly release the gas from the lake to prevent an excessive buildup of content loaded carbon dioxide.
Learn more about Carbon dioxide here
https://brainly.com/question/25385913
#SPJ11
the fetch of a moving storm system on the side of the storm where the wind is blowing in the direction as the storm is moving.multiple choiceboth decreases; opposite and increases; same are correctincreases; oppositeincreases; samedecreases; samedecreases; opposite
The fetch of a moving storm system on the side of the storm where the wind is blowing in the direction as the storm is moving opposite increases. The correct answer is option d.
The fetch refers to the distance over which wind can blow over water and generate waves. In a moving storm system, the fetch on the side of the storm where the wind is blowing in the opposite direction to the storm's movement will decrease because the storm is moving away from the area where the wind can generate waves.
Conversely, the fetch on the side of the storm where the wind is blowing in the same direction as the storm's movement will increase because the storm is pushing more water ahead of it and increasing the area over which wind can generate waves. Therefore, the correct answer is "Increases; opposite."
The correct answer is option d.
To know more about moving storm system refer to-
https://brainly.com/question/30436970
#SPJ11
Complete question
the fetch of a moving storm system on the side of the storm where the wind is blowing in the direction as the storm is moving. multiple choice
a. both decreases;
b. opposite and increases;
c. same are correct increases;
d. opposite increases;
e. same decreases;
f. same decreases;
g. opposite
earthquakes occur on convergent and transform plate boundaries, but do not occur on divergent plate boundaries. group of answer choices true or false
Answer:
False. Earthquakes do occur on divergent plate boundaries, as well as on convergent and transform plate boundaries.
Explanation:
This statement "earthquakes occur on convergent and transform plate boundaries, but do not occur on divergent plate boundaries" is false.
Earthquakes can and do occur at divergent plate boundaries, where two tectonic plates are moving away from each other. At these boundaries, the plates are still in motion and can cause stress and friction, which can lead to earthquakes.
However, the earthquakes that occur at divergent boundaries tend to be less intense than those at convergent and transform boundaries. The majority of earthquakes that occur on divergent boundaries are relatively small, shallow, and may not be felt by humans.
In contrast, convergent and transform plate boundaries often produce more powerful earthquakes.
At a convergent boundary, where two plates are moving towards each other, one plate may be forced beneath the other, creating a subduction zone and generating large earthquakes. At a transform boundary, where two plates are moving past each other horizontally, earthquakes can occur due to the friction and stress caused by the plates' motion.
To know more about earthquake refer to-
https://brainly.com/question/9415516
#SPJ11
What were the limitations of the 1963 Moscow Test Ban Treaty?
The 1963 Moscow Test Ban Treaty, also known as the Partial Nuclear Test Ban Treaty (PTBT), had several limitations. First, it prohibited nuclear weapon tests only in the atmosphere, outer space, and underwater, allowing for underground tests to continue.
This meant that countries could still develop and improve their nuclear weapons capabilities without violating the treaty. Second, the treaty lacked a robust verification mechanism. It relied on the voluntary cooperation of the signatories to monitor and report any violations. This made it difficult to ensure that all parties were abiding by the agreement, leaving room for potential clandestine testing. Third, some major nuclear powers, such as France and China, did not sign the treaty. This limited its effectiveness in curbing the global nuclear arms race, as non-signatories could continue their testing programs without restrictions. Lastly, the treaty did not address the issue of disarmament or the reduction of existing nuclear weapons stockpiles. Its focus was solely on limiting the testing of new weapons. Consequently, it did not contribute to a significant reduction in the number of nuclear weapons worldwide. In summary, the Moscow Test Ban Treaty faced limitations in its scope, verification mechanisms, participation of major nuclear powers, and its inability to address disarmament. Despite these shortcomings, the treaty was a crucial first step towards international efforts to regulate and control the development of nuclear weapons.
Learn more about Partial Nuclear Test Ban Treaty here
https://brainly.com/question/3477157
#SPJ11
before european settlement, prairies covered most of the middle third of what is now the united states. properly place the labels of the various prairies and savanna locations on the figure.
The prairies covered most of the middle third of what is now the United States, with different types of prairies and savannas found in various locations. Here are the labels for some of them:
1. Tallgrass prairie: located in the eastern part of the Great Plains region
2. Shortgrass prairie: located in the western part of the Great Plains region
3. Mixed-grass prairie: located in the central part of the Great Plains region
4. Oak savanna: found in the Midwest and Great Lakes region
5. Pine savanna: found in the Southeastern United States
For Further Information on savanna visit: https://brainly.com/question/3120704
#SPJ11
use a protractor to measure qrs also tel whether the angle is acute obtuse or right angle
To measure an angle using a protractor, one must follow these steps: Placing the protractor on the angle, with the base of the protractor aligned with one of the angle's sides and the center point of the protractor aligned with the vertex, the angle measurement from the protractor's scale is done.
An angle is formed when two rays or lines intersect at a common endpoint, known as the vertex. To measure an angle using a protractor, the protractor is placed on the angle with one of its sides aligned with one of the sides of the angle. The vertex of the angle should be located at the center of the protractor. The measurement of the angle is then read from the scale on the protractor. The measurement of the angle can be classified as acute, obtuse, or right, depending on its degree.
Learn more about the angles here.
https://brainly.com/question/17994692
#SPJ1
Which of the following is NOT a common site for deposition of sediment?
levee
cutbank
distributary system
floodplain
point bar
The feature that is NOT a common site for deposition of sediment is the cutbank. Levee, distributary system, floodplain, and point bar are all common sites for sediment deposition.
A cutbank is a feature found on the outer edge of a meandering river where the water flow is fastest and the erosion of the bank is occurring. The sediment is being carried away from the cutbank and deposited downstream, making it an erosional site rather than a depositional one. Levees, distributary systems, floodplains, and point bars are all common sites for deposition of sediment. Levees are ridges of sediment that form along the banks of a river during a flood event. Distributary systems are branching networks of smaller channels that distribute sediment into different areas. Floodplains are flat areas of land next to a river that are regularly flooded and covered with sediment. Point bars are formed on the inner edge of a meandering river where the flow is slower and sediment is deposited.
In contrast, a cutbank is a site of erosion rather than deposition. It is found on the outer bend of a river where the flow is faster, leading to the erosion of the bank and the removal of sediment.
To know more about Cutbank visit:
https://brainly.com/question/30663347
#SPJ11
Indicate which country is most threatened by the problems listed below.Choose C for Canada.Choose G for Greenland.Choose M for Mexico.Choose U for the United States.aging population GUCMlow standard of living GMUCoverfishing UMGCconflict between English and French speakers GUCM
Based on the problems listed below, the country most threatened would be:
Aging population: GUCM (Greenland, United States, Canada, Mexico) - all of these countries are experiencing an increase in the proportion of older adults in their population. However, Japan and several European countries face even more significant challenges in this regard.Low standard of living: GMUC (Greenland, Mexico, United States, Canada) - these countries all have areas where poverty and inequality are prevalent. However, the degree of inequality varies widely within each of these countries, with some regions having much higher living standards than others.Overfishing: UMGC (United States, Mexico, Greenland, Canada) - all of these countries have significant fisheries and face challenges with overfishing and sustainable management of their marine resources. However, the specific issues and management approaches vary by country and region.Conflict between English and French speakers: GUCM (Greenland, United States, Canada, Mexico) - while each of these countries has its own unique linguistic and cultural dynamics, Canada stands out as having a longstanding and ongoing challenge with tensions between English and French speakers, particularly in the province of Quebec.Overall, it is important to recognize that these challenges affect multiple countries to varying degrees, and that each country faces its own unique set of opportunities and obstacles in addressing them.
To know more about united states refer to-
https://brainly.com/question/1527526
#SPJ11
It was long thought that ________ was the solution to water pollution, something we now know is not accurate, especially for hydrophobic chemicals
Select one:
a. Natural attenuation
b. Channelization
c. Eutrophication
d. Dilution
It was long thought that Dilution was the solution to water pollution, something we now know is not accurate, especially for hydrophobic chemicals. Option D is correct.
Dilution was long thought to be the solution to water pollution because it was believed that by simply adding more water to a polluted body of water, the concentration of pollutants would decrease to safe levels. However, we now know that this is not always the case, especially for hydrophobic chemicals that do not dissolve easily in water. Instead, these chemicals tend to accumulate in sediment and in the fatty tissues of aquatic organisms, where they can cause harm to the ecosystem and pose a risk to human health if consumed. Therefore, it is important to use other methods, such as treatment and prevention, to reduce and eliminate water pollution.
In addition to dilution being an inadequate solution to water pollution, it can also have unintended negative consequences on the ecosystem. Adding large amounts of water to a polluted body of water can alter the natural balance of the ecosystem, leading to changes in water temperature, dissolved oxygen levels, and nutrient availability. This can have a negative impact on the survival of aquatic organisms, particularly those that are adapted to a specific set of environmental conditions.
Learn more about Dilution here:
https://brainly.com/question/28997625
#SPJ11
What type of volcanic structure is Shiprock, New Mexico, and how did it form?
Shiprock, New Mexico is an example of a volcanic neck, also known as a volcanic plug. A volcanic neck is a column of solidified magma that forms when magma is forced into a vertical conduit and then solidifies underground.
The surface of the solidified magma neck is revealed as the surrounding rock erodes away over time.
When compared to its surroundings, Shiprock, a volcanic neck that rises approximately 1,800 feet above the ground, is particularly stunning. It is made of volcanic breccia, a type of rock created by violent eruptions that break lava into tiny pieces.
It is thought that the lava that gave rise to Shiprock was created in the area some 30 million years ago, during the height of a period of active volcanic activity.
For such more question on volcanic:
https://brainly.com/question/1156480
#SPJ11
How does the composition and viscosity of lava flows differ between composite volcanoes and shield volcanoes?
The composition and viscosity of lava flows differ between composite volcanoes and shield volcanoes due to their distinct magma types. Composite volcanoes, also known as stratovolcanoes, have a high viscosity, felsic lava composition, which is rich in silica and results in explosive eruptions. In contrast, shield volcanoes produce low viscosity, mafic lava flows that are low in silica, allowing the lava to spread over larger areas and create a broad, gently sloping shield-like shape.
The composition and viscosity of lava flows can differ between composite volcanoes and shield volcanoes due to differences in the types of magma that are present in each volcano. Composite volcanoes, also known as stratovolcanoes, are characterized by more viscous magma that is high in silica content. This type of magma tends to be thicker and stickier, which can lead to explosive eruptions and the formation of steep-sided cones. In contrast, shield volcanoes are characterized by less viscous magma that is low in silica content. This type of magma is more fluid and can flow more easily, leading to the formation of wide, gentle slopes. The lava flows from shield volcanoes are generally longer and less explosive than those from composite volcanoes. Overall, the composition and viscosity of lava flows can vary greatly between different types of volcanoes, and can be influenced by a range of factors including the temperature and pressure of the magma, the amount of gas trapped within it, and the geologic setting in which the volcano is located.
Learn More about viscosity here :-
https://brainly.com/question/30577668
#SPJ11
A phaneritic texture is a characteristic of a____ igneous Rick that cooled _____
A phaneritic texture is a characteristic of a intrusive igneous rock that cooled slowly beneath the Earth's surface. The term "phaneritic" refers to the visible mineral grains that make up the rock, which are typically coarse-grained and can be seen with the eye.
This texture is a result of the slow cooling process, which allows for the minerals to grow and crystallize over a longer period of time.
In contrast, extrusive igneous rocks cool quickly on or near the Earth's surface and have a fine-grained texture. This is because the minerals do not have as much time to grow and crystallize before the rock solidifies. Overall, the texture of an igneous rock can provide important information about its formation and history, and the presence of a phaneritic texture suggests that the rock formed deep within the Earth's crust.
Learn more about phaneritic here:
https://brainly.com/question/12348142
#SPJ11
Most ocean ridges coincide with ________.
A) divergent plate boundaries
B) convergent plate boundaries
C) oceanic plates
D) transforming boundaries
E) continental plates
Most ocean ridges coincide with option A) divergent plate boundaries.
These are areas where tectonic plates are moving apart from each other, allowing magma to rise up from the mantle and solidify to form new crust. As this process continues, the newly formed crust spreads outward, pushing the older crust aside and creating a ridge. This process is known as seafloor spreading and is responsible for the formation of new oceanic crust. Ocean ridges are also associated with volcanic activity and hydrothermal vents, where hot water and minerals are released from the Earth's interior. Understanding the dynamics of ocean ridges and plate boundaries is important for understanding the Earth's geology, as well as for predicting and mitigating the effects of natural hazards such as earthquakes and tsunamis.
To learn more about ocean ridges, visit:
https://brainly.com/question/30399464
#SPJ11
this argument may contain which of the following fallacies: global warming is not caused by human activity - and the latest polls show the majority of americans agree. True/False
The fallacy present in this argument is the "argumentum ad populum" or the appeal to popular opinion fallacy. Therefore, the answer is "True".
The argument contains the fallacy of "appeal to popularity" or "argumentum ad populum", which is the idea that something is true or right because a lot of people believe it or agree with it. Just because a majority of people believe something to be true, it does not necessarily mean that it is true or supported by evidence. In this case, the claim that global warming is not caused by human activity needs to be evaluated based on scientific evidence and research, rather than relying on popular opinion.
Learn more about evidence here:https://brainly.com/question/15880833
#SPJ11
Which term, associated with Etruscan art and architecture, describes a coffin made of stone that is typically adorned with sculpture? A.) Sarcophagus
B.) Podium
C.) Archaic smile
D.) Ridgepole
The term associated with Etruscan art and architecture that describes a coffin made of stone that is typically adorned with sculpture is A) Sarcophagus.
A sarcophagus is a type of coffin that is made of stone and decorated with sculpture. The word "sarcophagus" comes from the Greek words "sarx" meaning "flesh" and "phagein" meaning "to eat", reflecting the idea that the coffin consumed the body placed inside.
In Etruscan art and architecture, sarcophagi were often elaborate and highly decorated, with intricate relief sculptures depicting scenes from mythology or the life of the deceased. They were typically made of terracotta or stone, and sometimes featured a portrait of the deceased on the lid.
Etruscan sarcophagi were also sometimes used for multiple burials, with compartments inside the coffin for multiple bodies. The practice of using sarcophagi continued into the Roman era, and many examples of Roman sarcophagi can be found throughout Italy and other parts of the Roman Empire.
Learn more about Sarcophagus here:
https://brainly.com/question/31605503
#SPJ11
Petrified wood is an example of what type of fossil preservation?
A)Permineralization
B) Mold
C)Cast
D) Impression
E)Burrow
Your answer: A) Permineralization. Petrified wood is an example of permineralization, a type of fossil preservation. In this process, minerals from the surrounding environment fill in the pores and spaces within the wood, gradually replacing the organic material and preserving its original structure. This creates a fossilized, stone-like replica of the original wood.
The answer is A) Permineralization. Petrified wood is formed through the process of permineralization where the organic material of the wood is replaced by minerals over time. This results in a fossilized replica of the original wood. Mold and cast preservation involve the creation of a negative and positive impression respectively, while impression preservation involves the direct impression of the organism onto a surface. Burrow preservation is when a trace fossil of an animal's burrow is left behind.
Learn more about Burrow preservation here: brainly.com/question/23172786
#SPJ11
Based on what you learned in this video what minerals make up Rhyolite?
In the video, it is explained that Rhyolite is a volcanic rock that is formed from the cooling and solidification of magma or lava. The minerals that make up Rhyolite are quartz, feldspar, and biotite.
Quartz is a mineral that is commonly found in igneous rocks and is composed of silicon and oxygen. Feldspar is another mineral commonly found in igneous rocks and is made up of aluminum, silica, and potassium or sodium. Biotite is a dark-colored mineral that is a member of the mica group and is made up of iron, magnesium, aluminum, silica, and oxygen. Rhyolite is a fine-grained rock that has a high silica content, which gives it a light color and a glassy texture. It is commonly found in volcanic regions and is often associated with explosive volcanic activity. Rhyolite is used in construction and as a decorative stone because of its attractive colors and textures. It is also used in the production of ceramics, glass, and other industrial materials. Overall, the minerals that make up Rhyolite play an important role in its physical properties and its uses.
Learn more about Rhyolite here
https://brainly.com/question/14333029
#SPJ11
Partial melting of rock in subduction zones is aided by the addition of ______, which is (are) released by sediments on top of the subducting plate.
a. Water
b. Air
c. Sand
d. none
Partial melting of rock in subduction zones is aided by the addition of water, which is (are) released by sediments on top of the subducting plate
However, this partial melting is aided by the addition of water, which is released by sediments on top of the subducting plate. Water is a volatile substance that lowers the melting temperature of rocks, allowing them to partially melt even at lower temperatures. The water is released from the sediments on top of the subducting plate as it gets squeezed and heated during the subduction process. The water then migrates into the overlying mantle wedge, where it interacts with the mantle rocks and triggers partial melting. This partial melting generates magma, which rises to the surface and forms volcanoes. Therefore, the addition of water is crucial for the formation of volcanic arcs in subduction zones. The other options, air and sand, do not have the same effect as water in aiding the partial melting of rock in subduction zones.
Know more about Subduction zones here:
https://brainly.com/question/13788626
#SPJ11
a welded igneous texture indicates that:
a. there was a lot of gas in the magma
b. the rock cooled quickly
c. the rock broke apart as it flowed
d. the rock cooled slowly
e. the ash and pumice were hot and became compacted
The correct answer is d. The rock cooled slowly. A welded igneous texture indicates that the rock cooled slowly. This texture is formed when hot magma, rich in gas, cools and solidifies gradually over time.
As the magma cools, it solidifies into a cohesive mass, and the gases escape, leaving behind a dense, welded texture. This process can take weeks, months, or even years, depending on the size and composition of the magma body. The slow cooling allows for the mineral crystals to grow and interlock with each other, creating a strong, durable rock. The resulting rock is typically fine-grained, with no visible crystals or pores. So, option d. the rock cooled slowly, is the correct answer to your question.
To know more about hot magma.
https://brainly.com/question/24384827
#SPJ11
What factors have influenced the information of the countries of the transition zone
Answer:IT ISSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
Explanation:
while i was reading i saw that it said that it is hold up
__________ is when various geologic materials exposed to the same environmental conditions will weather differently depending on their composition.
A) Hydrolysis
B) Chemical weathering
C) Differential weathering
D) Oxidation
E) Physical weathering
Differential weathering is when various geologic materials exposed to the same environmental conditions will weather differently depending on their composition. Therefore the correct option is option C.
Differential weathering is a process in which various geologic materials exposed to the same environmental conditions will weather differently depending on their composition.
This can result in the formation of unusual and distinctive landforms, such as the hoodoos in Bryce Canyon National Park, where harder and more resistant rock layers stand above softer, more easily weathered layers.
The differential weathering occurs because different rocks have different physical and chemical properties that affect how they respond to environmental forces such as wind, water, and temperature changes.Therefore the correct option is option C.
For such more question on environmental:
https://brainly.com/question/23946590
#SPJ11
The geologic structure in which deformed rock layers on both sides of an axis dip towards each other is known as:
A. monocline
B. syncline
C. anticline
D. thrust fault
The geologic structure in which deformed rock layers on both sides of an axis dip towards each other is known as a syncline.
Geologic structures are features in the Earth's crust that result from various geologic forces, such as tectonic plate movement and volcanic activity.
A monocline is a type of fold in which rock layers are folded or tilted so that they slope downward in one direction. This creates a step-like structure in the rock layers.
A syncline is a type of fold in which rock layers are folded or tilted so that they slope downward in the middle, creating a trough-like structure.
An anticline is a type of fold in which rock layers are folded or tilted so that they slope upward in the middle, creating an arch-like structure.
A thrust fault is a type of fault in which rock layers are pushed up and over other rock layers along a fault line, often resulting in a steeply inclined fault plane.
learn more about monocline here:https://brainly.com/question/14093076
#SPJ11
Which one of the following statements is TRUE?a. Sediment flow increases in the warm water flowing out of a hydropower reservoir.b. Variations in water released from hydropower facilities generally matches the natural flow in the affected rivers.c. Hydropower accounts for more than half of all renewable energy use.d. The construction and use of dams for hydropower produces no greenhouse gases.
Option c. "Hydropower accounts for more than half of all renewable energy use" is true.
Hydropower is a renewable energy source that harnesses the power of flowing water to generate electricity. It is one of the oldest and most widely used forms of renewable energy, and accounts for more than half of all renewable energy use globally.
Hydropower facilities use the natural flow of rivers and streams to turn turbines and generate electricity, with no direct emissions of greenhouse gases. However, the construction and use of dams can have environmental impacts, including habitat destruction, altered river flows, and changes in water temperature and quality.
In addition, variations in water released from hydropower facilities may not always match the natural flow in the affected rivers, which can have negative impacts on aquatic ecosystems and downstream communities.
The correct answer is option c.
To know more about hydropower refer to-
https://brainly.com/question/22258411
#SPJ11
hot spots in continental setting typically produce?
a. high continental plateaus, such as Tibet
b. lines or clusters of islands
c. basaltic lava flows or explosive calderas
d. new oceanic crust
Hot spots in continental settings typically produce basaltic lava flows or explosive calderas. Unlike hot spots in oceanic settings, which tend to produce linear chains of volcanic islands or seamounts.
these hot spots in continental settings tend to form large volcanic features, such as basaltic lava flows or explosive calderas. These features can be associated with high levels of volcanic activity and may occur in areas of continental rifting or other tectonic activity. The type of volcanic activity produced by a hot spot in a continental setting can vary depending on a number of factors, including the composition of the magma, the presence of water or other volatile substances, and the type of tectonic activity in the region. In some cases, hot spots in continental settings may produce large shield volcanoes, which are broad, gently sloping structures built up over time by successive eruptions of fluid lava. In other cases, the hot spot may produce more explosive eruptions, such as calderas or pyroclastic flows. Overall, the volcanic activity associated with hot spots in continental settings can be highly variable, but tends to be more explosive and produce larger-scale volcanic features than hot spots in oceanic settings.
Learn more about volcanic islands here:
https://brainly.com/question/30711133
#SPJ11
Which of the following statements best explains the connection between the social status of women and a country's
overall health?
A. Women who enjoy a higher social status are usually less educated than women of a lower social
status.
B. Women who enjoy a higher social status are usually more educated than women of a lower
social status.
C. Women who enjoy a higher social status are likely to have far more children than women of a
lower social status.
D. Women who enjoy a higher social status are less likely to have healthcare resources than
women of a lower social status.
Please select the best answer from the choices provided.
A
B
OC
OD
Mark this and return
Save and Exit
Next
Submit
Answer: B. Women who enjoy a higher social status are usually more educated than women of a lower social status.
Explanation:
Which are the last seismic waves to arrive at a seismic station?
A) S-waves
B) Body waves
C) Compressional waves
D) Surface waves
E) P-waves
The last seismic waves to arrive at a seismic station are Surface waves. Seismic waves are the vibrations generated by earthquakes and recorded by seismic stations.
There are two main categories of seismic waves: body waves and surface waves. Body waves consist of P-waves (compressional waves) and S-waves, both of which travel through the Earth's interior. Surface waves, on the other hand, travel along the Earth's surface and generally cause more damage due to their larger amplitudes and longer durations.
P-waves, being compressional waves, are the fastest of the three types and arrive first at a seismic station. They compress and expand the ground in the direction of their propagation. S-waves arrive next, being slower than P-waves, and cause the ground to move perpendicular to their direction of travel.
Surface waves arrive last because they travel at a slower speed than body waves. They can be further divided into two types: Rayleigh waves and Love waves. Rayleigh waves cause the ground to move in an elliptical motion, while Love waves create horizontal ground movement. The combination of these two surface wave types can lead to significant damage during earthquakes.
Learn more about seismic waves here:
https://brainly.com/question/13056218
#SPJ11
Other than sand dunes in a desert environment, where else would you expect to find well-rounded and sorted sand deposits?
A) delta
B)beach
C)lake
D)glacier
E)reef
Other than sand dunes in a desert environment, you would expect to find well-rounded and sorted sand deposits in environments where there is water movement and erosion.
A) Delta: Deltas are formed at the mouth of rivers where they meet an ocean, lake, or other body of water. The river deposits sediment, including sand, as it slows down in the body of water. The sand may be well-rounded and sorted due to the water movement and erosion that occurs in the delta environment.
B) Beach: Beaches are formed from the accumulation of sediment, including sand, that is transported by waves and currents along the shoreline. The sand may be well-rounded and sorted due to the water movement and erosion that occurs in the beach environment.
C) Lake: Lakes can have sand deposits that are well-rounded and sorted, especially in areas where there is wave action and currents. The sand may be transported to the lake from nearby rivers or streams or may be formed from the erosion of the lake shore.
D) Glacier: Sand deposits associated with glaciers may not be well-rounded, as the glaciers can transport a variety of sediment sizes and shapes. However, some sand deposits associated with glaciers may be sorted due to the water movement and erosion that occurs as the glacier melts.
E) Reef: Sand deposits may be found in coral reef environments, where waves and currents transport sediment onto the reef. The sand may be well-rounded and sorted due to the water movement and erosion that occurs in the reef environment.
Learn more about erosion: https://brainly.com/question/3852201
#SPJ11
What is the most common indirect effect that volcanic activity can have on humans?
Volcanic activity can have a variety of indirect effects on humans, ranging from economic impacts to environmental changes. However, one of the most common indirect effects that volcanic activity can have on humans is the disruption of air travel.
When a volcanic eruption occurs, it can release large amounts of ash and other particles into the atmosphere. These particles can pose a significant threat to airplanes, as they can damage engines and other critical components. As a result, air travel in the vicinity of the eruption can be severely impacted, with flights being delayed, cancelled, or rerouted to avoid the affected area.This disruption of air travel can have significant economic consequences, as airlines may lose revenue and travelers may be stranded or forced to find alternative modes of transportation. Additionally, the disruption can have wider-reaching effects, as it can impact industries that rely on air transportation, such as tourism and global trade.While disruptions to air travel are the most common indirect effect of volcanic activity on humans, it is important to note that the impacts can vary widely depending on the specific characteristics of the eruption and the surrounding environment. As such, it is critical for scientists and policymakers to closely monitor volcanic activity and develop strategies to mitigate its potential impacts on human populations.
Learn more about humans here
https://brainly.com/question/24067944
#SPJ11
A worm burrow is an example of which type of fossilization?
A worm burrow is an example of trace fossilization. Trace fossils are the remains of biological activity, such as burrows, footprints, and coprolites (fossilized feces), rather than the preserved remains of an organism's body.
Trace fossils provide important information about the behavior and ecology of ancient organisms, as well as the conditions of their environment. In the case of a worm burrow, the fossilized remains of the burrow show that a worm or other burrowing organism was present in the sediment at some point in the past. This can provide clues about the sedimentary environment and the type of organisms that were living there, as well as how they interacted with their environment. Trace fossils, such as worm burrows, provide important information about the behavior and ecology of ancient organisms. Trace fossils can include impressions, tracks, trails, burrows, borings, and other evidence of the activities of living organisms.
Trace fossils are different from body fossils, which preserve the actual remains of an organism's body, such as bones, shells, and teeth. Trace fossils provide evidence of the behavior of ancient organisms, such as how they moved, what they ate, and how they interacted with their environment.
Learn more about ecology here:
https://brainly.com/question/30429252
#SPJ11
The deadly gas that killed 1,700 people and 3,000 livestock near Lake Nyos, Cameroon, in 1986 was later identified as ______.
Answer:
Carbon Dioxide
Explanation:
Trust me its correct but for those who are hesitant
---> In 1986, possibly as the result of a landslide, Lake Nyos suddenly emitted a large cloud of CO2(Which is Carbon Dioxide), which suffocated 1,746 people and 3,500 livestock in nearby towns and villages, the most notable one being Chah, which was abandoned after the incident.
NEED HELP NOW!!!!! 15 POINTS!!!!!
Read this excerpt about Qin Shi Huang, the founder of the Qin dynasty. Then answer the question that follows.
The Qin dynasty lasted for a brief period of 15 years. Emperor Qin founded the empire by unifying all warring states. Qin ruled with absolute control. He also added greatly to China’s progress. He started the construction on the Great Wall of China and the Grand Canal. He also had other roads built to boost China’s trade.
Which of the following can be concluded about Emperor Qin Shi Huang’s governing methods?
Select all the correct answers.
His rule lasted for only a short time because he became ill and died.
He built the Great Wall to set an example for other governments.
His rule ended after only 15 years because his army revolted against him.
He used Legalism to unify the empire of China.
He believed that economic progress is the true mark of a successful empire.
Answer:He believed that economic progress is the mark of a successful empire.
Explanation: