Answer:
177.3kg C₂₁H₄₄
Explanation:
Based on the chemical reaction:
C₂₁H₄₄ → 3C₂H₄ + C₁₅H₃₂
Where 1 mole of C₂₁H₄₄ produce 3 moles of ethene, C₂H₄.
To solve this question we need to determine the moles of ethene in 50.4kg. 1/3 these moles are the moles of C₂₁H₄₄ that must be added:
Moles Ethene -Molar mass: 28.05g/mol-
50.4kg = 50400g * (1mol / 28.05g) = 1796.8 moles of ethene
Moles C₂₁H₄₄:
1796.8 moles of ethene * (1 mol C₂₁H₄₄ / 3 mol C₂H₄) = 589.93 moles C₂₁H₄₄
Mass C₂₁H₄₄:
589.93 moles C₂₁H₄₄ * (296g / mol) = 177283g =
177.3kg C₂₁H₄₄science help me please :))
Answer:
There will be 2 nitrogen and 2 oxygen atoms in the product.
Explanation:
In a chemical reaction, atoms are neither created or destroyed, which means if there are 2 nitrogen atoms in the reactants, there will be 2 nitrogen atoms in the products. Similarly, if there are 2 oxygen atoms in the reactants, there will be 2 oxygen atoms in the products.
Let me know if this helps!
QUICKKKKKK I WILL GIVE BRAINLIEST
When a small volume of water is boiled, a large volume of steam is produced. Why?
Water molecules repel each other when heated.
Water molecules repel each other when heated.
The size of the water molecules increases when heated.
The size of the water molecules increases when heated.
The molecules are further apart in steam than in water.
The molecules are further apart in steam than in water.
The change from water to steam causes the number of molecules to increase.
Answer:
C
Explanation:
The molecules are farther apart in steam than in water.
Which of the following is an example of a situation in which an egg is receiving thermal energy through convection?
A. The egg is kept warm by its mother in the nest
B. An egg cracked on a hot sidewalk starts to cook
C. The egg is hard boiled in a pot of water
D. A metal pan on the stove fries the egg
What is the molarity of a solution in which 0.321 g of calcium chloride is dissolved in 1.45 L water?
Answer:
Molarity = 0.002 M
Explanation:
Given data:
Mass of calcium chloride = 0.321 g
Volume of water = 1.45 L
Molarity of solution = ?
Solution:
Molarity = number of moles / volume in litter.
We will calculate the number of moles of calcium chloride first.
Number of moles = mass/molar mass
Number of moles = 0.321 g/ 110.98 g/mol
Number of moles = 0.003 mol
Molarity:
Molarity = 0.003 mol / 1.45 L
Molarity = 0.002 M
Which is a characteristic of all ions?
They are metals.
They have a charge.
They are made of two or more types of atoms.
They form chemical bonds through electron sharing.
Answer:
D. They form chemical bonds through electron sharing.
Explanation:
The correct characteristic of all ions is that they have a charge. Therefore option B is correct.
An ion is an atom or a molecule that has gained or lost electrons, resulting in an unequal number of protons and electrons. This imbalance of positive and negative charges gives the ion a net electrical charge.
Ions can have a positive charge (called cations) if they have lost electrons, or a negative charge (called anions) if they have gained electrons.
The charge of an ion is essential in determining its behavior and interactions with other ions and molecules. It influences the way ions form chemical bonds and participates in chemical reactions.
The charge of an ion is indicated by a superscript after the chemical symbol, such as Na+ for a sodium cation or Cl- for a chloride anion.
Know more about electrical charge:
https://brainly.com/question/28457915
#SPJ2
How many moles are equal to 89.23g of aluminum chloride, AlCl3?
Answer:
[tex]\boxed {\boxed {\sf 0.6692 \ mol \ AlCl_3}}[/tex]
Explanation:
To convert from grams to moles, we must use the molar mass. This can be calculated using the Periodic Table.
1. Molar Mass
First, identify the elements in the compound AlCl₃. They are aluminum and chlorine. Now find the masses:
Al: 26.981538 g/mol Cl: 35.45 g/molTake a look at the compound. There is a subscript of 3 after chlorine, so we must multiply its molar mass by 3 then add aluminum's.
AlCl₃= 3(35.34 g/mol) + 26.981538 g/mol = 133.331538 g/mol2. Convert Grams to Moles
We can use the molar mass as a ratio.
[tex]\frac{133.331538 \ g \ AlCl_3}{1 \ mol \ AlCl_3}[/tex]
Multiply by the given number of grams: 89.23
[tex]89.23 \ g \ AlCl_3 * \frac{133.331538 \ g \ AlCl_3}{1 \ mol \ AlCl_3}[/tex]
Flip the fraction so the grams of aluminum chloride cancel out.
[tex]89.23 \ g \ AlCl_3 * \frac{1 \ mol \ AlCl_3}{133.331538 \ g \ AlCl_3} = 89.23 \ * \frac{1 \ mol \ AlCl_3}{133.331538}[/tex]
[tex]\frac{89.23 \ mol \ AlCl_3}{133.331538}[/tex]
[tex]0.6692340112 \ mol \ AlCl_3[/tex]
3. Round
The original measurement of grams has 4 significant figures. We must round to 4 sig figs.
For the number we calculated, that is the ten thousandth place.
The 3 in the hundred thousandth place tells us to leave the 2.
[tex]0.6692 \ mol \ AlCl_3[/tex]
There are about 0.6692 moles of aluminum chloride in 89.23 grams.
2AlF3 + 3K2O → 6KF + Al2O3
How many grams of AlF3would it take to make 15.524 g of KF?
?g AlF3 (use 5 sig figs)
7.4797 g AlF₃
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Stoichiometry
Reading a Periodic TableUsing Dimensional AnalysisExplanation:Step 1: Define
[RxN] 2AlF₃ + 3K₂O → 6KF + Al₂O₃
[Given] 15.524 g KF
Step 2: Identify Conversions
[RxN] 6 mol KF = 2 mol AlF₃
Molar Mass of K - 39.10 g/mol
Molar Mass of F - 19.00 g/mol
Molar Mass of Al - 26.98 g/mol
Molar Mass of KF - 39.10 + 19.00 = 58.1 g/mol
Molar Mass of AlF₃ - 26.98 + 3(19.00) = 83.98 g/mol
Step 3: Stoichiometry
Set up: [tex]\displaystyle 15.524 \ g \ KF(\frac{1 \ mol \ KF}{58.1 \ g \ KF})(\frac{2 \ mol \ AlF_3}{6 \ mol \ KF})(\frac{83.98 \ g \ AlF_3}{1 \ mol \ AlF_3})[/tex]Multiply/Divide: [tex]\displaystyle 7.47966 \ g \ AlF_3[/tex]Step 4: Check
Follow sig fig rules and round. We are given 5 sig figs.
7.47966 g AlF₃ ≈ 7.4797 g AlF₃
what is the correct answer ??
Answer:
Quantum mechanical which is described by the Greek letter phi that describes how energy is transmitted as electrons change or jump from one shell to the nextI thought heavy elements like iron & gold were dense & sank into the interior of the molten planet? How did gold get on top of the less dense crust?
Answer:
If it is denser then water it shall float but if water has a higher density the object sinks
Explanation:
HELPPPPP PLEASSEEEEE
Which statement is TRUE comparing the research of Bohr, Rutherford, and Dalton?
Dalton and Bohr modeled their experiments and their theories after Rutherford.
Dalton and Rutherford modeled their experiments and their theories after Bohr.
All three scientists developed their theories at the same time.
Rutherford and Bohr modeled their experiments and their theories after Dalton.
HELPPPPPPPPPP PLEASEEEEEEEE
Answer:
Dalton was first with the modeling They soon followed so the answer is D: rutherford and bohr modeled their experimentsThe watt is the standard unit of measurement for?
Answer:
electrical power. nnnnnnn
Which orbital notation represents the second principal energy level of a silicon atom in the ground state?
Answer:
2
Explanation:
Silicon is one the elements found in nature and well positioned the periodic table.
It has an atomic number of 14 with an electronic configuration:
1s² 2s² 2p⁶ 3s² 3p⁴
From this formula the orbital notation that represents the second principal energy level is 2.
The main energy level in which the orbital is located or the average distance of the orbital from the nucleus is the principal quantum number.
It takes the number 1,2,3,4,5 e.t.c
Chemistry. Question is on photo. Will mark Brainy for whoever gets this right.
Answer:
49.18 eV hope this helps
The student carried out three titrations. The results are shown below (pic)
Use the student's concordant results (those within 0.10 cm of each other)
to work out the mean volume of sulfuric acid added.
Answer:
yes
Explanation:
How many products are produced in the following equation.
C2H2N2O4 + O2 → 4 CO2 + 2 H2O + 2 N2
Answer:
There are three products;carbon(IV)oxide,water and dinitogen and the number of molecules are given
I'm hot right? here's a pic of me
b. How many grams of CO2 are produced from 36
grams of CH4?
Answer:
Ch4 G +2o2 g co2 G +2h2o g How many moles of methane are required to produce 22 g co2 G after combustion
Explanation:
it's 22 grams..
hope the answer was helpful ....
i swear if someone helps me with this I’ll give them the biggest hug lol
Answer:
C
Explanation:
Bc Look at it like this if norm and grav are equal aka the reason why hes not going threw the cement or flying in the air then the app and the fric are equal too or he would slip and fall
What is the molar mass of chlorine gas? (Hint: Be careful... the gas exists as Cl2)
Select one:
a. none of the above
b. 35.5 g
c. 71.0 g
d. 17.125 g
the calculation was like 70.90 so would it be none of the above??
A cart with the weight was already moving lefgt with a constant speed when the two forces shown were applied to the car. How do the two forces affect the motion of the cart?
Explanation:
the cart will be slowed down because the weight was added to the right the cart won't stop for about 10 seconds. there will be a lot of pull and friction therefore the cart slows down drastically
Help me balance the equation
Answer:
blank 1 ----> 1
blank 2 -----> 1
blank 3 ------> 3
Explanation:
easy one!
Organisms can be classified as
and
Answer:
Eukaryotes and prokaryotes
Explanation:
Summary If you were a conservation scientist, what would you like most about your job?
Explanation:
A conservationist is someone who advocates and champions the cause to protect the environment and use earth's resource in a sustainable way.
One of the interesting perks of being a conservationist is the ability to preserve pristine nature.
This aspect would most fascinate me. The joy of having to enact laws and policies that would preserve very vital aspect of the ecosystem would such a great delight. Also, having to champion the cause of indigenous people in whose voices are not often disseminated is a good catchThe process by which a cell takes in a large particle is called
A
endocytosis.
B
diffusion.
C
active transport.
D
exocytosis.
Answer:
A endocytosis
Explanation:
The process by which a cell takes in a large particle is called endocytosis. Therefore, the correct option is option A.
What is endocytosis?Endocytosis is the procedure by which molecules are actively transported into the cell by being engulfed by its membrane. All cells use endocytosis and exocytosis to transport substances that cannot passively cross the membrane. Exocytosis serves the opposite purpose by ejecting molecules from the cell.
The requirement for homeostasis ensures an equal flow all molecules into and out of a cell, like all of the body's systems. This indicates that the number of molecules exocytosis and endocytosis both equal the number of molecules into the cell. The two systems work together to maintain a balance between nutrients and waste that is necessary for normal cell growth and function. The process by which a cell takes in a large particle is called endocytosis.
Therefore, the correct option is option A.
To know more about endocytosis, here:
https://brainly.com/question/185008
#SPJ3
what does inductive effect mean?
Answer:
Tbh I looked it up but here is what I found. I hope it helps
Explanation:
In chemistry, the inductive effect is an effect regarding the transmission of unequal sharing of the bonding electron through a chain of atoms in a molecule, leading to a permanent dipole in a bond.
PLZ helppp meeeeee plllzzzzzzzzzzzzzzzzz &thhxx
Answer:
Option C: Combustion and synthesis only
Explanation:
This reaction is referred to as combustion reaction because carbon is burnt in oxygen to produce carbon (IV) oxide.
Also, it's a synthesis reaction because the two different atoms which are Carbon and oxygen interact to form a different compound which is CO2.
Thus, the correct answer is Option C: combustion and synthesis only
How can you increase an object's kinetic energy?
The table shows index fossils.
A 4 row table. Row 1, CENOZOIC ERA. It is split into Quaternary Period, Pecten gibbus, and Tertiary Period, Calyptraphorus velatus. Row 2, MESOZOIC ERA. It is divided into Cretaceous Period, Scaphites hippocrepis, Jurassic Period, Perisphinctes tiziani, and Triassic Period, Trophites subbullatus. Row 3, PALEOZOIC ERA. It is divided into Permian Period, Leptodus americanus, Pennsylvanian Period, Dictyoclostus americanus, Mississippian Period, Cactocrinus multibrachiatus, Devonian Period, Mucrospirifer mucronatus, Silurian Period, Cystiphyllum niagarense, Ordovician Period, Bathyurus extans, and Cambrian Period, Paradoxides pinus. Row 4, PRECAMBRIAN, has no additional information.
Which conclusion about Paradoxides pinus is supported by the information in the table?
Life forms existed during the Cambrian period.
Similar fossil species formed after the Devonian period.
This fossil species first appeared during the Cenozoic era.
Different life forms were surviving during Precambrian time.
Answer:
A. life forms existed during the Cambrian period
Explanation:
Answer:
A
Explanation:
Have a nice day!
A balloon is inflated to a volume of 1.25L .If the temperature of the air inside is cooled from 35°C to 15°C , what will be the final volume of the balloon?
Answer:
V₂ = 1.17 L
Explanation:
Given data:
Initial volume of balloon = 1.25 L
Initial temperature = 35°C
Final temperature = 15°C
Final volume = ?
Solution:
Initial temperature = 35°C (35+273.15K = 308.15 K)
Final temperature = 15°C (15+273.15 K = 288.15 K)
The given problem will be solve through the Charles Law.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
V₂ = V₁T₂/T₁
V₂ = 1.25 L × 288.15 K / 308.15 k
V₂ = 360.2 L.K / 308.15 k
V₂ = 1.17 L
Which electron configuration is magnetic, paired or unpaired electrons
Answer:
paired electrons is magnetic configuration