The velocity of the pizza dough at the moment it was tossed into the air is 0 m/s (zero).
When an object is tossed upwards, it starts with an initial velocity of zero. As the object rises, its velocity decreases due to the acceleration of gravity until it reaches its maximum height where its velocity is zero. At this point, the object then starts to fall back down with increasing velocity until it reaches its initial height, at which point its velocity is equal in magnitude but opposite in direction to the initial velocity.
In this case, the pizza dough was caught at the same height it was tossed from, so its initial and final heights are the same, and thus its initial velocity is zero.
To learn more about Velocity, here
https://brainly.com/question/17127206
#SPJ4
a common way to describe acceleration is to express it in multiples of g, earth's gravitational acceleration. if a dragster accelerates at a rate of 39.2 m/s2, how many g's does the driver experience?
The acceleration of the dragster in multiple of g, when he accelerates at a rate of 39.2 m/s², is 4g.
To express the acceleration of the dragster in multiples of g, we need to divide the acceleration by the acceleration due to gravity on Earth.
Number of g's = (Acceleration of the dragster) / (Earth's gravitational acceleration)
First, we need the value of Earth's gravitational acceleration, which is approximately 9.81 m/s².
Now, we can use the given acceleration of the dragster (39.2 m/s²) and the formula:
Number of g's = (39.2 m/s²) / (9.81 m/s²) = 4
Therefore, the driver of the dragster experiences an acceleration equivalent to about 4 times the acceleration due to gravity on Earth.
Learn more about acceleration:
https://brainly.com/question/460763
#SPJ11
what is the quantum number of an electron confined in a 5.4- nm -long one-dimensional box if the electron's de broglie wavelength is 1.8 nm ?
The calculation produced a non-integer number using the supplied inputs. The values provided may include approximations or rounding mistakes as a result.
How can the de-Broglie wavelength of an electron at a certain speed be determined?The following is a definition of the deBroglie wavelength: Lambda is the Greek letter for wavelength, while h, Planck's constant, m, and v are the particle's mass and velocity.
The following equation describes the energy levels of an electron contained in a one-dimensional box:
E = (n² * h²) / (8 * m * L²)
An electron's de Broglie wavelength is determined by: λ = h / p
The following equation can be used to link an electron's energy and momentum: E = p² / (2 * m)
In the equation above, we can solve for p by inserting the expression for and obtain: p = h / λ
Using this expression as p's replacement in the energy equation, we obtain: E = (n² * h² * λ²) / (8 * m)
The box's length, L, and de Broglie's wavelength,, are both given as 5.4 nm and 1.8 nm, respectively. Planck's constant, h = 6.626 x 10⁻³⁴ J*s, and the mass of an electron, m = 9.1094 x 10⁻³¹ kg, respectively.
In the following equation, we can solve for n by substituting these numbers. The result is:
n = sqrt(8 * m * E) / (h * λ)
To know more about wavelength visit:-
https://brainly.com/question/30611426
#SPJ1
water is drawn from a well in a bucket tied to the end of a rope whose other end wraps around a cylinder of mass 50 kg and diameter 25 cm. as you turn this cylinder with a crank, the rope raises the bucket. if the mass of a bucket of water is 20 kg, what torque must you apply to the crank to raise the bucket of water at a constant speed?
m_c (mass of cylinder)=50 kg
d=25 cm so r=12.5 cm = 0.125 m m_b
(mass of bucket)=20 kg
So using the equations: RT = � = I � RT= I � (m_b)g-T= (m_b)aR And from what I understand, this is the same as the tangential acceleration? (m_b)g-T=(m_b) � r = F T= ( i � ) / r (m_b)g -(( i � ) / r ) = m � r � ( ((m_b)r) + (I /R ) ) = (m_b)g Leaving us with the final : � = ((m_b)g)/(((m_b)r) + (I /r)) Using this equation, I found I = 0.390625 and the final answer would be 35 rad/s^2 Sorry for such a long post--this is my first time on the website and I read the rules so hopefully I've done everything correctly! Thank you all!
/
. for schrodinger's equation of the h2 molecule, the kinetic energy has contributions from a. electrons only b. nuclei only c. both electrons and nuclei d. only one electron and one nucleus
The kinetic energy in Schrödinger's equation for the H2 molecule includes contributions from both electrons and nuclei. Thus the correct option is C.
The kinetic energy term in Schrödinger's equation for the H2 molecule refers to the energy involved in the motion of the particles. The H2 molecule comprises two hydrogen nuclei and two electrons, therefore the electrons and the nuclei both contribute to the kinetic energy.
The nuclei contribute to the kinetic energy by their mobility, whereas the electrons do so through their wave-like behaviour. The H2 molecule's kinetic energy term in Schrödinger's equation includes contributions from both electrons and nuclei, making option C the right response.
Learn more about kinetic energy:
https://brainly.com/question/30285686
#SPJ4
The kinetic energy in Schrödinger's equation for the H2 molecule includes contributions from both electrons and nuclei. Thus the correct option is C
explanation - For Schrödinger's equation of the H2 molecule, the kinetic energy has contributions from both electrons and nuclei. This is because the kinetic energy term in the equation accounts for the motion of all particles in the system, which in this case includes both the electrons and nuclei of the H2 molecule. Therefore, options a, b, and d are incorrect.
To know more about the schrodinger equation, click on this -
brainly.com/question/31441754
#SPJ11
a circuit breaker is rated for a current of 15 a rms at a voltage of 240 v rms. (a) what is the largest value of imax that the breaker can carry?
The largest value of I_max that the breaker can carry is approximately 21.21 A.
Given a circuit breaker rated for 15 A RMS at 240 V RMS, we want to find the largest value of Imax (maximum current) that the breaker can carry. To do this, we'll use the following formula:
I_max = √2 * I_RMS
Where I_RMS is the rated current in RMS, which is 15 A in this case.
Substitute the value of I_RMS into the formula:
Imax = √2 * 15 A
Calculate the value of Imax:
Imax ≈ 21.21 A
Therefore approximately 21.21 A is the largest value of Imax that the breaker can carry.
More on circuit breaker: https://brainly.com/question/29480920
#SPJ11
Potable water is ____.
A. also known as industrial wastewater
B. also known as irrigation water
C. also known as sewage
D. also known as groundwater
E. fit for drinking
Potable water is fit for drinking. Option E
What is portable water?Potable water is water that is safe for human consumption and considered fit for drinking. It is free from harmful bacteria, viruses, chemicals, and other contaminants that can cause health problems.
Potable water can come from different sources such as groundwater, surface water, or treated wastewater, and it is typically treated and disinfected to ensure its safety before being distributed to consumers.
Portable water isn't known as industrial wastewater, irrigation water, groundwater and sewage.
Find more exercises on portable water;
https://brainly.com/question/2570757
#SPJ1
the command module of the apollo spacecraft can be modelled as a truncated cone with a base diameter of 3.9 meters, a diameter at the upper (apex) end of 1.3 meters and a length of 3.5 meters. suppose the base of the spacecraft is encircled by a metal ring which is an excellent conductor. the magnitude and direction of the earth's magnetic field do not vary significantly over a distance the size of the spacecraft. if the spacecraft is oriented while in orbit so that its long axis is parallel to the earth's magnetic field, which has a magnitude of 1.0 x 10-4 t, and it then rotates about a perpendicular axis, which one of maxwell's equations allows us to calculate how much current will flow in the metal ring?
The Maxwell's equation that allows us to calculate the current flowing in the metal ring is Faraday's Law of Electromagnetic Induction, which states that the magnitude of the induced EMF (electromotive force) is equal to the rate of change of magnetic flux through a conducting loop.
In this case, the rotating Apollo spacecraft generates a changing magnetic flux through the metal ring due to its motion through the Earth's magnetic field. Therefore, an EMF is induced in the metal ring, which causes a current to flow.
To calculate the magnitude of this current, we need to know the rate of change of the magnetic flux through the metal ring. This can be found by taking the time derivative of the magnetic flux. Since the spacecraft is rotating about a perpendicular axis, the magnetic flux through the metal ring will vary sinusoidally with time. Therefore, we can express the time-varying magnetic flux through the metal ring as:
Φ(t) = Φmax sin(2πft)
where Φmax is the maximum magnetic flux through the metal ring, f is the frequency of the spacecraft's rotation, and t is time.
Taking the time derivative of this expression, we get:
dΦ/dt = Φmax (2πf) cos(2πft)
This expression gives us the rate of change of magnetic flux through the metal ring, which is proportional to the induced EMF. Finally, by applying Ohm's Law (V = IR) to the metal ring, we can calculate the current flowing in the ring. The current is given by:
I = V/R
where V is the induced EMF and R is the resistance of the metal ring. The resistance of the ring depends on its material properties and dimensions.
More on Maxwell's equations: https://brainly.com/question/17059433
#SPJ11
Is it true that if you double the length of a wire, you cut the resistance in half
No, doubling the length of a wire does not necessarily result in cutting the resistance in half. The resistance of a wire depends on several factors, including its length, cross-sectional area, temperature, and the resistivity of the material.
What is Resistance?
Resistance is a measure of how much a material opposes the flow of electric current. It is a fundamental property of electrical circuits and is denoted by the symbol "R". Resistance is typically measured in ohms (Ω), and it determines how much voltage (V) is required to drive a given current (I) through a material or a circuit.
According to Ohm's Law, the resistance (R) of a wire is directly proportional to its length (L) and resistivity (ρ), and inversely proportional to its cross-sectional area (A). Mathematically, this relationship is expressed as:
R = ρ * (L / A)
Learn more about Resistance from the given link
https://brainly.com/question/17563681
#SPJ1
The majority of Venus's surface is:
A. volcanic plains with flowing lava.
B large, flat mesas with tiny valleys.
C. thick, soupy clouds of hydrogen.
D. frozen dunes of dust and sand.
Answer:
C.
Explanation:
When Venus surface get bit cold when weather hits the planet gets soupy clouds and etc.
help me please oml 2 one
Color: Both the bromine gas and steak have a brownish color.
What is bromine gas?Bromine gas is a reddish-brown, nonflammable, and highly toxic gas with a very strong, unpleasant odor. It is composed of two heavy, diatomic, halogen molecules, Br2, and is the only nonmetal element that exists as a liquid at room temperature. Bromine gas is denser than air and is soluble in water and organic solvents.
Texture: The bromine gas is a gas and therefore has no texture, while the steak is solid and has a firm texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the steak, which is at room temperature.
Bromine Gas and Juice:
Color: The bromine gas is brownish and the juice is a yellowish or orange color.
Texture: The bromine gas is a gas and therefore has no texture, while the juice is a liquid and has a smooth texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the juice, which is at room temperature.
To learn more about bromine gas
https://brainly.com/question/1126306
#SPJ1
of the options below, what is the least accurate word to use to describe what happens when one car hits another?
The least accurate word to use when describing a car collision is "accidental."
When a vehicle collides with another vehicle, a person, an animal, road debris, or another moving or stationary barrier, such as a tree, pole, or building, the collision is referred to as a traffic collision, sometimes known as a motor vehicle collision (or a car crash if cars are involved in the incident).
While some collisions may be accidental in nature, many are caused by reckless or negligent behavior on the part of one or both drivers. Using the term "accidental" can imply that the collision was unavoidable or unforeseeable, which may not be the case. A more accurate term to use would be "collision," "crash," or "impact."
More on car collision: https://brainly.com/question/30263098
#SPJ11
at the sea level the plane can takeoff at the speed of 150 mi/hr. what is the required takeoff speed at albuquerque
The indicated airspeed (IAS) of the aircraft should be raised by roughly 2% for every 1,000 feet above sea level, according to a pilot's rule of thumb.
In order to generate enough lift during takeoff from a sea level airport, an aeroplane must attain a specific speed. Less dense air can be found at higher altitudes, such at Albuquerque, where the airport is situated at an altitude of 5,355 feet above sea level.
This necessitates a faster takeoff speed. Generally speaking, the plane's takeoff speed must rise by around 2% for every 1,000 feet of height. Under normal conditions and with conventional aeroplane characteristics, the estimated necessary takeoff speed at Albuquerque would be roughly 166 miles per hour.
The indicated airspeed (IAS) of the aircraft should be raised by roughly 2% for every 1,000 feet above sea level, according to a pilot's rule of thumb.
Learn more about indicated airspeed:
https://brainly.com/question/28206041
#SPJ4
higher takeoff speed to generate enough lift to take of
The required takeoff speed at Albuquerque would depend on several factors such as altitude, temperature, and runway length. If Albuquerque is at a higher altitude than sea level, the air is less dense and the plane would require a higher takeoff speed to generate enough lift to take off.
Additionally, if the temperature is higher, the air is less dense and the plane would also require a higher takeoff speed. The length of the runway at Albuquerque would also play a role in determining the required takeoff speed. Without more specific information, it is difficult to provide an exact answer to your question.
To learn more about take off speed, click on this -
brainly.com/question/31102197
#SPJ11
experimental tests have shown that hammerhead sharks can detect magnetic fields. in one such test, 100 turns of wire were wrapped around a 7.0-m-diameter cylindrical shark tank. a magnetic field was created inside the tank when this coil of wire carried a current of 1.5 a. sharks trained by getting a food reward when the field was present would later unambiguously respond when the field was turned on. a. what was the magnetic field strength in t in the center of the tank due to th
The magnetic field strength at the center of the shark tank is approximately 1.7 x [tex]10^-^5[/tex] T, created by a coil of wire with 100 turns, a radius of 3.5 m, and a current of 1.5 A.
How find the magnetic field strength at the center of the shark tank?We can use the formula for the magnetic field at the center of a circular loop of wire to determine the magnetic field strength in the center of the shark tank:
B = (μ0 * N * I) / (2 * R)
where B is the magnetic field strength, μ0 is the permeability of free space, N is the number of turns of wire, I is the current, and R is the radius of the loop.
Plugging in the given values, we get:
B = (4π * [tex]10^-^7[/tex] T*m/A * 100 turns * 1.5 A) / (2 * 3.5 m)
B = 1.7 × [tex]10^-^5[/tex] T
Therefore, the magnetic field strength in the center of the shark tank due to the coil of wire is approximately 1.7 × [tex]10^-^5[/tex] T.
Learn more about Magnetic field strength
brainly.com/question/28104888
#SPJ11
if the display is located 12.8 cm from the 12.0- cm focal length lens of the projector, what is the distance between the screen and the lens?
The distance between the screen and the lens of the projector is approximately 6.19 cm.
To determine the distance between the screen and the lens of the projector, we can use the lens formula:
1/f = 1/v - 1/u
Where:
f = focal length of the lens (12.0 cm)
v = distance of the image (screen) from the lens (unknown)
u = distance of the object (display) from the lens (12.8 cm)
Plugging in the values into the lens formula:
1/12.0 = 1/v - 1/12.8
Now, let's solve for v:
1/v = 1/12.0 + 1/12.8
1/v = (12.8 + 12.0) / (12.0 * 12.8)
1/v = 24.8 / 153.6
v = 153.6 / 24.8
v ≈ 6.19 cm
Therefore, the distance between the screen and the lens of the projector is approximately 6.19 cm.
Learn more about lens formula, here:
https://brainly.com/question/30241648
#SPJ12
standing waves result from the superposition of two waves that have group of answer choices the same amplitude, frequency, and direction of propagation. the same amplitude and frequency and opposite directions of propagation. the same amplitude, slightly different frequencies, and the same direction of propagation. the same amplitude, slghtly different frequencies, and opposite directions of propagation.
The correct option is B, Standing waves result from the superposition of two waves that have the same amplitude and frequency and opposite directions of propagation .
Amplitude is a fundamental concept in physics and refers to the maximum displacement or distance of an oscillating system from its equilibrium position. It is commonly used to describe the magnitude of a wave or vibration, and is measured in units such as meters or volts.
In the context of waves, amplitude represents the maximum height or depth of the wave crest or trough, and is often used to describe the intensity or strength of the wave. In sound waves, amplitude is directly related to the loudness or volume of the sound, with larger amplitudes corresponding to louder sounds. In electrical engineering, amplitude refers to the maximum voltage or current of an alternating current (AC) waveform.
To learn more about Amplitude visit here:
brainly.com/question/8662436
#SPJ4
Complete Question:-
Standing waves result from the superposition of two waves that have
a. the same amplitude, frequency, and the direction of propagation.
b. the same amplitude and frequency and opposite directions of propagation .
c. the same amplitude, slightly different frequencies, and the same direction of propagation.
d.the same amplitude, slightly different frequencies, and opposition directions of propagation
Please help I need to answer fast the fate of my graduation depends on it.
First, we need to find the total mass of the system by adding the masses of the two objects: m_total = m1 m2 = 50.0 kg 75.0 kg = 125.0 kg Next, we can plug in the given force and mass values into the equation: F = ma 40.0 N = 125.0 kg * a Solving for a: a = 40.0 N
125.0 kg * a
Solving for a:
a = 40.0 N / 125.0 kg
a = 0.32 m/s^2
Therefore, the acceleration of the system is 0.32 m/s^2.
14. when a beam of light that is traveling in air is reflected by a glass surface, there is a a. 45o phase change in the reflected beam. b. 60o phase change in the reflected beam. c. 90o phase change in the reflected beam. d. 180o phase change in the reflected beam. e. no phase change in the reflected beam.
There is no phase shift in the reflected beam of light when it hits a glass surface while it is moving through the air. No phase shift in the reflected beam is, therefore, option e, which is the right choice.
This is due to the laws of reflection, which state that the angle of incidence (the angle between the incident ray and the normal to the surface) is equal to the angle of reflection (the angle between the reflected ray and the normal to the surface), which govern how light is reflected at a boundary between two media.
Since the light's wavelength or frequency are not altered upon reflection at a boundary, there is no phase shift in the light.
Learn more about beam of light
https://brainly.com/question/21441738
#SPJ4
what does the technique of interferometry allow?what does the technique of interferometry allow?it allows two or more telescopes to obtain a total light-collecting area much larger than the total light-collecting area of the individual telescopes.it allows us to determine the chemical composition of stars.it allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.it allows the same telescope to make images with both radio waves and visible light.it allows astronomers to make astronomical observations without interference from light pollution.
The technique of interferometry allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.
This is achieved by combining the signals received by the telescopes to create a single image with a higher resolution. Interferometry is especially useful for studying objects with small angular sizes, such as stars and planets.
Additionally, interferometry allows astronomers to make astronomical observations without interference from light pollution, as it can separate the signals from the object being observed from the background light.
However, interferometry does not directly determine the chemical composition of stars, although it can provide information about their temperature and other physical properties.
Learn more about interferometry:
https://brainly.com/question/30054443
#SPJ11
Which word best describes something that works in the same way as a radar
The word that best describes something that works in the same way as a radar is "sonar".
Sonar is an acronym for "sound navigation and ranging," and it is a technology that uses sound waves to detect and locate objects underwater. Sonar works by emitting a sound wave or pulse and then measuring the time it takes for the sound to bounce back from an object and return to the source. This information is then used to calculate the distance to the object and its location. Like radar, sonar is used in a variety of applications, including military, scientific, and commercial.
To know more about Sonar , here
brainly.com/question/4955683
#SPJ4
what would be the difference between the time t measured by an observer moving at 30 m/s and the proper time t0 for a proper time interval of 1 hour (3600 s )? the answer is small but nonzero. you will need to find an expression for the time difference using the approximation given in this problem before you substitute in the numbers; otherwise your calculator will just give zero.
The time difference between the measured time and the proper time is very small, approximately [tex]2 * 10^{-18}[/tex] seconds, but still nonzero.
According to the theory of relativity, time intervals are relative to the observer's motion. The proper time interval, denoted by t0, is the time interval measured by an observer who is stationary relative to the event being timed.
Let's consider an observer moving at a constant velocity of 30 m/s relative to a stationary observer. We want to find the difference between the time t measured by the moving observer and the proper time t0 for a proper time interval of 1 hour (3600 s).
The time dilation formula is given by:
[tex]t = \gamma t_0[/tex]
where γ is the Lorentz factor, which depends on the relative velocity between the two observers:
[tex]\gamma = \frac{1}{\sqrt{1 - \frac{v^2}{c^2}}}[/tex]
where v is the relative velocity (in this case, 30 m/s) and c is the speed of light (299,792,458 m/s).
Substituting the values given in the problem, we have:
[tex]\gamma = \frac{1}{\sqrt{1 - \left(\frac{30 \text{ m/s}}{299{,}792{,}458 \text{ m/s}}\right)^2}} \approx 1.000000000000000002[/tex]
where ≈ means "approximately equal to". We can see that the value of γ is very close to 1, which means that the time dilation effect is very small but still nonzero.
Now we can find the time difference by subtracting the proper time t0 from the measured time t:
[tex]\Delta t = t - t_0 = \gamma t_0 - t_0 = (\gamma - 1)t_0[/tex]
Substituting the values we found, we have:
[tex]\Delta t = (1.000000000000000002 - 1) * 360 s ≈ 0.000000000000000002 s[/tex]
So the time difference between the measured time and the proper time is very small, approximately [tex]2 * 10^{-18}[/tex] seconds, but still nonzero.
For more such questions on time , Visit:
https://brainly.com/question/30078703
#SPJ11
15) monochromatic coherent light shines through a pair of slits. if the distance between these slits is decreased, which of the following statements are true of the resulting interference pattern? (there is more than one correct choice.) a) the distance between the maxima stays the same. b) the distance between the maxima decreases. c) the distance between the minima stays the same. d) the distance between the minima increases. e) the distance between the maxima increases.
Two of the correct statements regarding this are:
b) the distance between the maxima decreases
d) the distance between the minima increases
When monochromatic coherent light shines through a pair of slits, an interference pattern is created. This pattern is dependent on the distance between the slits. If the distance between the slits is decreased, the resulting interference pattern will be affected.
When the distance between the slits is decreased, the interference pattern becomes wider, and the distance between the maxima decreases. The distance between the minima, on the other hand, increases.
This is because the interference pattern is created by the interaction of waves, and when the distance between the slits is decreased, the waves interfere with each other differently.
This causes the pattern to shift and change. Therefore, the resulting interference pattern is affected by the distance between the slits.
To learn more about : minima
https://brainly.com/question/29512870
#SPJ11
light of wavelength 105 nm falls on a metal surface for which the work function is 5.00 ev. what is the minimum de broglie wavelength of the photoelectrons emitted from this metal?
To find the minimum de Broglie wavelength of the photoelectrons emitted from this metal, we need to first find the kinetic energy of the emitted electrons.
The energy of the incident photon can be calculated using the formula:
E = hc/λ
where h is Planck's constant, c is the speed of light, and λ is the wavelength of the incident light.
Plugging in the values given, we get:
E = (6.626 x 10^-34 J s) x (3.00 x 10^8 m/s) / (105 x 10^-9 m)
E = 1.89 x 10^-17 J
To find the kinetic energy of the emitted electrons, we need to subtract the work function (the minimum energy required to remove an electron from the metal) from the energy of the incident photon:
K.E. = E - φ
where φ is the work function.
Plugging in the values given, we get:
K.E. = (1.89 x 10^-17 J) - (5.00 eV x 1.60 x 10^-19 J/eV)
K.E. = 1.12 x 10^-18 J
Now, we can use the de Broglie wavelength equation to find the minimum de Broglie wavelength of the photoelectrons:
λ = h/p
where p is the momentum of the electron, given by:
p = √(2mK.E.)
where m is the mass of the electron.
Plugging in the values given, we get:
p = √(2 x 9.11 x 10^-31 kg x 1.12 x 10^-18 J)
p = 1.65 x 10^-24 kg m/s
Now, we can use this momentum value to find the de Broglie wavelength:
λ = (6.626 x 10^-34 J s) / (1.65 x 10^-24 kg m/s)
λ = 4.01 x 10^-10 m
Therefore, the minimum de Broglie wavelength of the photoelectrons emitted from this metal is 4.01 x 10^-10 m.
To know more about de Broglie wavelength :
https://brainly.com/question/30404168
#SPJ11
how far from the nut of the guitar must a fret (and your finger) be placed on this string to play g (392 hz )?
To play G note (392 Hz) on a guitar string, place the fret and your finger at a distance of approximately 40.4 cm (or 16 inches) from the nut of the guitar.
The distance that the fret and your finger must be placed from the nut of the guitar is determined by the length of the string that is allowed to vibrate when the string is plucked. The length of the vibrating string determines the frequency of the sound produced by the guitar string.
The distance from the nut of the guitar to the fret that must be placed to play a G note with a frequency of 392 Hz can be calculated using the formula:
[tex]L = (v / 2f) * (n^2 - 1)[/tex]
where L is the length of the string from the nut to the fret, v is the velocity of the wave (which is dependent on the tension and mass per unit length of the string), f is the frequency of the note, and n is the fret number (with n=1 corresponding to the distance from the nut to the first fret).
For a standard guitar tuning and using typical values for the velocity of the wave and string tension, the distance from the nut to the third fret would be approximately 40.4 cm to play a G note with a frequency of 392 Hz.
Learn more about The distance
https://brainly.com/question/15172156
#SPJ4
019 (part 1 of 2) 10.0 points
A Carnot engine has a power output of
197 kW. The engine operates between two
reservoirs at 20◦C and 425◦C.
How much thermal energy is absorbed each
hour?
Answer in units of J.
020 (part 2 of 2) 10.0 points
How much thermal energy is lost per hour?
Answer in units of J.
Thermal energy is absorbed each hour is 13.53 x 10¹² J and thermal energy lost per hour is 7.092 x 10¹² J.
What is the Carnot engine's operating principle?a technique of isothermal gas expansion that is reversible. In this process, the ideal gas in the system receives amount heat from a heat source at a high temperature Thigh, expands and does work on surroundings. a technique of adiabatic gas expansion that is reversible. The system is thermally insulated throughout this process.
Temp_cold = 20°C + 273.15 = 293.15 K
Temp_hot = 425°C + 273.15 = 698.15 K
efficiency = 1 - (Temp_cold / Temp_hot)
= (698.15 K * 293.15 K) / (698.15 K)² - (293.15 K)²
efficiency = 0.524 or 52.4%
thermal energy absorbed/ hour = power output / efficiency
= 197 kW / 0.524
= 375.95 MJ/h x 3.6 x 10⁶ J/kWh = 13.53 x 10¹² J
thermal energy is lost per hour
W = power output x time = 197 kW x 1 h = 197 kWh
W = 197 kWh x 3.6 x 10⁶ J/kWh = 7.092 x 10¹²1J
Since the engine is running in a cycle, the system's internal energy is equal to zero, hence U = 0.
Q = ΔU + W
hence, thermal energy lost per hour = Q = W = 7.092 x 10^11 J
To know more about thermal energy visit:-
https://brainly.com/question/27359499
#SPJ1
what principle is responsible for light spreading as it passes through a narrow slit? a) refraction b) polarization c) diffraction d) dispersion
The principle responsible for light spreading as it passes through a narrow slit is diffraction hence correct choice is c) diffraction.
The act of bending light around corners such that it spreads out and illuminates regions where a shadow is anticipated is known as diffraction of light. In general, since both occur simultaneously, it is challenging to distinguish between diffraction and interference.
Diffraction occurs when a wave, such as light, encounters an obstacle or a slit and bends around it, causing the wave to spread out. In the case of light passing through a narrow slit, this spreading results in an interference pattern that can be observed on a screen placed behind the slit.
More on diffraction: https://brainly.com/question/14081452
#SPJ11
what is the typical voltage drop (in volts) across the collector and emitter (vce) of a bjt when in saturation?
The VCE voltage drop in saturation for a typical BJT can be assumed to be between 0.1V and 0.3V.
How VCE voltage drop in saturation for a typical BJT?The voltage drop across the collector and emitter (VCE) of a bipolar junction transistor (BJT) when it is in saturation depends on several factors such as the type of BJT, the collector current, and the biasing conditions.
However, as a general rule of thumb, the VCE voltage drop in saturation for a typical BJT can be assumed to be between 0.1V and 0.3V, depending on the specific characteristics of the transistor. This value may vary based on the operating conditions and the specific transistor used.
It's worth noting that the VCE voltage drop in saturation is typically lower than the voltage drop in the active region, where the BJT behaves as a current amplifier. In the active region, the VCE voltage drop can range from a few tenths of a volt up to several volts, depending on the transistor's characteristics and operating conditions.
Learn more about voltage drop
brainly.com/question/31431320
#SPJ11
A bow is drawn so that it has 40 J of potential energy. When fired, the arrow will have a kinetic energy of: Select one: O a. 80) o b. 20) O 0.60) O d. 40)
When a bow is drawn and has 40 J of potential energy, the arrow's kinetic energy when fired will be:
Your answer: d. 40 J
Explanation:
Potential energy is the energy that an object possesses due to its position, configuration, or state of being. It is stored energy that has the potential to do work in the future. The amount of potential energy that an object has depends on its position or configuration relative to other objects or systems. For example, a bow that is pulled back has potential energy that can be released as kinetic energy when it is released.
Kinetic energy, on the other hand, is the energy that an object possesses due to its motion. It is the energy that an object possesses because it is in motion and is able to do work by causing a change in another object's motion or position. The amount of kinetic energy that an object has depends on its mass and its velocity. For example, a moving car has kinetic energy that can be transferred to another object if it collides with it.
When the bow is drawn, it stores potential energy. When fired, this potential energy is converted into kinetic energy for the arrow. In an ideal situation with no energy loss, the arrow's kinetic energy will be equal to the bow's potential energy. Therefore, the arrow will have a kinetic energy of 40 J.
To learn more about Potential Energy and Kinetic Energy. Please Visit:
https://brainly.com/question/30176483
#SPJ11
the james webb space telescope is scheduled to launch in 2018. in what range of the electromagnetic spectrum will it operate?
The James Webb Space Telescope is designed to operate primarily in the infrared portion of the electromagnetic spectrum, with a wavelength range of 0.6 to 28 microns.
What is the James Webb Space TelescopeThe James Webb Space Telescope (JWST) is a large, infrared-optimized space telescope that was originally scheduled to launch in 2018, but has since been delayed multiple times.
The range for JWST is a much wider range than the Hubble Space Telescope, which operates mainly in the visible and ultraviolet parts of the spectrum. By studying the infrared light emitted by stars and galaxies, the JWST will be able to observe objects that are too faint or too distant to be seen by other telescopes, and will provide new insights into the early universe, the formation of galaxies, and the formation of stars and planetary systems.
Learn more about James Webb Space Telescope at
https://brainly.com/question/8962979
#SPJ1
.A cannonball is launched upward with a velocity of 73.5 m/s at an angle of 20 degrees above the
horizontal.
(a) How long is the cannonball in the air?
(b) How far away does it land?
() How high does it travel? Cut your time in half!
Answer:
time of flight=( 2U sinx ) ÷ g
Explanation:
a)
u=73.5m/s , x= 20° , g =10m/s^2 then t= {2×73.5 × sin 20°} ÷ 10 = 134.2 ÷ 10 = 13.42 sec b) range is the distance, range= (u^2 sin 2 x ) ÷g = ({73.5 }^2 × sin 2 × 20 )÷ 10 =4025.3÷10 = 402.53meters. I couldn't finish the question so sorry
a drawing, provided by the manufacturer, that details permitted interconnections between the intrinsically safe and associated apparatus or between the nonincendive field wiring apparatus or associated nonincendive field wiring apparatus is called a
The drawing provided by the manufacturer, which details the permitted interconnections between intrinsically safe and associated apparatus or between nonincendive field wiring apparatus or associated nonincendive field wiring apparatus, is called a wiring diagram.
A wiring diagram typically includes detailed information about the wiring connections between components, as well as any necessary safety measures such as grounding or shielding. It may also include information about the voltage, current, and power requirements of the system, as well as any limitations or restrictions on the use of particular components or configurations.
This diagram is a critical part of the installation and maintenance process for intrinsically safe and nonincendive electrical systems, as it helps ensure that the correct connections are made and that the system operates safely and effectively.
To learn more about diagram follow the link:
https://brainly.com/question/11729094
#SPJ4
The complete question is:
A drawing, provided by the manufacturer, that details permitted interconnections between the intrinsically safe and associated apparatus or between the nonincendive field wiring apparatus or associated nonincendive field wiring apparatus is called a ______________