Answer:
20.03g
Explanation:
This is the formula for percentage yield:
Percentage yield = Actual Yield / Theoretical yield
Rearrange it to get the Actual yield, which would be:
Actual yield = Percentage yield (in decimal form) x Theoretical yield
We know that 75% of CO2 is produced as the percentage yield in a reaction and the theoretical yield for the mass we're supposed to find is 26.7 grams.
Percentage yield in decimal form: 0.75
Theoretical yield: 26.7g
Plug it in the equation
Actual yield = 0.75 x 26.7g
Actual yield = 20.03g
how many grams are in 4.07x10^15 molecules of calcium hydroxide
There are 5.01 × 10-⁷grams in 4.07 x 10¹⁵molecules of calcium hydroxide.
HOW TO CALCULATE MASS:
The mass of a substance can be calculated by multiplying the number of moles in the substance by its molecular mass.
However, given that the number of molecules in calcium hydroxide is 4.07 x 10¹⁵molecules, we need to calculate the number of moles in Ca(OH)2 as follows:
no. of moles of Ca(OH)2 = 4.07 x 10¹⁵ ÷ 6.02 × 10²³
no. of moles = 0.676 × 10-⁸
no. of moles = 6.76 × 10-⁹ moles.
Molar mass of Ca(OH)2 = 74.093 g/mol
Mass of Ca(OH)2 = 74.093 × 6.76 × 10-⁹ moles
Mass = 5.01 × 10-⁷grams.
Therefore, there are 5.01 × 10-⁷grams in 4.07 x 10¹⁵molecules of calcium hydroxide.
Learn more about how to calculate mass at: https://brainly.com/question/8101390?referrer=searchResults
“Burning of fossil fuels causes pollution.” Suggest alternative methods by
which we can overcome this global issue in less than 250 words.
An alternative method by which we can overcome this global issue is by harnessing Solar energy.
Discussion:
Fossil fuels cause environmental pollution. This is because they are organic compounds and on combustion, they release air pollutants such as, Carbon monoxide.
As a panacea, the use of solar panels for harnessing Solar energy in a bid to replace energy from fossil fuels will prove to be am effective method by which we can overcome the global issue of pollution caused by burning of fossil fuels.
Solar energy is a clean source of energy as there's no release of harmful air pollutants.
Read more on fossil fuels:
https://brainly.com/question/14432674
Alternative method by which we can overcome this global issue is by
harnessing energy with less form of pollution. These include:
Solar energyHydropowerNuclear energyFossil fuel burning releases greenhouse gases such as Carbon dioxide,
nitrous oxide etc which causes pollution to the atmosphere.
It is best to adopt alternative methods mentioned above to ensure pollution
is reduced to the barest minimum. This helps to prevent ozone depletion and
global warming. It also reduces risks of respiratory diseases due to the
inhalation of the gases.
Read more about Energy sources here https://brainly.com/question/1222227
report the elements half life. if we start with 100g of your element (platinum) how long will it take to have 6.26g?
Answer:
did u get the answer yet
Explanation:
What are the molecular formulae of the following compounds ?
Hydrochloric acid, sulphuric acid, sodium chloride, glucose, methane.
Let's see
[tex]\\ \sf\longmapsto Hydrochloric\:acid=HCL[/tex]
[tex]\\ \sf\longmapsto Sulphuric\:acid=H_2SO_4[/tex]
[tex]\\ \sf\longmapsto Sodium\: Chloride=NaCl[/tex]
[tex]\\ \sf\longmapsto Glucose=C_6H_12O_6[/tex]
[tex]\\ \sf\longmapsto Methane=CH_4[/tex]
.
Answer:
the molecular formulae of the following compounds are:
Hydrochloric acid: HCl
Sulphuric acid:[tex]H_2SO_4[/tex]
sodium chloride: NaCl
glucose:[tex]C_6H_{12}O_6[/tex]
methane:[tex]CH_4[/tex]
Explanation:
Pls
Due today pls help asfast as possible
Answer: D. 10,000 km = Exosphere; 690 km = Thermosphere; 85 km Mesosphere; 50 km = Stratosphere; 20 km = Troposphere
2. True
3. True
4. True
5. True
Which statement best describes what happens to the stability of hydrogen and oxygen atoms when they form bonds in a water molecule?
Answer:
It's c
Explanation:
Because I've checked
12. Draw the dot diagram for a molecule of P2
[show your work and draw a box around your answer]
Explanation:
download the app topper
[tex]\rule{2000pt}{1000000pt}[/tex]
mamama
How far do you think a plate can move in one day?
Can water stay liquid below zero degrees Celsius?
nope it vaporized
.........pls Mark barinlist I
why do solids maintain their shape whereas fluids do not
Write method of manufacturing of oxygen gas from liquid air
Answer:
cryogenic distillation process
Explanation:
Cryogenic distinction between carbohydrates and harmon process.
how many fluid ounces can i take on a plane united
NO LINKS
Select the correct answer.
In which situation is chemical energy being converted to another form of energy?
A.
a lamp plugged into the electric grid
B.
a fluttering flag
C.
a floating wooden log
D.
a burning candle
when an electron is acquired by a neutral atom, the energy change is called
Answer:
when an electron is acquired by a neutron atom, the energy change is called its electron affinity
When an electron is added to a neutral atom to create a negative ion, the energy of the atom changes (in kJ/mole). This is how electron affinity is defined. Alternatively put, the possibility of the neutral atom receiving an electron.
What is electron affinity ?The amount of energy released when an electron binds to a neutral atom or molecule in the gaseous state to produce an anion is known as the electron affinity of an atom or molecule.
Although there is a slight distinction between the two, electron gain enthalpy is occasionally also referred to as electron affinity. The amount of energy released when an electron is added to a single gaseous atom is known as the electron gain enthalpy.
The amount of energy released when an atom receives an additional electron is known as its electron affinity. The gaseous state is when electron affinities are measured. On the periodic table, electron affinities tend to shift from negative to positive as we move from left to right.
Thus, when an electron is acquired by a neutral atom, the energy change is called as electron affinity.
To learn more about electron affinity, follow the link;
https://brainly.com/question/11302894
#SPJ5
PLEASE HELP ME I AM HAVING A PANIC ATTACK LOL
Answer:
160.3 g S
Explanation: hope that helps
In one to two sentences, explain how to compare the strength of electrostatic forces between molecules in salt water to the strength of electrostatic forces between molecules in freshwater. Include a description of the data to be collected and how that data would allow one to draw conclusions about the relative strengths of the electrostatic forces in the two substances.
The boiling point of salt water is greater than that of fresh water hence the electrostatic forces between molecules in salt water is greater than that between the molecules in salt water.
Fresh water contains does not contain dissolved solutes like salt water. Salt water contains a lot of dissolved mineral salts making the salt water to be rich in ions.
Generally, the boiling points of substances can serve as a measure of the strength of electrostatic forces between molecules in either kind of water. We will easily find the that the boiling point of salt water is far higher than that of fresh water indicating greater electrostatic forces between molecules in salt water than between molecules in fresh water.
Learn more about boiling point: https://brainly.com/question/2153588
Sasha did an experiment to study the solubility of two substances. She poured 100 mL of water at 20°C into each of two beakers labeled A and B She put 50 g of
Substance A in the beaker labeled A and 50 g of Substance B in the beaker labeled B. The solution in both beakers was stirred for 1 minute. The amount of substance
left undissolved in the beakers was weighed. The experiment was repeated for different temperatures of water and the observations were recorded as shown.
Experimental Observations
Mass of Undissolved Substance at Different Temperatures (gram)
20°C
40 °C
60°C
80 °C
Substance
А
12
11
9
8 8
B
45
40
34
31
Part 1: Which substance has a higher solubility?
Part 2: Explain your answer for Part 1
Answer:
Answer temperatures gram is correct because there is more of a mass of numbers and the numbers are higher. (don't really know this subject, just guessing, hope this helped.)
The substance A has higher solubility then substance B because the higher the temperature the easier the substance will dissolve.
What is solubility?The word solubility is defined as the ability of a substance, the solute, to form a solution with another substance, the solvent.
It can also be defined as a property that allow sugar molecule to dissolve.
It can be defined as at a given temperature, the amount of solute that can dissolve in a given amount of solvent.
In this reaction, increasing the pressure and temperature results in increased solubility. An increase in pressure causes more gas particles to enter the liquid, lowering the partial pressure.
For exothermic reaction the temperature increases with decrease in solubility and for endothermic reaction the temperature decreases with increase in solubility.
Thus, the substance A has higher solubility then substance B because the higher the temperature the easier the substance will dissolve.
To learn more about solubility, refer to the link below:
https://brainly.com/question/8591226
#SPJ5
15 points who can solve help plsss now
Answer:
C. Al and O2
Explanation:
The reactants are the elements or compounds that is becoming the result
So Al and O2
Hope this helps!
How many moles are in 1.93 x 10^24 atoms of gold
Answer:
We know that 1 mole equals to 6.02 x 10^23 atoms (which is Avogadro's number), so to get to atoms from moles, you would divide the atoms of gold by Avogadro's number
(1.93 x 10^24) / (6.02 x 10^23)
= 3.2 mol of gold (rounded)
It measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 3.21 moles of gold are in 1.93 x 10²⁴atoms of gold.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity of amount of substance. Mole is directly proportional to the given number of atoms.
Given number of atoms of gold= 1.93 x 10²⁴atoms
we know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
Mole of gold =given number of atoms of gold ÷ 6.022×10²³(Avogadro number)
Substituting all the given values, we get
Mole of gold = 1.93 x 10²⁴atoms ÷ 6.022×10²³(Avogadro number)
Moles of gold=3.21 moles of gold
Therefore, 3.21 moles of gold are in 1.93 x 10²⁴atoms of gold.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
What is one element that is not found in the human body, air, or the universe? Brainliest to whoever gets it right! PLEASE HELP! :) 20 points for the question also! :D
Answer:
Technetium. It is only found in the stars.
Explanation:
Sorry, but thats all I could find for tou
The are many elements which are not present in human body. But almost all the discovered elements are there in the universe. But the one which is not present in earth and air is technetium
What is an technetium ?Technetium is the first synthesized element by man in 1937. Technetium has no stable isotopes and it is not found in earth. But it is present in stars. However, rare earth elements such as promethium , francium etc. can be prepared or observed from uranium ores.
There are many elements especially some actinides and lanthanides which are not present in earth naturally existence on starts and other planets.
Human body is made of various elements including carbon, oxygen, nitrogen, various metals like iron, zinc etc. Various enzymes contains different elements but the number of elements which are in the surroundings of human and not inside is larger.
Therefore, all the discovered elements are found in the universe and some them are not present in earth.
To find more about elements, refer the link below:
https://brainly.com/question/24407115
#SPJ5
What state of matter has a defined volume but undefined shape?
Question 6 options:
gases
liquids
solids and liquids
liquids and gases
Answer:
Liquids
Explanation:
They have a certain volume but they take the shape of their container
How do you convert particles to moles, and mass to moles?
1) 77.56 g of CaCO3 to moles
2) 2.55 x 10^24 molecules of KCl to grams
3) 0.0931 mol of BaCl2 to grams
4) 1.55 x 10^22 molecules to moles
5) 0.664 moles of HF to molecules
6) 86 g of Fe(NO3)3 to moles
7) 7.88 x 10^23 molecules of CO2 to grams
8) 2.93 moles of MgF2 to grams
9) 7.56 g of MgCO3 to moles
10) 8.55 x 10^21 molecules of NaCl to grams
1. mol = 77.56/100 = 0.7756 mol
2. mol = 2.55 × 10^24/6.02 × 10^23 = 4.236 mol mass = 4.236 × 74.5 = 315.582 g
3. mass = 0.0931 × 208.3 = 19.393 g
4. mol = 1.55 × 10^22/6.02 × 10^23 = 0.0257 mol
5. molecules = 0.664 × 6.02 × 10^23 = 3.997 × 10^23 molecules
6. mol = 86/242 = 0.355 mol
7. mol = 7.88 × 10^23/6.02 × 10^23 = 1.309 mol mass = 1.309 × 44 = 57.596 g
8. mass = 7.56 × 62 = 468.72 g
9. mol = 7.56/84 = 0.09 mol
10. mol = 8.55 × 10^21/6.02 × 10^23 = 0.014 mol mass = 0.014 × 58.5 = 0.819 g
recheck to ensure all answers are correct
Liquids have a definite volume when poured into a container. What does this mean?
Answer:
A solid has definite volume and definite shape, a gas has neither definite volume nor definite shape, and as said in the question, a liquid has a definite volume but no definite shape.
What this means is that even though liquid molecules can slide past each other and move to fill up the space they are in (this means that liquids have no definite shape), they keep their volume. That is, liquids have consistent, unchanging volume.
Hopefully that's helpful! :)
How many molecules are in 0.750 moles of magnesium sulfide?
Answer:
4.51 x 10 to the 23 power
Explanation:
PLEASE HELP
2.How many atoms are in 3.35 moles of Aluminum?
3.How many moles of CO2 gas are in a 101.25 L container filled with CO2 gas?
4.What is the mass of 13.7 moles of N2 gas?
Answer:
2: 2.02 x 1024 atoms
3: 4.5201 atoms
4: 384 g/mol
Explanation: I'm in your class
what are two possible ways to show the structure of ch4?
Answer: Two possible ways to show the structure of CH4 are its electron dot diagram or structural formula. CH4 or methane's molecular formula is given as CH4. The structural formula is a graphical representation of a chemical compound.
Answer:
using electron dot diagrams or structional formula
what is the nature of the p-o bond in phosphorus pentoxide (p2o5)?
Answer:
the nature of the bond is covalent.
covalent bonds are bonds between 2 NON-METAL elements. since phosphorus and oxygen are both non-metals, the bond formed between them is covalent.
hope this answers your question!
I really need help please!
Part 1: Name the type of chemical reaction that occurs when aluminum (Al) reacts with copper nitrate (Cu(NO3)2).
Part 2: Explain why aluminum does NOT react with potassium nitrate (KNO3) although it reacts with copper nitrate.
Single-displacement reaction occurs when aluminum reacts with copper nitrate.
Single-displacement reaction is the type of chemical reaction that occurs when aluminum (Al) reacts with copper nitrate (Cu(NO3)2). In this type of reaction, aluminum takes the place of copper and produced aluminium nitrate.
Aluminum does not react with potassium nitrate (KNO3) although it reacts with copper nitrate because potassium nitrate (KNO3) is a stable compound which held each other very tightly so we can conclude that Single-displacement reaction occurs when aluminum reacts with copper nitrate.
Learn more about chemical reaction here: https://brainly.com/question/11231920
Learn more: https://brainly.com/question/25945286
Which example accurately describes a solution?
Typical examples of solutions are
Alcoholic beverage (ethanol in water)GasolineWhat is a solution?A solution can be defined as a mixture (homogeneous) of two or more substances typically a solute in a solvent, the solvent is usually in greater quantity and the substance or substances present in lesser amounts are the solutes.
Other good examples of a solutionCommon examples of solutions are sugar in water and salt in water solutions, soda water,
Furthermore, solutions can be homogenous or heterogenous
Learn more about solutions here:
https://brainly.com/question/2626617
carbondiooxide does not support in burning but mg burs in it why.?
To keep burning, fires require oxygen. Carbon dioxide is used in certain fire extinguishers to put out flames. Explanation: Because magnesium is higher on the reactivity scale than carbon, it is more reactive and eliminates oxygen from carbon dioxide (to give carbon and magnesium oxide).