Complete the mechanism for the given decarboxylation by adding any missing atoms, bonds, charges, nonbonding electrons, and curved arrows

The prompt seeks to explain how Philips uses digital governance in its sourcing approach or procurement.

Phillips was able to achieve this by hosting the "Supplier Development Group".

Then, various departments within Phillips met with the supplier's Group to find out how more raw materials could be gotten in the most environmentally friendly way possible.

Learn more about Digital Governance at:

https://brainly.com/question/381572

The new digital governance and sourcing approach is described as strategy to accelerate implementation.

Digital tools along with social media have empowered people to have access to infinite information and make connections globally. All the citizens or individuals are using digital based technologies to get hold of  benefits caused by using them.

Sourcing approach is used in supply chain management that gathers the information and used in an organization for purchasing power. This finds the best possible values in the marketplace. This strategy helps to attain business goals.

Learn more about Digital Governance.

https://brainly.com/question/381572

#SPJ4

Answer:

The apparatus would need to be extremely delicate because of the very small values being measured, the gravitational attraction of two massive objects.

(I) the torsion constant, measuring the deflection of massive objects would be very small and difficult to measure accurately

(II) since all surrounding objects are massive, it is difficult to remove the effect of such objects from forces being measured

(III) to consider a massive object as having all of its mass at its center, the massive object would need to be uniform throughout - any nonuniformity of the object would affect the calculations

(IV) all physical measurements would need to be made with utmost accuracy because of the relatively small distances involved with regard to the extremely small force being measured

(V) today laser measurements would assist in measuring small deflections accurately

Answer:

The foil makes the microwave spark it can smoke up and catch fie.

Explanation:

-The aluminum foil's sharp edges are what causes the fire, smoke, and sarks.

- Hope This Helps!

-Justin:)

Answer:

itll spark and catch fire

Explanation:

Answer:

[tex]\sqrt{v^{2} + 2\, g\, y}[/tex].

Explanation:

Apply the SUVAT equation [tex]{v_{1}}^{2} - {v_{0}}^{2} = 2\, a\, x[/tex] to the vertical component of the soccer ball's motion to find the vertical velocity right before the ball lands. In this equation:

Rearrange this equation to find an expression for the vertical velocity [tex]v_{1}[/tex] in terms of [tex]y[/tex] and [tex]g[/tex]:

[tex]\begin{aligned}v_{1} &= \sqrt{{v_{0}}^{2} + 2\, a\, x} \\ &= \sqrt{2\, g\, y}\end{aligned}[/tex].

Since air friction is negligible, the horizontal velocity of the ball would stay unchanged. Thus, the horizontal velocity of the ball would still be [tex]v[/tex] right before the ball lands.

Notice that these two components of velocity are perpendicular to one another. Thus, find the combined velocity of the ball right before landing could be found using Pythagorean's Theorem:

[tex]\sqrt{v^{2} + {v_{1}}^{2}} = \sqrt{v^{2} + 2\, g\, y}[/tex].

The work done on the object moving in the xy-plane that is subjected to the given applied force is determined as (2ab²i + 3b²j) J.

The magnitude of the force on the object is calculated as follows;

f = (2xyi + 3yj)

when;

x = a, and y = b

f = (2abi + 3bj)

The work done the applied force is the product of force and displacement of the object.

W = fΔs

where;

Δx = a - a = 0

Δy = 0 - b = -b

Δs = √(Δx² + Δy²)

Δs = √(-b)²

Δs = b

W = (2abi + 3bj) x b

W = (2ab²i + 3b²j) J

Thus, the work done by the applied force on the object is (2ab²i + 3b²j) J.

The complete question is below;

An object moving in the xy-plane is subjected to the force f = (2xyi + 3yj),  where x and y are in m. The particle moves from the origin to the point with coordinates (a, b) by moving first along the x-axis to (a, 0), then parallel to the y-axis. How much work does the force do?

Learn more about work done here: https://brainly.com/question/8119756

The work done on an item moving in the xy-plane that is subjected to a particular force is found as (2ab²i + 3b²j) J.

Work done is defined as the product of applied force and the distance through which the body is displaced on which the force is applied.

Work may be zero, positive, and negative.it depends on the direction of the body displaced. if the body is displaced in the same direction of the force, it will be positive.

The given data in the problem is;

F is the force applied;  f⃗ = (2xyi + 3yj)

Work done is found as the product of force and the body displacement;

[tex]\rm W = F \triangle S[/tex]

As the object is moving in the xy- plane. Displacement in the x direction;

[tex]\rm \triangle x = a-a \\\\ \triangle x =0[/tex]

Displacement in the y direction;

[tex]\rm \triangle y = 0-b \\\\ \rm \triangle y = -b \\\\[/tex]

The net displacement in the xy plane is;

[tex]\rm \triangle s= \sqrt{(\triangle x)^2+(\triangle y)^2 } \\\\\ \rm \triangle s= \sqrt{(0)^2+(-b)^2 } \\\\\ \triangle s= \sqrt{b^2} \\\\ \triangle s=b[/tex]

The work done is found as;

[tex]\rm W= F \triangle S \\\\ W=( 2 ab \vec i+3b \vec j) \triangle S\\\\ W= W=( 2 ab \vec i+3b \vec j) b \\\\\ W=(2ab^2 \vec i + 3b^2 \vec j)\ J[/tex]

Hence, the work done on an item moving in the xy-plane will be,[tex]\rm W=(2ab^2 \vec i + 3b^2 \vec j)\ J[/tex]

To learn more about the work done, refer to the link ;

https://brainly.com/question/3902440

#SPJ4

1)The strength of the magnetic field for particle 1 will be 2.8 T.

2)The magnitude of the magnetic force exerted on the particle will be 0.12 N.

It is the type of field where the magnetic force is obtained. With the help of a magnetic field. The magnetic force is obtained it is the field felt around a moving electric charge.

The given data in the problem is;

q₁ has a charge = 2.7 μc

v₁ is the velocity of particle 1 = 1 773 m/s.

F is magnetic force = 5.75 × 10–3 n,

q₂ has a charge of 42.0 μc

v₂ is the velocity of 1.21 × 103 m/s.

[tex]\rm F_{B2}[/tex]   is the magnitude of the magnetic force exerted on particle 2=?

The megnetic force for case 1 is found as;

[tex]\rm F_{B1}= qvB SIN \alpha_1 \\\\ 5.75 \times 10^{-3} =2.7 \times 10^{-6}\times 773 \times B sin 90^0 \\\\ B=\frac{5.75 \times 10^{-3}}{2.7 \times 10^{-6} \timesd 773 \times sin 90^0} \\\\ B=2.8 \ T[/tex]

The megnetic force for case 2 is found as;

[tex]\rm F_{B2} = q_2v_2bsin \alpha_2 \\\\ 42\times 10^{-6} \times 1.21 \times 10^3 \times 2.8 \times sin 55^0 \\\\ F_{B2}=0.12 T[/tex]

Hence the value of the megnetic force exerted on particle 2 will be 0.00122 T.

To learn more about the magnetic field refer to the link;

https://brainly.com/question/19542022

Answer:

last one and second one

Explanation:

Particle q1 has a charge of 2.7 μC and a velocity of 773 m/s. If it experiences a magnetic force of 5.75 × 10–3 N, what is the strength of the magnetic field?

2.8

T

In the same magnetic field, particle q2 has a charge of 42.0 μC and a velocity of 1.21 × 103 m/s. What is the magnitude of the magnetic force exerted on particle 2?

0.12

N

Answer:

200 billion to 400 billion stars in a typical spiral

Explanation:

hope this helps

have an awesome day -TJ

Answer:

1.36 meters

Explanation:

we just plug in the values into the formula given in the question

3.4/2.5 = answer

answer is 1.36

The current required in the windings of the given long solenoid that has 1580 turns uniformly distributed over the length of the solenoid is 1.98 A.

The magnetic field at the center of a solenoid is given by the following formula,

B = μ₀nI

where;

I = B/μ₀n

I = (0.00394) / (4π x 10⁻⁷ x 1580)

I = 1.98 A

Thus, the current required in the windings of the given long solenoid is 1.98 A.

Learn more about current in solenoid here: https://brainly.com/question/17086348

The voltage as a function of time for the power source oscillating at the given frequency is determined as V = 169.7sin(120πt).

The peak voltage of the source is calculated as follows;

Vrms = 0.7071V₀

120 = 0.7071V₀

V₀ = 120/0.7071

V₀ = 169.7 V

ω = 2πf

where;

f is frequency = 60 Hz

ω = 2π x 60

ω = 120π rad/s

V = V₀sin(ωt)

V = 169.7sin(120πt)

Learn more about peak voltage here: https://brainly.com/question/6249123

The voltage equation is a function of a time is V = 169.7sin(120πt) if the 1. 5-kω resistor and 27. 7-mh inductors are connected in series to a vrms = 120 v ac power source oscillating at a frequency of f = 60 Hz.

Electromagnetic induction causes the induced voltage. Electromagnetic induction is the process of creating emf (induced voltage) by exposing a conductor to a magnetic field.

We have:

[tex]\rm V{rms} = 120[/tex]

We know:

[tex]\rm V_{rms} = 0.7071V_o[/tex]

[tex]\rm 120 = 0.7071V_o[/tex]

[tex]\rm V_o = 169.70[/tex] Volts

Expression for the angular frequency is given by:

ω = 2πf

Where f is frequency

ω = 2π x 60  

ω = 120π rad/s

Voltage equation as a function of time is given by:

V = V₀sin(ωt)

V = 169.7sin(120πt)

Thus, the voltage equation is a function of a time is V = 169.7sin(120πt) if the 1. 5-kω resistor and 27. 7-mh inductors are connected in series to a vrms = 120 v ac power source oscillating at a frequency of f = 60 Hz.

Learn more about the induced voltage here:

brainly.com/question/19482771

#SPJ4

she is k bads boy (into negative)

For a Rectangular plate has a voltage of +180V and a 'voltage of -5V. , the second plate has the Electric field mathematically given as

E=21.5*10^3v/m

Generally, the equation for the Electric field   is mathematically given as

E=v/d

Where

v={180-(-5)}v

v=185v

Therefore

E=185/8.6*10^{-3}

E=21.5*10^3v/m

In conclusion, Electric field

E=21.5*10^3v/m

Read more about electric field

https://brainly.com/question/9383604

Answer:

40 kg

Explanation:

F = ma

F / a = m

2400 / 60  = 40 kg

Answer:

The continents will be in different positions because tectonic plate boundaries are always moving.

Answer:

42.5J (If g = 10)

41.6925J (If g = 9.81)

41.67975J (If g = 9.807)

Explanation:

Gravitational Potential Energy = Mass X Height X Gravitaitonal Field

Earth's Gravity is = 9.807 m/s^2

It is often rounded to 9.81 or 10

Answer: hey here's your answer...

Explanation: We can think of a force as a push on a surface, such as the force due to gravity you exert when standing on a bathroom scale. Pressure involves the distribution of force. The scale measures force, not pressure, so your weight reading is the same no matter how you distribute your weight on the scale.

Hope this helps...

Have a nice day-

One of the most crucial devices for electronics and communication is the signal generator. For several reasons, including testing, debugging, and designing, it is utilized to produce various types of signals and frequencies.

Engineers create electronic signals using signal generators, which can be analogue or digital, to test circuit designs. Signal generators come in a wide variety of forms with various characteristics and uses. The most typical signal generator kinds and their distinctive qualities are listed below.

Therefore, radar level instruments operate on the principle of generating a signal and then measuring the time required for the signal to reflect off the process fluid back to the transmitter.

Learn more about instruments here:

https://brainly.com/question/29608809

#SPJ2

By the work-energy theorem, the block's kinetic energy is increased by 15 J. The only force performing work on the block is the constant 5.0-N push.

Answer:

B

A

A

B

Explanation:

In the wiring of houses, a parallel circuit is used, otherwise, if the circuit of one of the parts is interrupted, the current will not enter the other circuits.

Glass is known to be a good insulator because atoms in glass hold on tightly to their positively charged particles.

Insulators are those substances that do not conduct heat or electricity like their conductor counterparts.

Conduction of electric charges is as a result of the free flow of electrons in the atom of the substance.

Hence, a good insulator holds on tightly to its electrons and prevent them from flowing freely to conduct electric charges.

Therefore, Glass is known to be a good insulator because atoms in glass hold on tightly to their positively charged particles.

Learn more about insulators at: https://brainly.com/question/24909989

It's the first answer, The atoms in glass hold on tightly to their positively charged particles.

- CONNECTIONS
---

much love <3

Answer:

we'll use the electric field formula. ı wrote the formula in the photo.

Explanation:

The electric field formula is obtained by multiplying force and charge. When you apply this process I mentioned, you will find an electric field. then it is to write the given values and find the result. achievements.

At the distance for which the electric field produced by a charge of -15 μc have a magnitude equal to 8. 7×104n/c is 3.93 meters.

Electric force is the force of attraction of repulsion between two bodies.

According to the Coulombs law, the force of attraction of repulsion between charged two bodies is directly proportional to the product of charges of them and inversely proportional to the square of distance between them.

It can be given as,

[tex]F=k\dfrac{Q}{r^2}[/tex]

Here, (k) is the coulombs constant,  (Q) is the charges and (r) is the distance between the two charges.

The charge of -15 μc have a magnitude equal to 8. 7×104n/c. Put this value in the above formula,

[tex]8.7\times10^4=(8.98\times10^{9})\dfrac{15\times10^{-6}}{r^2}\\r=3.93\rm\; m[/tex]

Thus, at the distance for which the electric field produced by a charge of -15 μc have a magnitude equal to 8. 7×104n/c is 3.93 meters.

Learn more about the electric force here;

https://brainly.com/question/14372859

#SPJ4

Answer:

Aeroplane

Explanation:

they have tail surfaces to stabilize the wings

Answer:

Static electricity

Explanation:

A static reaction is transpiring with the surrounding air as well as her hair.

Answer: It would be; A/B

Answer:

Electric Charge is the property associated with matter due to which it produces and experiences electric and magnetic effect

A brown dwarf is a starlike body that do do not have enough mass to ignite hydrogen fusion in their centers.

Brown dwarf refer to a body of substellar that is not huge or big enough to undergo nuclear fusion of o hydrogen into helium in their cores. This formed when there is contraction of gases in the intercellar spaces. The have a mass between 13 to 80 times that of Jupiter.

Therefore, brown dwarf is a starlike body that do don't not have enough mass to ignite hydrogen fusion in their centers.

Learn more about brown dwarf below.

https://brainly.com/question/15722167

Answer:

apple fall on his head, then he discovers gravity. Law of motion

Explanation:

Answer:

gravity is the theory of Newton.

Explanation:

The reason for this is because one day he was sitting under the apple tree and an apple fell on top of his head. So he wanted to figure out what had caused the apple to fall on his head.

Explanation:

When a magnetic body is buried inside the earth in North-South direction, it gets magnetized due to the effect of terrestrial magnetism. A freely suspended magnet faces North-South direction.

Answer:

a) 1500 j

b) 3000 j

c) 34.64 m/s

Explanation:

at halfway point 1/2 of the potential energy has been converted to kinetic energy

so 1 /2 P E =  1500 j

   it will still have the OTHER half of its PE     1500 j

c) PE will be entirely converted to KE when it is at the bottom

       KE = 1/2 m v^2

       3000 = 1/2 (5)(v^2)     show   v = 34.64 m/s

Answer:

Yes. To maintain constant total energy, when released from rest the charge loses potential energy as it gains kinetic energy in its "fall" toward the negative plate.

Explanation:

Answer:

Yes. Left. To maintain constant total energy, when released from rest the charge loses potential energy as it gains kinetic energy in its "fall" toward the negative plate.