Concrete is forced into all parts of its form through a process called?

The frequency to use depends on the range and distance of signal transmission. There is government communication agency in charge of issuing license in order to get carrier frequency in which the application can work with.

UHF means Ultra - high frequencies which is mostly used in television broadcasting and mobile phone. Frequency range of the UHF is between 300MHz to 3GHz.

Assuming that you have a wireless application you would like to design, build and sell as a commercial product. And you have selected a target frequency in the UHF range.

Most wireless applications make use of radio wave and microwave depending on the range of distance in which the signal will travel.

Bandwidth = 2[tex]F_{s}[/tex]

Where [tex]F_{s}[/tex] = sidebands frequency

The bullet points above highlighted how  you can decide what frequency to use and how would you get permission to use it

Learn more here:  https://brainly.com/question/24793150

Answer:

TRUE

Explanation:

Heat energy is the known to be a product of the movement of tiny particles called atoms, molecules or ions. The true statement is by Technician A.

Internal combustion engine is dependent on the heat of combustion so as to make torque to move the vehicle and power the system.

A lot of heat made during combustion is not often used productively and therefore need to be removed to avoid overheating of the engine.

The heat energy that is not used for is wasted in three ways: They are:

Learn more from

https://brainly.com/question/14566159

Answer:

We use Eq 9−67 and 9−68 to find the velocities of the particles after their first collision (at x=0 and t=0 )

ν

1f

​

−

m

1

​

+m

2

​

m

1

​

+m

2

​

​

ν

1i

​

=

0.30kg+0.40kg

0.30kg−0.40kg

​

(2.0m/s)=−0.29m/s

ν

2f

​

=

m

1

​

+m

2

​

2m

1

​

​

ν

1i

​

=

0.30kg+0.40kg

2(0.30kg)

​

(2.0m/s)=1.7m/s .

At a rate of motion of 1.7m/s,2x

w

​

=140cm (the distance to the wall and back to x=0 ) will be traversed by particle 2 in 0.82s . At t=0.82s , particle 1 is located at

x=(−2/7)(0.82)=−23cm ,

and particle 2 is " gaining " at a rate of (10/7)m/s leftward ; this is their relative velocity at that time . Thus , this "gap" of 23cm between them will be closed after an additional time of (0.23m)/(10/7m/s)=0.16s has passed . At this time (t=0.82+0.16=0.98s) the two particles are at x=(−2/7)(0.98)=−28cm

Explanation:

Answer:

forced convection

Explanation:

When a fan, pump or suction device is used to facilitate convection, the result is forced convection. Everyday examples of this can be seen with air conditioning, central heating, a car radiator using fluid, or a convection oven.

Answer:

What is a dashboard?

A dashboard is an information management tool used to track KPIs, metrics, and key data points that are relevant to your business, department, or a specific process. Dashboards aggregate and visualize data from multiple sources, such as databases, locally hosted files, and web services. Dashboards allow you to monitor your business performance by displaying historical trends, actionable data, and real-time information.

Dashboards actually take their name from automobile dashboards and they are used in much the same way. For the sake of an analogy, let’s look at a car. There may be hundreds of processes that impact the performance of your vehicle if you look under the hood. Your car’s dashboard summarizes this using visualizations so you can focus on what matters most: safely driving your vehicle.

For businesses, there are hundreds of processes that impact your performance if you look ‘under the hood’, so to speak. And with a wealth of data made available these days, managing and extracting value from it can be difficult. Simplifying data analysis and distribution through tools like dashboards is a way to help businesses rev their engines and make smarter, better, faster data-driven decisions.

And a well designed dashboard levels up your approach to information management. Everyone in the business, regardless of role, has questions about your company performance, whether it be campaign performance, new wins, or churn rate. Dashboards bring everyone (and your metrics) together in one place to answer these questions.

Explanation:

Answer:

A scale model is a representation or copy of an object that is larger or smaller than the actual size of the object being represented. Very often the scale model is smaller than the original and used as a guide to making the object in full size.

Explanation:

Answer:

C.) It maintains correct spatial relations

Explanation:

Ong that's the answer

Answer:

A French drain, or curtain drain, removes excess surface water so you won't need hip boots to cut the grass. A French drain, sometimes called a curtain drain, is a simple system with no moving parts -- gravity removes excess water from problem areas in your yard.

Answer:

Agricultural engineers attempt to solve agricultural problems concerning power supplies, the efficiency of machinery, the use of structures and facilities, pollution and environmental issues, and the storage and processing of agricultural products.

https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/

Answer:

C

Explanation:

As horsepower is the rate  at which that force torque  is a twisting or turning force, horsepower is produced. Hence option  C is correct.

Horsepower is defined as a unit used to describe the pace at which labor is done or to quantify power, frequently in relation to the output of engines or motors. Standardization and types of horsepower vary widely. A car's engine power is measured in horsepower (hp); the greater the number, the more power is transferred to the wheels and, in theory, the faster it will travel.

To put it simply, horsepower is your overall speed and power, whereas torque allows you to feel the sensation of acceleration when you put your foot down. When you realize that horsepower is derived from torque, this makes sense. Torque is a unit of rotational or twisting force. The power an engine produces is referred to as horsepower.

Thus, as horsepower is the rate  at which that force torque  is a twisting or turning force, horsepower is produced. Hence option  C is correct.  

To learn more about horsepower, refer to the link below:

https://brainly.com/question/12260337

#SPJ2

Answer:

blah blah blah sh ut up read learn

Answer: okiiiii

Explanation:

Answer:

The voltage to be measured is applied between the two spheres and the distance or spacing S between them gives a measure of the sparkover voltage. ... In the case of a.c. peak value and d.c. voltage measurements, the applied voltage is uniformly increased until sparkover occurs in the gap.

Answer:

D.  sitting and waiting for inspiration.

Explanation: Seems less reliable then then others

Answer:

wala naman pong pic po wala kahit walang pic magan da parin

Answer:

protect the employee once the hazard into contact with them.

The net charge on the said dielectric is 0

1C = 6.25 * 10¹⁸ electrons; hence:

-12.5x10¹⁸ free electrons = (-12.5x10¹⁸ free electrons * (1C/ 6.25 * 10¹⁸ electrons))

-12.5x10¹⁸ free electrons = -2 C

A positively charged electric has a charge of 2 Coulombs, hence:

Q₁ = 2C

12.5x10¹⁸ free electrons are added to it, hence:

Q₂ = -2C

[tex]Net\ charge(Q_{net})=Q_1+Q_2=2C+(-2C)=0[/tex]

Hence the net charge on the said dielectric is 0

Find out more at: https://brainly.com/question/10464929

Answer:

By ads online video (sorry if this doesn't help

Answer:

Through science and technology, we have solved many of humanity's problems, including hunger (at least in the Western world) with farming technologies and curing diseases through medical technologies. Inventions such as dishwashers, washing machines, and artificial lights have saved us immense amounts of time.

Explanation:

Science can not solve all of our problems. While scientific understanding can help battle things like disease, hunger, and poverty when applied properly, it does not do so completely and automatically. Furthermore, there are many areas of life where science can have little impact.

Answer:

What is this exactly?

Explanation:

If your asking for the definition, binary classification is the task of classifying the elements of a set into two groups on the basis of a classification rule.

Answer:

Wrought iron is an iron alloy with very low carbon content with respect to cast iron.

Explanation:

It is soft, ductile, magnetic, and has high elasticity and tensile strength. It can be heated and reheated and worked into various shapes.

Answer:

Wrought iron is an ferrous metal with a very low amount of carbon (less than 0.08%) compared to cast iron (2% or more). It is a semi-molten mass of iron with a fibrous sheath (up to 2% by weight), giving it a "grain" similar to wood grain, visible when bent or bent to the point of fracture. Wrought iron, malleable, easy to draw, corrosion resistant and easy to weld. Explanation:

Answer:

The variable head permeability test is one of various methods for determining soil permeability. It is used to determine the permeability of relatively new soil. Permeability refers to a soil's ability to enable water to pass through its pores or spaces.

Explanation:

Answer:

D

Explanation:

Answer:

A dibber or dibble or dibbler

Explanation:

A dibber or dibble or dibbler is a pointed wooden stick for making holes in the ground so that seeds, seedlings or small bulbs can be planted. Dibbers come in a variety of designs including the straight dibber, T-handled dibber, trowel dibber, and L-shaped dibber

Explanation:

The point on the line 3x + 4y = 5, which is equidistant from (1, 2) and (3, 4) is. Therefore, the point is (15, -10).