The answer is true, yw.
Coniferous forests grow in a wide range of climates, from the coldest polar regions to the warmest tropical regions and everything in between. This statement is true.
What are conifers ?Conifers are a type of gymnosperm plants bearing cone like structures in which the seeds are located. Don't be fooled by the fact that coniferous woods are widespread around the world. Some of the wildest trees in the world can be found there.
Hyperion, a coastal redwood tree, is the tallest tree in the world, reaching a height of 379 feet, equivalent to a 35-story structure. From Siberia to Canada, coniferous rainforest biomes can be found. They have cold winters and warm to hot summers.
Temperatures in coniferous forests are quite low all year long. Summertime temperatures range from -7°C to 21°C, while the average wintertime temperature ranges from -54°C to -1°C. Hence, the statement is true.
Find more on conifers:
https://brainly.com/question/30415885
#SPJ6
some plz help me make mnemonic to helpme remember the oder of the planets
Answer:
My - Mercury
Very- Venus
Excited- Earth
Mother- Mars
Just- Jupiter
Served- Saturn
Us- Uranus
Nachos- Neptune
Explanation:
Mark me Brainliest?
Answer:
My very encouraging made just us nachos
Explanation:
My stands for Mercury
Very stands for venus
Encouraging- Earth
made- Mars
just- Jupiter
Us- Uranus
Nachos- Neptune
Which of the following changes will lead to an increase in the rate of dissolving.
a. increasing the surface area of the solute
b. stirring the solution
c. increasing the temperature of the solution
d. All of the above
7. Cells often store materials like water, salts, proteins and carbohydrates in sac-like structures called A. Chloroplasts. B. Lysosomes. C. Mitochondria. D. Vacuoles.
Answer:
A
Explanation:
the chloroplast holds the water , nutrients
Answer:
[tex]\boxed {\boxed {\sf D. \ Vacuoles}}[/tex]
Explanation:
First, let's examine each answer choice.
A. Chloroplasts
These structures are only found in plant cells. They are the site of photosynthesis: the process that turns water, carbon dioxide, and light energy into glucose and oxygen.B. Lysosomes
These help remove and break down cellular waste. They contain special enzymes that allow them to digest certain molecules, bacteria, and old parts of the cell.C. Mitochondria
These are famously known as the powerhouse of the cell. They create energy from glucose and oxygen in a process called cellular respiration.D. Vacuoles
Vacuoles are sacs that store substances, including water, nutrients, and waste.Since the question asks us to pick the sac-like structures that store materials in cells, choice D: vacuoles is correct.
If you put 100g of NaOH in cube form and 200g of NaOH in powered form which will react with HCl at a faster rate? Explain why
Answer:
200g of NaOH in powered form will react with HCl at a faster rate
Explanation:
200g of NaOH in powered form will react with HCl at a faster rate because it is in powdered form and it will have high surface area to volume ration and hence high reactivity and rate of reaction as compared to the cube NaOH.
Which of these is a learned behavior of a dog?
1.Begging for food
2.Drinking water
3.Panting on a hot day
4.Chewing on a bone
How do you name branched-chain alkanes?
Answer:
Explanation:
Branches or side chains are called alkyl radicals, they are named substituting the termination -ano for -yl or -il when it is part of a hydrocarbon.
bismuth (V) nitrate + strontium hydroxide
Answer: [tex]2Bi(NO_3)_5(aq)+5Sr(OH)_2(aq)\rightarrow 2Bi(OH)_5(s)+5Sr(NO_3)_2(aq)[/tex]
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.
The balanced chemical equation is:
[tex]2Bi(NO_3)_5(aq)+5Sr(OH)_2(aq)\rightarrow 2Bi(OH)_5(s)+5Sr(NO_3)_2(aq)[/tex]
Can someone please help me with my chemistry hw
Answer:
a) 18
b)288g
Explanation:
a) 1:4
4.5mol TiCl4 so HCl is 4(4.5mol)
b) mm of HCl is 36
because 1:4 we multiply 2.0 mol by 4
8mol of HCl
we multiply 8mol by 36 (molar mass of HCl) and we get 288g because mol×molar mass= grams
Given this balanced equation: CS2 + 3 O2 CO2 + 2 SO2
Calculate how many moles of SO2 can be produced with when given 4 moles of CS2.
58.67 g
Now calculate how many moles of SO2 can be produced with when given 4 moles of O2.
Which one is the limiting reactant (4 moles CS2 or 4 moles of O2)? How do you know?
Answer: The FitnessGram PACER Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The test is used to measure a student's aerobic capacity as part of the FitnessGram assessment. Students run back and forth as many times as they can, each lap signaled by a beep sound.
Explanation:
In an ideal gas, entropy is a measure of the
Answer:
Entropy is a measure of the degree of spreading and sharing of thermal energy within a system. For an ideal gas that expands at a constant temperature (meaning that it absorbs heat from the surroundings to compensate for the work it does during the expansion), the increase in entropy is given by ΔS= R1n (V2/V1)
Explanation:
hope this helps!
2 Al + 3 Br2 --> 2 AlBr3
If 15.0 grams of AlBr3 are produced, how many grams of aluminum are needed?
Round your answer to two decimals.
Please i need this asap
Since AlBr3 is the sole product, we can use its coefficient to determine its molar ratio with Al. Conveniently, that ratio is 2:2 or, simplified, 1:1, which means that the number of moles of AlBr3 produced is equivalent to the number of moles of aluminum consumed in the reaction.
We must determine the number of moles of AlBr3 produced; we are given the mass of AlBr3 produced, so we divide the mass by the molar mass of AlBr3:
(15.0 g)/(266.694 g/mol) = 0.05624 mol AlBr3
Since the molar ratio of AlBr3:Al is 1:1, that means 0.05624 moles of Al were reacted. Now, all that is left is to convert the number of moles of Al to grams. We multiply the number of moles by the molar mass of Al:
(0.05624 mol)(26.982 g/mol) = 1.52 grams Al.
So, if 15.0 grams of AlBr3 are produced in this reaction, 1.52 grams of Al are needed.
If the prescribed dosage of milk of magnesia Mg(OH)2 is 3.5 moles, how many grams
would you need to take? Round to the nearest tenth (one digit after the decimal).
A. 92.1 g
B. 204.2g
C. 157.2 g
D. None of the above
Answer:
B
Explanation:
1 mole is equal to 58.31968 grams.
so 3.5 moles equal to answer choice B
What are the three ways there can be a base change in a sequence?
Answer:
substitutions, deletions and insertions
whoever helps me will get brainlist
Answer:
Show us the arrows, how are we suppose to answer?
Explanation:
I NEED THIS ASAP
A truck was carrying a substance in a tank. The molecules of that substance were moving away from each other. The truck parked overnight in a place where energy transferred out of the substance. In the morning, the substance was a gas. How were the molecules moving in the morning? Explain why the molecules were moving that way after energy was transferred out of them.
Answer:
1. In the morning the molecules were moving away from each other with a smaller speed than when the truck was carrying the substance.
2. The reason is that the molecules contain less average kinetic energy, thus their average speed is lower.
Explanation:
Our model of the state (phases) of the substances describes the molecules of solids as not moving away from each other, they are relatively fixed with respect to each other, just vibrating; the molecules of liquids as free to slide pass each other, which permits they to flow, but not moving away from each other; and the the molecules of the gases as moving away from each other, which is the cause of them occupying the whole space of the container that holds them.
According to that, the substance that the truck was carryng was a gas, because the molecules were moving away from each other.
After parking overnight, where energy transferred out of the substance, in the morning, the substance was a gas. Hence, the molecules were moving away from each other too. This answer the first question.
Since energy was transferred out of the substance, in the morning the temperature of the substance decreased (but no enough to make it a liquid). The average kinetic energy of the gases depends only on the temperature. So, the average kinetic energy of the molecules in the morning was smaller than when the truck was carrying the substance. Since the kinetic energy is proportional to the square of the speed of the molecules, the smaller average kinetic energy means that the average speed of the molecules was smaller too. Hence, in the morning the molecules were moving away from each other with a lower speed than when the truck was carrying the substance.
Average kinetic energy is the average sum of all kinetic energy of all the molecules of gases. Therefore, molecules will move at a lesser speed as average kinetic energy will become small.
What is kinetic energy?It is a energy which is possess by a moving object. It is very difficult to find the correct value of kinetic energy so we find average kinetic energy. Which is very easy to calculate as compared to calculating kinetic energy. It is not dependent on the type of gases or mass of gases.
Mathematically, the formula for kinetic energy can be given as
K.E=1/2mv²
Where,
m= mass of object
v= velocity of object
Molecules will move at a lesser speed as average kinetic energy will become small.
Therefore, molecules will move at a lesser speed as average kinetic energy will become small.
Learn more about the average kinetic energy, here:
https://brainly.com/question/22174271
#SPJ2
The following is an example of which type of boundary?
A subduction zone
B convergent boundary
C divergent boundary
D transform boundary. . also pls no links or random answes
TRUE OR FALSE
All of the elements on Earth, except for hydrogen, were formed in the interiors of stars.
Answer:
True
Explanation:
I checked several websites to double check for you.
Answer:
Except for hydrogen and some helium created in the Big Bang, all of the stuff we, and the Earth around us, are made of, was generated in stars, through sustained fusion or in supernova explosions i thank its true :) hope this helps
6. Soap contains 76.5% C, 11.3% O, and 12.2% H and the MW = 847, what is the
molecular formula?
Answer:
the molecular formula of the soap is C₅₄H₁₀₂O₆
Explanation:
Given;
composition of carbon, C = 76.5%
composition of oxygen, O = 11.3%
Composition of hydrogen, H = 12.2%
The empirical formula is calculated as follows;
C: 76.5% / 12 O: 11.3% / 16 H: 12.2% / 1
= 6.375 = 0.706 = 12.2
Divide through by the least number (0.706);
= 6.375/0.706 = 0.706 / 0.706 = 12.2 / 0.706
= 9 = 1 = 17
The empirical formula = C₉H₁₇O
The molecular formula is calculated as follows;
(C₉H₁₇O)n = 847
(9 x 12 + 17 x 1 + 16 x 1)n = 847
(108 + 17 + 16)n = 847
141n = 847
n = 847/141
n = 6
The molecular is (C₉H₁₇O)6 = C₅₄H₁₀₂O₆
Therefore, the molecular formula of the soap is C₅₄H₁₀₂O₆
Si tenemos una solución de ácido láctico 0.025M con un pH = 2.75. ¿Cuál es la constante de equilibrio Ka?
Answer:
La constante de equilibrio Ka del ácido láctico es 1.38x10⁻⁴.
Explanation:
El ácido láctico es un ácido débil cuya reacción de disociación es la siguiente:
CH₃CHOHCOOH + H₂O ⇄ CH₃CHOHCOO⁻ + H₃O⁺ (1)
0.025M - x x x
La constante de acidez del ácido es:
[tex] Ka = \frac{[CH_{3}CHOHCOOH^{-}][H_{3}O^{+}]}{[CH_{3}CHOHCOOH]} [/tex]
Sabemos que la concentración del ácido inicial es:
[CH₃CHOHCOOH] = 0.025 M
Y que a partir del pH podemos hallar [H₃O⁺]:
[tex] pH = -log[H_{3}O^{+}] [/tex]
[tex] [H_{3}O^{+}] = 10^{-pH} = 10^{-2.75} = 1.78 \cdo 10^{-3} M [/tex]
Debido a que el ácido se disocia en agua para producir los iones CH₃CHOHCOO⁻ y H₃O⁺ de igual manera (según la reacción (1)), tenemos:
[CH₃CHOHCOO⁻] = [H₃O⁺] = 1.78x10⁻³ M
Y por esa misma disociación, la concentración del ácido en el equilibrio es:
[tex] [CH_{3}CHOHCOOH^{-}] = 0.025 M - 1.78 \cdo 10^{-3} M = 0.023 M [/tex]
Entonces, la constante de equilibrio Ka del ácido láctico es:
[tex] Ka = \frac{[CH_{3}CHOHCOOH^{-}][H_{3}O^{+}]}{[CH_{3}CHOHCOOH]} = \frac{(1.78 \cdo 10^{-3})^{2}}{0.023} = 1.38 \cdot 10^{-4} [/tex]
Espero que te sea de utilidad!
How many formula units are in 2.0 moles of Fe(NO3)2?
Answer:
1.2 x 10>24 (2.0)(6.022 x 10>23)
Explanation:
How many formula units are in 2.0 moles of Fe(NO3)2?
Mole measure the number of elementary entities of a given substance that are present in a given sample. 12.044×10²³ formula units are in 2 moles of Fe(NO₃)₂.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number. Mole is inversely proportional to molar mass.
Mathematically,
Mole of Fe(NO₃)₂. =given number of atoms of Fe(NO₃)₂.÷ 6.022×10²³(Avogadro number)
mole of Fe(NO₃)₂= 2moles
Substituting the values
2=number of atoms of Fe(NO₃)₂.÷ 6.022×10²³
Number of atoms of Fe(NO₃)₂.=2×6.022×10²³
Number of atoms of Fe(NO₃)₂.=12.044×10²³
Therefore, 12.044×10²³ formula units are in 2 moles of Fe(NO₃)₂.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ3
I know the answer out here are points for you! It’s 3 if anyone needs the answer !
Answer:
lol thanks for the 10
Explanation:
plssss show your work will mark the brainliest
Answer:
135.16 mL
Explanation:
From the question,
Applying,
PV/T = P'V'/T'.................... Equation 1
Where P = Initial pressure of the gas, V = Initial volume of the gas, T = Initial Temperature of the gas in Kelvin, P' = Final pressure of the gas, V' = Final Volume of the gas, T' = Final temperature of the gas in Kelvin.
Make V' the subject of the equation
V' = PVT'/TP'................... Equation 2
Given: P = 600 torr, V = 115 mL, T = 50 °C = (50+273) K = 323 K, T' = 75 °C = (75+273) K = 348 K, P' = 550 torr
Substitute these values into equation 2
V' = (600×115×348)/(323×550)
V' = 24012000/117650
V' = 135.16 mL
Show work for all math problems. Make sure to have the correct unit and significant figures in your each answer.
Convert 2.35 atm to mmHg.
PLEASE ME!!!! ANSWER IF YOU KNOW THE ANSWER
Answer:
organism 1
Explanation:
the arrow points away from it so that means that it is being eaten and it always starts from a producer so organism 1 is likely a producer :)
Nitric acid+ calcium oxide gives what
Answer:
HNO3 + Ca(OH)2 ====> H2O + Ca(NO3)2
it gives water and Calcium nitrate
Hope to helpfull.
Answer:
HNO3 + Ca(OH)2 ====> H2O + Ca(NO3)2
A 220.0 mL sample of helium gas is in a cylinder with a movable piston at 105 kPa and 275 K. The piston is
pushed in until the sample has a volume of 95.0 mL. The new temperature of the gas is 310 K. What is the new
pressure of the sample?
274 kPa
216 kPa
Piston
243 kPa
51.1 kPa
Answer:
Explanation:
what did you get?
How does temperature affect the spontaneity of a reaction?
A. Increasing the temperature always makes a reaction less likely to
be spontaneous
B. Increasing the temperature will not affect the spontaneity of a
reaction.
C. Increasing the temperature always makes a reaction more likely to
be spontaneous.
D. Increasing the temperature makes a reaction spontaneous in
some situations.
Answer:
D
Explanation:
took the test
The statement 'increasing the temperature makes a reaction spontaneous in some situations' indicates how temperature affects the spontaneity of a reaction.
What is a chemical reaction?A chemical reaction is a given process in which one or more reactants are converted into different products.
A chemical reaction is composed of catalysts such as enzymes that speed up its velocity.Temperature represents a fundamental variable in a chemical reaction.In conclusion, the statement 'increasing the temperature makes a reaction spontaneous in some situations' indicates how temperature affects the spontaneity of a reaction.
Learn more in:
https://brainly.com/question/1156488
HELP PLS THANK YA!!!
Answer:
there is the answers. hope this helps
yield for this reaction?
Reaction: N2(g) + 3 H2(g) → 2 NH3 (g)
Answer:
Yes, yield.
Explanation:
N2(g) + 3 H2(g) → 2 NH3 (g) balanced equation
First, find limiting reactant:
Moles H2 = 1.83 g x 1 mole/2 g = 0.915 moles H2
Moles N2 = 9.84 g N2 x 1 mole/28 g = 0.351 moles N2
The mole ratio of H2: N2 is 3:1, so H2 is limiting (0.915 is less than 3 x 0.351)
Theoretical yield of NH3 = 0.915 mol H2 x 2 mol NH3/3 mol H2 = 0.61 moles NH3
10 How does no-till farming help the environment?
A It decreases soil erosion.
C It increases fertilizer use.
B It increases soil removal.
D It decreases crop yield.
Answer: Answer is A it will decrease soil erosion
Explanation:it just will trust me
Answer:
A.
Explanation:
the soil will not loosen when u till it