consider straight wires of equal lengths with their ends soldered together to form the edges of a cube. either silver or copper wire can be used for each edge. how many different ways can the cube be constructed?

We can conclude that 7/3 lies between the integers 2 and 3. So, correct option is C,

To determine between which two integers 7/3 lies, we can use division and rounding.

Dividing 7 by 3 gives 2 with a remainder of 1. Therefore, we can express 7/3 as the sum of 2 and a fraction:

7/3 = 2 + 1/3

Since the fraction 1/3 is less than 1/2, we can round down to 2. Therefore, we can conclude that 7/3 lies between the integers 2 and 3.

This question requires us to determine between which two integers the fraction 7/3 lies. One approach to solving this is to perform long division, which gives us a quotient of 2 with a remainder of 1. We can express 7/3 as the sum of the quotient and the fraction 1/3. Since 1/3 is less than 1/2, we round down to the nearest integer, which in this case is 2.

Answer C, 2 and 3, is the correct answer.

To learn more about integers click on,

https://brainly.com/question/12959472

#SPJ4

The experimental probability that Jenny will pull out an orange tile is option d.) fraction 26 over 50 or [tex]\frac{26}{50}[/tex].

Based on the results of an experiment or a real-world scenario, the experimental probability is a measurement of the chance that an event will take place. By dividing the number of positive outcomes (or the frequency of an event) by the entire number of possibilities that may occur, it is determined (or the total number of trials).

Given:

[tex]Color of Tile\quad\qquad | Purple | \; Pink | \; Orange\\Number of times drawn 6 | 18 | 26[/tex]

Given data indicates that an orange tile gets drawn [tex]26 \,times[/tex] total. Jenny goes through the procedure [tex]50\, times[/tex], thus there are [tex]50[/tex] drawings in all.

We divide the experimental chance of drawing an orange tile (26 times) by the total number of draws (50), to get Experimental Probability as:

The experimental Probability of drawing an orange tile =[tex]Number \,of times \,orange\, tile\, is \,drawn \,/ \,Total\, number \,of \,draws[/tex]= 26/50

Learn more about Experimental Probability here:

https://brainly.com/question/30694293

#SPJ1

Answer:

14

Step-by-step explanation:

c = 2[tex]\pi r[/tex]

c = 2[tex]\pi[/tex]7

x = 14[tex]\pi[/tex]

Helping in the name of Jesus.

The highway accident evidence to reject the null hypothesis that the population proportion is equal to 77%.

No, these data do not indicate that the population proportion of driver fatalities related to alcohol is less than 77% in Kit Carson County.

The sample proportion of 15 out of 27 is 56.25%, which is not significantly different from the population proportion of 77%.

The p value for this test is 0.788, which is greater than the alpha level of 0.01.

The p value of this test indicates that the sample proportion of 15 out of 27 (56.25%) is not significantly different from the population proportion of 77%.

This means that there is not enough evidence to reject the null hypothesis that the population proportion is equal to 77%.

The p value of 0.788 is greater than the alpha level of 0.01, meaning that the results of this test are not statistically significant enough to support the alternative hypothesis that the population proportion is less than 77%.

For similar question on population proportion:

https://brainly.com/question/29912751

#SPJ11

The length of the rectangular prism given the volume, width and height is 19 yd.

Volume of a rectangular prism = length × width × height

Volume of the prism = 2,280 yd³

Width of the prism = 20 yd

Height of the prism = 6 yd

Length of the prism = x

So,

Volume of a rectangular prism = length × width × height

2,280 = x × 20 × 6

2,280 = 120x

divide both sides by 120

x = 2,280 / 120

x = 19 yd

Therefore, the length is 19 yd

Read more on rectangular prism:

https://brainly.com/question/8839626

#SPJ1

The ratio of LM to FG is 3:4, so correct option is A.

A triangle is a polygon with three sides, three vertices, and three angles. It is one of the basic shapes in geometry and has many properties that make it a useful and interesting shape to study.

The sum of the interior angles of a triangle is always 180 degrees, which is a fundamental property of triangles.

Triangles also have many interesting properties related to their sides, angles, and areas. For example, the Pythagorean theorem states that in a right triangle, the sum of the squares of the lengths of the legs is equal to the square of the length of the hypotenuse. The area of a triangle can be calculated using the formula 1/2(base x height) or by using various trigonometric functions.

Triangles are important in many areas of mathematics and science, such as in geometry, trigonometry, calculus, and physics. They are also commonly used in architecture, engineering, and design.

If LMN and FGH are similar triangles, then the ratio of their areas is equal to the square of the ratio of their corresponding side lengths.

Let x be the ratio of LM to FG. Then the ratio of their areas is (x²).

So we have:

LMN / FGH = 18 / 32

(x²) = 18 / 32

x² = 9 / 16

x = (3 / 4)

Therefore, the ratio of LM to FG is 3:4, which is option A.

To know more about ratio visit:

https://brainly.com/question/21575

#SPJ9

0.5 is used as a conservative estimate of p in determining the minimum sample size for a proportion confidence interval to account for maximum uncertainty.

In statistical hypothesis testing and estimation, we often need to make inferences about population parameters based on a sample. One of the parameters of interest is the proportion of successes in a population.

When we construct a confidence interval for a proportion, we need to specify the desired level of confidence and the desired margin of error. The margin of error depends on the sample size and the standard error of the sample proportion.

The standard error of the sample proportion is estimated using the population proportion, p, which is unknown. Since we don't know the true value of p, we typically use the sample proportion, p-hat, as an estimate. However, using p-hat alone can lead to an overly optimistic estimate of the standard error and, therefore, an overly narrow confidence interval.

To account for this uncertainty, we use a conservative estimate of the standard error that assumes a worst-case scenario for p. The worst-case scenario is when p is 0.5, which corresponds to maximum uncertainty or variability in the estimate of the proportion. This is why 0.5 is often used as a conservative estimate of p when determining the minimum sample size necessary for a proportion confidence interval. By assuming p = 0.5, we ensure that our sample size is large enough to account for the worst-case scenario and provide a reliable estimate of the proportion.

Learn more about proportion confidence interval

brainly.com/question/13686615

#SPJ11

To determine if the sample fairly represents the population, we need to consider whether the sample is representative and whether there is any bias present in the sampling process.

If the principal surveyed fifty 8th graders in a way that ensures that each 8th grader in the population has an equal chance of being selected, then the sample can be considered representative. This means that the sample accurately reflects the characteristics of the population, and any conclusions drawn from the sample can be applied to the population.

However, if the sampling process was biased in some way, the sample may not be representative of the population. For example, if the principal only surveyed 8th graders in one class or in one particular group, the sample may not be representative of the entire 8th-grade population at Harding Middle School. In this case, any conclusions drawn from the sample may not accurately reflect the entire population.

Therefore, the key factor in determining whether the sample fairly represents the population is the sampling method used. If the sampling method is random and unbiased, then the sample can be considered representative of the population.

To know more about sampling process here

https://brainly.com/question/15023379

#SPJ4

A. The correct option for similarity is option D -  Both estimate proportions of the data contained within k standard deviations of the mean.

Both the Empirical Rule and Chebyshev's Theorem are used to estimate the proportion of data contained within a certain number of standard deviations from the mean.

Therefore, option 'D' is the correct answer: Both estimate proportions of the data contained within k standard deviations of the mean.

B. The correct option for difference is option A - The Empirical Rule assumes the distribution is aproximately symmetric and bell-shaped and Chebychev's Theorem makes no assumptions.

The Empirical Rule assumes that the distribution is approximately symmetric and bell-shaped, while Chebyshev's Theorem makes no assumptions about the shape of the distribution.

Another difference is that the Empirical Rule is only applicable for normal distributions, while Chebyshev's Theorem can be applied to any distribution.

Therefore, option 'A' is the correct answer: The Empirical Rule assumes the distribution is approximately symmetric and bell-shaped and Chebychev's Theorem makes no assumptions.

To know more about empirical Rule

https://brainly.com/question/30700783

#SPJ4

Step-by-step explanation:

yes,because of SAS side angle side are equal.

The total cups of milk orange juice Enrique has in refrigerator is equal to  18 cups.

Gallons of milk Enrique has in his refrigerator = 1 gallon

Pint of orange juice Enrique has in his refrigerator = 1 pint

Convert gallons to cups and pint to cups .

There are ,

16 cups = 1 gallon of milk

And 2 cups = 1 pint of orange juice

Enrique has 16 cups of milk

and 2 cups of orange juice.

Total cups of milk and orange juice in refrigerator

=16 cups of milk + 2 cups of orange juice

= 18 cups of milk and orange juice

Therefore, in total Enrique has  18 cups of liquid in his refrigerator.

Learn more about cups here

brainly.com/question/22334258

#SPJ4

The angle measures of the central angle GFE and the circumscribed angle GCE in circle C are 83° and 79° respectively.

Angle is a geometric term used to describe the measure between two lines or surfaces that intersect each other. It is measured in degrees, and is typically represented by the Greek letter θ (theta). Angles can be acute, obtuse, right, reflex, or straight. Acute angles are angles that are less than 90°, obtuse angles are angles that are greater than 90°, and right angles are angles that measure exactly 90°. Reflex angles are angles that measure greater than 180°, and straight angles measure exactly 180°.

The two correct answers are 83° and 79°. The angle measure of the central angle GFE is 3x + 11. Therefore, 3x + 11 = 83°, and x = 26. The angle measure of the circumscribed angle GCE is 5x - 23. Therefore, 5x - 23 = 79°, and x = 26. As both equations have the same value for x, the two angle measures are 83° and 79°.

In conclusion, the angle measures of the central angle GFE and the circumscribed angle GCE in circle C are 83° and 79° respectively.

To know more about angle click-
https://brainly.com/question/25716982
#SPJ1

If the house value of $89,548 and two points, attorney's fees $324, title fees $105, then closing cost is option (b) $2,219.96

Closing costs are fees associated with the purchase or refinance of a property that are paid at the closing of the transaction.

To calculate the closing cost, we need to add up all the fees associated with the purchase of the house.

First, we need to calculate the cost of the points. Two points on a house value of $89,548 would be

2 x $89,548 x 0.01 = $1,790.96

Next, we need to add the attorney's fees and title fees

$1,790.96 + $324 + $105 = $2,219.96

Therefore, the correct option is (b) $2,219.96

Learn more about Closing costs here

brainly.com/question/30280701

#SPJ4

Answer:

Table 4 represents a function because each x-value corresponds to exactly one y-value.

The minimum possible diameter of a soccer ball is 8.60 inches, and the maximum possible diameter is 8.70 inches.

What is equations?

Equivalent equations are algebraic equations that are having identical roots or solutions.

The soccer ball specifications require a diameter of 8.65 inches, with an allowable margin of error of 0.05 inch.

This means that the actual diameter of any new soccer ball should be within the range of 8.60 inches to 8.70 inches. The equation that can be used to find the diameter of a new soccer ball is d = 8.65 ± 0.05, where d represents the diameter. The symbol "±" indicates that the diameter can be either 0.05 inches larger or smaller than the specified diameter of 8.65 inches.

It is important to ensure that the diameter of a soccer ball falls within this allowable range to comply with the specifications and ensure fair play.

Therefore, The minimum possible diameter of a soccer ball is 8.60 inches, and the maximum possible diameter is 8.70 inches.

To know more about equations visit,

brainly.com/question/2972832

#SPJ1

The probability that the flight will leave on time when it is not raining is approximately 0.83.

What is probability?

Probability is a measure of the likelihood or chance of an event occurring. It is expressed as a number between 0 and 1, where 0 represents impossibility (the event will not occur) and 1 represents certainty (the event will definitely occur).

According to the given information:

To find the probability that the flight will leave on time when it is not raining, we need to subtract the probability of the flight being delayed due to rain from 1 (since the sum of all probabilities in a given event space is equal to 1).

Let:

P(rain) = 0.07 (probability of rain)

P(delayed) = 0.17 (probability of delay)

P(rain and delayed) = 0.02 (probability of rain and delay)

We can use the formula for conditional probability:

P(A|B) = P(A and B) / P(B)

In this case, we want to find P(on time | not raining), which can be expressed as:

P(on time | not raining) = P(on time and not raining) / P(not raining)

Since rain and not raining are mutually exclusive events (i.e., they cannot occur simultaneously), we have:

P(on time | not raining) = P(on time) / (1 - P(rain))

We can now substitute the given probabilities to calculate the required probability:

P(on time | not raining) = P(on time) / (1 - P(rain))

P(on time | not raining) = (1 - P(delayed)) / (1 - P(rain))

P(on time | not raining) = (1 - 0.17) / (1 - 0.07)

P(on time | not raining) = 0.83

So, the probability that the flight will leave on time when it is not raining is approximately 0.83 (rounded to the nearest thousandth).

To know more about probability visit: https://brainly.com/question/30034780

#SPJ1

Therefore, the dimensions of the crate that minimize the cost of materials are approximately:

l = 1.587 ft
w = 2.519 ft
h = 3.159 ft

To minimize the cost of materials, we need to find the dimensions of the crate that will minimize the surface area of the crate. Let's call the height, width, and length of the crate "h", "w", and "l", respectively.

We know that the volume of the crate is 16 ft3, so we can write:

lwh = 16

We want to minimize the cost of materials, which is determined by the surface area of the crate. The surface area consists of the top, bottom, front, back, left, and right sides of the crate. The cost of the materials for the base is twice the cost of the materials for the sides, and the cost of the materials for the top is half the cost of the materials for the sides. Let's call the cost of the materials for the sides "c".

The surface area of the crate can be written as:

2lw + 2lh + 2wh

We can use the volume equation to solve for one of the variables, say "h":

[tex]h = \frac{16}{(lw)}[/tex]

Now we can substitute this expression for "h" into the surface area equation:

[tex]2lw + 2l(\frac{16}{(lw))} + 2wh[/tex]

Simplifying this expression gives:

[tex]2lw + 32/l + 2wh[/tex]
To find the dimensions that minimize this expression, we need to take the partial derivatives with respect to "l" and "w" and set them equal to zero:
[tex]\frac{d}{dl} (2lw + 32/l + 2wh) = 2w - \frac{32}{l^2} = 0\\[/tex]

[tex]\frac{d}{dw} (2lw + 32/l + 2wh) = 2l + 2h = 2l + 2(16/(lw)) = 2l + 32/(lw) = 0[/tex]
Solving these equations for "l" and "w" gives:

[tex]l = 2^{(1/3)}\\w = 2^{(2/3)}[/tex]

Substituting these values into the equation for "h" gives:

[tex]h = 8/(2^{(2/3)})[/tex]

Therefore, the dimensions of the crate that minimize the cost of materials are approximately:

l = 1.587 ft
w = 2.519 ft
h = 3.159 ft

learn more about volume

https://brainly.com/question/28058531

#SPJ11

The dimensions of the box that minimize the cost of materials are approximate:

x ≈ 2.52 ft

y ≈ 3.55 ft

z ≈ 2.52 ft

Let's denote the length, width, and height of the box as x, y, and z,

respectively. We are given the volume of the box is [tex]16 ft^3[/tex], so we

have:

x × y × z = 16

We are also given that the material used to make the base costs twice as

much (per square foot) as the material in the sides.

Let's denote the cost of the material for the sides as c, so the cost of the

material for the base is 2c.

The area of the base is xy, so the cost of the material for the base is

2cxy.

Similarly, the material used to make the top costs half as much (per

square foot) as the material in the sides.

Let's denote the cost of the material for the top as 0.5c.

The area of the top is also xy, so the cost of the material for the top is 0.5cxy.

The cost of the material for the four sides is simply 4cz.

Therefore, the total cost of materials is:

C(x, y, z) = 2cxy + 4cz + 0.5cxy

Simplifying, we have:

C(x, y, z) = (2.5c)xy + 4cz

We want to minimize this function subject to the constraint that the volume of the box is [tex]16 ft^3[/tex]:

x × y × z = 16

We can use the method of Lagrange multipliers to solve this constrained optimization problem:

L(x, y, z, λ) = (2.5c)xy + 4cz - λ(xyz - 16)

Taking partial derivatives with respect to x, y, z, and λ, we get:

dL/dx = 2.5cy - λyz = 0

dL/dy = 2.5cx - λxz = 0

dL/dz = 4c - λxy = 0

dL/dλ = xyz - 16 = 0

From the first two equations, we can solve for λ:

λ = 2.5cy/yz = 2.5cx/xz

Setting these two expressions equal to each other and simplifying, we get:

y/x = z/y

This implies that x:y:z = 1:√2:1, since we know that the dimensions of the box must be in proportion to each other.

Substituting this into the constraint x × y × z = 16, we get:

x = 2∛2

y = 2∛4

z = 2∛2

for such more question on dimensions

https://brainly.com/question/28107004

#SPJ11

We have confirmed that the sum of the series is 28/3. Therefore, the correct answer is option (b) 28/3.

A geometric series is a series of numbers where each term is a fixed multiple of the preceding term. Specifically, a geometric series has the form:

a+ar+ar²+ar³+.....

The given series is a geometric series with first term (a) = 14 and common ratio (r) = -1/2.

Consider sum of series be S, So-

S = a/(1 - r) = 14/(1 - (-1/2)) = 28/3

To see why this is the correct answer, we can also write out the first few terms of the series:

14-7+7/2-7/4+7/8-.....

It is evident that each term is produced by multiplying the one before it by -1/2.

So, the second term is obtained by multiplying the first term by -1/2, the third term is obtained by multiplying the second term by -1/2, and so on.

We can also notice that the sum of the first two terms is 7, the sum of the first three terms is 21/2, and the sum of the first four terms is 28/3. This suggests that the sum of the first n terms of the series might be given by the formula Sn = a(1 - rⁿ)/(1 - r).

We can verify that this is true by using the formula to find the sum of the first four terms:

S4 = 14(1 - (-1/2)⁴)/(1 - (-1/2)) = 28/3

To know more about common ratio visit:

https://brainly.com/question/24989238

#SPJ1

The value of the expression 8w - 4j² when w = 0.25 and j = 0.5 is 1.

The expression 8w - 4j² is a combination of variables, w and j, and a constant, 8 and 4. In order to evaluate the expression when w = 0.25 and j = 0.5, we substitute these values for w and j in the expression and perform the necessary calculations.

First, we substitute w = 0.25 and j = 0.5 in the expression:

8(0.25) - 4(0.5)²

Next, we simplify the expression by performing the calculations in the parentheses first. Since 0.5² = 0.25, we can simplify 4(0.5)² to 4(0.25) = 1. We can then simplify 8(0.25) - 4(0.5)² to:

= 2 - 1

= 1

Learn more about expression here

brainly.com/question/12467722

#SPJ4

The given question is incomplete, the complete question is:

What is the value of the expression 8w−4j² when w=0. 25 and j=0. 5?

The first step in solving the equation is to multiply both sides by the least common multiple (LCM) of the denominators.

To solve the equation (4)/(x) + (1)/(2) = (5)/(x):

Find a common denominator for the fractions on both sides of the equation. In this case, the common denominator is 2x.

Multiply the left side of the equation by 2/2 to get:

(8)/(2x) + (1)/(2) = (5)/(x)

Combine the two fractions on the left side of the equation:

(8+1)/(2x) = (9)/(2x)

Set the left side of the equation equal to the right side:

(9)/(2x) = (5)/(x)

Cross-multiply:

9x = 10x

Simplify:

x = 0

Therefore, the solution to the equation is x = 0.

Learn more about the Least Common Factor (LCM) at

https://brainly.com/question/30968751

#SPJ4

If workers note that for every "3 m" of rope pulled down-ward, the piano rises 0.3 m, then we have shown that 700 N is required force to lift the motorcycle.

The term "Mechanical advantage" (MA) is defined as ratio of "output-force" to "input-force" in a machine.

In this case, the output force is the weight of the motorcycle (7000 N) and the input force is the force applied to pull the rope downward.

We use the formula for mechanical advantage in a pulley system, which is given by:

⇒ MA = (distance moved by the effort) / (distance moved by the load),

In this case, the distance moved by the effort is 3 m, and

The distance moved by the load is 0.3 m,

Substituting the values,

We get,

⇒ MA = 3/0.3,

⇒ MA = 10,

So, mechanical advantage of "pulley-system" is 10.

Now, we use mechanical advantage to calculate the required force to lift the motorcycle.

Since mechanical advantage is defined as the ratio of output force to input force, we can rearrange the formula as:

⇒ Input force = (Output force)/(Mechanical advantage),

Substituting values for "output-force" as 7000 N and "mechanical-advantage" as 10,

We get,

⇒ Input force = 7000/10,

⇒ 700 N,

Therefore, the required force to lift motorcycle is 700 N.

Learn more about Pulley System here

https://brainly.com/question/30784562

#SPJ4

Answer:

59.5[tex]cm^{2}[/tex]

Step-by-step explanation:

You have two shape: a square and a triangle

Square:

The area of a square is the sides squared

a = [tex]s^{2}[/tex]  The side length is 7 (7 x 7 = 49)

a = [tex]7^{2}[/tex]

a = 49

Triangle:

a [tex]\frac{bh}{2}[/tex]  The base times the height divided by 2

The base is 7 and the height is 3.

a = [tex]\frac{7x3}{2}[/tex] = [tex]\frac{21}{2}[/tex] = 10.5

Add the two areas together: 49 + 10.5 = 59.5

Helping in the name of Jesus.

The solution to the equation 4,300e^(0.07x) - 123 = 5,000 for x is 2.5.

We can solve the equation 4,300e^(0.07x) - 123 = 5,000 for x by first adding 123 to both sides and then dividing both sides by 4,300 and taking the natural logarithm of both sides:

Using the above as a guide, we have the following:

4,300e^(0.07x) - 123 = 5,000

4,300e^(0.07x) = 5,123

e^(0.07x) = 5,123/4,300

e^(0.07x) = 1.1914

0.07x = ln(1.1914)

x = ln(1.1914)/0.07

Using a calculator, we get:

x ≈ 2.50

Rounding to the nearest tenth, the solution to the equation is approximately 2.5.

Read more about equation at

https://brainly.com/question/148035

#SPJ1

Answer:

26) 1.32

27) 90

28) 0.00845

29) 2.56x10^-1

30) 9.5x10^-3

31) 7.8x10

The value of the expression as a single rational number is -8.

Kent was likely referring to the idea that subtracting a negative number is the same as adding a positive number. Specifically, to subtract a negative number, we can add the opposite of that number (i.e., the positive version of that number). In this case, we can rewrite the expression as:

= -9.5 - (-8) - 6.5

= -9.5 + 8 - 6.5      (replacing -(-8) with its positive equivalent 8)

= (-9.5 - 6.5) + 8    (grouping like terms)

= -16 + 8                (simplifying)

= -8

Therefore, the value of the expression is -8, which is a single rational number.

To know more about rational number

https://brainly.com/question/24540810

#SPJ4

a) The probability of him answering all seven questions correctly is [tex](1/4)^7[/tex]or approximately 0.000019%.

b) Therefore, the probability of him answering exactly three questions correctly is [tex]35 * (1/4)^3 * (3/4)^4[/tex]or approximately 19.7%.

c) The probability of him answering at least three questions correctly is the sum of these probabilities, which is approximately 71.5%.

Since each question has four choices and only one is correct, the probability of guessing the correct answer for any one question is 1/4.

a) To answer all seven questions correctly, Edward must guess the correct answer for each question.

Therefore, the probability of him answering all seven questions correctly is [tex](1/4)^7[/tex] or approximately 0.000019%.

b) To answer exactly three questions correctly, Edward must guess the correct answer for three questions and the incorrect answer for the remaining four questions.

The number of ways in which he can do this is given by the binomial coefficient C(7,3) = 35.

The probability of him guessing three questions correctly and four questions incorrectly is [tex](1/4)^3 * (3/4)^4.[/tex]

Therefore, the probability of him answering exactly three questions correctly is [tex]35 * (1/4)^3 * (3/4)^4[/tex]or approximately 19.7%.

c) To answer at least three questions correctly, Edward must either guess three, four, five, six, or seven questions correctly.

We have already calculated the probability of him guessing exactly three questions correctly.

The probability of him guessing exactly four questions correctly is [tex]C(7,4) * (1/4)^4 * (3/4)^3 = 35 * (1/4)^4 * (3/4)^3[/tex]or approximately 34.7%.

The probability of him guessing exactly five questions correctly is [tex]C(7,5) * (1/4)^5 * (3/4)^2 = 21 * (1/4)^5 * (3/4)^2[/tex] or approximately 16.3%.

The probability of him guessing exactly six questions correctly is[tex]C(7,6) * (1/4)^6 * (3/4)^1 = 7 * (1/4)^6 * (3/4)^1[/tex] or approximately 0.82%. Finally, the probability of him guessing all seven questions correctly is (1/4)^7 or approximately 0.000019%.

For similar question on probability.

https://brainly.com/question/28185528

#SPJ11

The diameter of the semicircle for the given area of the semicircle 1. 2717 square meters is equal to 1.8 meters.

Area of a semicircle = 1. 2717 square meters

The area of a semicircle is given by the formula,

A = πr^2 / 2

where A is the area

And r is the radius of the semicircle.

Rearrange the formula to solve for r,

r = √(2A/π)

Substituting the given value of A = 1.2717 square meters into this formula, we get,

⇒ r = √(2 × 1.2717 / π)

⇒ r = 0.9 meters

Since the diameter of a semicircle is twice the radius,

The diameter of this semicircle is equal to,

d = 2r

  = 2 × 0.9

   = 1.8 meters

Therefore, the diameter of the semicircle is equal to 1.8meters.

Learn more about diameter here

brainly.com/question/14034336

#SPJ4

Answer:

X = 65°

Y = 75°

Z = 65°

Step-by-step explanation:

Hello!

Angle Y and the angle measuring 75 degrees are corresponding angles, and corresponding angles are congruent to each other in degree measure.

There is also another set of corresponding angles, and those are Angle Z and Angle X.

Since Angle Y and 75° are corresponding, we can state that Angle Y is also 75°. We can now find Angle Z by subtracting 40° and 75° from 180°. This is because the sum of angles in a triangle is 180°.

The measure of Angle Z is 65°. We know that Z and X are corresponding, so X is also 65°.

2. The appropriate measure of center for the given data is the median, and it equals 19.

5.  We can predict that there were about 169 principals in attendance at the conference.

6. The best graphical representation for the teacher's data would be a bar graph.

7.  A histogram is used to display continuous data, while a bar graph is used to display categorical data.

8. The correct circle graph to represent the data is titled "New York City Visitor's Transportation"

9. We can predict that the college will need about 1440 scoops of ice cream.

Answer 2:

The appropriate measure of center for the given data is the median, and it equals 19. We can determine this from the box plot since the line inside the box represents the median of the data, and the box itself represents the middle 50% of the data. Since the box extends from 17 to 21, we know that half of the data falls below 19 and half above, making it the median. The mean is not a good measure of center for this data because it can be influenced by outliers, which are present in this dataset.

Answer 5:

Since we know that 15 out of 80 people in the exhibit room were principals, we can assume that about 15/80 (or about 0.1875) of the attendees were principals. To estimate the number of principals in attendance, we can multiply this fraction by the total number of attendees:

0.1875 x 900 ≈ 169

Therefore, we can predict that there were about 169 principals in attendance at the conference.

Answer 6:

The best graphical representation for the teacher's data would be a bar graph. A bar graph is a useful way to display categorical data, such as the subject preferences of the students. Each subject can be represented by a bar, with the height of the bar representing the frequency or percentage of students who prefer that subject.

Answer 7:

The correct graph to display the data is a bar graph with the title "Favorite Sport" and the x-axis labeled "Sport" and the y-axis labeled "Number of Students". The bars should be labeled "Basketball" with a value of 17, "Baseball" with a value of 12, "Soccer" with a value of 27, and "Tennis" with a value of 44. A histogram is used to display continuous data, while a bar graph is used to display categorical data.

Answer 8:

The correct circle graph to represent the data is titled "New York City Visitor's Transportation" and has five sections labeled "Walk" at 30%, "Bicycle" at 6%, "Car Service" at 11.25%, "Bus" at 7.5%, and "Subway" at 20.25%. To calculate the percentages, we can divide the number of visitors for each mode of transportation by the total number of visitors (i.e., 300), then multiply by 100% to get the percentage.

Answer 9:

To estimate the number of students who prefer ice cream, we can add up the number of students who chose ice cream, which is 81. Then, we can set up a proportion:

81/225 = x/4000

where x represents the number of students who prefer ice cream out of the total population of 4000. Solving for x, we get:

x = 81 x 4000 / 225 = 1440

Therefore, we can predict that the college will need about 1440 scoops of ice cream.

Learn more on central tendency here https://brainly.com/question/17631693

#SPJ1

Answer:

gcf is 'x'

Step-by-step explanation:

the common factor to the terms 'x²' and '3x' is 'x'