Consider the aldol-dehydration reaction. Draw the two possible products of the reaction between benzaldehyde and methylethylketone. (Do not draw the products of the double-condensation.)

Answer:

Pressure measurement is the analysis of an applied force by a fluid (liquid or gas) on a surface. Pressure is typically measured in units of force per unit of surface area.

hope this helps! mark as brainlist! :D

Answer:

Answer:

382.49 C degree Celsius

Explanation:

Hello,

This problem deals with understanding the ideal gas law which hopes to predict how ideal gases might behave in any given condition. I listed the formula below and we are basically just going to solve for temperature by rearranging the equation as seen on the picture (there's also other rearranged ones in case you need to solve for those).

Universal gas constant R has a value of 0.0821 L * atm/(mole * K) when working with these given units so it will be part of this equation. R value changes based on what units you have.

T = PV/nR

   = (2.33) (72.31) / (3.13)(0.0821)

   = 655.64 K

Question is asking temperature in celsius so we employ the formula attached below:

C = K - 273.15

   = 655.64-273.15

    = 382.49 degree Celsius

382.49 degree Celsius is the answer!

Answer:

the answer is c

Explanation:

i did the test

The enthalpy of the formation of water is -285.8 kJ/mol. The information that can be made by the statement is heat is released during the process. The correct option is C.

Enthalpy is the volume times the pressure times the internal energy of the system. It is an entity of thermodynamics. It is the measurement of the energy in a thermodynamic system. The enthalpy totals the internal energy plus pressure and volume.

The statement that is given here is given that enthalpy is -285.8 kJ/mol. The value is negative, so the energy is released here. When energy is gained the energy will be positive and when the energy is released it is negative.

Thus, the correct option is C, heat is released during the process regarding the given statement of enthalpy.

To learn more about enthalpy, refer to the link:

https://brainly.com/question/24136717

#SPJ6

Answer:c it’s dropped off in the kidneys

Explanation:

I took the quiz

The solid wastes are from the circulatory system is expelled to the kidney where, the nitrogenous wastes like urea and uric acid is excreted as urine from the body.

A circulatory system is an organ system, where the blood is purified and oxygenation of blood takes place. Through circulatory system, the blood reaches throughout the body pumped from the heart through veins.

The organs included in circulatory system are lungs, heart, aorta, veins, blood vessels etc. There are various kinds of blood vessels each having specific functions.

There is a network of blood vessels including arteries and large veins, capillaries that join the venules and other veins. All the nutrients and ions are circulated throughout the body through blood and solid wastes are then expelled to kidney.

Kidney function as a sieve to clean the good fluid from waste products. Uric acid and urea along with water excreated as urine then. Thus, option C is correct.

To find more about circulatory system, refer the link below:

https://brainly.com/question/10103458

#SPJ6

Answer:

32.5 moles of O2(g) are necessaries for a complete reaction

Explanation:

Based on the reaction of combustion of C4H10(g):

C4H10(g) + 13/2 O2(g) → 4CO2(g) + 5H2O(g)

1 mole of C4H10 needs 13/2 moles O2 for a complete reaction.

That means, the moles of O2 required for a reaction of 5.00 moles of C4H10 are:

5.00 moles C4H10 * (13/2mol O2 / 1mol C4H10) =

32.5 moles of O2(g) are necessaries for a complete reaction

7.4 moles of methane (CH₄)

14.8 moles of oxygen gas (O₂)

Answer:

yep

Explanation:

that why I have someone else post questions for me. But its a good incentive to help others to help you to help me to you to help others.

Answer:

The device shown is a calorimeter that used to measure the heat transfer by a reaction under constant volume.

Explanation:

Answer:

0.01 M

Explanation:

As this problem deals with a dilution process, we can solve it by using the following formula:

Where subscript 1 stands for the initial concentration and volume, while 2 stands for the final conditions.

That means that in this case:

We input the given data:

Answer:0.104

Explanation:

Answer:

0.104

Explanation:

convert grams to moles “10.0 x 1/40”

divide moles by the liters 0.25/2.4

answer: 0.104

Answer:

One movement that i can't do is float in mid air

Explanation:

Answer:

acid

Explanation:

solution with pH less than 7 is acid

those with more that 7 is base

those equal to 7  is neutral

Answer: Tadpole, also called polliwog, aquatic larval stage of frogs and toads. Compared with the larvae of salamanders, tadpoles have short, oval bodies, with broad tails, small mouths, and no external gills. The internal gills are concealed by a covering known as an operculum.

Explanation:

Answer:

[tex]0.00068M[/tex]

Explanation:

Hello there!

In this case, according to the ionization of calcium hydroxide, a strong base:

[tex]Ca(OH)_2\rightarrow Ca^{2+}+2OH^-[/tex]

Thus, since there is a 1:2 mole ratio of calcium hydroxide to hydroxide ions, we apply the following proportional factor to obtain:

[tex]0.00034\frac{molCa(OH)_2}{L}*\frac{2molOH^-}{1molCa(OH)_2} \\\\=0.00068\frac{OH^-}{L}\\\\=0.00068M[/tex]

Regards!

Answer:

Explanation:

The assumption that the HCl is completely ionized means that the original concentration of the acid is equal to [H⁺].

With [H⁺], we can calculate [OH⁻], by using the following formula:

Finally we calculate the pH of the solution:

Answer: Formula is C4H8O. In every branch of line formula there are Carbon atom. Carbon makes 4 bonds so In branch left in which two CH3-groups are attached there are also an Hydrogen aton which is not shown.

Explanation: Molecule is organic, it is classified as aldehyde.

Hydrocarbons contains only Carbon and Hydrogen atoms, Organic molecules can contain also other atoms.

Reactions of aldehydes are reduction to alcoholes or oxidation to carboxylic acids. It can not for a polymer.

Answer:

C. 13.65.

Explanation:

With the given hydroxide ion concentration [OH⁻] we can calculate the pOH of the solution, using the following formula:

Then, with the pOH we can proceed to calculate the pH of the solution, with the formula:

The correct answer is option C. 13.65.

Answer:

a) 0.100 M

b) 0.395 M

Explanation:

a) Calculate the molarity of a solution that contains 0.200 moles of NaOH (solute) in 2.00 L of solution

We will use the following expression for molarity.

[NaOH] = moles of solute / liters of solution

[NaOH] = 0.200 mol/2.00 L = 0.100 M

b) Calculate the molarity for a solution that contains 15.5 g of NaCl (solute, 58.44 g/mol) in 671 mL of solution

We will use the following expression for molarity.

[NaCl] = mass of solute / molar mass of solute × liters of solution

[NaCl] = 15.5 g / 58.44 g/mol × 0.671 L = 0.395 M

MgSO4 + Na3PO4 = Na2SO4 + Mg3(PO4)2

Answer: The products of Na3PO4 + MgSO4 are Na2SO4 + Mg3(PO4)2

Explanation:

Answer:

Astronomers measure distance in space or the distance light travels in one Earth year.

" A light-year is how astronomers measure distance in space. It's defined by how far a beam of light travels in one year – a distance of six trillion miles."

Answer:

francium or cesium

Answer:

(a) 157.7 g

(b) 7.04 g/dm³

Explanation:

(a) From the question,

According to Avogadro's Law,

1 mole of every gas at STP occupies a volume of 22.4 dm³

But mass of 1 mole of the diatomic gas  = molar mass of the gas.

This Implies that,

The molar mass of the gas at STP occupies a volume of 22.4 dm³

From the question,

If,

0.25 L bottle contain 1.76 g of the gas,

Therefore,

Molar mass of the gas = (1.76×22.4)/0.25

Molar mass of the gas = 157.7 g.

(b) Density of the gas = mass/volume

D = m/v

Given: m = 1.76 g, v = 0.25 L = 0.25 dm³

Therefore,

D = 1.76/0,25

D = 7.04 g/dm³

Answer:

The main function of the cell membrane is to protect the cell from the outer environment.

Answer: The answer is D.) to separate the inside of the cell from the outside environment

Explanation:

Answer:

hope you liked it!!!!!!

A compound is a pure substance that is composed of elements chemically bonded in definite proportions. A compound can be broken down into simpler substances only by chemical reactions, such as electrolysis.

A solution is a homogeneous mixture, meaning that it is the same throughout. A solution is composed of one or more solutes dissolved in a solvent. The proportions of the solute(s) can vary, as the components of a solution are not chemically bonded. The components of a mixture can be separated by physical means, such as filtration and distillation

Answer:

Fe is limiting reactant and 3.00g of Fe2O3 will be produced

Explanation:

To solve this question we must convert the mass of each reactant to moles and, using the reaction we can find limiting reactant. With moles of limiting reactant we can find moles of Fe2O3 and its mass as follows:

Moles Fe -Molar mass: 55.845g/mol-

2.1g * (1mol / 55.845g) = 0.0376 moles

Moles O2 -Molar mass: 32g/mol-

2.1g * (1mol / 32g) = 0.0656 moles

For a complete reaction of 0.0656 moles of O2 are needed:

0.0656moles O2 * (4mol Fe / 3 mol O2) = 0.0875 moles Fe

As there are just 0.0376 moles,

Fe is limiting reactant

The mass of Fe2O3 is:

Moles:

0.0376 moles Fe* (2mol Fe2O3 / 4mol Fe) = 0.0188 moles Fe2O3

Mass:

0.0188 moles Fe2O3 * (159.69g / mol) =

3.00g of Fe2O3 will be produced

Answer:

–272.96 °C

Explanation:

From the question given above, the following data were obtained:

Initial temperature (T₁) = 27.0 °C

Initial volume (V₁) = 630 L.

Final volume (V₂) = 92.0 mL

Final temperature (T₂) =?

Next, we shall convert 27.0 °C to Kelvin temperature. This can be obtained as follow:

T(K) = T(°C) + 273

Initial temperature (T₁) = 27.0 °C

Initial temperature (T₁) = 27.0 °C + 273

Initial temperature (T₁) = 300 K

Next, we shall convert 92.0 mL to L. This can be obtained as follow:

1000 mL = 1 L

Therefore,

92 mL = 92 mL × 1 L / 1000 mL

92 mL = 0.092 L

Next, we shall determine the final temperature.

Initial temperature (T₁) = 300 K

Initial volume (V₁) = 630 L.

Final volume (V₂) = 0.092 L

Final temperature (T₂) =?

V₁ / T₁ = V₂ / T₂

630 / 300 = 0.092 / T₂

2.1 = 0.092 / T₂

Cross multiply

2.1 × T₂ = 0.092

Divide both side by 2.1

T₂ = 0.092 / 2.1

T₂ = 0.04 K

Finally, we shall convert 0.04 K to celsius temperature. This can be obtained as follow:

T(°C) = T(K) – 273

Final temperature (T₂) = 0.04 K

Final temperature (T₂) = 0.04 – 273

Final temperature (T₂) = –272.96 °C

Answer:

[tex]C_{alloy}=0.497\frac{J}{g\°C}[/tex]

Explanation:

Hello there!

In this case, according to this calorimetry problem on equilibrium temperature, it is possible for us to infer that the heat released by the metal allow is absorbed by the water for us to write:

[tex]Q_{allow}=-(Q_{water}+Q_{Al})[/tex]

Thus, by writing the aforementioned in terms of mass, specific heat and temperature, we have:

[tex]m_{alloy}C_{alloy}(T_{eq}-T_{alloy})=-(m_{water}C_{water}(T_{eq}-T_{water})+m_{Al}C_{Al}(T_{eq}-T_{Al})[/tex]

Then, we solve for specific heat of the metallic alloy to obtain:

[tex]C_{alloy}=\frac{-(m_{water}C_{water}(T_{eq}-T_{water})+m_{Al}C_{Al}(T_{eq}-T_{Al})}{m_{alloy}(T_{eq}-T_{alloy})}[/tex]

Thereby, we plug in the given data to obtain:

[tex]C_{alloy}=\frac{-(400g*4.184\frac{J}{g\°C} (30.5\°C-10.0\°C)+200g*0.900\frac{J}{g\°C}(30.5\°C-10.0\°C)}{150g(30.5\°C-540\°C)} \\\\C_{alloy}=0.497\frac{J}{g\°C}[/tex]

Regards!