Answer:
Silicon Dioxide is a compound usually referred to as Quartz, it's a crystalline sort of material that is commonly found and used for equipment and furniture (like tables for example). Their molecular geometry is of tetrahedral shape (how their bonds look like and such)
Gold is an element that is a transitional metal that is quite malleable (able to hammer it to sheets) and is ductile (can be made into wires). As you probably have guessed, gold is used a lot for jewelry due to its lustrous appearance, and the fact that it can't corrode as well as its rarity. Due to it not being able to corrode, it's pretty useful in circuitry as it requires less management unlike elements with higher electrical conductivity like copper or silver. However gold is pretty costly so it's not often relied on for technology and mostly just used for show instead.
N2 or nitrogen gas, may seem like a compound for people new to chemistry but is actually just a diatomic molecule, meaning they are composed of only 2 atoms. So elements that are diatomic are commonly found with only 2 atoms (Oxygen gas for example, or Hydrogen gas) Nitrogen is part of the "magnificent seven" (the elements which are diatomic". Nitrogen is essential for a lot of living things (aside from us), and since they are the most abundant material in our air (78% of air is Nitrogen), there's plenty of life growing.
Compound and elements are differ from each other. Silicon dioxide ( SiO₂ ) is compound , gold ( Au ) is element and nitrogen gas ( N₂ ) is compound.
What is difference between molecule and elements ?Elements are always made-up of only one type of atom. Molecule is made up of more than one type of atom. Silicon dioxide is a compound, which is crystalline in nature. Their molecular geometry is of tetrahedral shape.
Gold is an element that is a transitional metal that is quite malleable and is ductile. Gold ( Au ) is used a lot for jewelry. Nitrogen gas is compound . It is diatomic in nature, So elements that are diatomic are commonly found with only 2 atoms.
Hence, silicon dioxide is compound, gold is element, and nitrogen gas is also compound.
To learn more about molecules and elements follow the link below;
https://brainly.com/question/15304687
#SPJ2
Do you feel that this equation is currently following the law of conservation of mass?
N2 + H2 → NH
Answer:
N2 + H2 --> 2 NH
Explanation:
You need to add 2 to make it correct
Four students wrote down their descriptions of rotting.
Nick: Rotting is a chemical change that happens to fruit like strawberries or apples. Rotting happens slower when there is more heat.
Kevin: Rotting is a chemical change that happens to iron objects like nails. It causes iron objects to change color and texture.
Howie: Rotting is a physical change that happens to food like fruit. Rotting happens faster with increased heat and changes a fruits color and odor.
AJ: Rotting is a chemical change that affects food such as fruit. Rotting changes the fruits color and odor and happens faster with increased heat.
Which student had the best description of rotting?
Nick
Kevin
Howie
AJ
Answer:
Technically only AJ got it correct Howie got it wrong because rotting is a chemical not a physical change AJ was correct becuase he knew what would make the fruit go faster so yes howie would have been right if he got the right kind change.
Explanation:
hope this help
Element of group 2 loses two electrons in the process of a chemical combustion. what is the ionic charge? +2 or -2
help plz I don't understand the last 2 questions
Answer:
b) (i): 0.91 Amgstroms
(ii): 9.1 × 10^-11 Angstroms
(c): Volume = 20 Angstroms
Explanation:
• Let's first convert the units:
[tex]{ \rm{1 \:nanometre = 1 \times {10}^{ - 9} \: metres} } \\ { \rm{10 \: angstroms = 1 \times {10}^{ - 9} \: metres}} \\ { \rm{1 \: micrometer = 1 \times {10}^{ - 6} \: metres = 1000 \: nm}} \\ \\ { \rm{1 \: {nm}^{3} = 1000 \: {angstroms}^{3} }}[/tex]
Question (b)
(i)[tex]{ \rm{radius = \frac{diameter}{2} }} \\ \\ { \rm{radius = \frac{0.182}{2} }} \\ \\ { \rm{radius = 0.091 \: nm}} \\ \\ { \mathfrak{ answer{ : { \rm{radius = (0.091 \times 10) \: angstroms}}}}} \\ \\ { \rm{radius = 0.91 \: angstroms}}[/tex]
(ii)[tex]{ \rm{radius = 0.091 \: nm}} \\ \\ { \rm{radius = 0.091 \times( 1 \times {10}^{ - 9} ) \: metres}} \\ \\ { \rm{radius = 9.1 \times {10}^{ - 11} \: m }}[/tex]
(c)[tex]{ \rm{volume = (0.5 \times 0.2) \: nm \times 0.0002 \: micrometer}} \\ \\ { \rm{volume = 0.5nm \times 0.2nm \times (0.0002 \times 1000)nm}} \\ \\ { \rm{volume = 0.5 \times 0.2 \times 0.2 \: nm {}^{3} }} \\ \\ { \rm{volume = 0.02 \: nm {}^{3} }} \\ \\ { \rm{volume = (1000 \times 0.02) \: angstroms {}^{3} }} \\ \\ { \rm{volume = 20 \: angstroms}}[/tex]
what makes matter change from one state to another?
Answer: Adding or removing energy from matter
Explanation:
What is the formula for the compound?
Answer:
the correct answer is CO2 (the last one)
I NEED MORE HELP ASAPP
Answer:
1) Gas
2) Higher
3) Increases
4) Higher
Explanation:
how long would it take to electroplate a flute with 28.3 g of silver (107.87 g/mol) at a constant current of 2.0 amps using AgNO3
It would take 211 hours to plate 28.3 g of silver on a flute.
The equation of the reaction;
Ag^+(aq) + e -----> Ag(s)
We know that 1 F of electricity is required to deposit 107.87 g of Ag. Also 1F = 96500 C
Now;
Since 107.87 g is deposited by 96500 C of electricity
28.3 g is deposited by 28.3 g × 96500 C/ 107.87 g
= 25317 C
Also;
Q = It
I = current
t = time
25317 C = 2.0 amps × t
t = 25317 C /2.0 amps
t = 12658.5 seconds or 211 hours
Learn more about electrolysis: https://brainly.com/question/12054569
Answer:
It would take [tex]3.5hrs[/tex] to electroplate the fluteExplanation:
Electrolysis equation is:
[tex]Ag1+ + 1e- ------> Ag[/tex]
1 mol of Ag requires 1 mol of electron
1 mol of electron = 96485 C
So,
1 mol of Ag requires 96485 C
let us calculate mol of element deposited:
molar mass of Ag = [tex]107.87 g/mol[/tex]
number of mol of Ag, [tex]n = \frac{mass of Ag}{molar mass of Ag}[/tex]
[tex]n = \frac{28.3}{107.87}\\\\n = 0.2623 mol[/tex]
[tex]total charge = mol of element deposited * charge required for 1 mol\\\\total charge = 0.2623*9.649*10^4\\\\total charge = 2.531*10^4 C[/tex]
Therefore,
[tex]time = \frac{Q}{i}\\\\= \frac{2.531*10^4}{2}\\\\= 1.265*10^4 seconds\\\\= 3.515 hr[/tex]
For more information, visit
https://www.homeworklib.com/qaa/1142722/5-how-long-would-it-take-to-electroplate-a-flute
an atom has 10 protons and a mass number of 18 how many neutrons does it contain
Answer:
8 i believe
Explanation:
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the number of neutrons in the given atom is 8.
What is atom?Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.
Mass number =number of protons + number of neutrons
Atomic number = number of protons= number of electrons
18 =10 + number of neutrons
number of neutrons=8
Therefore, the number of neutrons in the given atom is 8.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ2
In a chemical change energy can be ___?
A. Created but not destroyed
B. Either created or destroyed
C. Destroyed but not created
D. Neither created nor destroyed
Answer:
chemical change energy can neither be created nor destroyed.
Explanation:
the rule of law of conversion states that energy can only be converted from said energy to another. it cannot be created and destroyed.
Answer:
D. Neither created nor destroyed
Explanation:
The law of conservation of energy states that energy is neither created nor destroyed.
The DEA has designated five chemicals often found in spice as _____ controlled substances, making it illegal to sell, buy, or possess these chemicals.
Answer:
I'm pretty sure this doesn't really connect with chemistry much but the answer should be Schedule 1 as stated by the Drug enforcement agency.
What does the law of conservation of matter state?
a Matter can be created, destroyed, and changed.
b Matter can be destroyed and created, but not changed.
c Matter can be changed, but not created or destroyed.
d Matter can be created and changed, but not destroyed.
The answer is c. Matter can be changed, but not created or destroyed.
Compare sodium and silver before and after they are placed in water. Has a new substance been produced in each case?
Answer:
Sodium is placed in group 1 of the periodic table of Alkali metals, and has a valence shell with one electron, making them very reactive. When placed in water, it disperses heat and begins to ignite and burn (due to its very reactive nature), resulting compound is hydrogen gas (H2), and a very strong base (Sodium Hydroxide, NaOH) used for cleaning appliances and for neutralizing agents.
Silver is placed on the transitional metal section of the periodic table, not quite reactive but is the most conductible element on the planet, is malleable and ductile. Due to it being costly and its rarity, it's not relied on for computer parts or wires. Silver doesn't actually directly react with water in its liquid state. It does produce hydrogen gas and Silver Oxide when reacting with water vapour.
In short, Sodium and water create new products, while Silver and water (only in water's gaseous form) form different products.
i need help with this asap..
1. What has shininess
2.ability to change its shape
I think it's metal if its abt science
Answer:
i think metal or glass not sure but i think its metal
Explanation:
is seafloor spreading is beneficial or harmful for the earth
Answer:
Yes
Explanation
I learned it in science class
______________ is a durable material and is widely used for casting, which is a process by which the melted material is poured into a mold. A. Bronze c. Copper b. Silver d. Gold Please select the best answer from the choices provided A B C D.
The material that has been widely used in casting has been copper. Thus, option C is correct.
Casting has been the process of molding the liquid into a specific shape with the mold. The casting involves the heating of elements and converting them into liquid. The liquid has been poured into the mold and cooling results in the casted material.
The casted material has been selected based on the boiling temperature, cooling temperature, resistivity, cost-effectiveness, and damping ability.
The material that has been consisted of these characteristics has been copper. Thus, copper has been commonly used for casting. Thus, option C is correct.
For more information about casting, refer to the link:
https://brainly.com/question/1253405
5.27x10^45 molecules of h20 is how many moles
Answer:
6.02 × 10^23 molecules = 1 mole
5.27 × 10^45 molecules = x
x = 5.27 × 10^45/ 6.02 × 10^23 × 1
= 8.754 × 10^21 mol
I don't know if it's correct but based on the question that was the only way I saw how to work it out
Al + FeCl2 → Fe + AlCl3.
Answer:
Hope this helps :)AlCl3 + Fe = Al + FeCl2
Chemical Equation Details aluminum chloride + iron = aluminum + iron(ii) chloride
[tex]\text{Balanced reaction:}\\\\2\text{Al} + 3\text{FeCl}_2 \longrightarrow 3\text{Fe} + 2\text{AlCl}_3[/tex]
Name two elements that have the same properties as sodium (Na)
Answer: Any Alkali metal
Explanation:
T he cool thing about the periodic table is the way it is organized. You can find chemical with similar properties is just looking in the column they are in in to determine the answer. Since Na is in the first column, any of these answer can work:
Li, K, Rb, Cs, and Fr
What is the mass of 0. 513 mol Al2O3? Give your answer to the correct number of significant figures. (Molar mass of Al2O3 = 102. 0 g/mol) 0. 513 mol Al2O3 = g Al2O3.
The mass of a 0.513 mol of Al2O3 is 52.33g.
HOW TO CALCULATE MASS:
The mass of a substance can be calculated by multiplying the molar mass of the substance by its number of moles. That is;
mass of Al2O3 = no. of moles of Al2O3 × molar mass of Al2O3
According to this question, there are 0.513 moles of Al2O3.
Mass of Al2O3 = 0.513 × 102
Mass of Al2O3 = 52.33g
Therefore, the mass of a 0.513 mol of Al2O3 is 52.33g.
Learn more about mass calculations at: https://brainly.com/question/8101390?referrer=searchResults
PLEASSE HELP gotta get the answers neowww, basically just match the letters with the things.
Answer:
North pole-A
South pole- F
Equator- E
Polar Easterlies-C
Prevailing Westerlies-D or B-not sure
Trade Winds-D or B-not sure
In a covalent bond between identical atoms, the electrons are shared between the atoms. If the atoms are not identical, the electron distribution is so that the electrons are closer to one atom than the other. This type of bond is called a(n) covalent bond.
Answer:
If the atoms are not identical, the electron distribution is electrons are closer to one atom than the other. This type of bond is called a(n) covalent bond.
Explanation:
how molecular structure affects solubility?
Answer:
The molecular structure affects solubility mainly biased on its polarity or bonded ions.
Explanation:
Polar molecules will better interact with the water molecules and will dissolve easier. Nonpolar molecules can dissolve if they are small enough, however they don't interact well with the polar molecules. Bonded ions, such as NaCl split into a cation Na and an anion Cl which the positive charge on the Na will be attracted to the oxygen, and the negatively charged Cl will be attracted to the positive Hydrogen.
**Remember this rule, like dissolves like, meaning nonpolar dissolves nonpolar and polar dissolves polar.
I hope this helps!
2. Which substance will form a solution with water? (Select all that app
string
sand
sugar
salt
Answer:
sugar and salt, as they can dissolve in water. Sugar and salt have a high solubility in water. So, sugar and salt can form a solution with water.
Explanation:
HELPPPPP ASAP PLSSSS !!!!!!!!!
Answer:
maybe i can help for you where the question
Gasoline has a density of 0.7197 grams per milliliter. Calculate the mass, in grams, of a sample of gasoline with a volume of 48.5 milliliters.
Answer:
34.9103 or 34.9 g
Explanation:
Remember Density is a broken heart: m/v.
In this scenario (Let x = # of grams in the sample of gasoline),
D = 0.7198 g/mL = x g / 48.5 mL
So,
(0.7198 g/mL) * (48.5 mL) = x g
x g = 34.9103 = 34.9 g (Accounting for Significant Figures)
To find the number of neutrons in a atom, you subtract the number of_____ from the mass number.
You can simply subtract the atomic number from the mass number in order to find the number of neutrons.
Figure 2
Describe how a dog grows. Describe their mode of reproduction
Explanation:
Although all puppies are officially considered adult dogs once they reach one year old, puppies continue to grow in height and size while their bones are still developing, which takes anywhere from 6 to 24 months. Their skeletal growth is what determines how tall they will become as adults.
Why are unbalanced equations NOT useful in
chemistry?
Answer:
If the numbers of each type of atom are different on the two sides of a chemical equationExplanation:
why does fluorine have the highest electronegativity
Answer:
Because it only needs one more electron to get to a full valence shell (8), so it really wants it and is pulling other electrons in. It also has to do with needing one more electron to fill the 2p shell. It is a small element which means its electrons are pulled tightly to the nucleus.
Hope this helps!
Explanation: