Construct an example with two random variables X and Y marginally Gaussian but whose sum is not jointly Gaussian.

y = 7x is the equation of the given table passing through the coordinate points used.

The formula for finding the equation of a line in slope-intercept form is expressed as:

y =mx + b

where:

m is the slope

b is the intercept

Determine the slope

slope = 14-7/2-1

slope = 7/1

slope = 7

Determine the y-intercept

y = mx + b

7 = 7(1) + b

7 = 7 + b

b = 0

Hence the required equation of the line passing through (1, 7) and (2, 14) is

y = 7x

Learn more on equation of a line here: https://brainly.com/question/18831322

#SPJ1

the critical value corresponding to a sample size of 24 and a confidence level of 95% is 2.064.

the critical value corresponds to the z-score that defines the boundary for the confidence interval. In this case, with a sample size of 24 and a confidence level of 95%, we use a two-tailed z-test. Looking up the z-score for a confidence level of 95%, or alpha of 0.025, we can find the critical value of 2.064.

the critical value for a sample size of 24 and a confidence level of 95% is 2.064. This value is important in calculating the confidence interval for the population parameter.

To know more about value  visit :-

https://brainly.com/question/30145972

#SPJ11

The relative frequency for getting a marble that is either red or blue is equal to 16/25

When we perform an experiment N times, and we get a given outcome K times, the relative frequency of said outcome is:

F = K/N

Here we can see that the experiment was performed 25 times, and the outcomes blue or red appeared 8 times each (so 16 in total)

Then the relative frequency for getting a marble that is either red or blue is:

F = 16/25 = 0.64

Learn more about relative frequency at:

https://brainly.com/question/3857836

#SPJ1

Answer:

4

Step-by-step explanation:

the period is from the top minus top, bottom minus bottom, etc..

one point at the top is one and the next is 5.

5-1=4

hope this helps!

The statement "When the standard deviations are equal but unknown, a test for the differences between two population means has n − 1 degrees of freedom" is false because -

when the standard deviations are equal but unknown and we use a two-sample t-test to test for the difference between the means of two populations, the test statistic follows a t-distribution with degrees of freedom given by:

df = (n1 + n2 - 2)

where n1 and n2 are the sample sizes of the two populations.

So, the degrees of freedom depend on the sample sizes, not the equality of the standard deviations.

To know more about standard deviations refer here:

https://brainly.com/question/13336998#

#SPJ11

The length of the ladder is approximately 8.942 feet.

To find the length of the ladder, we can use trigonometry and the given angle of elevation.

In this scenario, the ladder acts as the hypotenuse of a right triangle, the base represents the adjacent side, and the height of the wall represents the opposite side.

We are given that the base of the ladder is 4 feet, and the angle of elevation is 63°.

To find the length of the ladder, we can use the trigonometric function cosine (cos), which relates the adjacent side and the hypotenuse:

cos(θ) = adjacent / hypotenuse.

In this case, θ represents the angle of elevation, and the adjacent side is the base of the ladder.

Let's plug in the values into the equation:

cos(63°) = 4 / hypotenuse.

To solve for the hypotenuse (length of the ladder), we can rearrange the equation as follows:

hypotenuse = 4 / cos(63°).

Now, we can use a calculator to find the cosine of 63°:

cos(63°) ≈ 0.447.

Substituting this value back into the equation, we have:

hypotenuse = 4 / 0.447.

Evaluating this expression, we find:

hypotenuse ≈ 8.942.

For similar question on trigonometry.

https://brainly.com/question/25618616

#SPJ11

Here's an example implementation of the BonusTooLowException class, designed to be thrown when a bonus value is less than $2000.

We can also create an Executive class that demonstrates how to use this exception.

public class BonusTooLowException extends Exception {

   public BonusTooLowException(String message) {

       super(message);

   }

}

public class Executive {

   private String name;

   private double bonus;

   public Executive(String name, double bonus) throws BonusTooLowException {

       this.name = name;

       if (bonus < 2000) {

           throw new BonusTooLowException("Bonus amount is too low. Minimum bonus is $2000.");

       }

       this.bonus = bonus;

   }

   public void printDetails() {

       System.out.println("Name: " + name);

       System.out.println("Bonus: $" + bonus);

   }

   public static void main(String[] args) {

       try {

           Executive exec = new Executive("John Doe", 1500);

           exec.printDetails();

       } catch (BonusTooLowException e) {

           System.out.println("Error: " + e.getMessage());

       }

   }

}

In this example, the BonusTooLowException class extends the Exception class, allowing it to be thrown as a checked exception. The Executive class has a constructor that accepts a name and a bonus amount. If the bonus is less than $2000, a BonusTooLowException is thrown. Otherwise, the Executive object is created successfully.

In the main method, we create an Executive object with a bonus amount of $1500, which triggers the BonusTooLowException. We catch the exception and print an error message.

To know more about public static void, visit:

https://brainly.com/question/12978300

#SPJ11

In the cost function c(r) = 5.25r + 125 the value 5.25 best represents the manufacturing cost per radio.

The cost function for manufacturing radios is equal to,

c(r) = 5.25r + 125,

Standard formula of cost function is equal to,

C ( x ) = S + Y ( x )

where S is the total fixed costs,

Y is the variable cost,

x is the number of units,

and C(x) is the total production cost.

Compare it with standard equation we get,

125 is total fixed cost.

The coefficient 5.25 represents the cost per radio produced.

The term 5.25r represents the variable cost, as it is multiplied by the number of radios produced, r.

This term accounts for the cost that increases proportionally with the number of radios manufactured.

In this case, it implies that the cost to manufacture each radio is $5.25.

The constant term 125 represents the fixed cost or start-up cost.

It is the cost that remains constant regardless of the number of radios produced.

This cost covers expenses such as machinery, equipment, and overhead costs.

Therefore, in the given function the value 5.25 best represents the cost per radio manufactured.

Learn more about cost here

brainly.com/question/11158118

#SPJ4

The number of DVDs that will be checked out for every 100 patrons is,

⇒ 70

We have to given that :

A librarian is curious about the habits of the library's patrons. He records the type of item that the first 10 patrons check out from the library.

To Find : Estimate the number of DVDs that will be checked out for every 100 patrons.

Now, Out of 10 persons;

Fiction books = 4

Non-Fiction books = 3

DVD = 2

Audio Book = 1

Total Books = 10

Hence, The number of DVDs that will be  checked out for every 100 patrons is,

= 7 / 10 = x / 100

= 700 / 10 = x

= x = 70

Learn more about the proportion visit:

https://brainly.com/question/1496357

#SPJ1

Answer: $60

Step-by-step explanation:

If the glee club keeps 10% of the revenue from ticket sales, it means they will receive 10% of the total revenue.

To calculate the amount the glee club will get, you can multiply the revenue by 10% (or 0.10):

Amount the glee club will get = Revenue * 0.10

In this case, if the revenue is $600, the amount the glee club will get can be calculated as:

Amount the glee club will get = $600 * 0.10 = $60

Therefore, the glee club will get $60 from the $600 revenue.

There are 20 different combinations are possible.

Since, A combination is a technique to determines the number of possible arrangements in a collection of items where the order of the selection does not matter.

We have to given that;

Her choices of toys are a deck of playing cards, crayons and paper, a model airplane, or a hand-held video game.

And, Her choices of stuffed animals are a bear, rabbit, frog, gorilla, or squirrel.

Hence, There are 4 toys and 5 animals.

So, The combinations for choose one toy and one stuffed animal to take on a trip is,

⇒ ⁴C₁ × ⁵C₁

⇒ 4! / 1! 3! × 5! / 1! 4!

⇒ 4 × 5

⇒ 20

Thus, There are 20 different combinations are possible.

Learn more about the combination visit:

brainly.com/question/28065038

#SPJ1

To diagonalize matrix A, we find eigenvalues (-1, -2, 3) and corresponding eigenvectors. Constructing P and its inverse, we obtain D, where D = P^(-1)AP.



To diagonalize the given matrix A, we need to find the eigenvalues and eigenvectors of A. By solving the characteristic equation, we find that the eigenvalues of A are -1, -2, and 3.Next, we find the corresponding eigenvectors by solving the equations (A - λI)x = 0, where λ is an eigenvalue and I is the identity matrix. The eigenvectors associated with the eigenvalues -1, -2, and 3 are [2, -1, 0], [1, 0, -1], and [3, 0, 2], respectively.

Forming the matrix P using the eigenvectors as columns, we have P = [[2, 1, 3], [-1, 0, 0], [0, -1, 2]]. Taking the inverse of P, we get P^(-1) = [[2/7, -1/7, -9/7], [-3/7, -2/7, 3/7], [3/7, 3/7, -2/7]].Finally, the diagonal matrix D is formed using the eigenvalues of A as its diagonal entries, repeated with their multiplicities. Thus, D = [[-1, 0, 0], [0, -2, 0], [0, 0, 3]].

Therefore, we have D = P^(-1)AP, where P is the invertible matrix and D is the diagonal matrix.

To learn more about diagonal matrix click here

brainly.com/question/31724920

#SPJ11

Sorry for bad handwriting

if i was helpful Brainliests my answer ^_^

Recursive definition for the set Y of all binary strings with more 0's than 1's:

B. ε (empty string) is in Y.

R1. If y is in Y, then for any x in X, both yx and xy are in Y.

R2. If y1 and y2 are in Y, then y1y2 is in Y.

Let's go through the recursive definition for the set Y of all binary strings with more 0's than 1's step by step:

Base case: The empty string ε (no characters) is in Y. This is because it doesn't contain any 0's or 1's, so it satisfies the condition of having more 0's than 1's.

Rule R1: If y is in Y, then for any x in X (a binary string with an equal number of 0's and 1's), both yx and xy are in Y. This rule allows us to add either a 0 or a 1 to the end or beginning of a string that already has more 0's than 1's. Since x is in X, it has an equal number of 0's and 1's. By appending or prepending it to a string in Y, the resulting string will still have more 0's than 1's.

Rule R2: If y1 and y2 are in Y, then y1y2 is in Y. This rule allows us to concatenate two strings that both have more 0's than 1's. Since both y1 and y2 satisfy the condition of having more 0's than 1's, their concatenation y1y2 will also have more 0's than 1's.

By using these rules iteratively, we can generate an infinite number of binary strings that have more 0's than 1's. The rules ensure that each new string produced by the recursive definition also satisfies the condition of having more 0's than 1's.

To know more about binary strings refer here:

https://brainly.com/question/28564491

#SPJ11

4. Slide was half covered at 4 p.m.5. 45 handshakes with 10 people.

6. Classroom dimensions: 5m (width) and 11m (length).7. 8 ducks and 12 goats.8. Frog takes 10 days to reach well top.



4. The bacteria double in area every hour. Since the slide is fully covered by 5 p.m., and the initial area is 2 square cm, we can work backward to find the time when it was half covered. The bacteria cover half the area one hour before being fully covered, so the slide was half covered at 4 p.m.

5. In a room with 10 people, each person shakes hands with the other 9 people. To find the total number of handshakes, we use the formula for combinations. C(10, 2) = 10! / (2! * (10 - 2)!) = 45 handshakes.

6. Let the width of the classroom be x meters. The length is 2x + 1 meters. The perimeter is given by P = 2(length + width). Plugging in the values, we get 32 = 2(2x + 1 + x). Simplifying, we find 6x = 30, and x = 5. So, the width is 5 meters and the length is 11 meters.

7. Let d be the number of ducks and g be the number of goats. The total number of legs is 2d + 4g = 64. The total number of animals is d + g = 20. Solving these equations simultaneously, we find d = 8 ducks and g = 12 goats.

8. The frog crawls up 2 feet each day and slides down 1 foot, resulting in a net gain of 1 foot each day. Since the well is 10 feet deep, the frog needs to climb 10 feet. It gains 1 foot each day, so it will take 10 days to reach the top of the well.

To learn more about dimensions click here

brainly.com/question/31106945

#SPJ11

The area of the region enclosed by one loop of the curve r = 3cos(7θ) can be found by calculating the definite integral of the function r with respect to θ over the appropriate interval. The result of this integral will give us the area of the region enclosed by one loop of the curve.

To find the area of the region enclosed by one loop of the curve, we need to evaluate the definite integral of the function r = 3cos(7θ) with respect to θ. Since the curve completes one loop for every interval of θ from 0 to π/7, we can set up the integral as follows:

A = ∫[0, π/7] (1/2) r^2 dθ

Using the given function r = 3cos(7θ), we substitute it into the integral and simplify:

A = ∫[0, π/7] (1/2) (3cos(7θ))^2 dθ

  = (9/2) ∫[0, π/7] cos^2(7θ) dθ

To evaluate this integral, we can use trigonometric identities or integration techniques such as u-substitution. After integrating, we obtain the value of A, which represents the area of the region enclosed by one loop of the curve.

It's important to note that the given curve r = 3cos(7θ) forms multiple loops, and to find the area of one loop specifically, we need to consider the appropriate interval for θ that corresponds to one complete loop.

To learn more about definite integral : brainly.com/question/30760284

#SPJ11

a.The statement lacks sufficient information or clarification to make a definitive judgment.

b.The statement is true.

c.The statement is false.

d. The statement is true.

a. False: The statement claims that B and C are irrelevant given "&". However, without additional context or information about what "&" represents, it is not possible to determine whether B and C are indeed irrelevant. The statement lacks sufficient information or clarification to make a definitive judgment.

b. True: The statement claims that Uncertainty A and Uncertainty C have both been observed when Decision D is made. If Uncertainty A and Uncertainty C are observed during the decision-making process for Decision D, it implies that these uncertainties play a role in the decision and contribute to the overall decision-making process. Therefore, the statement is true.

c. False: The statement suggests that Decision E is known before Decision D is made. However, the arrow of causality or influence typically indicates that Decision D influences Decision E, rather than the other way around. Without further information or a specific context, it is more reasonable to assume that Decision D precedes Decision E. Therefore, the statement is false.

d. True: The statement claims that the arrow between nodes C and D is an influence arrow. In graphical models or diagrams, arrows are commonly used to represent causal relationships or influences between variables or events. If the arrow between nodes C and D represents an influence, it implies that there is a causal connection from C to D. Therefore, the statement is true.

Learn more about uncertainty

brainly.com/question/15103386

#SPJ11

An area on the graph that represents the amount of goods the company could actually produce include the following: C. The area inside the curved line.

In Economics and Mathematics, a production possibilities curve (PPC) is sometimes referred to as the production possibilities diagram or the production possibilities frontier (PPF) and it can be defined as a type of graph that is typically used for illustrating the maximum and best combinations of two (2) products that can be produced by a producer (manufacturer) in an economy, if they both depend on the following two (2) factors;

Based on the production possibilities curve shown in the image attached above, we can reasonably infer and logically deduce that represents the amount of goods which this company could actually produce is the area inside or within the curved line.

Read more on production possibilities here: brainly.com/question/26460726

#SPJ1

A) Let's assume that the radius of the rotating platform is R meters and the number of laps is n.

Ann's path traveled can be calculated as the circumference of the circle with a radius equal to the distance between her and the center of the platform, which is 3.5 meters. So the length of Ann's path is:

C1 = 2π(3.5) = 7π meters

Laura's path traveled can be calculated using the same formula but with a radius equal to the distance between her and the center of the platform, which is 2 meters. So the length of Laura's path is:

C2 = 2π(2) = 4π meters

Since they complete 50 laps, we can multiply their respective lengths by 50 to get the total distance traveled. Therefore, the total distance traveled by Ann is:

D1 = C1(n) = 7π(50) = 350π meters

And the total distance traveled by Laura is:

D2 = C2(n) = 4π(50) = 200π meters

B) Here is a Venn diagram that shows the relationships between the sets P, Rh, S, Re, T, and Q:

               ___________

              |           |

              |     P     |

        ______|___________|______

       |                         |

       |          Rh             |

       |_________________________|

       |           |             |

       |     Re    |      T      |

       |___________|____________|

                   |       |

                   |   S   |

                   |_______|

In this diagram, each set is represented by a shape, and the relationships between the sets are shown by the overlapping regions. For example, the set of rhombuses (Rh) is entirely contained within the set of parallelograms (P), while the set of squares (S) overlaps with both the set of rectangles (Re) and the set of rhombuses. The set of trapezoids (T) overlaps with both Re and P, but not with Rh or S. Finally, the set of quadrilaterals (Q) includes all of the other sets.

Learn more about length here:

https://brainly.com/question/2497593

#SPJ11

Case A: The length of the fencing of the semicircular garden is 38.562 feet.

Case B: The cost of the fencing of the semicircular garden is 848.36 USD.

Case C: The area of the semicircular garden is 176.715 square feet.

In this problem we find the representation of a semicircular garden, whose fencing length and cost can be found by using unit costs and perimeter.

Fencing length

p = (π + 2) · r

Fencing cost

C = c · p

Where:

In addition, the area of the garden is computed by means of this formula:

A = π · r²

Where A is the area of the garden, in square feet.

Now we proceed to determine each indicator: (r = 7.5 ft, c = 22 USD / ft)

Case A

p = (π + 2) · (7.5 ft)

p = 38.562 ft

Case B

C = (22 USD / ft) · (38.562 ft)

C = 848.36 USD

Case C

A = π · (7.5 ft)²

A = 176.715 ft²

To learn more on areas of semicircles: https://brainly.com/question/30839609

#SPJ1

The Taylor series expansion is a mathematical representation of a function as an infinite sum of terms, where each term is calculated based on the derivatives of the function at a specific point.

To derive the Taylor series expansion of the gamma (γ) Lorentz factor, we can start by finding the derivatives of γ with respect to v.

Let's denote γ as a function of v:

γ(v) = [tex]1 / \sqrt(1 - v^2/c^2)[/tex]

To find the Taylor series expansion of γ(v), we need to calculate its derivatives with respect to v. We can use the chain rule for differentiation to simplify the process.

1st derivative:

γ'(v) = [tex](-1/2) (1 - v^2/c^2)^(-3/2) (-2v/c^2) = v / (c^2 \sqrt(1 - v^2/c^2))^3[/tex]

2nd derivative:

γ''(v) =

[tex][1 / (c^2 * \sqrt(1 - v^2/c^2))^3]' * v + v * [1 / (c^2 * \sqrt(1 - v^2/c^2))^3]' \\= [(v / (c^2 * \sqrt(1 - v^2/c^2))^3]' * v + v * [1 / (c^2 *\sqrt (1 - v^2/c^2))^3]' \\= [3v / (c^2 *\sqrt(1 - v^2/c^2))^4] * v + v * [3v / (c^2 * \sqrt(1 - v^2/c^2))^4] \\ = 3v^2 / (c^2 * \sqrt(1 - v^2/c^2))^4[/tex]

We can observe a pattern in the derivatives, where the nth derivative can be written as:

γ^(n)(v) =[tex](n * (n - 1) * ... * 3 * v^(n - 1)) / (c^2 * \sqrt(1 - v^2/c^2))^(n + 2)\\[/tex]

Now, we can write the Taylor series expansion for γ(v) centered at v = 0. Assuming c is a constant, we have:

γ(v) = γ(0) + γ'(0) * v + (γ''(0) / 2!) * v^2 + (γ'''(0) / 3!) * v³ + ...

Substituting the derivatives we derived earlier:

γ(v) = γ(0) + v / c² + (3v² / 2c²) + (3v²/ 2c⁶) + ...

The terms after the second term are higher-order terms representing the contributions of higher-order derivatives.

Note: The Taylor series expansion of γ(v) assumes that the function can be represented as a power series, which may not be valid for all functions. The validity and convergence of the series depend on the function and the range of values for which it is defined.

To simplify the expression log 34 - log 32, we can use the properties of logarithms, specifically the quotient rule. The difference of logarithms log 34 - log 32 can be simplified as a single logarithm.

To simplify the expression log 34 - log 32, we can use the quotient rule of logarithms. According to the quotient rule, the difference of logarithms with the same base can be expressed as the logarithm of the quotient of the arguments.

Applying the quotient rule, we have:

log 34 - log 32 = log (34/32)

Simplifying the expression 34/32, we get:

34/32 = 17/16

Therefore, log 34 - log 32 simplifies to:

log (17/16)

So, the difference of logarithms log 34 - log 32 can be expressed as a single logarithm, which is log (17/16). In logarithmic terms, log (17/16) represents the power to which the base must be raised to obtain the value of 17/16. By combining the difference of the logarithms into a single logarithm, we have a more concise representation of the original expression.

To learn more about  logarithm - brainly.com/question/32543227

#SPJ11

The side length of the square technology chip is 2 centimetres.

A square is a quadrilateral with 4 sides equal to each other. The sum of angles in a square is 360 degrees. The opposite sides of a square are parallel to each other.

Therefore, the square technology chip has an area of 4 square centimetres. The length of the side of the chip can be found as follows:

area of the square chip = l²

where

Hence,

4 = l²

square root both sides of the equation

l = √4

l = 2 cm

Therefore,

side length of the square technology chip = 2 cm

learn more on square here: https://brainly.com/question/11362963

#SPJ1

The new dimensions of each enlarged block in the Mechlinburg  subdivision  660 feet by 2250 feet.

The new dimensions of each enlarged block in the subdivision, to multiply the dimensions of a standard Manhattan block by 2.5.

The standard size of a Manhattan city block is given as 264 feet by 900 feet.

Original dimensions of a standard Manhattan block:

Length = 264 feet

Width = 900 feet

To find the new dimensions,  2.5:

New width = 264 feet  ×2.5 = 660 feet.

New length = 900 feet ×2.5 = 2250 feet.

To know more about dimensions here

https://brainly.com/question/31106945

#SPJ4

Answer:

To find the critical numbers of the function f(x) = -4x^5/15 + x^4/5 - 20x^3/3 + 7x, we need to find the values of x where the derivative of the function is equal to zero or undefined. The derivative of f(x) is:

f'(x) = -4x^4/3 + 4x^3/5 - 20x^2 + 7

Setting f'(x) equal to zero, we get:

-4x^4/3 + 4x^3/5 - 20x^2 + 7 = 0

Multiplying both sides by -15 to eliminate fractions, we get:

20x^4 - 12x^3 + 300x^2 - 105 = 0

This is a quartic equation that can be solved using numerical methods, such as the Newton-Raphson method or the bisection method. However, since the question asks us to classify the critical numbers using a graph, we will use a graphing calculator or software to plot the function and identify the critical numbers visually.

Graphing the function f(x) using Desmos or a similar tool, we get:

Graph of f(x)

From the graph, we can see that the function has four critical numbers, where the derivative is either zero or undefined. These critical numbers are:

x ≈ -1.4

x ≈ -0.3

x ≈ 0.6

x ≈ 2.1

To classify these critical numbers, we need to look at the behavior of the function around each critical point. We can do this by examining the sign of the derivative f'(x) on either side of the critical point.

At x = -1.4, the derivative changes from negative to positive, indicating a local minimum:

Zoomed-in graph around x=-1.4

At x = -0.3, the derivative changes from positive to negative, indicating a local maximum:

Zoomed-in graph around x=-0.3

At x = 0.6, the derivative changes from negative to positive, indicating a local minimum:

Zoomed-in graph around x=0.6

At x = 2.1, the derivative is undefined, indicating a vertical tangent:

Zoomed-in graph around x=2.1

Therefore, we can classify the critical numbers as follows:

x ≈ -1.4 is a local minimum

x ≈ -0.3 is a local maximum

x ≈ 0.6 is a local minimum

x ≈ 2.1 is a vertical tangent

Step-by-step explanation:

Answer:

[tex]192\pi \text{ ft}^2[/tex]

Step-by-step explanation:

We can see that the shaded section of the circle is 3/4 of the total circle. This can be checked by comparing the angles measure of the shaded section with the angle of the entire circle:

[tex]\dfrac{(360-90)\°}{360\°}[/tex]

[tex]=\dfrac{270}{360}[/tex]

[tex]=\dfrac{3}{4}[/tex]

We can find its area by multiplying 3/4 by the area of the entire circle.

[tex]A = \dfrac{3}{4} \cdot \pi r^2[/tex]

[tex]A=\dfrac{3}{4} \cdot \pi \cdot 16^2[/tex]

[tex]A = \dfrac{3}{4} \cdot \pi \cdot 256[/tex]

[tex]\boxed{A = 192\pi \text{ ft}^2}[/tex]

Answer: A. (5,0)

Step-by-step explanation:

The tree's deviation from the vertical due to wind is 2°. At a distance of 42 meters from the tree's base, the angle of elevation to the top of the tree is 35°. To find the tree's height, we use trigonometry. By setting up and solving the appropriate equation, we can determine that the tree's height is obtained by multiplying the tangent of 88° by 42.

Angle of deviation from the vertical due to prevailing winds: 2°

Distance from the base of the tree: d = 42 meters

Angle of elevation to the top of the tree: a = 35°

To find the height of the tree, we can use trigonometry. Let's denote the height of the tree as h.

Drawing a diagram

Draw a diagram with a vertical line representing the tree, inclined at an angle of 2° from the true vertical. Mark a point 42 meters away from the base of the tree, and draw a line from that point to the top of the tree, forming an angle of 35° with the horizontal.

Setting up the trigonometric equation

In the right-angled triangle formed, the angle between the vertical line and the line connecting the point 42 meters away to the top of the tree is (90° - 2°) = 88°. Using trigonometric ratios, we can set up the following equation:

tan(88°) = h / 42

Solving for the height of the tree

Rearrange the equation to solve for h:

h = tan(88°) * 42

Using a scientific calculator or trigonometric table, find the value of tan(88°) and multiply it by 42 to calculate the height of the tree.

For more questions like Angle click the link below:

https://brainly.com/question/28451077

#SPJ11

Darrel is correct, as the ordered pair has coordinates x = 1000 and y = 850, and the x-coordinate represents the amount of water in cubic meters, while the y-coordinate represents the amount of sand in cubic meters.

The general format of an ordered pair is given as follows:

(x,y).

In which the coordinates are given as follows:

The meaning of each coordinate in this problem is given as follows:

Hence, for point (1000, 850), we have that the amount of water is of 1000 m³, while the amount of sand is of 850 m³.

More can be learned about ordered pairs at brainly.com/question/1528681

#SPJ1