CPU-On-Demand (CPUd) is a service that offers real-time high-performance computing services. They have one supercomputer that can be accessed through the internet. Their customers send jobs that arrive, on average, every 3 hours, with a standard deviation of 6 hours. The average time it takes to execute each job on the supercomputer is 2 hours.
To calculate the utilization of the supercomputer, we need to determine the percentage of time the supercomputer is busy with processing jobs. Utilization is calculated by dividing the time the supercomputer is busy with jobs by the total time available.
In this case, we can assume that the supercomputer is available 24/7. Therefore, the total time available is 24 hours per day.
The average time between job arrivals is 3 hours, and the average processing time for each job is 2 hours. This means that the supercomputer is idle for 1 hour between each job.
Therefore, the supercomputer is busy for 2 hours for each job, and idle for 1 hour between each job. The utilization of the supercomputer can be calculated as follows:
Utilization = (2 hours / 3 hours) x 100%
Utilization = 66.67%
Therefore, the utilization of the supercomputer is 66.67%, which means that the supercomputer is busy processing jobs for approximately two-thirds of the time.
Learn more about CPU here:
https://brainly.com/question/16254036?
#SPJ11
77. Using the CRC polynomial 1011, compute the CRC code word for the information word, 1011001. Check the division performed at the receiver.
To compute the CRC code word for the information word 1011001 using the CRC polynomial 1011, we need to follow these steps:
Append four zero bits to the end of the information word to create a message of length 11: 10110010000Divide the message by the polynomial using binary long division. This is done by aligning the most significant bit of the polynomial (1) with the leftmost bit of the message (1), and then performing the XOR operation on corresponding bits until we reach the end of the message. We repeat this process until we reach a remainder of less than 4 bits.
The calculation is shown below:
___
1011 | 10110010000
| 1011
|----
1110
1011
----
1001
1011
----
1100
1011
----
110
101
---
he remainder obtained from the division is 1001, which is the CRC code word.4. At the receiver, the same division process is performed, using the received message and the same CRC polynomial. If the remainder obtained is all zeros, the message is assumed to be error-free. If the remainder is non-zero, an error is detected.In this case, we can verify the division performed at the receiver by performing the same calculation using the received message: 10110010000. When we perform the division, we get the same remainder of 1001, which indicates that the message was received correctly.
To learn more about polynomial click on the link below:
brainly.com/question/30904541
#SPJ11
From the list of binary numbers below, select the strings that represent odd numbers in the decimal system. 10000010 11111001 00000000 11111111 10101010 01010101 0101010101010110 0000000011110001 1110001110001110001110101010110 1110001110001110001110101010111
In the decimal system, odd numbers always end in an odd digit (1, 3, 5, 7, or 9). Therefore, to determine if a binary number represents an odd decimal number, we only need to check if the least significant bit (rightmost bit) is 1 or 0.
From the list of binary numbers provided, the following strings represent odd numbers in the decimal system:
11111001
11111111
0000000011110001
1110001110001110001110101010111
These binary numbers have a 1 as the least significant bit, indicating that they represent odd numbers in the decimal system.
The binary strings that represent odd numbers in the decimal system have a least significant bit (LSB) of 1. We can determine which binary strings represent odd numbers by checking their LSB.
To determine which binary strings represent odd numbers in the decimal system, we need to check the least significant bit (LSB) or the rightmost bit of each binary string.
If the LSB is 1, the binary number represents an odd decimal number. Here are the binary strings that represent odd numbers:
1. 11111001
2. 11111111
3. 01010101
4. 0000000011110001
5. 1110001110001110001110101010111
These binary strings have 1 as their least significant bit, which means they represent odd decimal numbers.
Learn more about the least significant bit (LSB) :
https://brainly.com/question/30032657
#SPJ11
I am running a command passing two parameters./a.out csu sacramentoargc will be equal to ______
When running a command with two parameters, such as './a.out csu sacramento', argc (short for argument count) represents the number of arguments passed to the program. In this case, argc will be equal to 3.
What if running a command with two parametersWhen you run a command with two parameters, the first parameter is typically the name of the executable file (in this case, "/a.out"), and the second parameter is an argument or input for the program to use.
In this specific case, the argument being passed is "csu sacramento." When you run this command, the program will execute and use "csu sacramento" as an input.
The specific output or result of the program will depend on what the program does with this input. As for the "argc" variable, it is typically used in C and C++ programming languages to represent the number of arguments passed to a program from the command line.
Therefore, in this case, "argc" will be equal to 2, since there are two parameters being passed to the program.
Learn more about programming at
https://brainly.com/question/27368962
#SPJ11
Malik is studying sociology in an online course but is having trouble connecting with every part of the topic. What can he do to help this?
The thing that Malik can do to help this is to find parts of the subject he can connect with and become more invested through those.
What is the subject about?Malik can attempt a few things to assist him interface with every portion of the subject in his online human science course by:
Go to virtual office hours: Malik can reach out to his teacher to plan virtual office hours or inquire for additional assets to assist him way better get it the subject. Malik can take an interest in online course dialogs or gatherings to listen diverse viewpoints on the subject and inquire questions.
Learn more about subject from
https://brainly.com/question/29757860
#SPJ1
The redundant port allows for a second network connection in case the first fails. Which describes the connection and set-up of redundant networks?
The connection and set-up of redundant networks involve having a redundant port that allows for a second network connection in case the first fails.
The connection and set-up of redundant networks involves creating multiple paths for data to flow through in case one path fails.
This setup enhances network reliability and helps to prevent downtime by providing an alternative pathway for data transmission when the primary connection is disrupted or encounters issues. Redundant networks contribute to improved system resilience and maintain network performance in challenging situations.This is achieved by setting up duplicate network components, such as switches and routers, and using a protocol like Spanning Tree Protocol (STP) to manage the redundancy. With redundant networks, if a primary connection fails, traffic can be automatically rerouted to a secondary connection to ensure that there is no disruption to network connectivity. This type of set-up is particularly important for critical systems or applications that require high availability and uptime.Know more about the Spanning Tree Protocol
https://brainly.com/question/28111068
#SPJ11
Assume the contents of the keys array of a BinarySearchST are as depicted below. Trace the execution of a call to rank(55) by listing out the sequence of values that are assigned to the variable mid in the book's code (given below the array). List out the mid values with commas separating the values. For example, if you thought the values of mid took on the values 8 through 5 in decreasing order, you would write 8,7,6,5
0 1 2 3 4 5 6 7 8 9
4 12 33 38 50 53 61 72 74 94
public int rank(Key key) {
int lo = 0, hi = n-1;
while (lo <= hi) {
int mid = lo + (hi - lo) / 2;
int cmp = key.compareTo(keys[mid]);
if (cmp < 0) hi = mid - 1;
else if (cmp > 0) lo = mid + 1;
else return mid;
}
return lo;
}
The sequence of mid values is 4 and 7, which are assigned to the variable mid in the book's code for rank(55).
What is the sequence of values assigned to the variable mid?You want to trace the execution of a call to rank(55) in a BinarySearchST with the given keys array and list the sequence of values assigned to the variable mid in the book's code.
Here's the provided keys array:
0 1 2 3 4 5 6 7 8 9
4 12 33 38 50 53 61 72 74 94
Following the book's code for rank(55), the sequence of values assigned to the variable mid will be:
1. mid = 0 + (9 - 0) / 2 = 4
2. mid = 5 + (9 - 5) / 2 = 7
So, the sequence of mid values is: 4, 7
Learn more about sequence
brainly.com/question/30262438
#SPJ11
Identify which machine is moore and mealy b. For both machines, starting at state a and given a sequence of one-bit inputs 00100111, what is the final state and output?
The 1st Diagram represents a Mealy Machine
Input = 00100111
Output = 01001011
How to explain the informationThe 1st Diagram represents a Mealy Machine because It depends on Present State and Present input.
The 2nd diagram represents a Moore Machine because It depends on Present State only.
Starting at state A
A--->B--->D--->C--->D--->B--->C--->A--->A
0 1 0 0 1 0 1 1
Input = 00100111
Output = 01001011
Therefore, the Output may be varied depending upon the state machine we are using.
1st Diagram => Mealy Machine
2nd Diagram => More Machine
Learn more about machine on
https://brainly.com/question/388851
#SPJ4
What is a file's read position? Initially, where is the read position when an input file is opened?
A file's read position is the position at which the next read operation from the file will start. Initially, when an input file is opened, the read position is at the beginning of the file.
When a file is opened for reading, the operating system sets the read position to the beginning of the file. This means that the next read operation from the file will read from the beginning of the file. As data is read from the file, the read position advances to the next byte to be read. The read position can be adjusted using file positioning functions, such as fseek() in C. The read position is important to keep track of when working with files, especially when reading from or writing to specific locations within a file.
You can learn more about file's read position at
https://brainly.com/question/31558689
#SPJ11
lockout devices must be substantial enough to prevent removal without the use of excessive force or unusual techniques, such as with the use of bolt cutters or other metal cutting tools. a) true b) false
true. Lockout devices must be substantial in order to prevent removal. This is to ensure the safety of employees who may be exposed to hazardous energy sources.
Nuclear fusion is the process hazardous energy sources by which two or more atomic nuclei join to create new atomic and subatomic particles (neutrons or protons). Energy is either released or absorbed depending on the mass differential between the reactants and products. The fluctuation in nuclear binding energy between the atomic nuclei before and during the reaction is what causes this mass discrepancy. Energy from nuclear fusion is used to power active stars, main sequence stars, and other high-magnitude stars.
Nuclear fusion has the benefit that
1. It might make affordable energy sources available to everyone.
2. It provides a less-emissions-intensive energy option.
3. It continues to function for a very long time.
4. It is a dependable energy source.
Learn more about hazardous energy source here
https://brainly.com/question/28785778
#SPJ11
State whether each of the following is true or false. If false, explain why. a. When String objects are compared using ==, the result is true if the Strings contain the same values. b. A String can be modified after it's created.
The given statement "a. If two String objects are compared with the operator == and their values match, the result is true; otherwise, the result is false. The given statement "b. A String may be changed after creation," is false.
a. When String objects are compared using ==, the result is true if the Strings are referencing the same object, not if they contain the same values. To compare the values of Strings, you should use the equals() method.
b. A String cannot be modified after it's created because it is immutable. Any operation that seems to modify the String will actually create a new String object with the modified content.
When comparing String objects, use the equals() method to compare their values, and remember that Strings are immutable, so they cannot be modified after they are created.
To know more about String objects visit:
https://brainly.com/question/28566541
#SPJ11
A technician is checking a customer's wireless network performance and has determined it was using 802.11g. The technician's recommendation is for the customer to upgrade to 802.11ac. Which of the following is the BEST reason to upgrade?
A. Less attenuation
B. Improved performance
C. 802.11g uses older technology
D. More overlapping channels
The main benefit of upgrading is B. improved performance, including higher data transfer rates and better overall network efficiency.
What is the main benefit of upgrading a customer's wireless network from 802.11g to 802.11ac?"Which of the following is the BEST reason for a technician to recommend upgrading a customer's wireless network performance from 802.11g to 802.11ac?"
Your answer: B. Improved performance
Upgrading to 802.11ac from 802.11g will provide the customer with improved performance in terms of higher data transfer rates and better overall network efficiency.
This is the best reason for the technician's recommendation to upgrade the customer's wireless network performance.
Learn more about upgrading
brainly.com/question/3638683
#SPJ11
what is the system that connects application repositories, systems, and it environments in a way that allows access and exchange of data over a network by multiple devices and locations called? answer integration instance awareness high availability encryption
The system that connects application repositories, systems, and IT environments in a way that allows access and exchange of data over a network by multiple devices and locations is called integration.
To enable secure and effective communication between various systems and settings, it incorporates instance awareness, high availability, and encryption.App repositories are collections of installable programmes for programming languages like Android. The Apple's App Store, and the free and open-source F-Droid Android app repository are a few examples of commonly used app repositories.Software packages are kept in a repository, sometimes known as a repo. Along with metadata, a table of contents is frequently kept. Usually, source code, version control, or repository administrators are in charge of running a software repository. Package managers enable the automatic installation and updating of repositories, often known as "packages."
learn more about application repositories here:
https://brainly.com/question/29540011
#SPJ11
Pointers: What does a REFERENCE type refer to? (similar to pointer but not the same)
A reference type in C++ refers to an alias for an existing variable, similar to a pointer but with different syntax.
Unlike a pointer, a reference cannot be null and cannot be reassigned to refer to a different object once initialized.
Additionally, the syntax for working with references is different than for pointers, making it easier to read and write code that uses them.
References are commonly used as function parameters to avoid copying large objects and to modify values of objects passed into a function.
They are also useful for creating alias names for objects, improving code readability and maintainability.
Therefore, a reference type in C++ is a data type that allows for an alias or alternative name to be used for an existing variable in a program.
For more such questions on Reference type:
https://brainly.com/question/3078280
#SPJ11
(tco 9) the is the person who has the overall responsibility for information within a particular system.
The person who has the overall responsibility for information within a particular system is typically referred to as the "System Administrator" or "Information System Manager." They manage, maintain, and ensure the security and integrity of the system's data.
The person who has the overall responsibility for information within a particular system is commonly known as the Information System Owner (ISO). The ISO is responsible for ensuring that the information within the system is appropriately protected and managed throughout its lifecycle. This includes determining the system's security requirements, developing and implementing security policies and procedures, monitoring system activity for potential security breaches, and ensuring that all personnel who have access to the system are properly trained and aware of their responsibilities.
The ISO also ensures that the system meets all relevant legal, regulatory, and contractual requirements. As you can see, the ISO plays a crucial role in ensuring the security and integrity of information within a system, and this responsibility requires a long answer with detailed explanation.
To know more about System Manager visit:-
https://brainly.com/question/19551372
#SPJ11
What is a main characteristic of a dynamic programming algorithm?
A main characteristic of a dynamic programming algorithm is the use of memorization to reduce computation time.
What's dynamic programming?Dynamic programming involves breaking down a complex problem into smaller subproblems, solving each subproblem only once, and storing the results in a table or array. This way, when a subproblem is encountered again, it can be looked up in the table rather than recalculated, saving time and improving efficiency.
Additionally, dynamic programming algorithms often rely on optimal substructure, meaning that the optimal solution to a problem can be found by combining the optimal solutions to its smaller subproblems. This allows for efficient solutions to problems that may have exponential time complexity if solved through brute force methods.
Overall, dynamic programming is a powerful technique for solving optimization problems and can greatly improve algorithm performance.
Learn more about dynamic programming at
https://brainly.com/question/30868654
#SPJ11
30. Draw a half-adder using only NAND gates.
A half-adder is a digital circuit that performs binary addition on two input bits, generating a sum and a carry output. To create a half-adder using only NAND gates, you'll need four NAND gates in total: two for the sum output and two for the carry output.
1. First, you need to implement an XOR gate (for the sum) using NAND gates. Connect the outputs of two NAND gates (A and B) to the inputs of a third NAND gate (C). Connect one input of A to input bit X and one input of B to input bit Y. Then, connect the other input of A to Y and the other input of B to X.
2. The output of the third NAND gate (C) is the XOR of the two input bits, representing the sum.
3. Next, implement an AND gate (for the carry) using two NAND gates (D and E). Connect both inputs of D to input bit X and both inputs of E to input bit Y. Connect the outputs of D and E to the inputs of NAND gate F.
4. The output of the third NAND gate (F) is the carry bit, which indicates if there's a carry-over to the next bit when adding the two input bits.
With this configuration, you've successfully created a half-adder circuit using only NAND gates.
learn more about half-adder here:
https://brainly.com/question/15865393
#SPJ11
How do you Test/ Validate for Monitoring of Jobs?
Testing and validating the monitoring of jobs is a critical aspect of ensuring that they are running correctly and efficiently. The first step in this process is to define the key performance indicators (KPIs) that are important for monitoring job performance
The steps to Validate for Monitoring of JobsTo test and validate the monitoring of jobs, you should follow these steps:
1. Define goals: Clearly outline the objectives of job monitoring, such as improving efficiency or tracking job progress.
2. Identify metrics: Determine the key performance indicators (KPIs) you'll use to evaluate job performance, like completion rate or processing time.
3. Establish a baseline: Collect initial data on job performance to serve as a benchmark for future comparisons.
4. Implement monitoring tools: Choose appropriate tools or software to track the specified metrics and collect data.
5. Test for accuracy: Ensure the monitoring tools accurately capture and report the desired metrics by comparing their results with manual measurements or other trusted sources.
6. Analyze data: Examine the collected data to identify trends, inefficiencies, or areas for improvement.
7. Adjust and optimize: Make necessary changes to job processes or monitoring tools based on your analysis.
8. Validate improvements: Compare the adjusted job performance data against the baseline to confirm that the desired improvements have been achieved.
9. Iterate: Continue testing, analyzing, and adjusting as needed to optimize job monitoring and performance over time.
Learn more about Monitoring of Jobs at
https://brainly.com/question/31661475
#SPJ11
ursa major solar is adding objects to a custom report type. how many objects, maximum, can be added to this report type?
The maximum number of objects that can be added to a custom report type in Ursa Major Solar is 100.
When creating a custom report type in Ursa Major Solar, users can add objects to the report type to define the data that will be displayed in the report.
The maximum number of objects that can be added to a custom report type is 100.
This limit ensures that reports remain manageable and easy to understand.
If users need to display more data than can fit in a single report type, they can create additional report types or use filters to refine the data displayed in a single report type.
To know more about Ursa Major Solar visit:
brainly.com/question/30169607
#SPJ11
Given the following function. To change the function to return the product instead of the sum, how many lines of code need to be changed? int Calculato(int aint b) {
retum a + b }
Int main cout << Calculate(3, 4). cout << Calculate (5. 2) cout << Calculate(6, 7). return 0 }
a. 1 b. 2 c. 3 d. 4
To change the function to return the product instead of the sum, only one line of code needs to be changed.
Currently, the function is adding the two input parameters (a and b) and returning the result. To change it to return the product, we just need to replace the '+' operator with the '*' operator.
Therefore, the new function would be:
int Calculate(int a, int b) {
return a * b;
}
Only the '+' operator needs to be replaced with '*' operator in the above code. Hence, only one line of code needs to be changed.
The answer is (a) 1.
To know more about parameters visit:
https://brainly.com/question/30046542
#SPJ11
Which of the following must be performed prior to creating a spanned, striped, or mirrored volume on unallocated space in Windows?
Question 8 options:
a.Shrink each disk volume to an equal size.
b.Format the separate disks using the NTFS file system.
c.Assign drive letters to each of the separate disks.
d.Convert basic disks to dynamic disks.
The following task must be performed prior to creating a spanned, striped, or mirrored volume on unallocated space in Windows :
d. Convert basic disks to dynamic disks.
Before creating a spanned, striped, or mirrored volume, you need to convert basic disks to dynamic disks in Windows. This enables more advanced storage management and features, such as the ability to create the mentioned volume types.
Shrinking each disk volume to an equal size is not necessary when creating these types of volumes, as Windows will automatically allocate space across the disks based on their available capacity.
Assigning drive letters to each of the separate disks may be necessary after the volume is created, but it is not a requirement prior to creating the volume.
To learn more about Windows visit : https://brainly.com/question/27764853
#SPJ11
A receiving host has failed to receive all the segments that it should acknowledge. What can the host do to improve the reliability of this communication session?
The reliability issues persist, the receiving host may need to switch to a different protocol or technology that is better suited for the communication session.
If a receiving host has failed to receive all the segments that it should acknowledge, there are several things that can be done to improve the reliability of the communication session:
Request retransmission:
The receiving host can request retransmission of the missing segments from the sender.
This can be done using mechanisms like the Transmission Control Protocol (TCP) retransmission mechanism, which will automatically request retransmission of lost packets.
Increase timeout values:
The receiving host can increase the timeout values for receiving acknowledgments from the sender.
This will allow the receiving host to wait longer for acknowledgments and reduce the likelihood of missed segments.
Increase the size of the receive buffer:
The receiving host can increase the size of the receive buffer to reduce the likelihood of buffer overflow and dropped segments.
Check for errors in the network:
The receiving host can check for errors in the network, such as packet loss or congestion, that may be causing the missing segments.
Use a different protocol or technology:
TCP to User Datagram Protocol (UDP) may improve the speed of the communication session, but at the cost of reliability.
For similar questions on communication session
https://brainly.com/question/17227427
#SPJ11
which of the following is nota reason to use functions?group of answer choicesto make the code run fasterto improve code readabilityto avoid writing redundant codeto support modular development
The answer is "to make the code run faster". While functions can improve code efficiency, their primary purposes are to improve code readability and maintainability, avoid redundancy, and support modular development.
As a method of software design, modular programming places an emphasis on breaking down a program's functionality into independent, swappable modules, each of which is equipped with the tools needed to carry out just one particular function.
The components that the module offers and needs are expressed in the module interface. Other modules are capable of detecting the items defined in the interface. The functional code corresponding to the interface elements declared in the implementation is present. Programmes that are organised and object-oriented are closely related to modular programmes. all of which date back to the 1960s and have the common objective of making it easier to build huge software programmes and systems by dividing them into smaller bits.
learn more about modular development here:
https://brainly.com/question/28114556
#SPJ11
5.23 LAB: Adjust values in a list by normalizing PYTHON
When analyzing data sets, such as data for human heights or for human weights, a common step is to adjust the data. This can be done by normalizing to values between 0 and 1, or throwing away outliers.
Write a program that first gets a list of integers from input. The input begins with an integer indicating the number of integers that follow. Then, adjust each integer in the list by subtracting the smallest value from all the integers.
Ex: If the input is:
5
30
50
10
70
65
the output is:
20
40
0
60
55
The 5 indicates that there are five integers in the list, namely 30, 50, 10, 70, and 65. The smallest value in the list is 10, so the program subtracts 10 from all integers in the list.
Adjust values in a list by normalizing and handling outliers. For the given example input "5 \n 30 \n 50 \n 10 \n 70 \n 65", the output will be "20 40 0 60 55".
To adjust values in a list by normalizing and handling outliers, follow these steps:
1. Read the input, starting with an integer indicating the number of integers that follow.
2. Store the integers in a list.
3. Find the smallest integer in the list.
4. Subtract the smallest integer from all the integers in the list.
5. Print the adjusted integers as output.
Here's an example in Python:
```python
# Step 1: Read the input
n = int(input())
numbers = [int(input()) for _ in range(n)]
# Step 2: Store the integers in a list (already done in the previous step)
# Step 3: Find the smallest integer in the list
min_value = min(numbers)
# Step 4: Subtract the smallest integer from all the integers in the list
adjusted_numbers = [num - min_value for num in numbers]
# Step 5: Print the adjusted integers as output
for num in adjusted_numbers:
print(num, end=' ')
```
For the given example input "5 \n 30 \n 50 \n 10 \n 70 \n 65", the output will be "20 40 0 60 55".
Learn more about outliers: https://brainly.com/question/24123584
#SPJ1
someone pls help me w this
The professional networking tips are matched to the relvant scenario accordingly.
How do the above pairs of information match?How do the above match:
Prepare an introduction - Indra makes an &vator talk to a contact.Pay full attention - Denzil listens to a contact at an event and asks many questönsAttend industry events- Ingrid prefers to meet people in person.Note that professional networking is very crucial to the growth and sustainability of any business. It helps to create strategic relationships and identify entities who share common values and interrsts.
Learn more about professional networking at:
https://brainly.com/question/5897341
#SPJ1
The application of commonly used or agreed upon methods of presentation or use to permit efficiency is part of __________.
Standardization refers to the process of establishing a set of rules or guidelines that ensure consistency and interoperability in a particular domain. The goal of standardization is to promote efficiency, interoperability, and safety by creating a common language and set of practices that are widely accepted and adopted by all relevant parties.
In the context of technology, standardization can take many forms, such as: Standardization of hardware components: This involves the development and implementation of common standards for hardware components such as connectors, power supplies, and form factors to ensure that devices from different manufacturers are compatible with each other.Standardization of software interfaces: This involves the development and implementation of common APIs (application programming interfaces) and other software interfaces to ensure that different software systems can communicate with each other effectively.Standardization of data formats: This involves the development and implementation of common data formats and protocols to ensure that data can be exchanged between different systems without loss of information.
Learn more about Standardization here
https://brainly.com/question/15287326
#SPJ11
suppose you have a personal computer that has reached the end of life and you plan to purchase a replacement. once you have purchased the new computer and transferred your files, there is no need to keep the old computer. what is the best method of disposal for the computer.
The best method of disposal for the computer will be Donation method.
Explaning the BEST Disposal methodsThere are several ways of disposing used items but I have handpicked the ones mostly applicable to computers. They are listed below:
Recycling: Recycling is a popular and environmentally responsible method of disposing of old computer equipment. Many cities have e-waste recycling programs that allow residents to drop off their old computers for safe disposal. Recycling ensures that the components of the computer are reused or disposed of in a way that does not harm the environment.Donation: Another option is to donate old computer equipment to schools, non-profits, or other organizations that could use it. Many schools or non-profits may be willing to accept old computers that are still in good working condition.Learn more about recycling here:
https://brainly.com/question/2055088
#SPJ4
Which of the following applications is the least sensitive to network delays?Streaming videoVoIPInteractive gamesFile Transfer
Out of the given options, File Transfer is the least sensitive to network delays.
File Transfer is the least sensitive one because it doesn't require real-time communication or interaction between users. However, it is important to note that the speed of the file transfer may be affected by network delays.
What is Network Delay?
Network delay is the time it takes for data to travel from its source to its destination across a network. It is influenced by factors such as the distance between the sender and receiver, the number of nodes or routers the data must pass through, and the speed of the network connection. Network delay can impact the performance and responsiveness of applications that rely on real-time communication or fast data transfer.
Learn more about File Transfer: https://brainly.com/question/30055668
#SPJ11
Testing a program can...
A. ... show the presence of bugs, but can never show their absence.
B. ... show the presence of bugs and ensure that the code is without bugs.
C. ... not show the presence of bugs but can always show their absence.
D. ... ensure a bug free code.
A. Testing a program can show the presence of bugs, but it can never show their absence. Testing helps to identify and locate errors and defects in the program, but it cannot guarantee that there are no bugs remaining in the code.
Testing is an essential part of the software development process, and it is used to identify and locate bugs or errors in the software. However, no matter how much testing is done, it is impossible to prove that there are no bugs in the software. This is because testing can only demonstrate the presence of bugs, but it cannot prove that there are no bugs at all. Testing can help to improve the quality of the software by identifying and fixing as many bugs as possible before the software is released to the public. However, it is important to recognize that there may still be some bugs present in the software that have not been identified through testing. Therefore, testing should be seen as a valuable tool for identifying potential problems, but it cannot guarantee a bug-free code.
Learn more about software here-
https://brainly.com/question/985406
#SPJ11
What would you use in order to determine which of your suppliers has the best and worst records for meeting your production schedules? tps mis crm dss ups
By utilizing a combination of TPS, MIS, CRM, DSS, and UPS systems, you would be able to determine which of your suppliers has the best and worst records for meeting your production schedules.
To determine which of your suppliers has the best and worst records for meeting your production schedules, you would need to use a combination of several tools and systems.
Firstly, you could utilize a TPS (Transaction Processing System) to track the delivery times and quantities of the materials received from each supplier. This would provide you with a clear picture of which suppliers consistently deliver on time and which ones struggle to meet deadlines. Secondly, you could use a MIS (Management Information System) to gather data on the lead times and delivery performance of each supplier. This information could be used to compare and evaluate the suppliers' performance against each other. Thirdly, a CRM (Customer Relationship Management) system could be used to maintain a history of all communications with the suppliers. This would help to identify any recurring issues or trends that could be affecting their delivery times. Finally, a DSS (Decision Support System) could be used to analyze all of the data gathered from the various systems and provide insights into which suppliers are performing best and worst.Know more about the Management Information System
https://brainly.com/question/11768396
#SPJ11
What does SJF (Shorter job first) mean?
SJF stands for Shortest Job First. It is a scheduling algorithm used in operating systems, where the process with the smallest execution time is scheduled for execution first.
This algorithm is based on the assumption that shorter processes are completed faster than longer processes, and thus, it minimizes the average waiting time and turnaround time of processes. The SJF algorithm can be preemptive or non-preemptive. In the preemptive SJF algorithm, the scheduler can preempt the currently running process if a new process arrives with a shorter execution time.
In contrast, the non-preemptive SJF algorithm waits for the currently running process to complete before scheduling the process with the shortest execution time. The SJF algorithm is commonly used in batch systems, where the entire job is scheduled for execution at once, and interactive systems, where short tasks are given priority over long tasks to improve system responsiveness.
You can learn more about scheduling algorithm at
https://brainly.com/question/26639214
#SPJ11