Answer:
Sedimentation: Sedimentation is the process of allowing particles in suspension in water to settle out of the suspension under the effect of gravity.Decantation: Decantation is a process for the separation of mixtures of immiscible liquids or of a liquid and a solid mixturehope u liked the answer :)
What is the shape of SiH2O
Answer:
follow the above attachment.
Explanation:
hope this will help...
describe the components of a molecule whose atoms are joined by covalent bonds.
Answer:
nonmetal
Explanation:
In a covalent bond, the atoms bond by sharing electrons. Covalent bonds usually occur between nonmetals. For example, in water (H2O) each hydrogen (H) and oxygen (O) share a pair of electrons to make a molecule of two hydrogen atoms single bonded to a single oxygen atom.
Which element represents magnetic properties?
Answer:Demagnetizing a magnet is also possible. Only a few substances are ferromagnetic; the most common ones are iron, cobalt and nickel and their alloys. The rare-earth metals neodymium and samarium are less common examples.
Explanation;
Consider Zn + 2HCl → ZnCl2 + H2 (g). If 0.30 mol Zn reacts with HCl, how many grams of HCl are needed?
Answer:
22 grams
Explanation:
Zn + 2HCl → ZnCl2 + H2
The first step to answering this question is to calculate the amount of moles of HCl needed. We do this by multiplying the coefficient of HCl in the equation over the coefficient of Zn.
0.30mol × [tex]\frac{2}{1}[/tex] = 0.60 mol HCl
Now, to figure out how many grams we must multiply the amount of moles of HCl by it's molar mass. This molar mass can be found by adding the molar masses of all the elements in HCl.
0.60mol × 36.46 g/mol = 21.87g
Using proper sig figs, 22 grams of HCl are required for this reaction.
11) What volume will 0.75 mol of Oxygen gas (O2) occupy at 298 K and a pressure of 52.7 kPa?
Answer:
Volume = 35.3L
Explanation:
Use Ideal Gas Law (PV=nRT) and isolate for V (volume) by dividing both sides by P (pressure). You will then get the eqaution listed below and you can solve by using the method I used below.
V = nRT/P
V = (0.75kPa)(8.314)(298K)/(52.7kPa)
V = 1858.179/52.7
V = 35.3L
Which one item of the list below does not describe part of beta decay?
A. The nucleus of the atom is unstable.
B. A neutron turns into a proton.
C. A proton turns into an electron.
D. An electron is ejected from the nucleus.
Answer:
C
Explanation:
When Beta decay happens, the atomic number of an element goes up, and that means there is an extra proton. A is not the answer because unstable atoms cause decay. B is also not correct because this is what happens in Beta decay: a neutron becomes a proton. D is not correct because an electron is actually emitted from the nucleus.
Convert 23 grams of nitrogen dioxide into moles of nitrogen dioxide.
Answer:
We have to convert the following into moles.
(a) 32 g of oxygen gas = 1 mole
1 gram of oxygen gas = 1/32 mole
Given that 12 g of oxygen gas
No: of moles = given mass / molar mass
= 12 / 32 = 0.375 mole
(b) 18 g of water = 1 mole
1 gram of water = 1/18 mole
Given that 20 g of water
No: of moles = given mass / molar mass
= 20 / 18 = 1.111 mole
(c) 44 g of carbon dioxide = 1 mole
1 gram of CO2 = 1/44 mole
Given that 22 g of carbon dioxide
No: of moles = given mass / molar mass
= 22 / 44 = 0.5 mole
Explanation:
Consider the energy transfers and transformations that occur when a person rides a bicycle. Describe thi
process by selecting the correct options from the drop-down menus.
Chemical energy is transformed into
energy in the person's muscles.
Kinetic energy is
from the person's legs to the pedals.
Kinetic energy is
thermal energy due to friction when the wheels get warm.
DONE
Answer:
b,a,b
Explanation:
The energy transfers and transformations that occur are kinetic energy is from the person's legs to the pedals and thermal energy due to friction when the wheels get warm.
What is law of conservation of energy?The law of conservation of energy states that energy can neither be created nor destroyed but can be converted from one form to another.
The energy transfers and transformations that occur when a person rides a bicycle are:
Kinetic energy is from the person's legs to the pedals Thermal energy due to friction when the wheels get warmLearn more about conservation of energy here: https://brainly.com/question/24772394
#SPJ6
A chemist performs the following reaction:
PCl5 (aq) + 4H2O (l) ⟶ H3PO4 (aq) + 5HCl (aq)
If she has 26.4 g of PCl5, what mass of water should she react to use up all of the
PCl5?
Looking for an in-depth step by step, please
Answer:
9.17 g
Explanation:
1) Calculate mols of PCl5
PCl5 (aq) + 4H2O (l) ⟶ H3PO4 (aq) + 5HCl (aq)
Mass of PCl5: 26.5g
Molar Mass of PCl5 208.24g/mol
Mol of PCl5 = Mass PCl5 /Molar mass PCl5 = 26.5g / (208.24g/mol) = 0.127257011 mol
2) Calculate mols of water needed to react
Mols of H2O per 1 Mols of PCl5 = 4 (because 4 water is needed to Phosphorus pentachloride).
Mols of H2O = Mol of PCl5 * 4 = 0.127257011 * 4 = 0.509028044 mols
3) Calculate Grams of water needed to react
Mols of H2O = 0.509028044 mols
Molar Mass of H2O = 18.015 g/mol
Mass of H2O = Mols of H2O * Molar Mass of H2O
= 0.509028044 mols* 18.015 g/mol = 9.17014021 g
sf = 3
9.17 g
Which of the following is used for purification of water?
a) Sodium bicarbonate
b) Alum
c) Copper sulphate
d) Sodium Hydroxide
A. Sodium bicarbonate is a water treatment method used to soften water (removing calcium and magnesium impurities from it) in older water softener systems. The process uses a chemical reaction to convert the calcium hydroxide (or magnesium hydroxide) into calcium carbonate, which isn't water soluble.
B. Alum, also known as potassium aluminum sulfate, can be used to purify water. ... Add 1.4 ounces of alum powder to the contaminated water in the reaction vessel and carefully stir the mixture with the stirring stick for at least five minutes. Sediment will form as the phosphorous in the water binds with the alum powder.
C. If Copper sulphate crystals are added to water it is called 'hydrated copper sulphate solution'.
If it is added to cold water then:-
it is more saturated
but if it is added to warm water then:-
it is unsaturated
and it turns bluish in colour in dissolving in water
D. Sodium hydroxide is used in the treatment of drinking water to raise the pH of the water to a level that minimizes the corrosion. Raising the pH remains one of the most effective methods for reducing lead corrosion and minimizing lead levels in drinking water.
when a 2.71 mL sample of a 0.493 M aqueous nitrous acid solution is tutorage with a 0.308 M aqueous sodium hydroxide solution, what is the ph after 65.1 mL of sodium hydroxide have been added?
Answer:
0.10 M NaHA
Explanation:
Solutions which can conduct electricity must contain:
atoms
minerals
molecules
ions
Answer
Ions
Explanation
Isomers are molecules that have the SAME molecular formula, but their atoms are bonded in a different way. Draw the 5 isomers of cyclopentane, C5H10 using Line Structural Diagrams only.
Answer:
1.methylcyclobutane
2.1-pentene
3.2-pentene(which can be Cis or Trans)
4.1,3-dimethylcyclopropane
5.ethylcylcopropane
I think these are it? I can't think of any other ones.
one of the biggest dangers of storms that produce heavy rains or storm surges is ___.
A. Low Temperatures
B. Flooding
Answer:
B. Flooding
Explanation:
Flooding can be caused by heavy rains/storm surges. Hope this helped!
A 2.50-mL aliquot of a solution that contains 6.4 ppm iron(III) is treated with an appropriate excess of KSCN to form the Fe(SCN)21 complex and diluted to 50.0 mL. What is the absorbance of the resulting solution at 580 nm in a 2.50-cm cell
Answer:
In the final solution, the concentration of sucrose is 0.126 M
Explanation:
The number of moles of solute in the volume taken from the more concentrated solution will be equal to the number of moles of solute in the diluted solution. Then, the concentration of the first solution can be calculated using the following equation:
Ci · Vi = Cf · Vf
Where:
Ci = concentration of the original solution
Vi = volume of the solution taken to prepare the more diluted solution.
Cf = concentration of the more diluted solution.
Vf = volume of the more diluted solution.
For the first dillution:
26.6 ml · 2.50 M = 50.0 ml · Cf
Cf = 26.6 ml · 2.50 M / 50.0 ml
Cf = 1.33 M
For the second dilution:
16.0 ml · 1.33 M = 45.0 ml · Cf
Cf = 16.0 ml · 1.33 M / 45.0 ml
Cf = 0.473 M
For the third dilution:
20.0 ml · 0.473 M = 75.0 ml · Cf
Cf = 20.0 ml · 0.473 M / 75.0 ml
Cf = 0.126 M
In the final solution, the concentration of sucrose is 0.126 M
hope that help
hope you have a great Christmas
mark me brinilylist
what is meaning of coordination bond?
Answer:
Coordinate-bond meaning
A type of covalent bond in which both the shared electrons are contributed by one of the two atoms. ... The definition of a coordinate bond is a chemical bond between two atoms when one of the atoms shares a pair of electrons.
Explanation:
Explanation:
is a covalent bond in the sharing of electron pair equally between two atoms in which each atom contribute an electron.
it is form when atomic orbitals of atoms each containing an unpaired electron overlap to share the pair of electrons.
A car goes from 0 to 100m/s in 10s what is that acceleration
Answer:
10m\s
Explanation:
given
initial velocity(u)=0
final velocity (v)=100
acceleration(a)=?
we know,
acceleration = v-u/t
= 100-0\10
= 10 m\s
Oxygen gas is at temperature of 40c when it occupies a volume of 2.3 liters. To what temperature should it be raised to occupy a volume of 6.5 liters?
Answer:
884.6k
Explanation:
A gas sample occupies 8.76 L at a temperature of 37°C. What is
the volume if the temperature is lowered to 0°C at constant
pressure?
Answer:
A.
Explanation:
What law of motion corresponds with this statement?
"A rifle kicks."
first law
third law
second law
Answer:
3rd lawl
Explanation:
a rifle kick is when you fire a projectile and you feel a force pushing against your hand. Rifles normally have heavier projectiles so there is more force pushing back against you. example, if you were sitting on a spinny chair with wheeles and your friend is sitting on another, and you push each other while on the chair, you will both go backward, but the lighter person will go back more. for every action, there is an equal and opposite reaction
that is the third law, also said as: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body."
What is a scientific law?
Answer:
Scientific laws or laws of science are statements, based on repeated experiments or observations, that describe or predict a range of natural phenomena. The term law has diverse usage in many cases across all fields of natural science.
Explanation:
I hope this helps
Answer:
Scientific laws or laws of science are statements, based on repeated experiments or observations, that describe or predict a range of natural phenomena. Scientific law differs from scientific theory. The main difference between a law and a theory is that a theory tries to explain the reasoning behind something that occurs in nature, whereas scientific laws are just descriptive accounts of how something occurs in nature.
Which transition could represent an atom that emits a photon with 10.2 eVeV of energy?
Which functional group does the molecule below have?
Answer:
B
Explanation:
We can see here that the functional group that the molecule have is: B. Carbonyl
What is a functional group?A functional group is a specific group of atoms or bonds within a molecule that is responsible for the characteristic chemical reactions and properties of that molecule. Functional groups are the parts of organic molecules that determine their reactivity and the types of chemical reactions they can undergo.
In organic chemistry, functional groups play a crucial role in understanding the structure and behavior of molecules. Different functional groups confer distinct properties to molecules, influencing their physical properties, solubility, acidity or basicity, and interactions with other molecules.
Learn more about functional group on https://brainly.com/question/10058230
#SPJ2
A student borrows $10,000 from a bank but ends up paying $13,000 on the
loan over the next five years. How much interest did the student pay?
The student paid an interest of $3,000 over the next five years.
HOW TO CALCULATE INTEREST:
The interest on a borrowed amount of money can be calculated by subtracting the principal from the amount paid over time. That is;
Interest = principal - amount
According to this question, a student borrows $10,000 from a bank but ends up paying $13,000. This means that the principal is $10,000 while the amount is $13,000. The interest is calculated thus;
Interest = $13,000 - $10,000
Interest = $3,000
Therefore, the student paid an interest of $3,000 over the next five years.
Learn more about interest at: https://brainly.com/question/4626564
Please write out the balanced chemical equations for the following
reactions.
**Ensure you write the states of the reactants and products.**
• zirconium chloride reacts with scandium dichromate
Answer: Super idol
Explanation:
chinese malapoks
A 0.1 M NaCl solution and a 0.2 M glucose solution are separated by a membrane that is impermeable to these solutes but is permeable to water. What will happen
nothing will happen
if you calculate the water potiential for both solutions
you get 2(0.1)(R)(T) and 1(0.2)(R)(T)
which is the same thing, so its isotonic.
Need Help ASAPPPP!!!!
Answer: For number 8. I think only one if not i'm so sorry also you would need 143. 0914
Explanation:
Answer:
Hello! :p
6.022 × 10^{23} atoms of copper. 143.09 g/molI hope this helps! Thank you so much! :)
Sodium chloride reacts with copper sulfate to produce sodium sulfate and copper chloride.
2NaCl(aq) + CuSO4(aq) → Na2SO4(aq) + CuCl2(s)
+
This equation represents a
O synthesis reaction.
O decomposition reaction.
O single replacement reaction.
O double replacement reaction.
O
Sodium chloride reacts with copper sulfate to produce sodium sulfate and copper chloride.
2NaCl(aq) + CuSO4(aq) → Na2SO4(aq) + CuCl2(s)
+
This equation represents a
O synthesis reaction.
O decomposition reaction.
O single replacement reaction.
O double replacement reaction.
Answer :double replacement reaction
ありがとう！
Sodium chloride reacts with copper sulfate to produce sodium sulfate and copper chloride. This equation represents a double replacement reaction. Therefore, the correct option is option D.
What is double replacement reaction?In a double replacement process, the ions in two input ionic compounds are exchanged for the same ions in two new product compounds. When two reactants swap cations or anions to produce two new products, the process is known as a double replacement reaction.
Double displacement reactions and metathesis reactions are other names for double replacement processes. Double replacement reactions include neutralisation, precipitation, and gas production. Sodium chloride reacts with copper sulfate to produce sodium sulfate and copper chloride. This equation represents a double replacement reaction.
Therefore, the correct option is option D.
To know more about double replacement reaction, here:
https://brainly.com/question/30783535
#SPJ5
How abundant is Polonium in the earth's crust?
Even in pitchblende, polonium is exceedingly rare: 1,000 tons of ore must be treated to yield 40 milligrams of polonium. It has a one-part-in-ten-thousandth-thousandth-thousandth-thousandth-thousandth-thousandth It is found in nature as a byproduct of the radioactive decay of uranium, thorium, and actinium.
Atomic Number: 210
how many sightings of fish in spongebob were there, person who gets it right will get brainliest on god on everything