Answer:
Use bags that are not of plastic and that we can reuse.
Explanation:
To reduce the number of petroleum, people should use everyday things that do not have plastic in their composition. For example, drink water from a flask made of iron, take your mug to the coffee store or use cloth bags. These elements are not disposable, and we can use them multiple times, which leads to a reduction in the consumption of plastic products and the amount of petroleum needed for their production.
help is science, if you don't know the answer just don't put anything /:
Answer:
Light
Explanation:
Light is a good example of invisible particles. We cannot see light particles aka photon. We only know the light is present by the objects we see. Because we can only see objects when light reflects from them on our eyes.
[I could only think of one example if I can remember one more I'll edit it down]
what do you understand by valency electron and valency shell?
Answer:
total no. of electron present in Valency shell is called valency electron ___________________valency shell is that in which last electron is presentformula of preparation of sodium hydroxide
The chemical formula of sodium hydroxide is NaOH, and its molar mass is 40.01 g/mol. It is the alkali salt of sodium, and its structure is shown below:
It is an ionic compound consisting of sodium cation (Na+) and hydroxide (OH-) anion.
Calculate: (5.03 x 109) – (42.6 x 108) =
Answer: x108(5.03x−42.6)
Explanation: Factor 5.03x109−42.6x108
5.03x109−42.6x108
=x108(5.03x−42.6)
1. True or false, phosphorus-33 is an isotope
Explanation:
it's answer is false
hope it helps you
If you put a piece of zinc into a solution of copper (I) sulfate and allow the single replacement reaction to go to completion, how will you know which of the reactants is the limiting reactant? Write the balanced equation, including the states of matter of the reactants and products, to help support your answer.
Explanation:
Reaction of zinc metal in copper sulfate solution.
[tex]\begin{array}{ll}\text { Oxidation : } & \mathrm{Zn}(s) \rightarrow \mathrm{Zn}^{2+}(a q)+2 e^{-}\\\text {Reduction : } & \mathrm{Cu}^{2+}(a q)+2 e^{-} \rightarrow \mathrm{Cu}(s) \\\hline \text { Full Reaction : } & \mathrm{Zn}(s)+\mathrm{Cu}^{2+}(a q) \rightarrow \mathrm{Zn}^{2+}(a q)+\mathrm{Cu}(s)\end{array}[/tex]
Zinc is listed above copper on the activity series, this means that zinc is more easily oxidized than copper. That is why copper(II) ions can act as an oxidizing agent when put into contact with zinc metal. Ions of any metal that is below zinc, such as lead or silver, would oxidize the zinc in a similar reaction.
A 30 kg wrecking ball was dropped from different heights.
30 kg Wrecking ball
Height dropped
Speed at impact
Energy at impact
Distance Object is moved
Trial 1
5m
9.9 m/s
1470 J
0 cm
Trial 2
7m
11.71 m/s
2058 J
3 cm
Trial 3
15m
17.15 m/s
4410 J
55 cm
Trial 4
25m
22.14 m/s
7350 J
120 cm
What is the relationship between drop height and energy at impact?
Will give brainliest
What type of bond is formed between atoms of a molecule of the product of this reaction? How can you determine which type of bond is formed between these atoms?
2 H2(g) + O2(g)⇒ 2 H2O(l)
Answer:
Explanation:
A decomposition reaction occurs when one reactant breaks down into two or more products. This can be represented by the general equation: AB → A + B. Examples of decomposition reactions include the breakdown of hydrogen peroxide to water and oxygen, and the breakdown of water to hydrogen and oxygen.
Answer:
Covalent bond
Explanation: Hydrogen and Oxygen are both non-metals, with a low difference in electronegativity. They will share electrons.
Can someone please help me with this?-- 18 pts!
What is true about the latent heat of condensation for a substance?
Select all that apply.
The latent heat of condensation will have the same absolute value as the latent heat of vaporization.
The latent heat of condensation will have the same absolute value as the latent heat of solidification.
The latent heat of condensation is a characteristic property that can be used to identify a substance.
The latent heat of condensation will be negative.
The latent heat of condensation is the same for all substances under the same conditions.
The latent heat of condensation will be positive.
Happy Holidays!!
Answer:
latent heat of condensation will have the same absolute value as the latent heat of vaporization. The latent heat of condensation will be negative. The latent heat of condensation is a characteristic property that can be used to identify a substance.
Explanation:
Answer:
energy absorbed or released by a substance during a change in its physical state (phase) that occurs without changing its temperature.
Explanation:
when 3.18 g of copper (||) oxide were carefully heated in a stream of dry hydrogen, 2.54 g of copper and 0.72 g of water were formed determine the number of moles of hydrogen atoms which combine with one mole of oxygen atoms
Answer:
the number of moles of atom is 0.91584
#1 - What is a pure substance? *
1 point
two or more atoms held together by chemical bonds
the attractive force that holds atoms together
a sample of matter that has specific chemical and physical properties
a pure substance made up of two or more different types of atoms joined by chemical bonds
#2 - TRUE OF FALSE: Water is a pure substance.
1 point
True
False
#3 - What is an atom? *
1 point
the smallest unit of an element that keeps the properties of that element
the attractive force that holds atoms together
a sample of matter that has specific chemical and physical properties
a pure substance made up of two or more different types of atoms joined by chemical bonds
#4 - What is a molecule? *
1 point
two or more atoms held together by chemical bonds
the attractive force that holds atoms together
a sample of matter that has specific chemical and physical properties
a pure substance made up of two or more different types of atoms joined by chemical bonds
#5 - What is a chemical bond? *
1 point
two or more atoms held together by chemical bonds
the attractive force that holds atoms together
a sample of matter that has specific chemical and physical properties
a pure substance made up of two or more different types of atoms joined by chemical bonds
#6 - TRUE OR FALSE: Molecules are all the same size. *
1 point
True
False
#7 - What is a compound? *
1 point
two or more atoms held together by chemical bonds
the attractive force that holds atoms together
a sample of matter that has specific chemical and physical properties
a pure substance made up of two or more different types of atoms joined by chemical bonds
#8 - TRUE OR FALSE: Compounds never form in a fixed ratio. *
1 point
True
False
#9 - TRUE OR FALSE: The structure of matter at the atomic and molecular levels is too small to observe directly. *
1 point
True
False
#10 - TRUE OR FALSE: A complex molecule may contain a few atoms bonded together. A simple molecule may contain thousands of atoms. *
1 point
True
False
#11 - What is a crystal? *
1 point
two or more atoms held together by chemical bonds
a substance in which the particles are arranged in an orderly, geometric, and repeating pattern
a sample of matter that has specific chemical and physical properties
a pure substance made up of two or more different types of atoms joined by chemical bonds
#12 - TRUE OR FALSE: Diamond and graphite are both made of carbon atoms. *
1 point
True
False
Answer/Explanation:
#1 - A pure substance is either an element or a compound, making it different from a mixture. A sample of matter that has specific chemical and physical properties is the only one that fits here.
#2 - A pure substance is either an element or a compound, making it different from a mixture. Water is a compound, and thus this would be true.
#3 - An atom is the smallest unit of an element that keeps the properties of that element. Just refer to its definition.
#4 - A molecule is two or more atoms held together by chemical bonds . Again, just refer to its definition.
#5 - A chemical bond is the attractive force that holds atoms together . Jus refer to its definition.
#6 - Molecules are most definitely not all the same size, especially given the huge number of them. This would be false.
#7 - A compound is a pure substance made up of two or more different types of atoms joined by chemical bonds . Just refer to its definition.
#8 - Compounds always form in a fixed ratio, so this would be false.
#9 - If by directly, the problem means with the naked eye, this would be true.
#10 - False. It's reversed.
#11 - A crystal is a substance in which the particles are arranged in an orderly, geometric, and repeating pattern . Just refer to its definition.
#12 -True; to be more specific, they are covalent network solids.
How many grams of NaCl would be required
to react with 346 mL of 0.607 M AgNO3
solution?
Answer:
Mass = 12.27 g
Explanation:
Given data:
Mass of NaCl are required = ?
Volume of AgNO₃ = 346 mL (346 mL× 1L/ 1000 mL = 0.346 L)
Molarity of AgNO₃ = 0.607 M
Solution:
Chemical equation:
NaCl + AgNO₃ → NaNO₃ + AgCl
Number of moles of AgNO₃:
Molarity = number of moles / volume in L
0.607 M = number of moles / 0.346 L
number of moles = 0.607 M × 0.346 L
number of moles = 0.21 mol
now we will compare the moles of NaCl and AgNO₃.
AgNO₃ : NaCl
1 : 1
0.21 : 0.21
Mass of NaCl:
Mass = number of moles × molar mass
Mass = 0.21 mol × 58.44 g/mol
Mass = 12.27 g
(30 points) Ahhhhhhh can someone help me :'))
I'm not smart and I don't understand how to solve this problem:
Octane, one of the major components of gasoline, burns in air according to this unbalanced equation:
C₈H₁₈ (l) + O₂ (g) ----> CO₂ (g) +H₂O
The formula balanced is: 2 C₈H₁₈ (l) + 50 O₂ (g) ----> 16 CO₂ (g) + 18 H₂O
a) What volume of O₂ at STP is needed to burn 702g (1.00L) of octane?
b) What volume of O₂ at 18°C and 0.975 atm is needed to burn 702g of octane?
Answer:
a. 137.93 dm3
b. 150.61 L
Answer:
C₈H₁₈
Explanation:
Which diagram shows an element?
Show, in a step by step fashion, your calculations to determine the percent
by volume of a solution that is made by mixing 50 ml of ethanol with 210
ml of water.
The percent by volume of a solution : 19.23%
Further explanationGiven
50 ml of ethanol
210 ml of water
Required
The percent by volume of a solution
Solution
Percent Volume (% v/v) : volume (ml) of solute/100 ml of solution ⇒ ratio of the volume of the solute to total volume of the solution
[tex]\tt \%solute(v/v)=\dfrac{solute~volume}{solution~volume}\times 100\%[/tex]
solute= Ethanol
solvent=water
Solution = solute+solvent
Total volume of the solution :
[tex]\tt =volume~of~Ethanol+solume~of~water\\\\=50~ml+210~ml\\\\=260~ml[/tex]
Percent by volume :
[tex]\tt \%volume=\dfrac{50}{260}\times 100\%\\\\\%volume=19.23\%[/tex]
QUICK
Which of these is a ball and stick model?
How many grams are in 56 L of chlorine gas?
Answer:
Since 1 L equals to 1000 microlitres, and 1 microlitre equals to 1 gram, there are 56 * 1000 = 56000 grams of chlorine gas in 56 L of chlorine gas.
Explanation:
Hope this helped!
PLEASE HELP DUE RIGHT NOW!!!!
(03.06 MC)
Why is a depletion of the ozone layer harmful? (2 points)
Select one:
a. It increases chlorofluorocarbons (CFCs).
b. It allows increased amounts of UV radiation to reach Earth's surface.
c. It increases crop yields.
d. It contaminates ground water.
Answer:
b.
Explanation:
As the ozone layer is essential for nullifying the rays of the sun, without it there would be much more UV radiation.
Need help fast please!
Find the mass of 4.56 mols of LaPO4
Answer:
Mass = 1080.26 g
Explanation:
Given data:
Number of moles of LaPO₄ = 4.56mol
Mass in gram = ?
Solution:
Formula:
Number of moles = mass/molar mass
Molar mass of LaPO₄ = 236.9 g/mol
by putting values,
4.56 mol = mass/ 236.9 g/mol
Mass = 4.56 mol × 236.9 g/mol
Mass = 1080.26 g
Evaluate the carbon dioxide molecule. Explain how to determine if double or triple bonds exist in the molecule.
Answer:
It contain double Bond.
Explanation:
To determine weather the bond is double or triple simply check the electron involved in mutual sharing of an electron if 2 electron takes parts it said to be double or if 3 it said to be triple.
The belief that you lose fat mass in a specific body part by concentrating exercise in that area is known as:
Answer:
Targeted fat loss
Explanation:
Answer:
Spot reduction
Explanation:
<3
Which sentence is a scientific statement?
A.
There is a substance around us that cannot be detected.
B.
Kids should go to school for 12 years.
C.
Experimentation is the best way to obtain knowledge.
D.
Unicorns once existed on Earth.
E.
There are no living things on the Moon.
B. Kids should go to school for 12 years.
What is a scientific statement?Scientific statements are those statements that must be falsifiable which means that able to be proven false while on the other hand, tautology is a statement that is true. The sun revolves around the earth” is an example of scientific statement because this statement can be falsifiable in the light of evidences and researches. Hypothesis is a statement that may be true or false. We can verify it by doing experiments.
So we can conclude that option B is the sentence that represents a scientific statement.
Learn more about scientific here: https://brainly.com/question/17216882
#SPJ1
define effervesence
Answer:
is the getting out of a gas in a water solution or it the property of forming bubbles
how many moles of tin are there in 50 g of tin (II) oxide
Answer:
Moles of tin = 0.37 mol
Explanation:
Given data:
Mass of tin oxide = 50 g
Moles of tin = ?
Solution:
Number of moles of SnO:
Number of moles = mass/molar mass
Number of moles = 50 g/ 134.71 g/mol
Number of moles = 0.37 mol
We can see there is only one mole of Sn is present in one mole of tin oxide.
Thus in 0.37 mol of tin oxide,
0.37 mol × 1 = 0.37 mol of tin
Which of the following would be found ONLY in plant cells
Answer:
chloroplasts, cell walls, or intracellular vacuoles
Explanation:
You didn't list the following, but I'm guessing it is chloroplasts, cell walls, or intracellular vacuoles
When a machine does work, a trade-off occurs. Which of the following best exemplifies this trade-off?
A. A pulley changes the direction of your force, but requires a greater input force.
B. A lever increases output force and the distance the load moves.
C. A wheel and axle increases output force and the distance the load moves.
D. A ramp allows you to decrease force, but requires a greater distance.
Answer:
A
A pulley changes the direction of your force, but requires a greater input force.
Explanation:
A pulley changes the direction of your force, but requires a greater input force when machine does work. so option A is correct.
What is machine ?Any tool that makes work easier is a machine. We can complete tasks with the aid of machines by using less force and energy.
By using a simple machine, you can move anything with less effort, but you have to move it farther to do the same amount of labor.
Our bodies function like machinery. For instance, our arms can be compared to a machine that can be utilized to quickly lift objects.
By using a machine to perform work, either the force or the distance across which the force is delivered may rise, but not both at once. In other words, as one grows, either force or distance, the other must decrease. The force-distance trade off is what is meant by this.
Thus, option A is correct.
To learn more about machine follow the link below;
https://brainly.com/question/3135614
#SPJ6
What are the reactants in a chemical equation located? (20 Points)
A. On the right side of the arrow
B. Below the arrow
C. Above the arrow
D. On the left side of the arrow
on the left side of the arrow
The reactants in the chemical equation located on the left side of the arrow. Option D is correct.
The arrow in the chemical equation represents the direction of the chemical reaction, and it separates the reactants from the products.
A chemical equation is a symbolic representation of a chemical reaction, showing the starting materials (reactants) and the resulting substances (products). The general form of a chemical equation is as follows:
Reactants → Products
Reactants: The reactants are the substances present at the beginning of the chemical reaction. They are the starting materials that undergo a chemical change or reaction to produce new substances. Reactants were written on the left side of the arrow.
Arrow: The arrow in the chemical equation points from the reactants to the products, indicating the direction of the reaction. It symbolizes the transformation of reactants into products during the chemical reaction.
Products: The products are the substances formed as a result of the chemical reaction. They are the new compounds or elements that are produced by rearranging the atoms of the reactants. Products were written on right side of the arrow.
For example, let's consider the combustion of methane (CH₄) in oxygen (O₂) to produce carbon dioxide (CO₂) and water (H₂O):
CH₄ (methane) + 2 O₂ (oxygen) → CO₂ (carbon dioxide) + 2 H₂O (water)
In this chemical equation, methane (CH₄) and oxygen (O₂) are the reactants, and they are located on the left side of the arrow. The products, carbon dioxide (CO₂), and water (H₂O), are located on the right side of the arrow.
Hence, D. is the correct option.
To know more about reactants here
https://brainly.com/question/14449229
#SPJ2
What is causing the Hot Springs to be so hot? What is causing Hot Springs to be so acidic?
Answer:
Hot springs are hot because of geothermal heat. The Hot springs are acidic because hydrogen sulfide and carbon dioxide get in touch with water they evaporate which causes acid.
Explanation:
All matter has both physical and chemical properties.
True or False
Answer:
F
Explanation:
(20 POINTS!!) please help me write a short reference page on chemical bonds (anything helps)
•differentiate the characteristics of ionic and covalent bonds
•summarize the steps and rules for naming IONIC and COVALENT bonds
•describe the role an elements charge has in writing and naming bonds
- how do roman numerals change the process of naming ionic compounds
have a good day :)
Explanation:An ionic bond essentially donates an electron to the other atom participating in the bond, while electrons in a covalent bond are shared equally between the atoms. The only pure covalent bonds occur between identical atoms. ... Ionic bonds form between a metal and a nonmetal. Covalent bonds form between two nonmetals.