Answer:
Antarctica is a desert. It does not rain or snow a lot there. When it snows, the snow does not melt and builds up over many years to make large, thick sheets of ice, called ice sheets.
Explanation:
Which type of reaction to alkenes generally undergo?
Answer:
Two types of reaction
Explanation:
Alkanes undergo only substitution reactions but alkenes and alkynes undergo both substitution and addition reactions
Sodium (Na) has an ionic charge of +1. Sodium forms an ionic bond with Chlorine (Cl) to form table salt. What charge must the chlorine ion have?
PLS ANSWER LEGITIMATLEY! THANKS! WILL MARK BRAINLIEST!
Explanation:
sodium has a positive charge and chlorine has a negative charge a negative and a positive charge you automatically for an ionic bond therefore the chlorine has to have a negative one charge
What is the name of Earth's home galaxy?
The Milky Way
The Elliptical
The Spiral Way
The Irregular
100 points
Answer:
The Milky Way
Explanation:
Answer:
Your answer is the Milky WAy!
Brainliest?
How much heat is given off when 16 g liquid methanol (CH3OH) at its freezing point
changes to solid methanol? (methanol AH+ = 3.16 kJ/mol)
A. 0.79 kJ
B. 0.18 kJ
C. 1.58 kJ
D. 0.36 kJ
Answer:
c. 1.58 KJ
Explanation:
I took the test:)
Answer:
1.58 KJ
Explanation:
The force needed to overcome the attraction among molecules at the surface of a liquid is called?
Answer:
The type of force is known as cohesive force
250 mL of water is collected during a combustion reaction. The temperature in the
room is 23 °C and the pressure is 105 kPa. How many moles of water was collected?
Answer:
0.011 moles
Explanation:
Applying,
PV = nRT.................... Equation 1
Where P = Pressure, V = Volume, n = number of moles, R = Molar gas constant, T = Temperature.
Make n the subject of the equation
n = PV/RT.................. Equation 2
From the question,
Given: P = 105 kPa = (105×0.00986923) = 1.036 atm, V = 250 mL = 0.25 L, T = 23 °C = (273+23) = 296 °C
Constant: R = 0.082 atm.dm³/K.mol
Substitute these values into equation 2
n = (1.036×0.25)/(0.082×296)
n = 0.011 moles
What is the relationship between temperature and volume?
Answer:
Charles's law states that the volume of a given amount of gas is directly proportional to its temperature on the kelvin scale when the pressure is held constant
The volume of a given gas sample is directly proportional to its absolute temperature at constant pressure (Charles's law). The volume of a given amount of gas is inversely proportional to its pressure when temperature is held constant (Boyle's law)
Explanation:
~Hope this helps
what is a recessive allele in a genotype is represented by pleaseee helpp
Cyclohexane (C6H12) is found in gasoline. It is burned for fuel in a combustion reaction. The unbalanced combustion reaction for octane is shown below. C6H12 + O2 + CO2 + H2O + heat When the reaction is balanced, how many carbon dioxide molecules are produced for every cyclohexane molecule burned? O A1 O B. 9 O c. 6 O D. 3
Answer:
6
Explanation:
C[tex]_6[/tex]H[tex]_{12}[/tex] + O[tex]_2[/tex] → CO[tex]_2[/tex] +H[tex]_2[/tex]O + heat can be balanced as C[tex]_6[/tex]H[tex]_{12}[/tex] + 6O[tex]_2[/tex] → 6CO[tex]_2[/tex] +6 H[tex]_2[/tex]O + heat. Therefore, the correct option is option C.
What is combustion reaction?
Combustion is a chemical reaction that often involves the presence of oxygen and produces light and heat within the form of flames. Because of the physical characteristics of the chemical process and the fact that more energy is produced than can be released through the surrounding medium, the rate or speed with which the substances that react combine is high. As a result, the ambient temperature about the reactants is increased, accelerating the reaction even further.
A lit match is a common illustration of a combustion reaction. A flame is produced when a match strikes something because friction warms the head of the match to a temperature where the chemicals respond by creating additional heat than can be released into the atmosphere. C[tex]_6[/tex]H[tex]_{12}[/tex] + O[tex]_2[/tex] → CO[tex]_2[/tex] +H[tex]_2[/tex]O + heat can be balanced as C[tex]_6[/tex]H[tex]_{12}[/tex] + 6O[tex]_2[/tex] → 6CO[tex]_2[/tex] +6 H[tex]_2[/tex]O + heat
Therefore, the correct option is option C.
To know more about combustion reaction, here:
https://brainly.com/question/13096727
#SPJ7
Which organ produces the female hormone estrogen
Answer:
it is B Ovary.
Explanation:
Answer:
answer b
Explanation:
it says it above
How many grams of NaCI are dissolved in a 500.0 mL of a 0.04M solution of NaCI?
A: 0.05 g
B: 1.17 g
C: 1.46 g
D: 2.92 g
Answer:
B 1.17
Explanation:
There is .02 mols of nacl in a .4M solution
so you multiply by the molar weight of NaCl (58.44)
What volume in liters of fluorine gas is needed to form 999 L of sulfur hexafluoride gas if the following reaction takes place at 2.00 atm and 273.15 K: S(s) + 3F₂(g) → SF₆ (g)
Answer: A volume of 2997 liters of fluorine gas is needed to form 999 L of sulfur hexafluoride gas if the given reaction takes place at 2.00 atm and 273.15 K.
Explanation:
The given reaction is as follows.
[tex]S(s) + 3F_{2}(g) \rightarrow SF_{6}(g)[/tex]
This show that 3 moles of fluorine is reacting to give 1 moles of sulfur hexafluoride.
According to the ideal gas formula,
PV = nRT
This means that volume of a gas is directly proportional to the number of moles. Hence, volume of fluorine required is calculated as follows.
[tex]3 \times 999 L\\= 2997 L[/tex]
Thus, we can conclude that a volume of 2997 liters of fluorine gas is needed to form 999 L of sulfur hexafluoride gas if the given reaction takes place at 2.00 atm and 273.15 K.
which is the smallest part of element having all properties of that element
Answer:
An atom
Explanation:
Atom is the smallest indivisible part of an element that retains its chemical identity. An atom contains the protons, neutrons and electrons, which are collectively called SUBATOMIC PARTICLES.
These particles ensure that the chemical identity of an element is maintained. For example, Chlorine has an element has an atom made up of 17 protons, 17 electrons and 18 neutrons. Therefore, chlorine atom is the smallest part of the chlorine element (Cl) that have all properties of that chlorine element.
what is the role of salinity in water density?
Answer:
Higher the salinity, more is the density.
Explanation:
The oceanic water is a large storehouse of heat and salinity. The salinity is higher at someplace while it's lower at some places is due to the presence of freshwater and cool water that is less dense. Areas of higher salinity are due to the high evaporation, less precipitation, and influx of rivers. The warm water floats at the top while the cold and cool water at the bottom.consider the unbalanced chemical equation hf + al -> alf3 + h2. when coefficients are added to balance the equation, which two substances have a coefficient of two?
a. hf
b. alf3
c. h2
d. al
Answer:
a
Explanation:
because you need to add 2 to to hf to make it equal to h2
If the temp. of 63.4 grams of water changes from 22.3C to 28.7C, how many joules of heat are involved? Show work
Answer:
Q = 1698.51 J
Explanation:
Given that,
Mass of water, m = 63.4 grams
It changes temperature from 22.3C to 28.7C.
We need to find the heat involved. The heat involved due to the change in temperature is given by :
[tex]Q=mc\Delta T[/tex]
Where
c is the specific heat of water, c = 4.186 joule/gram °C
So,
[tex]Q=63.4 \times 4.186 \times (28.7- 22.3)\\\\Q=1698.51\ J[/tex]
So, 1698.51 J of heat is involved.
hydrocarbon.
4-ethyl-3-methyloctane
Answer:
The answer to your question is given below.
Explanation:
From the question given above, we obtained the following:
Name of compound =>
4–ethyl–3–methyloctane
Structure of compound =>?
To successfully draw the structure of the compound given above, we must note the following:
1. The parent name of the compound is octane. This implies that the longest continuous carbon chain is 8.
2. The compound contains only single bond since it a member of the alkane family.
3. Ethyl (–CH₂CH₃) and methyl (–CH₃) are substituent group attached to the compound.
4. Ethyl (–CH₂CH₃) is located carbon 4 while methyl (–CH₃) is located at carbon 3.
With the above information in mind, we can successfully draw the structure of the compound.
Please see attached photo for the structure of the compound.
In the reaction 2KCIO3 → 2KCI+ 302 , oxygen is a
A. reactant
B. product
C. coefficient
D. subscript
Answer:
coefficient
Explanation:
It a part of the equation
For the following example identify the following h2o
Answer:
Explanation:
Well you didn’t send a picture of the question but h2O is water so. If the questions answer has a option of water then pick that one
If a material conducts heat easily, it is a good__________________. The answer has to be 18 letters long please type in the right answer please and tank you
Please answer if you know it I need this today this question is only for people who have done it or they know the answer. Please answer this I need to know the answer please and thank you have a good day! It would be amazing if I got an A+ on my final test! PLEASE HELP AND PLEASE ANSWER IF YOU KNOW THE ANSWER PLEASE HELP!!!!!!!!!!
AND DO NOT PUT IT ON NO FILE OR NOTHING PLEASE AND I MEAN IT PLEASE DON'T I CAN'T OPEN IT PLEASE DON'T PUT ANSWER ON FLIE PLEASE!!!!!!!!!!!!!!!
Answer:
Thermal Conductor
Explanation:
With the help of mole ratio one can predict:
ck12 = both A & B
Moles of product formed from a certain number of moles of reactant
Moles of reactant required for a certain number of moles of product
Answer:
D. Both A and B
Explanation:
got it right
Match the following aqueous solutions with the appropriate letter.
1. 0.19 m AgNO3
2. 0.17 m CrSO4
3. 0.13 m Mn(NO3)2
4. 0.31 m Sucrose(nonelectrolyte)
a. Highest boiling point
b. Second highest boiling point
c. Third highest boiling point
d. Lowest boiling point
Answer:
Explanation:
When a salt is dissolved , it increases the boiling point . Increase in boiling point depends upon number of ions . So it is a colligative property .
.19 m AgNO₃ . Each molecule will ionize into two ions . So effective molar concentration is 0.19 x 2 = .38 m
0.17 m CrSO4.Each molecule will ionize into two ions . So effective molar concentration is 0.17 x 2 = .34 m
0.13 m Mn(NO₃)₂. Each molecule will ionize into three ions . So effective molar concentration is 0.13 x 3 = .39 m
0.31 m Sucrose(nonelectrolyte). Molecules will not ionize . So effective molar concentration is 0.31 x 1 = .31 m
Higher the molar concentration , greater the depression in boiling point .
So lowest boiling point is 0.13 m Mn(NO₃)₂.
second highest boiling point is 0.19 m AgNO3.
Third lowest boiling point is 0.17 m CrSO4
Highest boiling point or lowest depression 0.31 m Sucrose.
a . 4
b . 1
c . 2
d . 3
ррррно да
Level 1
12
11
10
B
2
IA А
3
С C
8.
7.
1 D
# - tic
А д-
а.
Answer:
tic
Explanation:
because it is my answer okay
Chemistry explaining the vapour pressure
Answer:
Vapor pressure is defined as the pressure exerted by a vapor in thermodynamic equilibrium with its condensed phases (solid or liquid) at a given temperature in a closed system.
Explanation:
A student is performing an acid-base extraction on unknown compounds, and she extracts the organic layer with 5% HCl solution and separates off the aqueous layer. She then adds sodium hydroxide solution to the aqueous layer and observes a white precipitate. Which of the following functional group(s) is most likely in the precipitated compound?
a. ether
b. amine
c. carboxylic acid
d. ester
Answer:
amine
Explanation:
We have to bear in mind that amines are basic compounds. This idea will be very important in attempting to answer this question.
So, when she adds 5% HCl solution in order to extract the organic layer, the amine forms a hydrochloride salt which is contained in the aqueous layer.
The addition of a base such as NaOH leads to the formation of a white precipitate of the amine.
A galvanic cell generates a cell potential of 0.32V when operated under standard conditions according to the reaction above. Which conditions are needed to construct a similar cell that generates the lowest cell potential?
The complete question is shown in the image attached to this answer.
Answer:
C
Explanation:
Let us quickly remember that the EMF of a cell under non standard conditions in given by the Nernst equation.
This equation states that;
E = E°cell - 0.592/n log Q
Where
E = EMF under non standard conditions
E°cell= standard EMF of the cell
n = number of electrons transferred
Q = reaction quotient
If the reaction quotient is greater than 1 then cell potential is less than the standard cell potential.
The cell that generates the lowest cell potential is the cell depicted in option C because Q has the greatest positive value(Q<1).
The cell potential is the redox potential that measures the acquired to lost electrons at the electrodes. The lowest cell potential is generated by cell C with 0.5 M.
What is EMF?EMF is the electromotive force that is the total of the electric potential difference produced at the half cells of the galvanic cell (electrochemical cell).
EMF of the cell is given as,
[tex]\rm E = \rm E^{\circ} - \dfrac{0.592}{n}\; log Q[/tex]
Here, E is the electromotive force, [tex]\rm E^{\circ}[/tex] is the standard EMF, n is the number of the transferred electrons, and Q is the reaction quotient.
When the reaction quotient (Q) is greater than 1 then, cell potential will be less than standard cell potential.
Therefore, cell C with 0.5 M and Q > 1 is a similar cell.
Learn more about galvanic cells here:
https://brainly.com/question/23819073
What is the total energy (in Joules) required to raise the temperature
of 630 g of water from 20°C to 110°C?
10 points of bullying
Answer: Bullying is not good!
Name the functional group in the
following molecule:
CH3CH2OCH2CH3
A ester
B. acid anhydride
C ketone
D. ether
Answer:
d
Explanation:
i just did it
The functional group in the following molecule CH₃CH₂OCH₂CH₃ is ether.
What is functional group?Functional group is defined as a substituent or group of atoms or an atom which causes chemical reactions.Each functional group will react similarly regardless to the parent carbon chain to which it is attached.This helps in prediction of chemical reactions.
The reactivity of functional group can be enhanced by making modifications in the functional group .Atoms present in functional groups are linked to each other by means of covalent bonds.They are named along with organic compounds according to IUPAC nomenclature.
Functional group inter conversion is also possible by retro -synthesis.In some cases , functional groups can be charged molecules.
Learn more about functional group,here:
https://brainly.com/question/14618322
#SPJ7
How can air pollution affect plants?
A. Air pollution can block sunlight from reaching plants.
B. Air pollution can affect the water plants need.
C. Air pollution absorbs carbon dioxide.
D. Air pollution can change normal temperatures of a region.
Answer:
C. air pollution absorbs carbon dioxide
Explanation:
Carbon dioxide's role in the greenhouse effect is a major contributor to air pollution. Radiation and heat emanating from the earth's surface need to be released out into the atmosphere. But because carbon dioxide levels are so high, there is an ozone effect on the ground level.