determine if each set is orthogonal, orthonormal, or neither. if it orthogonal, normalize the vectors to produce an orthonormal set

The dimensions that require the minimum amount of material for the open-top box are:

Length = 8 inches, Width = 8 inches, Height = 4 inches.

To find the dimensions that minimize the amount of material needed, we can approach the problem by using calculus and optimization techniques. Let's denote the length of the square bottom as "x" inches and the height of the box as "h" inches. Since the volume of the box is given as 256 cubic inches, we have the equation:

Volume = Length × Width × Height = x² × h = 256.

To minimize the material used, we need to minimize the surface area of the box. The surface area consists of the bottom area (x²) and the combined areas of the four sides (4xh). Therefore, the total surface area (A) is given by the equation:

A = x² + 4xh.

We can solve for h in terms of x using the volume equation:

h = 256 / (x²).

Substituting this expression for h in terms of x into the surface area equation, we get:

A = x² + 4x(256 / (x²)).

Simplifying further, we obtain:

A = x² + 1024 / x.

To minimize A, we take the derivative of A with respect to x, set it equal to zero, and solve for x:

dA/dx = 2x - 1024 / x² = 0.

Solving this equation yields x = 8 inches. Plugging this value back into the equation for h, we find h = 4 inches.

Therefore, the dimensions that require the minimum amount of material are: Length = 8 inches, Width = 8 inches, and Height = 4 inches.

Learn more about Optimization techniques

brainly.com/question/28315344

#SPJ11

The average deviation from the mean width of 31.19 cm is 0.1725 cm. This means that, on average, the data points are about 0.1725 cm away from the mean width.

The average deviation of a data set is a measure of how spread out the data is from its mean.

It is calculated by finding the absolute value of the difference between each data point and the mean, then taking the average of these differences.

In this problem, we are given a set of deviations from the mean width of 31.19 cm.

The deviations are:

31.5, 0.086 cm, 0.25, -0.01

The average deviation, we need to calculate the absolute value of each deviation, then their average.

We can use the formula:

average deviation = (|d1| + |d2| + ... + |dn|) / n

d1, d2, ..., dn are the deviations and n is the number of deviations.

Using this formula and the given deviations, we get:

average deviation = (|31.5 - 31.19| + |0.086| + |0.25| + |-0.01|) / 4

= (0.31 + 0.086 + 0.25 + 0.01) / 4

= 0.1725 cm

For similar questions on average deviation

https://brainly.com/question/28225633

#SPJ11

The average deviation from the mean width of 31.19 cm is 20.42 cm. This tells us that the data points are spread out from the mean by an average of 20.42 cm, which is a relatively large deviation for a dataset with a mean of 31.19 cm.

In statistics, deviation refers to the amount by which a data point differs from the mean of a dataset. The average deviation is a measure of the average distance between each data point and the mean of the dataset. To calculate the average deviation, we first need to calculate the deviation of each data point from the mean.

In this case, we have the mean width x as 31.19 cm and the deviations of the data points as 0.5 cm and -0.086 cm. To calculate the deviation, we subtract the mean from each data point:

Deviation of 31.5 cm = 31.5 - 31.19 = 0.31 cm

Deviation of 0.5 cm = 0.5 - 31.19 = -30.69 cm

Deviation of -0.086 cm = -0.086 - 31.19 = -31.276 cm

Next, we take the absolute value of each deviation to eliminate the negative signs, as we are interested in the distance from the mean, not the direction. The absolute deviations are:

Absolute deviation of 31.5 cm = 0.31 cm

Absolute deviation of 0.5 cm = 30.69 cm

Absolute deviation of -0.086 cm = 31.276 cm

The average deviation is calculated by summing the absolute deviations and dividing by the number of data points:

Average deviation = (0.31 + 30.69 + 31.276) / 3 = 20.42 cm

To learn more about deviations, click here: https://brainly.com/question/475676

#SPJ11

Let x be the number of batches Amanda must sell each month in order to make a profit.

The total cost that Amanda incurs to produce x batches of cupcakes in a month is:

Total cost = cost of each batch × number of batches= $5.00x

The total revenue that Amanda generates by selling x batches of cupcakes in a month is:

Total revenue = price of each batch × number of batches= $20.00x

To make a profit, Amanda's total revenue must be greater than her total costs.

Thus, we can write the inequality:

Total revenue > Total cost

$20.00x > $5.00x + $1,500

Simplifying the inequality,

we get:

$15.00x > $1,500

Dividing both sides by $15.00,

we get

x > 100

Therefore, Amanda must sell more than 100 batches of cupcakes each month to make a profit.

To know more about inequality,visit:

https://brainly.com/question/30231190

#SPJ11

To write an equivalent series with the index of summation beginning at n = 1, you'll need to shift the index of the original series. The original series is:

Σ (−1)^n * 1/(n+1) * x^n, with n starting from 0.

To shift the index to start from n = 1, let m = n - 1. Then, n = m + 1. Substitute this into the series:

Σ (−1)^(m+1) * 1/((m+1)+1) * x^(m+1), with m starting from 0.

Now, replace m with n:

Σ (−1)^(n+1) * 1/(n+2) * x^(n+1), with n starting from 0.

This is the equivalent series with the index of summation beginning at n = 1.

Learn more about equivalent series: https://brainly.com/question/2972832

#SPJ11

Answer:

The angles are complementary. It is a 90° angle or a right angle.

x = 50°

Hope this helps!

Step-by-step explanation:

50° + 40° = 90°

If Dave plans to use 25 pounds of tomatoes for each pizza and he is making a total of 6 pizzas, then the total amount of tomatoes he needs can be calculated by multiplying the amount per pizza by the number of pizzas:

25 pounds/pizza * 6 pizzas = 150 pounds

Therefore, Dave needs a total of 150 pounds of tomatoes.

The whole numbers falling between which this amount of tomatoes falls can be determined by considering the next smaller and next larger whole numbers.

The next smaller whole number is 149 pounds, and the next larger whole number is 151 pounds.

So, the number of pounds of tomatoes Dave needs falls between 149 and 151 pounds.

Learn more about whole number here:

https://brainly.com/question/17990391

#SPJ11

To express the ratio of 4 birr to 16 cents as a fraction in its lowest terms, we need to convert the currencies to a common unit.

1 birr is equal to 100 cents, so 4 birr is equal to 4 * 100 = 400 cents.

Now we have the ratio of 400 cents to 16 cents, which can be simplified by dividing both the numerator and denominator by their greatest common divisor (GCD), which in this case is 8.

400 cents ÷ 8 = 50 cents

16 cents ÷ 8 = 2 cents

Therefore, the ratio 4 birr to 16 cents expressed as a fraction in its lowest terms is:

50 cents : 2 cents

Simplifying further:

50 cents ÷ 2 = 25

2 cents ÷ 2 = 1

The fraction in its lowest terms is:

25 : 1

So, the ratio 4 birr to 16 cents is equivalent to the fraction 25/1.

Learn more about fraction here:

https://brainly.com/question/78672

#SPJ11

Therefore, there are about 203 pennies in the bag. This is a 90-word long answer. If you need to provide a 250-word answer, you can expand the explanation by discussing the weight and denomination of pennies, their history, and their use.

To find out the number of pennies in a bag that weighs 711.55 grams, we need to divide the total weight by the weight of each penny. We know that each penny weighs 3.5 grams,

therefore: Number of pennies = Total weight of bag / Weight of one penny= 711.55 / 3.5 = 203.015 ≈ 203 (rounded to the nearest whole number)

Therefore, there are about 203 pennies in the bag. To summarize the answer in a long answer format, we can write: We can find the number of pennies in the bag by dividing the total weight of the bag by the weight of each penny. Given that each penny weighs 3.5 grams, we can find out the number of pennies by dividing 711.55 grams by 3.5 grams.

Therefore, Number of pennies = Total weight of bag / Weight of one penny= 711.55 / 3.5 = 203.015 ≈ 203 (rounded to the nearest whole number)

Therefore, there are about 203 pennies in the bag. This is a 90-word long answer. If you need to provide a 250-word answer, you can expand the explanation by discussing the weight and denomination of pennies, their history, and their use.

To know more about number visit:

https://brainly.com/question/3589540

#SPJ11

The solution for 3 on the interval [0, 2) is 3 = π/6, 13π/6 or 30°, 390°.

To solve for 3 from sin(3) = 1/2 on the interval [0, 2), we need to use the inverse sine function (arcsin) and solve for the angle whose sine is equal to 1/2.
arcsin(1/2) = 30° or π/6 radians
Since the interval is [0, 2), we need to add 2π to the angle if it is less than 0 or greater than or equal to 2π.
So, the solution for 3 on the given interval is:
3 = π/6 or 30°, or
3 = π/6 + 2π = 13π/6 or 390°
Therefore, the solution for 3 on the interval [0, 2) is 3 = π/6, 13π/6 or 30°, 390°.

To know more about Inverse Sine Function visit:
https://brainly.com/question/29547271
#SPJ11

The graph along the coordinate plane is attached below

To find the graph of the points along the coordinate plane, we simply need to use a graphing calculator to plot the points M - N, N - P, P - Q, Q - R and R - M.

These individual points in this coordinates cannot form a quadrilateral on the plane.

The total perimeter or distance of the plane cannot be calculated by simply adding up all the points along the line.

However, these lines seem not to intersect at any point as they travel across the plane in different directions.

Learn more on graph along a coordinate plane here;

https://brainly.com/question/29118098

#SPJ1

Explicit formulas are mathematical expressions that represent a function or relationship between variables in a direct and clear way, without the need for further calculations or interpretation.

To find the explicit formulas for the compositions of the given functions, we need to substitute the function inside the other function and simplify:

(a) fog(x) = f(g(x)) = f(5x + 7) = 2(5x + 7) + 3 = 10x + 17

So the explicit formula for fog(x) is 10x + 17.

(b) gof(x) = g(f(x)) = g(2x + 3) = 5(2x + 3) + 7 = 10x + 22

So the explicit formula for gof(x) is 10x + 22.

(c) foh(x) = f(h(x)) = f(x^2 + 1) = 2(x^2 + 1) + 3 = 2x^2 + 5

So the explicit formula for foh(x) is 2x^2 + 5.

(d) hof(x) = h(f(x)) = h(2x + 3) = (2x + 3)^2 + 1 = 4x^2 + 12x + 10

So the explicit formula for hof(x) is 4x^2 + 12x + 10.

To learn more about mathematical visit:

brainly.com/question/27235369

#SPJ11

The values of x, y and z that correspond to the critical point of the function f(x,y) 4x2 + 7x + 6y + 2y are  (-7/8, -3/2).

To find the values of x, y, and z that correspond to the critical point of the function f(x, y) = 4x^2 + 7x + 6y + 2y^2, we need to find the partial derivatives with respect to x and y, and then solve for when these partial derivatives are equal to 0.

Step 1: Find the partial derivatives
∂f/∂x = 8x + 7
∂f/∂y = 6 + 4y

Step 2: Set the partial derivatives equal to 0 and solve for x and y
8x + 7 = 0 => x = -7/8
6 + 4y = 0 => y = -3/2

Now, we need to find the value of z using the given equation c = za. Since we do not have any information about c, we cannot determine the value of z. However, we now know the critical point coordinates for the function are (-7/8, -3/2).

Know more about critical point here:

https://brainly.com/question/29144288

#SPJ11

The given limit can be expressed as the definite integral:

∫[0 to 1] 3x^8 dx

To express the limit as a definite integral, we can use the definition of a Riemann sum. Let's consider the function f(x) = x^8.

The given limit can be rewritten as:

lim(n→∞) Σ[i=1 to n] (3i^8 / n^9)

Now, let's express this limit as a definite integral. We can approximate the sum using equal subintervals of width Δx = 1/n. The value of i can be replaced with x = iΔx = i/n. The summation then becomes:

lim(n→∞) Σ[i=1 to n] (3(i/n)^8 / n^9)

This can be further simplified as:

lim(n→∞) (1/n) Σ[i=1 to n] (3(i/n)^8 / n)

Taking the limit as n approaches infinity, the sum can be written as:

lim(n→∞) (1/n) ∑[i=1 to n] (3(i/n)^8 / n) ≈ ∫[0 to 1] 3x^8 dx

Know more about integral here;

https://brainly.com/question/18125359

#SPJ11

The Taylor polynomial T2 centered at a = 0 for f(x) = 13 tan(x) is T2(x) = 13x, and the Taylor polynomial T3 centered at a = 0 is T3(x) = 13x + (26/3)x³.

To calculate the Taylor polynomials T2 and T3 centered at a = 0 for the function f(x) = 13 tan(x), we need to find the first few derivatives of f(x) and then evaluate them at a = 0.

1. Find the first few derivatives:
f'(x) = 13 sec²(x)
f''(x) = 26 sec²(x)tan(x)
f'''(x) = 26 sec²(x)(tan^2(x) + 2)

2. Evaluate derivatives at a = 0:
f(0) = 13 tan(0) = 0
f'(0) = 13 sec²(0) = 13
f''(0) = 26 sec²(0)tan(0) = 0
f'''(0) = 26 sec²(0)(tan²(0) + 2) = 52

3. Form the Taylor polynomials:
T2(x) = f(0) + f'(0)x + (1/2)f''(0)x² = 0 + 13x + 0 = 13x
T3(x) = T2(x) + (1/6)f'''(0)x³ = 13x + (1/6)(52)x³ = 13x + (26/3)x³

To know more about Taylor polynomial click on below link:

https://brainly.com/question/31419648#

#SPJ11

Parametric equations for the line through (1, 3, 4) that is perpendicular to the plane x-y+2z=4 are:

x = 1 + 2t

y = 3 - t

z = t

We know that the direction vector of the line should be perpendicular to the normal vector of the plane. The normal vector of the plane x-y+2z=4 is <1, -1, 2>. Thus, the direction vector of our line should be parallel to the vector <1, -1, 2>.

Let the line pass through the point (1, 3, 4) and have the direction vector <1, -1, 2>. We can write the parametric equations of the line as:

x = 1 + at

y = 3 - bt

z = 4 + c*t

where (a, b, c) is the direction vector of the line. Since the line is perpendicular to the plane, we can set up the following equation:

1a - 1b + 2*c = 0

which gives us a = 2, b = -1, and c = 1.

Substituting these values in the parametric equations, we get:

x = 1 + 2t

y = 3 - t

z = t

To find the intersection of the line with the xy-plane, we set z=0 in the parametric equations, which gives us x=1+2t and y=3-t. Solving for t, we get (1/2, 5/2, 0). Therefore, the line intersects the xy-plane at the point (1/2, 5/2, 0).

Similarly, we can find the intersection points with the yz-plane and xz-plane by setting x=0 and y=0 in the parametric equations, respectively. We get the intersection points as (-1, 5, 0) and (9, 0, 3), respectively.

For more questions like Vector click the link below:

https://brainly.com/question/29740341

#SPJ11

In triangle ΔGHI, with ∠I measuring 90° and ∠G measuring 82°, and GH measuring 3.4 feet, the length of HI is 24.2 feet.

To find the length of HI, we can use the trigonometric function tangent (tan). In a right triangle, the tangent of an angle is equal to the ratio of the length of the side opposite the angle to the length of the side adjacent to it. In this case, the side opposite ∠G is HI, and the side adjacent to ∠G is GH. Therefore, we can set up the equation: tan(82°) = HI / GH.

Rearranging the equation to solve for HI, we have: HI = GH * tan(82°). Plugging in the given values, we get: HI = 3.4 * tan(82°). Using a calculator, we find that tan(82°) is approximately 7.115. Multiplying 3.4 by 7.115, we find that HI is approximately 24.161 feet. Rounded to the nearest tenth of a foot, the length of HI is 24.2 feet.

Learn more about tangent here:

https://brainly.com/question/10053881

#SPJ11

The required answer is a vector in R^5, then we would set b = 5.

To determine the values of a and b in the linear transformation defined by T(x) = Ax, we need to consider the dimensions of the matrix A and the vector x.

We know that A is an 8x9 matrix, which means it has 8 rows and 9 columns. We also know that x is a vector in R^a, which means it has a certain number of components or entries.
The matrix A has 8 rows and 9 columns, which means it maps 9-dimensional vector to 8-dimensional vectors .
To ensure that the matrix multiplication Ax is defined and results in a vector in R^b, we need the number of columns in A to be equal to the number of components in x. In other words, we need 9 = a and b will depend on the number of rows in A and the desired output dimension of T(x).

Therefore, a = 9 and b can be any number between 1 and 8, inclusive, depending on the desired output dimension of T(x). For example,

if we want T(x) to output a vector in R^5, then we would set b = 5.

To know more about linear transformation . Click on the link.

https://brainly.com/question/30514241

#SPJ11

1. the values of A, φ, and ω1 are A = 11, φ = -π/3, and ω1 = 7π/81.

2. The values of A, φ, and ω1 are A = 11, φ = -π/3, and ω1 = 2π/3.

Part 1: Sampling frequency is fs = 9 samples/s.

The sampling period is T = 1/fs = 1/9 seconds.

The discrete-time signal x[n] is obtained by sampling x(t) at a rate of 9 samples/s, so we have:

x[n] = x(nT) = 11 cos(7πnT - π/3)

= 11 cos(7πn/9 - π/3)

The angular frequency is ω = 7π/9, which satisfies 0 ≤ ω ≤ π.

The amplitude A can be found by taking the absolute value of the maximum value of the cosine function, which is 11. So A = 11.

The phase φ can be found by setting n = 0 and solving for φ in the equation x[0] = A cos(φ). We have:

x[0] = 11 cos(π/3) = 11/2

A cos(φ) = 11/2

φ = ±π/3

We choose the negative sign to satisfy the condition 0 ≤ ω1 ≤ π. So φ = -π/3.

The angular frequency ω1 is given by ω1 = ωT = 7π/9 * (1/9) = 7π/81.

Since the angular frequency satisfies 0 ≤ ω1 ≤ π, the signal is not over-sampled or under-sampled.

Therefore, the values of A, φ, and ω1 are A = 11, φ = -π/3, and ω1 = 7π/81.

Part 2: Sampling frequency is fs, = 6 samples/s.

The sampling period is T = 1/fs, = 1/6 seconds.

The discrete-time signal x[n] is obtained by sampling x(t) at a rate of 6 samples/s, so we have:

x[n] = x(nT) = 11 cos(7πnT - π/3)

= 11 cos(7πn/6 - π/3)

The angular frequency is ω = 7π/6, which does not satisfy 0 ≤ ω ≤ π. Therefore, the signal is over-sampled.

To find the values of A, φ, and ω1, we need to first down-sample the signal by keeping every other sample. This gives us:

x[0] = 11 cos(-π/3) = 11/2

x[1] = 11 cos(19π/6 - π/3) = -11/2

x[2] = 11 cos(25π/6 - π/3) = -11/2

We can see that x[n] is a periodic signal with period N = 3.

The amplitude A can be found by taking the absolute value of the maximum value of the cosine function, which is 11. So A = 11.

The phase φ can be found by setting n = 0 and solving for φ in the equation x[0] = A cos(φ). We have:

x[0] = 11/2

A cos(φ) = 11/2

φ = ±π/3

We choose the negative sign to satisfy the condition 0 ≤ ω1 ≤ π. So φ = -π/3.

The angular frequency ω1 is given by ω1 = 2π/N = 2π/3.

Therefore, the values of A, φ, and ω1 are A = 11, φ = -π/3, and ω1 = 2π/3.

To know more about Sampling frequency refer here:

https://brainly.com/question/30454929

#SPJ11

The eigenvalues of the coefficient matrix a(t) are 5,1,-1.

To find the eigenvalues of the coefficient matrix, we need to first form the coefficient matrix A by taking the partial derivatives of the given system of differential equations with respect to x, y, and z. This gives us:

A = [y, x, -1; 0, 5, 0; 0, 1, -1]

Next, we need to find the characteristic equation of A, which is given by:

det(A - λI) = 0

where I is the identity matrix and λ is the eigenvalue we are trying to find.

We can expand this determinant to get:

(λ - 5)(λ - 1)(λ + 1) = 0

Therefore, the eigenvalues of the coefficient matrix are λ = 5, λ = 1, and λ = -1.

Learn more about eigenvalue at https://brainly.com/question/31957204

#SPJ11

To find the area of a regular hexagon inscribed in a circle, we can use the formula:

Area of Hexagon = (3√3/2) * s^2

Where s is the length of each side of the hexagon.

In this case, the hexagon is inscribed in a circle of radius 12 inches. The length of each side of the hexagon is equal to the radius of the circle.

Therefore, the length of each side (s) is 12 inches.

Plugging the value of s into the formula, we get:

Area of Hexagon = (3√3/2) * (12^2)

Area of Hexagon = (3√3/2) * 144

Area of Hexagon = (3√3/2) * 144

Area of Hexagon ≈ 374.52 square inches

The area of the regular hexagon inscribed in the circle with a radius of 12 inches is approximately 374.52 square inches.

Learn more about hexagon Visit : brainly.com/question/15424654

#SPJ11

The probability that the mean repair time is less than 8.9 hours is 0.6103 (or 61.03%).

Given information: Mean repair time is 8.4 hours and Standard deviation is 1.8 hours

To find: Probability that the mean repair time is less than 8.9 hoursZ score can be calculated using the formula;

Z = (X - μ) / σWhere,

Z = z score

X = Value for which we need to find the probability (8.9 hours)

μ = Mean (8.4 hours)

σ = Standard deviation (1.8 hours)

Substituting the values in the above formula;

Z = (8.9 - 8.4) / 1.8Z = 0.28

Probability for z-score of 0.28 can be found from z table.

The value from the table is 0.6103

To know more about, mean visit

https://brainly.com/question/31101410

#SPJ11

The Virginia Company paid $7,500 in cash for manufacturing overhead costs, which refers to indirect expenses incurred in the production process.

Examples of manufacturing overhead costs include rent, utilities, insurance, and maintenance expenses.

By paying for these expenses, the Virginia Company was able to keep their manufacturing operations running smoothly and efficiently.

This transaction would likely be recorded in the company's financial records as a debit to manufacturing overhead and a credit to cash.

Ultimately, the payment of manufacturing overhead costs helps to ensure that the company can produce goods at a reasonable cost while maintaining high quality standards, which is essential for long-term success in the competitive marketplace.

Learn more about overhead cost at

https://brainly.com/question/14811739

#SPJ11

1. the answer is the vector [-11 -9] and 2. The answer is the vector [-30 -24].

First, let's recall the definition of eigenvectors and eigenvalues. An eigenvector of a matrix A is a non-zero vector v such that when A is multiplied by v, the result is a scalar multiple of v. That scalar multiple is called the eigenvalue corresponding to that eigenvector. In other words, if v is an eigenvector of A with eigenvalue λ, then Av = λv.
Now, let's use this definition to answer your questions.
1. A(v1+v2) = Av1 + Av2 = λ1v1 + λ2v2. Substituting in the given values of λ1, λ2, v1, and v2, we get:
A(v1+v2) = 3[-5 -4] + (-1)[-4 -3]
= [-15 -12] + [4 3]
= [-11 -9]
So the answer is the vector [-11 -9].
2. A(-2v1) = -2Av1 = -2λ1v1. Substituting in the given value of λ1 and v1, we get:
A(-2v1) = -2(3)[-5 -4]
= [-30 -24]
So the answer is the vector [-30 -24].

Learn more about eigenvectors here:

https://brainly.com/question/31013028

#SPJ11

1.the answer is the vector [-11  -9] and  2.The answer is the vector [-30  -24].

Since [tex]v_{1}[/tex] and [tex]v_{2}[/tex] are eigenvectors of matrix A, we know that:
A [tex]v_{1}[/tex] = λ1 [tex]v_{1}[/tex]
A [tex]v_{2}[/tex] = λ2 [tex]v_{2}[/tex]
Let's use this information to solve the given problems:
1. A( [tex]v_{1}[/tex] + [tex]v_{2}[/tex] ) = A [tex]v_{1}[/tex]  + A [tex]v_{2}[/tex] = λ1 [tex]v_{1}[/tex] + λ2 [tex]v_{2}[/tex]
Substituting the values of λ1, [tex]v_{1}[/tex] , λ2, [tex]v_{2}[/tex] and  that were given:

A( [tex]v_{1}[/tex] + [tex]v_{2}[/tex] ) = 3[-5  -4] + (-1)[-4  -3]
= [-15  -12] + [4 3] = [-11  -9]
So the answer is the vector [-11  -9].
2. A(-2[tex]v_{1}[/tex] ) = -2 A [tex]v_{1}[/tex]
Using the given equation for A [tex]v_{1}[/tex] , we get:
A(-2[tex]v_{1}[/tex] ) = -2 λ1 [tex]v_{1}[/tex]
Substituting the values of λ1 and [tex]v_{1}[/tex]  that were given:

A(-2[tex]v_{1}[/tex]) = -2(3)[-5  -4] = [30  24]
So the answer is the vector [30  24].

Learn more about eigenvectors here:

https://brainly.com/question/31013028

#SPJ11

An order of complexity that is worse than polynomial is called quadratic is B. False.
An order of complexity that is worse than polynomial is not called quadratic.

A polynomial function is a function that can be expressed as the sum of finite terms, where each term is a constant multiplied by a variable raised to a non-negative integer power.

A quadratic function is a type of polynomial function of degree 2, meaning the highest power of the variable is 2. The order of complexity of an algorithm is a measure of the amount of time or space required by the algorithm to solve a problem, expressed in terms of the input size of the problem.

An algorithm with a polynomial time complexity has an execution time that grows at most as a polynomial function of the input size.

An algorithm with an exponential time complexity has an execution time that grows exponentially with the input size, and an algorithm with a factorial time complexity has an execution time that grows as a factorial of the input size.

Therefore, an order of complexity that is worse than polynomial is usually referred to as exponential or factorial complexity, not quadratic. Understanding the order of complexity of an algorithm helps us understand how well an algorithm will scale as the input size grows.

Learn more about order of complexity:

https://brainly.com/question/30490723

#SPJ11

The approximate length of the apothem is 20.1 cm.

The apothem of a polygon is the perpendicular distance from the center of the polygon to any of its sides. To determine the approximate length of the apothem, we need to consider the given options: 9.0 cm, 15.6 cm, 20.1 cm, and 25.5 cm.

Since we are asked to round to the nearest tenth, we can eliminate the options of 9.0 cm and 25.5 cm since they don't have tenths. Now, we compare the remaining options, 15.6 cm and 20.1 cm.

To determine the apothem's length, we can use the formula for the apothem of a regular polygon, which is given by:

apothem = side length / (2 * tan(π / number of sides))

By comparing the values, we see that 20.1 cm is closer to 15.6 cm than 20.1 cm is to 25.5 cm. Therefore, we can conclude that the approximate length of the apothem is 20.1 cm, rounding to the nearest tenth.

Learn more about apothem here:

https://brainly.com/question/31280798

#SPJ11

The answer is , to represent this situation in a bar model, we can use a Clear frame model.

To show the situation where Kyle spends a total of $44 for four sweatshirts, with each sweatshirt costing the same amount of money, the bar model that can be used is a Clear frame model.

Here's an explanation of the solution:

Given, that Kyle spends a total of $44 for four sweatshirts and each sweatshirt costs the same amount of money.

To find how much each sweatshirt costs, divide the total amount spent by the number of sweatshirts.

So, the amount that each sweatshirt costs is:

[tex]\frac{44}{4}[/tex] = $11

Thus, each sweatshirt costs $11.

To represent this situation in a bar model, we can use a Clear frame model.

A Clear frame model is a bar model in which the total is shown in a separate section or box, and the bars are used to represent the parts of the whole.

To know more about Amount visit:

https://brainly.com/question/31035966

#SPJ11

The Difference Quotient can be thought of as the average rate of change of the function f(x) over the interval [x, x+h]. To find the instantaneous rate of change of f(x) at a specific point, we need to take the limit of the Difference Quotient as h approaches zero. This limit will give us the slope of the tangent line to the graph of f(x) at the point x, which is the instantaneous rate of change of the function at that point.

To know more about  Difference Quotient  refer here:

https://brainly.com/question/30782454

#SPJ11

Answer:

7/24

Step-by-step explanation:

Total people in the studio = 24

3/8 are lifting weights
==> Number of people lifting weights  = 3/8 x 24 = 9

1/3 are cross training
==> Number of people cross training = 1/3 x 24 = 8

Therefore the remaining people who are running = 24 - (9 +8)

= 24 - 17

= 7

As a fraction of the total people, this would be

7/24

The interval of hours for which Juan is closer to the stadium than Rajani is t < 6, which means within the first 6 hours after noon.

To graph the functions representing Juan's and Rajani's distances from the stadium, we can use the equations:

J(t) = 260 - 30t (Juan's distance from the stadium)

R(t) = 380 - 50t (Rajani's distance from the stadium)

The functions represent the distance remaining (in miles) as a function of time (in hours) afternoon.

To determine the interval of hours for which Juan is closer to the stadium than Rajani, we need to find the values of t where J(t) < R(t).

Let's solve the inequality:

260 - 30t < 380 - 50t

-30t + 50t < 380 - 260

20t < 120

t < 6

Thus, the inequality shows that for t < 6, Juan is closer to the stadium than Rajani.

Learn more about inequalities here :

brainly.com/question/20383699

#SPJ1

Mary needs 4 7/12 feet of string for the 5 necklaces. The answer is option B.

To find how many feet of string Mary needs for 5 necklaces, we can multiply the length of string needed for each necklace by the number of necklaces.

Length of string needed for each necklace = 11/12 feet

Number of necklaces = 5

Total length of string needed = (Length of string needed for each necklace) * (Number of necklaces)

Total length of string needed = (11/12) * 5

Total length of string needed = 55/12 feet

To simplify the fraction, we can convert it to a mixed number:

Total length of string needed = 4 7/12 feet

Therefore, Mary needs 4 7/12 feet of string for the 5 necklaces. The answer is option B.

Read more on unit rate here:https://brainly.com/question/4895463

#SPJ1