Answer:
Transferring energy
Explanation:
Doing work always mean Transferring energy.
What is the quality of the sound of an ambulance's siren when it moves toward a stationary hearer? What is the quality of the sound of an ambulance's siren when it moves away from a stationary hearer?
Answer:
A) As the ambulance's siren moves toward a stationary hearer, the quality of sound will have a higher pitch
B) As the ambulance's siren moves away from a stationary hearer, the quality of sound will have a lower pitch.
Explanation:
From Doppler effect, the closer the source of sound gets to the observer, the higher the frequency and in turn the higher the pitch.
Meanwhile, the farther a source goes from an observer, the lower the frequency of the sound and also the lower the pitch.
Thus, as the ambulance's siren moves toward a stationary hearer, the quality of sound will have a higher pitch.
As the ambulance's siren moves away from a stationary hearer, the quality of sound will have a lower pitch.
Answer:
a. The quality of the sound would have a high pitch and thus be loud.
b. The quality of the sound would have a low pitch and thus would have a lower volume than the sound from the source.
Explanation:
Using the formula for Doppler shift f' = (v ± v')f/(v ± v") where v = speed of sound in air, v'= speed of hearer = 0 m/s (since he is stationary), v" = speed of ambulance and f = frequency of sound from ambulance
So, f' = (v ± v')f/(v ± v")
f' = (v ± 0)f/(v ± v")
f' = vf/(v ± v")
a. What is the quality of the sound of an ambulance's siren when it moves toward a stationary hearer?
Since the source (ambulance) moves towards the detector, (hearer), we would get an upwards shift in frequency. (Since our denominator has to be a minimum, so we use the minus sign for v"). So, the quality of the sound would have a high pitch and thus be loud.
b. What is the quality of the sound of an ambulance's siren when it moves away from a stationary hearer?
Since the source (ambulance) moves away the detector, (hearer), we would get a downward shift in frequency. (Since our denominator has to be a maximum, so we use the plus sign for v"). So, the quality of the sound would have a low pitch and thus would have a lower volume than the sound from the source.
the distance between a boy and a hill is 250 meters. if the boy shouts after how long will the echo be heard numerical problem
Answer:
1.47 s
Explanation:
From the question,
s = 2d/t................... Equation 1
s = speed of sound in air, d = distance between the boy and the hill, t = time to hear the echo.
make t the subject of the equation
t = 2d/s............... Equation 2
Given: d = 250 meters
Constant: s = 340 m/s
Substitute these values into equation 2
t = (2×250)/340
t = 500/340
t = 1.47 s
Boxers wear gloves that are padded to lessen the force of a punch. Calculate the force exerted by a boxing glove on an opponent's face, if the glove and face compress 8.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. Give your answer in Newtons, do not include the unit in your answer.
Answer:
F = 4117.64
Explanation:
First, we will calculate the acceleration of the hand, by using the third equation of motion:
[tex]2as = v_f^2 - v_i^2\\[/tex]
where,
a = acceleration = ?
s = distance covered = compression = 8.5 cm = 0.085 m
vf = final speed = 0 m/s
vi = iniial speed = 10 m/s
Therefore,
[tex]2a(0.085\ m) = (0\ m/s)^2-(10\ m/s)^2\\a = - 588.23\ m/s^2[/tex]
negative sign hows deceleration.
Now, we will calculate the force exerted by the hand:
[tex]F = ma = (7\ kg)(588.23\ m/s^2)\\[/tex]
F = 4117.64 N
The smaller the mass of an object, the _____ its inertia
Answer:
larger
Explanation:
just trust me
The smaller the mass of an object, the smaller its inertia, because the inertia of any object is directly proportional to the mass of the object
What is inertia?The ability of an object to resist changes in motion is known as inertia. The amount of inertia is directly related to an object's mass; in fact, as we frequently observe, the heavier an object is, the harder it is to change its direction of motion.
A straightforward illustration: While it is relatively simple to stop a tennis ball that has been thrown in our direction, we are aware that it is more difficult to stop a large truck that is moving in the same direction at the same speed. This is because the truck has a much higher mass than the tennis ball and a higher moment of inertia. As a result, inertia rises as mass does.
Since the inertia of any object is directly proportional to its mass, the smaller its mass, the less inertia it will have.
Learn more about Inertia from here
https://brainly.com/question/1358512
#SPJ5
How are radio waves modified to send information?
Answer:
Radio waves can be modified by their amplitude or frequency in order to transmit sound or data.
Explanation:
Hope this helped!!!
Two particles are placed near each other. Each has a charge of +2e. One particle exerts both an electric force Fe and a gravitational force Fg on the other particle.
Answer:
hi your question is incomplete below is the missing part of your question
Question : How does the direction and magnitude of Fe compare to Fg
answer : Not enough information is given
Explanation:
From the above information given in the question the direction and magnitude of FE cannot be compared to Fg and this is simply because the mass of the particle that force is been exerted on is not given therefore we cannot ascertain the magnitude of the gravitational force. Therefore we can conclude that not enough information is given
Which planet has the most important role in changing the direction of a comet's path?
A.
Earth because of its atmosphere of nitrogen and carbon dioxide
B.
Mars because of its position near the asteroid belt
C.
Jupiter because of its strong gravitational force
D.
Saturn because of its large ring system
Answer:
C.
Jupiter because of its strong gravitational force
Explanation:
Jupiter planet has the most important role in changing the direction of a comet's path. The correct option is C.
What are gravity and gravitational force?Gravity is a fundamental force in the universe that causes objects with mass or energy to attract one another. It is a force of attraction between any two objects in the universe that have mass. The force of gravity is directly proportional to the masses of the objects and inversely proportional to the distance between them.
Mathematically,
F=G×m1×m2/r²
The gravitational force is the force of attraction between two objects due to their masses. It is the force that causes objects to be drawn toward one another.
The strength of the gravitational force between two objects is determined by the mass of each object and the distance between them. The larger the mass of an object, the greater its gravitational force, and the closer two objects are, the greater their gravitational force.
Gravitational force is responsible for keeping the planets in orbit around the sun, for the tides on Earth, and for many other natural phenomena. The gravitational force is one of the four fundamental forces of nature, along with the strong nuclear force, the weak nuclear force, and the electromagnetic force.
Here in the question
Jupiter's strong gravitational force can significantly influence the trajectory of a comet, causing it to change direction or even collide with the planet. This is due to Jupiter's massive size, which creates a powerful gravitational pull that can affect objects within its vicinity. In fact, Jupiter is often referred to as the "vacuum cleaner of the solar system" because it has such a strong gravitational pull that it can attract and capture comets and asteroids.
Hence C. Jupiter because of its strong gravitational force, plays a most important role in changing the direction of a comet's path.
To learn more about gravitational force click:
https://brainly.com/question/12528243
#SPJ2
I can someone help me and also I gtg so ill be back in a bit
Answer: No sure what to do
Explanation: points for points
how is water useful to our body
Answer:
It keeps our body hydrated.
Explanation:
Identify the different parts of the face
Answer:
head
four head
hair
eyes
ears
nose
lips
chick
chin
eyebrow
eyelid
What are two ways you can increase power by climbing the stairs?
Answer:
Eat vegetables and make the stairs
Explanation:
because when the stairs are less deep you use less forced to go up them.
What is Carnot engine ?
A Carnot heat engine is a theoretical engine that operates on the Carnot cycle. The basic model for this engine was developed by Nicolas Léonard Sadi Carnot in 1824. ... In the process of going through this cycle, the system may perform work on its surroundings, thereby acting as a heat engine.
what are the objectives of the tourist for visiting Nepal write in points
Answer:
The objectives of the tourist for visiting Nepal are .
It is naturally decorative .Highest mountain ️ of the world mt.everest is situated in Nepal .many rivers are there for rafting .different types of land and climate can be found .many historical , religious and cultural site are present here to visit .hope it is helpful to you ☺️
Much of the United States electricity is produced by the use of coal. Starting with the energy radiating from the sun, and ending with the production of electricity, trace the many conversions of the energy involved. Within your response be sure to
• Include the key terms of mechanical, chemical, kinetic, and potential energy.
Answer:
Chemical energy to heat energy to kinetic energy to electrical energy
During a testing process, a worker in a factory mounts a bicycle wheel on a stationary stand and applies a tangential resistive force of 130 N to the tire's rim. The mass of the wheel is 1.70 kg and, for the purpose of this problem, assume that all of this mass is concentrated on the outside radius of the wheel. The diameter of the wheel is 50.0 cm. A chain passes over a sprocket that has a diameter of 8.75 cm. In order for the wheel to have an angular acceleration of 3.50 rad/s2, what force, in Newtons, must be applied to the chain
Answer:
The force that must be applied to the chain in order for the chain to have the given acceleration is approximately 694.2 N
Explanation:
The given restive force, [tex]F_f[/tex] = 130 N
The mass of the wheel, m = 1.70 kg
The diameter of the wheel, D = 50.0 cm
∴ The radius of the wheel, R = 50.0 cm/2 = 25.0 cm = 0.25 m
The diameter of the sprocket over which the chain passes, d = 8.75 cm
The radius of the sprocket over which the chain passes, r = 8.75 cm/2 = 4.375 cm = 0.04375 m
The angular acceleration, α = 3.50 rad/s²
Torque, τ = I·α
Where;
I = The moment of inertia = m·R²·α
The net torque = The applied torque - The friction torque
Therefore, we get;
I × α = m × R² × α = F × r - [tex]F_f[/tex] × R
1.70 kg × (0.25 m)² × 3.50 rad/s² = F × 0.04375 m - 120 N × 0.25 m
F = (1.70 kg × (0.25 m)² × 3.50 rad/s² + 120 N × 0.25 m)/(0.04375 m) = 694.214286 N
The force that must be applied to the chain in order for the chain to have the given acceleration, F ≈ 694.2 N
What is the speed of a wave in (m/s) with a 5 meter wavelength and a period of 20 seconds?
Answer: 0.25 m/s
Explanation: Speed = wavelengt · frequency
v = λf and frequency is 1/period f = 1/T
Then v = λ/T = 5 m / 20 s = 0.25 m/s
As Jack pulls his wagon down the street it moves faster and faster. Jill, sitting a few meters ahead on the sidewalk, wants to slow Jack's wagon down so that it travels with a constant speed. How can Jill accomplish her goal? A) Push the wagon with a force greater than Jack. B) Push Jack away from the wagon so that he is no longer pulling it. C) Pull on the wagon in the opposite direction with twice Jack's force. D) Push the wagon in the opposite direction at a constant force less than Jack.
Answer:
The correct answer is NONE the two forces must be equal and of opposite direction, the closest answer is D
Explanation:
In this exercise it is indicated that Jack pushes a car, it is desired that Jill pushes the car so that the speed is constant
take as positive the direction of Jack's thrust
F_jack - F_jill = 0
F_jill = F_jack
therefore the push of the two must be equal and Jill's push must have the opposite direction to Jack's push.
The correct answer is NONE the two forces must be equal and of opposite direction, the closest answer is D
What do oxygen and bromine have in common ?
Answer:
oxygen and bromine are both highly reactive. they are also both nonmetals
Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of:
Answer:
1 ohm
Explanation:
since there are two identical resistors, one resistor will be
R = [tex]\frac{4}{2}[/tex] =2ohm [ proven as in series [tex]R_{e} = 2 + 2 = 4ohm[/tex] ]
to calculate the equivalent resistance when in parallel:
[tex]\frac{1}{R_{e} } = \frac{1}{R_{1} } + \frac{1}{R_{2}}[/tex]
so,
[tex]\frac{1}{R_{e} } = \frac{1}{2} + \frac{1}{2}[/tex]
[tex]R_{e} = 1ohm[/tex]
Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of 1 ohm.
What is ohm?In a parallel circuit, voltage is thee same across each component in the circuit. The sum of the currents through each path is equal to the current from the source. However, the resistance cannot be added directly. It is calculated as:
1/Rt = 1/R1 + 1/R2 + 1/R3 1/Rt = 1/6.8 + 1/9.0 + 1/15
Rt = 3.08 ohms.
When resistors are connected in parallel, the equivalent resistance R will be less than the least resistance.
1/R = 1/R1 + 1/R2 + 1/R3 + 1/R4 + 1/R5
Since the 5 resistors are 10 ohms each, substitute them in to the formula
1/R = 1/10 + 1/10 +1/10 + 1/10 + 1/10
The LCM = 10
1/R = 5/10
Reciprocate both sides
R = 10/5 = 2 ohms
Therefore, Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of 1 ohm.
Learn more about equivalent resistance on:
https://brainly.com/question/13606415
#SPJ5
A 25 N force stretches a spring 0.280 m. What was the spring constant?
Answer:
the spring constant is -89.2857 n/m
Explanation:
The computation of the spring constant is shown below:
As we know that
Force in newtons = Spring constant × amount of extension
F = -k × x
where
F = 25 N
And, x = 0.280m
So, the spring constant would 2
= 25N ÷ 0.280 m
= -89.2857 n/m
Hence the spring constant is -89.2857 n/m
I need help on this it need me to label thermal, chemical nuclear, electric, mechanical, electromagnetic
Answer:
grill is thermal,bike is mechanical, nuclear human,electric the phone and the copter, human would also be chemical so give em a stsr and explain, electro magnetic would be the helicopter
In the compound MgCl2, how many atoms of Mg are there?
The diagram below shows a light ray striking a plane mirror surface at an angle of 40° to the normal.
Which of the following diagrams shows the ray that is reflected from the plane mirror surface?
Answer:
we need to see all of the options
Explanation:
Which two structures are not found in animal cells?
A) vacioles and ribosomes
B) chloroplasts and ribosomes
C) cell walls and chloroplasts
D) endoplasmic reticulum and cell walls
Answer:
C
Explanation:
So, lets start off by thinking about what we know is in both cells, and rule out from there.
There are just some basic things you need in eukaryotic cells, those include the following:
Nucleuscell membranemitochondriacytoplasm(dont get confused with chloroplast)Rough and smooth endoplasmic reticulumGolgi vescileGolci apparatusNucleolus(Dont get confused with nulceus)Here are jsut a few examples of what can be found in both plant and animal cells, however we can already rule out all of the following except for:
C
Because remember, c talks about the chlorplast, which is not the chlorplasm found in both plant anf animal cells, its just the chloroplast found in plant cells.
Although I gave the asnwer to you. Here are some things that are in plant cells that arent in animal cells:
Cell wallvaciolescentral vaciolechlroplastplastidsAnimal cells on the other hand, have a few things that plant cells do not as well:
LysomeCentrolsomeHope this helps! ;)
Work out the area of a rectangle with base, b=20mm and perimeter, p=50mm
Answer:
100mm²
Explanation:
the other side: (50 - 20 × 2) ÷ 2 = 5
5 × 20 = 100
Answer:
Subtract given lengths: 50 - 20 = 30
Divide by 2 since there are 2 missing sides that need a length: 30 divided by 2 = 15
With the given side lengths multiply all of them to get your area.
15 x 20 = 300 is your area I am pretty sure.
An 8.8-magnitude earthquake in Chile in 2010 killed more than 700 people. On January 12, 2010, a less powerful earthquake, measuring 7.0, killed more than 200,000 in Haiti. Why do you think this happened?
Answer:
The main reason for this is the engineering and technology driven building construction in Chile than in Haiti
Explanation:
The main reason for this is the engineering and technology driven building construction in Chile than in Haiti. Most of the buildings in Haiti do not fit in the building byelaws norms as most of them were constructed in a short period of time with less engineering and at cheaper rate. While building in Chile were built adhering to the building codes and byelaws.
The base of the building is Chile were separated from each other using the “base isolation” technology and the were also more flexible as compared to the buildings in Haiti.
The skyscrapers in Chile were constructed in a way that they can float on the arrangements of ball bearings and padded cylinders
How many joules are utilized when
warming 5g of steam from 100°C to 120°C?
Answer:
Q=mc(T2-T1)
Explanation:
Ti is the temperature
m is mass
c is specific heat capacity for steam
Q is heat, [Q]=J
Sounds that reflect off of hard surfaces can create an echo.
O True
O False
Answer: True
Explanation:
2 ways in which the effects of friction can be minimised in the experiment
Answer:
Friction can be minimized by using lubricants like oil and grease and by using ball bearing between machine parts. A substance that is introduced between two surfaces in contact, to reduce friction, is called a lubricant. Fluid friction can be minimized by giving suitable shapes to the objects moving in the fluids.
Explanation:
hope it helps
1. interpret data- based on the data, describe what alicia did.
2. draw conclusions- what conclusions can you draw? what does stirring do in terms of heat transfer?
help :(