Answer:
surf (S)
tide (T)
champion (C)
Explanation:
wag mo nlng pansinin
One of the pieces of evidence supporting energy quantization was the line spectra of elements. Why does this demonstrate energy quantization?
a) Photons are packets of energy that act both as a particle and a wave.
b) The spectra is continuous and shows emission at all wavelengths.
c) There are sharp emission lines demonstrating discrete energy levels.
d) All compounds emit light in the ultraviolet and visible regions specifically.
Answer:
c) There are sharp emission lines demonstrating discrete energy levels.
Explanation:
When an element emits energy in the form of radiation, it produces a spectrum of colors on a photographic plate. This spectrum can either be continuous or discrete. In continuous spectrum the spectrum continues without any discrimination between two regions. This represents the continuous emission of radiation, and thus the continuous emission of energy without any break.
On the other hand, the line spectrum consists of discrete and sharp lines, which shows the emission of radiation in a certain amount in a certain time, with a break between emission. Hence, the line spectra supports the quantization of energy.
The correct option is:
c) There are sharp emission lines demonstrating discrete energy levels.
i'll mark brainliest if you can answer this quick and correctly only correct cause i don't accept bad answers or i'll report you if i get a bad grade
'
does anyone know how to do this??????
Answer:
you have to answer about what Emmy Noether was known for and how she accomplished her goal! For example Dr. Martin Luther King was known for his peaceful protests and his famous "I Have a Dream". He accomplished this goal by never giving up and sticking to his morals! I hope this helped!! ♡♡ (BTW love your profile picture)
1. Which family of elements is most likely to lose electrons?
2. Which family of elements is most likely to gain electrons?
Answer:
Elements that are metals tend to lose electrons and become positively charged ions called cations.
Elements that are nonmetals tend to gain electrons and become negatively charged ions called anions.
Hope it helps:)
Metal are the family of elements which is most likely to lose electrons. Non metals are the family of elements which is most likely to gain electrons.
What is element?The quantity of protons an element has defines it. An element's atoms all contain the same amount of protons, but its electron and neutron counts might vary. Ions are produced by altering the electron to proton ratio, whereas isotopes are produced by altering the neutron count.
118 known elements are present. A study is being done to create element 120.1. The periodic table will have to be modified to include element 120 after it has been created and validated. Metal are the family of elements which is most likely to lose electrons.
Therefore, metal are the family of elements which is most likely to lose electrons.
To know more about element, here:
https://brainly.com/question/29545466
#SPJ6
When you mix copper and tin, you make bronze. No chemical reaction occurs.
What is bronze?
O A. An element
B. A compound
O C. An alloy
O D. A molecule
SUBMIT
Answer:
C. Alloy
Explanation:
Bronze is an alloy because the creations of alloys are not chemical reactions. An alloy is made when a metal is combined with another metal or a nonmetal.
.What threatens the newly hatched chicks?
Answer:
rats. that's all i know of Just about everything except the mother hen if they are natural hatch. Even when you incubate them there are threats. The healthy chicks will mob the weak ones, the older chicks (even by a day) will pick on the younger ones. Temperature extremes will threaten them as they need warm, humid conditions with gradual drops in surrounding temps in the brooder box. Early disease is sometimes a problem and all chicks should be started on medicated chick feed for the first few weeks to prevent several digestive diseases. Even the water dispenser can be a threat as newly hatched chicks will immerse themselves in an open water container so care should be taken to supply water in a self feeding covered dish.
Explanation:
Answer:
im pretty sure its just rats and the mother hen if the chick isn't healthy
Explanation:
A hypothesis is ______ to explain a set of observations.
1 one possible way
2 the correct method
3 a factual statement
4 a set of data
Answer:
1
Explanation:
one possible way its just a theory of what the answer could be
Answer:
3-a factual statement
Explanation:
A hypothesis is a factual statement to explain a set of observations.
Use the information given to calculate the average atomic mass of element Z. Z- 56 is 70% abundant and Z-59 is 30% abundant.
Answer:
56.9 amu
Explanation:
Depending on the number of isotopes an element has, the Average atomic mass of isotopes of an element can be calculated using:
(atomic mass of isotope1 × decimal abundance of isotope1) + (atomic mass of isotope2 × decimal abundance of isotope2)
According to this question, two isotopes of element Z were given
- Isotope Z- 56 with atomic mass 56 is 70% abundance. This means that its decimal abundance is 0.70
- Isotope Z- 59 with atomic mass 59 is 30% abundance. This means that its decimal abundance is 0.30
Therefore, average atomic mass of element Z is:
= (56 × 0.70) + (59 × 0.30)
= (39.2) + (17.7)
= 56.9
Convert 0.0134 Liter to millimeter
Answer:
13400 millimeters.
Explanation:
Multiply the volume value by 1e+6
Define Each Piece of the Microscope
Describe What Each Microscope Lens Does
Describe How The Microscope Magnification Lens Works
1) Body tube (Head): The body tube connects the eyepiece to the objective lenses. Arm: The arm connects the body tube to the base of the microscope. Coarse adjustment: Brings the specimen into general focus. Fine adjustment: Fine tunes the focus and increases the detail of the specimen.
2)Microscopes are made up of lenses for magnification, each with their own magnification powers. Depending on the type of lens, it will magnify the specimen according to its focal strength.
3)In simple magnification, light from an object passes through a biconvex lens and is bent (refracted) towards your eye. ... The eyepiece lens usually magnifies 10x, and a typical objective lens magnifies 40x. (Microscopes usually come with a set of objective lenses that can be interchanged to vary the magnification.)
Explain how your answer to CTQ 6 is consistent with your answer to CTQ 5.
Answer:
up 1
Explanation:
the human eye has three types of cones cells. damage to any one of the types of cone cells doesn't cause total blindness because of the
A. presence of rod cells
B. other two functional Cone cells
C. presence of optic nerves
they have rod cells - this helps them be able to see colors through a spectrrum located in the retina
How can charged objects interact without touching
If a boulder sits at rest on top of a mountain what conclusion can be made about the forces acting on the
A boulder sits at rest on top of a mountain. What conclusion can be made about the forces acting on the boulder? The forces acting on the boulder are balanced (net force equals zero).
If a boulder sits at rest on the top of the mountain , the forces acting on the boulder are zero as it is in the state of rest.
What is a force?
Force is defined as a cause which is capable of changing the motion of an object. It can cause an object which has mass to change it's velocity. It is also simply a push or a pull . It has both magnitude as well as direction.Hence, it is a vector quantity.
It has SI units of Newton and is represented by'F'.Newton's second law states that force which acts on an object is equal to momentum which changes with time. If mass of object is constant, acceleration is directly proportional to net force acting on an object.
The concepts which related to force are thrust and torque .Thrust increases the velocity of an object and torque produces change in rotational speed of an object.
Learn more about force,here:
https://brainly.com/question/1675020
#SPJ2
In this simulation, you will be exploring the relationship between temperature and pressure while keeping volume
constant. Click here to begin. Select the Explore box. Answer the questions as you perform the steps.
1. Raise and push down the pressure pump handle to add gas molecules to the container. The initial temperature is
300 K (27º) and the pressure has a range of 5.4-6.2 atm. Notice the pressure values change as the particles
collide with the wall.
2. Click on the bucket to raise the temperature of the container to approximately 400 K (127°C). What happened to
the pressure?
Approximately what pressure range did you observe?
3. Click on the bucket to reduce the temperature to approximately 200 K (-73°C). What happened to the pressure?
Approximately what pressure did you observe?
4. What gas law mathematically shows the relationships between temperature and pressure?
Answer:
increased, 7.5-8.3 atm; decreased, 3.5-4.3 atm; Gay-Lussac's Law
Explanation:
1. The collision of gas molecules, results in the pressure increases.
2. The pressure of the system with an increase in the temperature has been 7.2-8.2 atm.
3. The pressure of the system with a decrease in the temperature has been 3.6-4.1 atm.
4. The relationship between the molecules has been given by Gay-Lussac's Law.
The relationship between the temperature and pressure has been given in the gaseous molecules with the ideal gas equation.
1. The temperature has been directly proportional to the temperature. Thus, with an increase in pressure, there has been an increase in temperature and vice versa.
With the collision of the gas molecules with the wall, there has been the liberation of the energy that increases the temperature. The increase in temperature mediates the increase in pressure.
Thus, with the collision of gas molecules, the pressure increases.
2. The relationship between the pressure and temperature has been given as:
[tex]\dfrac{P1}{T1}=\dfrac{P2}{T2}[/tex]
The initial temperature [tex]T1=300\;\text K[/tex]
Final temperature [tex]T2=400\;\text K[/tex]
Initial pressure, [tex]P1=5.4-6.2\;\text {atm}[/tex]
Final pressure, [tex]P2[/tex]
Substituting the values for calculating P2 as:
[tex]\rm \dfrac{5.4-6.2\;atm}{300\;K}=\dfrac{P2}{400\;K}\\\\\textit P2 = \dfrac{5.4-6.2\;atm}{300\;K}\;\times\;400\;K\\\\\textit{P}2=7.2-8.2\;atm[/tex]
The pressure of the system with an increase in the temperature has been 7.2-8.2 atm.
3. The pressure with the reduction of temperature has been given by :
[tex]\dfrac{P1}{T1}=\dfrac{P2}{T2}[/tex]
The initial temperature [tex]T1=400\;\text K[/tex]
Final temperature [tex]T2=200\;\text K[/tex]
Initial pressure, [tex]P1=7.2-8.2\;\text {atm}[/tex]
Final pressure, [tex]P2[/tex]
Substituting the values for calculating P2 as:
[tex]\rm \dfrac{7.2-8.2\;atm}{400\;K}=\dfrac{P2}{200\;K}\\\\\textit P2 = \dfrac{7.2-8.2\;atm}{400\;K}\;\times\;200\;K\\\\\textit{P}2=3.6-4.1\;atm[/tex]
The pressure of the system with a decrease in the temperature has been 3.6-4.1 atm.
4. The relationship between the molecules has been given by Gay-Lussac's Law. The law states that pressure has been directly proportional to the absolute temperature of the system.
For more information about pressure of gas molecules, refer to the link:
https://brainly.com/question/15863086
The electronic structure of the atom X is : 2, 8, 1
A. In which group atom x is found:—————-
B. In which period atom x is found:—————
C. What is the name of atom x:———————-
Answer:
A. grou(I)
B. 3rd period
C. Sodium (Na)
Explanation:
it belongs to group (I) since it has one valence electron
it belongs to 3rd period since it has three energy levels
How to do ionic equations
Answer:
Write the ionic equation by breaking all the soluble ionic compounds into their respective ions. Each ion should be shown with its charge and an to show that it is present in solution. Use coefficients to show the number of each ion present.
Explanation:
Hope this helps and I hope you have a wonderful day! Spread the love!
What is the charge of protons?
Answer:
protons naturally have the charge of +1
Answer:Protons have a positive electrical charge of one (+1) and a mass of 1 atomic mass unit (amu), which is about 1.67×10−27 kilograms
Explanation:
How many moles (of molecules or formula units) are in each sample?
A) 32.66 g CF2Cl2
B) 24.2 kg Fe (NO3) 2
C) 0.5912 g C8H18
D) 104 kg CaO
Express all answers to 4 sig figs
Answer:
A = 1.627 ×10²³ molecules of CF₂Cl₂.
B = 809.4 ×10²³ molecules of Fe(NO₃)₂.
C = 0.03117 ×10²³ molecules of C₈H₁₈.
D= 1116 ×10²³ molecules of CaO.
Explanation:
A)
Given data:
Mass of CF₂Cl₂ = 32.66 g
Number of moles = ?
Number of molecules = ?
Solution:
Number of moles = mass/ molar mass
Number of moles = 32.66 g/ 120.9 g/mol
Number of moles = 0.2701 mol
Number of molecules:
1 mole = 6.022×10²³ molecules
0.2701 mol×6.022×10²³ molecules / 1mol = 1.627 ×10²³ molecules of CF₂Cl₂.
B) Given data:
Mass of Fe(NO₃)₂ = 24.2 Kg (24.2×1000 = 24200 g)
Number of moles = ?
Number of molecules = ?
Solution:
Number of moles = mass/ molar mass
Number of moles = 24200 g/ 180 g/mol
Number of moles = 134.4 mol
Number of molecules:
1 mole = 6.022×10²³ molecules
134.4 mol×6.022×10²³ molecules / 1mol =809.4 ×10²³ molecules of Fe(NO₃)₂.
C) Given data:
Mass of C₈H₁₈= 0.5912 g
Number of moles = ?
Number of molecules = ?
Solution:
Number of moles = mass/ molar mass
Number of moles = 0.5912 g/ 114.22 g/mol
Number of moles = 0.005176 mol
Number of molecules:
1 mole = 6.022×10²³ molecules
0.005176 mol×6.022×10²³ molecules / 1mol =0.03117 ×10²³ molecules of C₈H₁₈.
D) Given data:
Mass of CaO = 104 Kg (104×1000 = 104,000 g)
Number of moles = ?
Number of molecules = ?
Solution:
Number of moles = mass/ molar mass
Number of moles = 104,000 g/ 56.1 g/mol
Number of moles = 1854 mol
Number of molecules:
1 mole = 6.022×10²³ molecules
1854 mol×6.022×10²³ molecules / 1mol = 1116 ×10²³ molecules of CaO.
A sample has a PH of 4, and another sample has a PH of 9. Which sub is the base? How many times basic is it??
Answer:
the first one
Explanation:
the first one is the base because it has a lower PH
what is the basis of modern periodic table?
Explanation:
The periodic table is an arrangement of the chemical elements, organized on the basis of their atomic numbers, electron configurations and recurring chemical properties.
What does a subscript indicate in a chemical formula?
A. The number of atoms of that element in the molecule
B. The number of bonds that element forms in the molecule
C. The position in the molecule that element occupies
D. The atomic number of the element in the molecule
Answer:
The number of atoms of that element in the molecule
Explanation:
You're welcome
determine the density of a liquid if 75 mL of the liquid have a mass of 63 g
Answer:
The answer is 0.84 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question
mass = 63 g
volume = 75 mL
We have
[tex]density = \frac{63}{75} = \frac{21}{25} \\ [/tex]
We have the final answer as
0.84 g/mLHope this helps you
How much force is required to accelerate a 12 kg mass at 5 m/s2?
Answer:
The answer is 60 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 12 × 5
We have the final answer as
60 NHope this helps you
i need help ' please
Answer:
s orbitals - spherical shape
p orbitals - dumbbell shape
d orbitals- dxy, dyz , dzx -double dumbbell
- dx²-y²- double dumbbell (along axis)
-dz² -dumbbell with electron cloud
( along the axis)
therefore here the answer is 2s and 3s
1. In part 1, you collected data about how the amount of sugar affects the amount of gas produced. Analyze those data and draw a conclusion. (16 points) a. What gas inflated the balloons? (2 points)
Answer:
carbohydrate is an essential biomolecule so the affect of suger fluctuates when enzyme consumes the substrates of glucose molecules
Political considerations played a great role in the decision for the United States to enter the Space
Race.
True
False
True
The Cold War & tensions with Russia led to the great Space Race. Getting into space was a goal of the US as well as Russia and whomever got into space would be considered superior in the world's perspective
What is the volume of a box that has a length of 5 cm a width of 7 cm and a height of 9 cm
Answer:
V = L × w × h
V = 5 × 7 × 9
V = 315 cm³
The density of a material is a/an
(PLS HELP will mark brainliest!) Compare and contrast the alkali metals and the alkaline earth metals. Discuss their physical and chemical properties, their magnetic properties, and their electron configurations.
Answer:
I have a picture from my excerpt that basically answers all of that!
Hope it helps!
Explanation:
The attachment
The alkali metals and alkaline earth metals has different physical and chemical properties due to difference in their valence electrons.
Comparison of physical and chemical properties of alkali metals and the alkaline earth metals. Alkali Metals Alkaline earth metals·Electronic [Noble gas]ns1 [Noble gas]ns2
configuration
·Reactivity Comparatively more reactive Comparatively less
reactive
·Hardness Soft and can be cut by sharp Comparatively harder
knife
·Valency One valence electron Two valence electron
·Ionic charge +1 +2
To learn more about Alkali Metals and Alkaline earth metals here.
https://brainly.com/question/18722874
#SPJ3