Answer:
Police powers refer to the legal authority given to law enforcement officers to maintain public safety, prevent crime, and enforce laws. While police officers are allowed to use force to carry out their duties, they are also required to use only the necessary amount of force needed to resolve a situation.
Acceptable situations where police officers may use force without causing death or resorting to deadly force may include scenarios such as:
Arresting a suspect who is resisting arrest: If a suspect is resisting arrest or attempting to flee, police officers may use reasonable force to detain them. This could include using handcuffs or physical force to subdue the suspect, but it should not cause any serious injury or death.
Preventing harm to self or others: In situations where individuals are posing a threat to themselves or others, police officers may use force to prevent harm. For example, if a person is threatening to harm themselves or others, police officers may use non-lethal force, such as pepper spray or a taser, to disarm them and bring them under control.
Controlling violent or dangerous situations: If a situation is violent or dangerous, police officers may use force to control the situation and protect civilians. This could include using non-lethal weapons, such as batons or rubber bullets, to subdue violent or aggressive individuals.
Enforcing laws: In situations where individuals are breaking the law, police officers may use force to enforce the law and bring the situation under control. For example, if a person is engaging in a physical altercation in public, police officers may use force to break up the fight and prevent further violence.
In all of these situations, police officers are expected to use only the necessary amount of force needed to resolve the situation and should avoid causing serious injury or death whenever possible. It is important for police officers to receive proper training in the use of force to ensure they can make sound decisions and use appropriate levels of force when necessary.
Explanation:
Access Help defaults to searching for information on the ____.
Answer:
Access Help defaults to searching for information on the current version of Access installed on your computer.
Explanation:
Why data centers are so secure and why is it built?
To prevent any unauthorized breaking into the data center.
It is built to store data from users.
You started a business at home doing editing work. People share their manuscripts with you, and you do language editing and document formatting. Which type of computer will you need for this business? Mention two types of computers that
you could buy (2 points) and give the pros and cons of each (3 points)
Two types of computers that could be considered are desktops and laptops.
DesktopsLaptopsWhat is a Desktop?Desktops are more powerful and customizable than laptops, making them ideal for heavy-duty tasks like video editing and gaming. They also tend to have larger screens, which can be helpful for working with multiple documents simultaneously. However, they are not portable and take up more space than laptops.
Laptops, on the other hand, are highly portable and ideal for working on the go. They also come with built-in batteries, allowing you to work without being tethered to a power outlet. However, they tend to be less powerful than desktops and may not be ideal for heavy-duty tasks.
Read more about computers here:
https://brainly.com/question/28498043
#SPJ1
Write a program that’s asks for the number of checks written during the past month, then computers and displays the banks fees for the month. (PYTHON))
Write short notes on the following with the help
of an example mentioning their use in the
programs : 10 × 2 = 20
(a) getch( )
(b) void( )
(c) gets( )
(d) + + (increment operator)
(e) – – (decrement operator)
(f) % operator
(g) break statement
(h) # define
(i) fseek( )
(j) Goto statement
Answer: (a) getch(): The getch() function is used to read a single character from the keyboard without echoing it on the screen. It is commonly used in programs that require user input. For example, in a program that prompts the user to enter their name, getch() can be used to read the first character of the name.
(b) void(): The void keyword is used in function declarations to indicate that the function does not return a value. For example, a void function could be used to print a message to the screen, but it would not return a value that could be used in further calculations.
(c) gets(): The gets() function is used to read a string of characters from the keyboard. It reads input until a newline character is encountered. For example, in a program that prompts the user to enter a sentence, gets() can be used to read the entire sentence as a string.
(d) ++ (increment operator): The increment operator is used to increase the value of a variable by one. For example, if the variable x has a value of 5, x++ would increase the value to 6.
(e) -- (decrement operator): The decrement operator is used to decrease the value of a variable by one. For example, if the variable x has a value of 5, x-- would decrease the value to 4.
(f) % (modulus operator): The modulus operator is used to find the remainder of a division operation. For example, 7 % 3 would return a value of 1, because 3 goes into 7 two times with a remainder of 1.
(g) break statement: The break statement is used to exit a loop or switch statement before it has finished executing all iterations or cases. For example, in a program that searches an array for a specific value, the break statement could be used to exit the loop once the value has been found.
(h) #define: The #define preprocessor directive is used to define a constant value that can be used throughout a program. For example, #define PI 3.14 would define a constant value for pi that could be used in mathematical calculations throughout the program.
(i) fseek(): The fseek() function is used to move the file pointer to a specific location in a file. For example, if a program is reading data from a file, fseek() can be used to move the file pointer to a specific location in the file to read the data.
(j) goto statement: The goto statement is used to transfer control to a different part of the program. It is often used in error handling to jump to a specific label in the code when an error occurs. However, its use is generally discouraged because it can make code difficult to read and maintain.
This took me a while Brainiest Appreciated (:
Choose the best answer to fill in the blank:
When you create a piece of writing that analyzes a website, you are using
information from the website under ______ guidelines.
OA. fair use
B. creative
C. academic
D. media review
Answer:
Fair use is the answer.
Explanation:
In my opinion I think copyright is better for a choice...
Pull the dollar amount that is being discounted for each of the products that are currently on markdown. Add this new column onto the end of your results and call it discount_amount.
Want a hint?
The discount amount
Add the sale price to the purchase price. Use the formula "=D2-C2" to add a new column called "discount amount" to the current results table. Duplicate this formula down to all rows.
What is the Excel formula for subtraction?To begin a formula, click any empty cell, type the equal symbol (=), and then press Enter. Type a few numbers separated by a minus sign after the equal sign (-). 50-10-5-3, as an illustration. CLICK RETURN.
Why is it referred to as a concession rate?The term "discount rate" is used to examine a sum of money that will be received in the future and determine its present worth. The definition of the word "discount" is "to deduct a sum." To determine a future value of money, a concession rate is subtracted.
To know more about column visit:-
https://brainly.com/question/13602816
#SPJ1
Ashley has included a bar graph in a term paper she’s authoring using a word processor. To make sure that the graph is not cut off when printed, she decides that the page with the graph should be printed horizontally. What should Ashley do?
A.
change the paper size of the page on which the graph is included
B.
set landscape orientation for the page on which the graph is included
C.
decrease the margins of the page on which the graph is included
D.
zoom out of the page on which the graph is included
The thing that Ashley need to or should do is option B. set landscape orientation for the page on which the graph is included
What is the word processor about?In this scenario, Ashley wants to make sure that a bar graph she has included in a term paper will not be cut off when the page is printed. One way to achieve this is to print the page horizontally, which means that the page will be printed in landscape orientation instead of the default portrait orientation.
Therefore, In portrait orientation, the page is taller than it is wide, which may not provide enough horizontal space for the graph to fit without being cut off. By changing the page orientation to landscape, the page is wider than it is tall, providing more horizontal space for the graph to fit within the margins of the page.
Read more about word processor here:
https://brainly.com/question/985406
#SPJ1
I need help with a c# assignment. I am using Visual Studios and need it done with basic c# coding. It is a GUI application.
INSTRUCTIONS
For this assignment, you are required to create the GUI for a timekeeping/payroll system for
CMS.
The system should first allow an employee to enter his name and record the time he worked on
each project for a given week. Using the spreadsheet above as a guideline, the system must
allow the user to enter his name and the name of his supervisor. Next, the user must enter the
number of the week for which he is entering time. Assume a maximum of 52 weeks in a year.
Make sure the employee enters only a valid week number.
To record an employee’s hours, the user must enter the name of a client, a client’s contract, and a
project. For each of the seven days in a week, the user must enter hours worked or check a box
that indicates the day is a weekend, a holiday, or a vacation day. If the employee fails to enter
any hours for a day and fails to check the weekend/holiday/vacation box for that day, the system
should warn the user that the given day is missing information. The system should also ensure
that if any work hours are entered for a day, the checkbox for that day should NOT be checked.
Finally, the system should ensure that a user cannot enter more than 24 hours in a single day.
Once the hours are entered, the user should be able to “Submit” his hours by clicking a button
that will calculate his payroll information for the week and display it on the same screen.
Payroll information is calculated as follows:
All employees are paid for hours worked at a rate of $15 US dollars per hour. If the number of
hours worked in the week exceeds 40, the employee is paid time and a half for his overtime
hours. For example, assume an employee works 50 hours during a week, he will receive (40 X
$15) + (10 overtime hours X (1.5 X $15)) = $825.00. If an employee works less than 40 hours in
a week, the system should make note of this fact in a label beside the supervisor’s name.
1. Create a new Windοws Fοrms Applicatiοn prοject in Visual Studiο.
2. Design the GUI fοr the timekeeping/payrοll system. Add text bοxes, labels, buttοns, and checkbοxes as needed.
3. Write cοde tο validate the user input. Make sure the week number entered by the user is between 1 and 52. Alsο, make sure that the user enters valid wοrk hοurs (between 0 and 24) and checks the apprοpriate checkbοx if they did nοt wοrk that day.
4. Calculate the payrοll infοrmatiοn when the user clicks the "Submit" buttοn. Use cοnditiοnal statements tο determine if the emplοyee wοrked οvertime and calculate their pay accοrdingly.
5. Display the payrοll infοrmatiοn οn the same screen using labels οr text bοxes.
What is GUI?GUI stands fοr Graphical User Interface. It is a type οf user interface that allοws users tο interact with a cοmputer οr sοftware applicatiοn using graphical elements such as icοns, buttοns, text bοxes, menus, and οther visual elements.
To know more about windows visit:
brainly.com/question/27198171
#SPJ9
Amazon job assessment question
*Email from training team:
This is a reminder that your required Customer Obsession Training is due by the end of the day today. You must complete this training for your team to meet the 100% goal.*
*Task: You can work 8 hours today. Based on the information below about your current work, rank order the activities you will complete today.*
I feel like it should be in the order of the photo attached but the “expert” answer I’m seeing on here says it should be 1. Project 2. Issue 3. Meeting 4. Training
This makes no sense to me. First, I think the customer issue should be first because customer care is the most important part of being a customer support specialist. Also, the training MUST be completed by the end of day that day. If both of the 4 hr activities are first, you’ve already worked your 8 hrs. Saving the training until tomorrow is going against what you were told to do. And the team meeting, while not AS important as the others, is still something that should be attended for many reasons. There is also no information stating that the project is due that day. If the answers are put in the order in the photo, every activity will have progress made. Only two hours will have been completed on the project but that’s halfway done. You could finish the remaining two hours the next day and have nothing else to “make up”. I genuinely don’t understand why the answer I’ve seen is not even close to this so will someone please explain it to me???
The order in which the activities should be completed may depend on the specific context of your work and the urgency of each task.
How to explain the rankingHowever, here is a possible explanation for the order suggested in the answer you saw:
Project: The project may be a priority because it requires four hours of work and it may have a specific deadline that needs to be met. Completing the project first allows you to make significant progress and ensures that you are meeting your obligations to your team and your employer.
Issue: Addressing customer issues is indeed important and should not be neglected. However, the suggested answer assumes that the customer issue is not urgent and can be addressed in the remaining four hours of your workday.
Meeting: Attending team meetings is important for collaboration and communication with colleagues. However, if the meeting is not a top priority, it can be scheduled for later in the day or even postponed to another day.
Learn more about activities on;
https://brainly.com/question/26654050
#SPJ1
in cell e2, enter a formula using TEXTJOIN
Understand the processes,
methods and information that
are used in the diagnostic
process
Describe the steps of the diagnostic process including:
– fault validation
– information gathering
– information analysis
– solution identification
The diagnostic process refers to the series of steps followed by healthcare professionals, technicians, and other professionals to identify the cause of a problem or symptom in a patient or system. The process involves a systematic approach that includes fault validation, information gathering, information analysis, and solution identification. Here are the steps in detail:
Fault validation: This involves confirming the symptoms or problems reported by the patient or user. This can be done through physical examination, diagnostic tests, or other means. It is important to validate the fault to avoid misdiagnosis or incorrect treatment.
Information gathering: In this step, relevant information is collected to help in the diagnostic process. This can include the patient's medical history, symptoms, previous medical tests or treatments, or information about the system being diagnosed.
Information analysis: The information collected is then analyzed to identify possible causes of the problem. This involves looking for patterns, associations, or relationships between the symptoms and possible causes. Various diagnostic tools and techniques may be used, such as blood tests, imaging studies, or specialized software programs.
Solution identification: Based on the analysis, potential solutions or diagnoses are identified. This may involve ruling out certain possibilities, conducting further testing or consultations with other professionals, or making a definitive diagnosis.
In summary, the diagnostic process involves a logical and systematic approach that includes fault validation, information gathering, information analysis, and solution identification. This process is critical in identifying the underlying causes of problems or symptoms and developing appropriate treatments or solutions.
Smartphones evolved from basic cell phones and PDAs. True False
Answer:
True
Explanation:
USE SQL PROGRAMMING?
USE the YEAR FUNCTION
Which department received the most human resources complaints in 2020? USE the subproduct: hr subproduct. List the date the human resource complaint was submitted to the company. List the department name with the most human resources complaints in 2020 using the hr subproduct in the query?
SELECT department, date_submitted
FROM cοmplaints
WHERE subprοduct = 'hr subprοduct'
AND YEAR(date_submitted) = 2020
GROUP BY department
ORDER BY COUNT(*) DESC
LIMIT 1;
This query selects the department and date_submitted cοlumns frοm the cοmplaints table, filters fοr οnly cοmplaints with the 'hr subprοduct' subprοduct and submitted in 2020 using the WHERE clause and YEAR functiοn, grοups the results by department using GROUP BY, οrders the grοups by the cοunt οf cοmplaints in each department in descending οrder using ORDER BY COUNT(*) DESC, and returns οnly the first rοw (which will have the highest cοunt) using LIMIT 1.
To know more about SQL, visit:
brainly.com/question/30319386
#SPJ9
Consider this list of numbers: 3 4 6 7 8 9. Assuming a Linear search starts with 3, after four comparisons, which number will be checked next?
Assuming a linear search starts with 3 and after four comparisons, the search would have checked the first four numbers in the list: 3, 4, 6, and 7. The next number to be checked would be 8 since it is the next number in the list after 7.
How does linear search work?
Here are the general steps of how a linear search algorithm works:
1. Start with the first element in the list or array.
2. Compare the first element with the target element.
3. If the elements match, return the index of the current element and exit.
4. If the elements do not match, move to the next element in the list.
5. Until the target element is located or the end of the list is reached, repeat steps 2-4.
6. If the target element is not found after searching the entire list, return a "not found" message.
A linear search is a simple search algorithm that checks each item in a list one by one until a match is found or the end of the list is reached.
Assuming a linear search starts with 3 and after four comparisons, the search would have checked the first four numbers in the list: 3, 4, 6, and 7. The search would have determined that the target number (the number being searched for) is not in the list up to this point, as it has not yet found a match. the search would continue with the next number in the list, which is 8. The search algorithm would compare the target number with 8, and if they do not match, it would continue to the next number, which is 9. Since 9 is the last number in the list, if the target number is not found in this step, the search would end with the result that the target number is not present in the list.
Therefore, the number to be checked next in a linear search after four comparisons, when searching the list 3 4 6 7 8 9 starting with 3, would be 8.
To learn more about linear search click here
https://brainly.com/question/26533500
#SPJ1
Can anyone give me the answers to CMU CS Academy Unit 2.4? Any of the practice problems such as Puffer Fish or Alien Eye will do. I’ve already done drum set, animal tracks, and the spiderman mask one. Thanks!
Unfortunately, it is not possible to provide the answers to the practice problems for CMU CS Academy Unit 2.4 as these are meant to be solved by the students themselves.
What is CMU CS Academy?CMU CS Academy is an online, interactive, and self-paced computer science curriculum developed by Carnegie Mellon University (CMU). It is designed to give students the opportunity to learn computer science fundamentals in a fun and engaging way. With its interactive and self-paced structure, students can learn at their own pace and engage with the materials in an engaging, dynamic way. The curriculum covers topics such as problem solving, programming, algorithms, data structures, computer architecture, and more. With its intuitive and interactive design, students can learn and apply the concepts learned in a step-by-step manner. CMU CS Academy also provides tools and resources to help students on their learning journey, such as online quizzes, tutorials, and project-based learning.
To learn more about Carnegie Mellon University
https://brainly.com/question/15577152
#SPJ9
Using JUnit 4's Assert class , write tests for the class covering following cases, 1. the put method will do nothing when passed nll.is should also do nothing when passed any empty string. , 2. each individual item can only be taken from the shelf once , 3. duplicate items can exist on the shelf at the same time
The put function's behaviour when null is provided is tested by the test Put Method With Null() method. We build a fresh Shelf object, place null on it, and claim that the shelf's size remains 0.
Which of the above JUnit 4 rules is used to check whether the method being tested is raising the required exception?Assert Error Message for JUnit 4. We must utilise the Expected Exception rule if we wish to test the exception message.
What is Java's JUnit 4?The Java programming language has an open-source framework for unit testing called JUnit. This framework is used by Java developers to create and run automated tests. Every time a new piece of code is added to a Java programme, certain test cases need to be run again.
To know more about function's visit:-
https://brainly.com/question/28939774
#SPJ1
Consider the following Series object, s
Apple 10
Mango 20
Banana 30
Orange 40
i. Write the command which will display only apple.
ii. Write the command to increase price of all fruits by 10.
i. The command to display only apple would be:
s['Apple']
ii. The command to increase the price of all fruits by 10 would be:
s += 10
This will add 10 to each element of the Series object s. The resulting Series object would be:
Apple 20
Mango 30
Banana 40
Orange 50
The command to display only apple would be and The command to increase the price of all fruits by 10 would be.
What is Display command?Only shows the address space you are interested in. On a production system, this command is preferred over the first two because it does not produce such a long list.
Naturally, you must be aware of the name of the address space you are looking for. For all of the servants in a controller, you can display the status of each servant thread on which a request has been dispatched right now, or you can display this thread status for a specific servant in the controller.
Additionally, you can show details about the dispatch threads handling a specific request, the dispatch threads handling the same request for a predetermined period of time, or the dispatch threads handling timed-out requests.
Therefore, The command to display only apple would be and The command to increase the price of all fruits by 10 would be.
To learn more about Command, refer to the link:
https://brainly.com/question/14548568
#SPJ2
How ICT is important On entertainment
Answer:
Information and Communication Technology (ICT) has had a significant impact on the entertainment industry. ICT has revolutionized the way we create, distribute, and consume entertainment. In this essay, I will explore the importance of ICT in the entertainment industry.
Firstly, ICT has transformed the way entertainment is created. Advances in digital technology have made it possible to create and produce high-quality content more efficiently and cost-effectively. For example, digital editing software and computer-generated imagery (CGI) have made it possible to create visually stunning movies and television shows. Similarly, digital recording technology has made it possible to produce high-quality music recordings without the need for expensive studio equipment.
Secondly, ICT has revolutionized the distribution of entertainment. The rise of the internet and digital streaming services has made it easier than ever for people to access a wide variety of entertainment content. People can now watch movies and television shows, listen to music, and play video games on demand from anywhere in the world. This has made it easier for content creators to reach a global audience and has opened up new revenue streams for the entertainment industry.
Thirdly, ICT has transformed the way people consume entertainment. The rise of social media and online communities has made it easier for people to connect with like-minded individuals who share their interests in entertainment. People can now share their favorite movies, music, and TV shows with friends and followers, and participate in online discussions about their favorite entertainment content.
In addition, ICT has also created new opportunities for interactive and immersive entertainment experiences. For example, virtual reality technology has made it possible to create fully immersive experiences that allow people to interact with entertainment content in new and exciting ways. Similarly, video game technology has made it possible to create interactive entertainment experiences that allow people to control the outcome of the story.
In conclusion, ICT has had a significant impact on the entertainment industry. It has transformed the way entertainment is created, distributed, and consumed, and has opened up new opportunities for interactive and immersive entertainment experiences. As technology continues to advance, it is likely that we will see even more innovation in the entertainment industry, which will continue to shape the way we experience and enjoy entertainment.
In which situation does a linear search always perform better than a binary search?
Answer:
Linear search can be suitable for searching over an unsorted array. whereas, Elements in the array need to be in sorted order for binary search. The binary search algorithm uses the divide-and-conquer approach, it does not scan every element in the list. Hence, It is the best search algorithm
pls mrk me brainliest
create a program that prints the mirror image of an n-dimensional identity matrix (where n is input by the user). An identity matrix is defined as a square matrix with 1's running from the top left of the square to the bottom right. The rest are 0's. use python
We first ask the user to enter the identity matrix's size in this programme (n). Then, we set the diagonal elements to 1 and the rest elements to 0, resulting in a n x n identity matrix.
In Python, how do you solve a matrix?Use Python's numpy. linalg. solve() function to solve a linear matrix equation. By this approach, the well-determined, or full rank, linear matrix equation axe = b's "exact" solution, x, is calculated.
The identity matrix's size should be entered.
# Make an identity matrix of size n by n.
matrix = [[0 for x in range(n)] for y in range(n)]
for i in range(n):
matrix[i][i] = 1
# print the original matrix
print("Original matrix:")
for row in matrix:
print(row)
# create the mirror image of the matrix
mirror = []
for row in matrix:
mirror.append(row[::-1])
# Print the matrix's mirror image.
print("Mirror image of the matrix:")
for row in mirror:
print(row)
To know kore about programme visit:-
https://brainly.com/question/30307771
#SPJ1
What is data center? Why is it important?
Answer:
Explanation:
A data center is a facility that centralizes an organization's IT operations and equipment for the purposes of storing, processing and disseminating data and applications. Because they house an organization's most critical and proprietary assets, data centers are vital to the continuity of daily operations.
Describe the basic internal operation of magnetic hard disc
Explanation:
Magnetic hard disks (HDDs) are a type of storage device used in computers to store data persistently. Here are the basic internal operations of magnetic hard disks:
Platters: The hard disk consists of several circular disks called platters that are made of a rigid material like aluminum or glass. These platters are coated with a thin layer of magnetic material.
Read/Write Heads: Read/Write Heads are small electromagnets that are positioned above and below each platter. The heads move in unison and are attached to a mechanical arm called the actuator. The actuator positions the heads over the appropriate tracks on the platters.
Spindle Motor: The spindle motor rotates the platters at high speed, typically between 5400 and 15000 revolutions per minute (RPM). The faster the RPM, the faster the hard disk can read and write data.
Magnetic Fields: When data is written to the hard disk, the read/write heads create a magnetic field that aligns the magnetic particles on the platters in a specific pattern, representing the data being written.
Reading Data: When data is read from the hard disk, the read/write heads detect the magnetic pattern on the platters and convert it back into digital data. The read/write heads move rapidly over the platters, reading data from multiple tracks simultaneously.
File System: To organize and manage data on the hard disk, a file system is used. A file system keeps track of the location of data on the hard disk, as well as other information such as file names, permissions, and timestamps.
leave a comment
The Python math module contains several functions you can do, as described in the chapter. In this lab, you will ask the user for two integers, then find their greatest common divisor and print it out. The function in the math module that will find the greatest common divisor of two numbers is called gcd(a,b) where a and b are the two integers. After that, find the factorial of the greatest common divisor and print it. The factorial function in the math library is called factorial(x) where x is the number you want the factorial of. You may use any prompts you would like in order to input the numbers.
Answer:
Here's a Python code that asks the user for two integers, finds their greatest common divisor, calculates its factorial, and prints the result:
import math
# Prompt the user for two integers
a = int(input("Enter an integer: "))
b = int(input("Enter another integer: "))
# Find the greatest common divisor
gcd = math.gcd(a, b)
print("The greatest common divisor of", a, "and", b, "is", gcd)
# Calculate the factorial of the greatest common divisor
fact = math.factorial(gcd)
print("The factorial of", gcd, "is", fact)
Explanation:
This code first imports the math module which contains the functions we need. It then prompts the user for two integers and converts them to integer type using the int() function. Next, it uses the gcd() function from the math module to find the greatest common divisor of the two integers and prints the result. Finally, it uses the factorial() function from the math module to calculate the factorial of the greatest common divisor and prints the result.
Discuss the generation of computers in terms of □ the technology used by the (hardware and software) Computing characteristics (speed, i.e, number of instruction executed per second] Physical appeareance, and □ their applications.
Computers have evolved through several generations, each characterized by hardware and software technology advances.
Different computer generationsThe first generation (1940-1956) computers used vacuum tubes as the primary component and were the size of a room.
Second-generation computers (1956-1963) replaced vacuum tubes with transistors, reducing the size and cost while increasing speed.
Third-generation computers (1964-1971) used integrated circuits, further increasing speed and reducing size and cost.
Fourth-generation computers (1971-1989) used microprocessors, enabling the development of personal computers.
Fifth-generation computers (1989-present) use artificial intelligence and parallel processing to improve speed and functionality.
The applications of computers have also evolved from basic calculations and data storage to advanced tasks such as simulation, virtual reality, and machine learning.
Read more about computers here:
https://brainly.com/question/28498043
#SPJ1
What are the most famous modern communication terminals?
Answer: smartphones, tablets, and computers.
Explanation:
The most famous modern communication terminals are smartphones, tablets, and computers. Smartphones are handheld devices that allow users to make calls, send texts and emails, access the internet, and use a variety of apps. Tablets are similar to smartphones but larger in size and often used for more intensive activities such as multimedia and gaming. Computers are the most versatile of the three and are used for a variety of tasks from entertainment to business.
DRIVING QUEST UNIT 19: Question 6: Many alcohol-impaired individuals still believe they can drive due to.
-the natural ability of alcohol to boost confidence.
-the fact that alcohol changes perception and sharpens the motor skills.
-the fact that alcohol changes perception and allows to become uninhibited.
PLS HELP ME
Answer:
The correct answer is "the fact that alcohol changes perception and allows them to become uninhibited."
Explanation:
Many alcohol-impaired individuals still believe they can drive due to the fact that alcohol changes perception and allows them to become uninhibited. Therefore, option C is correct.
Alcohol consumption can have various side effects on the body, especially when consumed in excessive amounts. Some common side effects of alcohol include impaired judgment and decision-making, slowed reflexes and coordination, memory problems, digestive issues, liver damage, cardiovascular effects, weakened immune system, sleep disturbances, mood changes, and mental health issues.
Learn more about the effects of alcohol, here:
https://brainly.com/question/6133100
#SPJ6
Which of the following operating system is not likely to be running on a server
Answer:
iOS
Explanation:
Answer:
ios
Explanation:
Discuss about the advantage of GUI operating system (MS-Window) over Text based operating system (DOS).
Answer:
i dont have a plan of this app please help
Write your own function, named Quizzer, which when called will do the following:
Generate 2 random integers between 1-10 (inclusive)
Print the 2 numbers to the screen as a math problem, e.g. 2 * 10 = ?
Ask the user what the product (multiplication) of the 2 numbers is (e.g. the answer to the math problem)
Return True if the user's answer was correct, False otherwise.
Additionally, your solution should include a main program which, when your python file is run will call your Quizzer function (one time) and store the result from Quizzer in a new variable named success. If success is True after Quizzer is done running, print to the screen: "Good job!" Else, print to the screen the "Better luck next time."
Below is a possible implementation of the Quizzer function that meets the requirements you described:
python
import random
def Quizzer():
# Generate 2 random integers between 1-10 (inclusive)
num1 = random.randint(1, 10)
num2 = random.randint(1, 10)
# Print the 2 numbers to the screen as a math problem
print(f"{num1} * {num2} = ?")
# Ask the user what the product (multiplication) of the 2 numbers is
user_answer = int(input("Enter your answer: "))
# Check if the user's answer was correct
if user_answer == num1 * num2:
return True
else:
return False
# Call Quizzer function and store the result in a new variable named success
success = Quizzer()
# Check if success is True and print appropriate message to the screen
if success:
print("Good job!")
else:
print("Better luck next time.")
What is the function about?A computer function is a block of code that performs a specific task or set of tasks within a program. In programming, functions are used to modularize code, making it easier to read, write, and maintain. Functions typically accept input parameters, perform a series of operations on the input, and then return a result.
Functions in programming languages like JavaScript, Python, and Java are defined using a specific syntax. Here's an example of a simple function in JavaScript:
javascript
function addNumbers(num1, num2) {
return num1 + num2;
}
Read more about function here:
https://brainly.com/question/179886
#SPJ1