Answer:
The water is clearly close to boiling temperature when you add the ice. So, initially the ice cools the water that is near it to near 0degC. Water between about 0 and 8 degrees is more dense than hotter water, so the cold water sinks to the bottom.Jun 14, 2020
Hope this helps if so don't hesitate to 'Thanks' and/or 'brainliest' this answer!
Answer:
hot water has more melting point
Explanation:
hot water has more melting point
hot water cpyld be boiled
helpp!!
how much energy is required to heat up 100.0 grams of water from 0.000C to 60.00C?
Answer:
25,104
Explanation:
100.0 x 4.184 x 60.0 = 25,104
Energy required to heat up 100 grams of water(4.184J/g°C) from 0.000C to 60.00C is 25,104.
What is Thermodynamics?The science of thermodynamics examines the connections between heat, work, temperature, and energy. The rules of thermodynamics explain how energy moves inside a system and whether or not the system is capable of performing beneficial work on its surroundings. The heat needed to increase one gram of a substance's temperature by one degree Celsius is known as specific heat capacity.
Here,
The specific heat capacity of water is 4.184 J/g° C
This is the heat required to increase the temperature by 1°C.
same way, 4.186J is heat required to raise the temp of 1 gram of water.
Derived equation is: q = mcΔT
Where,
q is heat required
c is specific heat capacity of the substance
m is mass of the substance and
ΔT is the change in temperature
Given,
m = 100g
ΔT = 60.00C - 0.00C
ΔT = 60°C
c = 4.184 J/g°C
now, substitute the values:
q = mcΔT
q = 100 × 60 × 4.184
∵ q = 25,104
To know more about Thermodynamics, visit:
https://brainly.com/question/3808473
#SPJ2
8. If a chemical reaction such as photosynthesis begins with 6 atoms of carbon (C), how many atoms of carbon (C) should be in the products? A. 12 atoms of carbon (C) B. 6 atoms of carbon (C) c. 3 atoms of carbon (C) D. 2 atoms of carbon (C)
A. 12 atoms of carbon (C)
B. 6 atoms of carbon (C)
C. 3 atoms of carbon (C)
D. 2 atoms of carbon (C)
Answer
b
Explanation:
31. Solve this Gibbs' Free Energy Equation:
For a reaction at 200 K, the Delta H has a value of 250 kJ and the Delta S has a value of 0.100 kJ. 1s
the reaction spontaneous or not spontaneous?
Answer:The standard Gibbs energy change at 300K for the reaction 2A⇔B+C is 2494.
Explanation:
ΔG = free energy at any moment.
ΔGo = standard-state free energy.
R is the ideal gas constant = 8.314 J/mol-K.
T is the absolute temperature (Kelvin)
lnQ is natural logarithm of the reaction quotient
Pls 50 points right answer gets brainliest
Explain the meaning of thermal energy transfer and give specific examples of conduction, convection, and radiation.
Answer:
thermal energy: the part of total internal energy that can be transferred (a portion of the kinetic energy)
heat is the thermal energy that flows from one substance to another due to a temperature difference.
Thermal energy is measured in temperature change.
Thermal energy transfer stops when thermal equilibrium is achieved (Both substances at the same temperature).
conduction: Transfer of thermal energy through a solid object like heat transferring up a metal spoon from a hot cup of coffee.
convection: the transfer of thermal energy due to the movement of a liquid or gas caused by differences in temperature. Only in a fluid (liquid or gas). Breezes, ocean currents.
radiation: Transfer energy with or without matter. Warming from the Sun, microwave oven.
Answer:
Conduction is the transfer of thermal energy through direct contact. Convection is the transfer of thermal energy through the movement of a liquid or gas. Radiation is the transfer of thermal energy through thermal emission. Hope this helps!
Explanation:
Antacid has a pH of 11. What does that tell you about its concentration of hydrogen ions? What does that tell you about its concentration of hydroxide ions?
Answer: The concentration of hydrogen ions is [tex]10^{-11}M[/tex] and the concentration of hydroxide ions is [tex]10^{-3}M[/tex]. Thus the concentration of hydroxide ions is more than the concentration of hydrogen ions.
Explanation:
pH or pOH is the measure of acidity or alkalinity of a solution.
pH is calculated by taking negative logarithm of hydrogen ion concentration.
[tex]pH=-\log [H^+][/tex]
[tex]pOH=-\log[OH^-][/tex]
Putting in the values:
[tex]11=-\log[H^+][/tex]
[tex][H^+]=10^{-11}M[/tex]
[tex]pH+pOH=14[/tex]
[tex]pOH=14-11=3[/tex]
[tex]3=-log[OH^-][/tex]
[tex][OH^-]=10^{-3}M[/tex]
Thus the concentration of hydroxide ions is more than the concentration of hydrogen ions.
Draw the correct Lewis structure of this molecule by placing atoms on the canvas and connecting them with bonds. Include all hydrogen atoms and lone pairs of electrons.
Answer:
hello your question is incomplete attached below is the complete question
answer : attached below
Explanation:
The Lewis structure given in the question is incorrect attached below is the correct Lewis structure.
Lewis structure of a molecule is the representation of the valence electrons in a molecule
The data shows the number of humans and western pond turtles in a particular county.
800
700
600
500
400
300
200
100
1987
1990
07
1960 1970
1980
number of western pond turtles
human population (in thousands)
What can be inferred about the turtle population?
The turtle population decreases as a result of less livable space.
O The turtle population moves to a new county due to a fear of humans.
The turtle population decreases as a result of natural disasters.
The turtle population moves to a new county due to a change in the climate.
An unknown concentration of sodium thiosulfate, Na2S2O3, is used to titrate a standardized solution of KIO3 with excess KI present. Suppose 15.55 mL of the Na2S2O3 solution is required to titrate the iodine formed from 21.45 mL of 0.0135 M KIO3. What is the molarity of the Na2S2O3 solution?
Answer:
0.112M is molarity of the Na₂S₂O₃ solution
Explanation:
First, the KIO₃ reacts with KI as follows:
KIO3 (aq) + 5 KI (aq) + 6 HCl (aq) → 3 I2 (s) + 6 KCl (aq) + 3 H2O (l)
Then, the I₂ produced reacts with the Na₂S₂O₃ as follows:
2 Na2S2O3 + I2 → Na2S4O6 + 2 NaI
Thus, to solve this question, we need to obtain the moles of KIO₃ that react, then, the moles of I₂ produced -Using the chemical reaction- to find the initial moles of Na₂S₂O₃. With these moles and the volume we can find molarity of the solution:
Moles KIO₃:
21.45mL = 0.02145L * (0.0135mol/L) = 2.896x10⁻⁴ moles KIO₃
Moles I₂:
2.896x10⁻⁴ moles KIO₃ * (3mol I₂ / 1mol KIO₃) = 8.687x10⁻⁴ moles I₂
Moles Na₂S₂O₃:
8.687x10⁻⁴ moles I₂ * (2mol Na₂S₂O₃ / 1mol I₂) = 1.737x10⁻³ moles Na₂S₂O₃
As the volume of the titrated solution is 15.55mL, molarity is:
1.737x10⁻³ moles Na₂S₂O₃ / 0.01555L =
0.112M is molarity of the Na₂S₂O₃ solutionHow many grams of ammonia would be produced from the reaction of 2.64 moles of hydrogen gas reacting with excess nitrogen?
Answer:
29.92g
Explanation:
tell me if my answer is wrong
I am so lost. Does anyone know how to do this??? Enthalpies of reaction stuff
C2H4(g)+3O2(g)→2CO2(g)+2H2O(l) ΔH∘1=?
The combustion of C2H4(g) is represented by the equation above.
(a) Use the enthalpies of formation in the table below to calculate the value of ΔH∘1 for the reaction.
ΔH∘f(kJ/mol)
C2H4(g) 52
CO2(g) −394
H2O(l) −286
O2(g) 0
Please help!!! :(
Answer:
-1464 kJ/mol
Explanation:
The balanced equation for the reaction is given as;
C2H4(g)+3O2(g)→2CO2(g)+2H2O(l) ΔH∘1=?
The enthalpy of the reaction is given by the equation;
Enthalpy of reaction = Enthalpy of products - Enthalpy of reactants
Products:
2CO2(g)+2H2O(l)
Enthalpy of Products = 2 (−394) + 2(−286)
Enthalpy of Products = -1360 kJ/mol
Reactants:
C2H4(g)+3O2(g)
Enthalpy of Reactants = 2 (52) + 3(0)
Enthalpy of Reactants = 104 kJ/mol
Enthalpy of Reaction = -1360 - 104 = -1464 kJ/mol
A 6.0-V battery does 1200 J of work transferring charge. How much charge is transferred?
answer is below!! hope this helped
A 6.0-V battery does 1200 J of work transferring charge, then 100C charge is transferred.
What is battery ?One or more electrochemical cells with external connections for powering electrical equipment make up an electric battery, which is a source of electric power.
A battery's positive terminal serves as the cathode and its negative terminal serves as the anode when it is delivering electricity.
Electricity is accepted, stored, and released on demand by batteries and similar devices. Like many other common energy sources, batteries store energy through chemistry in the form of chemical potential.
For instance, until they are burned, logs store energy in their chemical bonds for later conversion to heat.
V = 12 V
W = 1200 J
q = ?
V = W / q
12 = 1200 / q
q = 100 C
Thus, A 6.0-V battery does 1200 J of work transferring charge, then 100C charge is transferred.
To learn more about battery follow the link;
https://brainly.com/question/19225854
#SPJ2
Renewable energy resources include *
O all of the above
O moving water
O biomass
O wind
A(n)____ is a ripened ovary
Directions: Show all of your work for each of the following problems.
3. What is the % Ba in Ba(NO3)2?
4. What is the % of each element in Ni3(PO4)2?
5. What is the % of each element in Al2(CrO4)3?
6. What is the % of each element in (NH4)2(SO4)?
Answer:
3.Ba=24.Ni=2...PO4=35.Al=3...CrO4=26.NH4=1...SO4=2Which of the nine substances are made of four elements?
Answer:
Oxygen mucury carbon dioxide and platinum
Explanation:
How does moving water help shape earth?
Answer:
Moving water helps plant's and islands form and grow. Which shapes earth.
What volume of Nitrogen measured at s.T.P. Will be produced on heating 33.8g of calcium trioxonitrate
Answer:
9.2288 L
Explanation:
The equation of the reaction is given as;
2 Ca(NO3)2 → 2 CaO + 4 NO2 + O2
From the reaction;
2 mol of Ca(NO3)2 produces 4 mol of NO2
Converting 33.8g to Number of moles;
Number of moles = Mass / Molar mass
Number of moles = 33.8 g / 164.088 g/mol
Number of moles = 0.206 mol
2 = 4
0.206 = x
Solving for x;
x = 0.206 * 4 / 2
x = 0.412 mol
At STP;
1 mol = 22.4 L
0.412 mol = x
Solving for x;
x = 0.412 * 22.4 = 9.2288 L
why is chemistry a science
Answer:
Explanation:
Chemistry is often referred to as the central science because it joins together physics and mathematics, biology and medicine, and the earth and environmental sciences. Knowledge of the nature of chemicals and chemical processes therefore provides insights into a variety of physical and biological phenomena.
Answer:
Science chemistry is the investigation of issue, examining its design, properties and conduct to see what happens when they change in substance responses. Thusly, it very well may be viewed as a part of actual science, close by stargazing, physical science and studies of the planet including geography.
Explanation:
.Science chemistry is fundamental for meeting our essential requirements of food, clothing, cover, wellbeing, energy, and clean air, water, and soil. Substance advances improve our personal satisfaction in various ways by giving new answers for issues in wellbeing, materials, and energy use.
Here are the absolute best motivations to concentrate on science.
,Science assists you with figuring out your general surroundings. ...
,,Essential information on science assists you with perusing and
comprehend item marks.
,,,Science can assist you with pursuing informed choices. ...
,,Science is at the core of cooking. ...
,,,An order of science can assist with guarding you
Adolescents should be careful about what they eat beacause
Answer:
it can affect your growth, like it can stunt your growth and could get health problems. pls make me brainiest.
What phase is not part of mitosis and is where the cells spends most of its time
Answer:
interphase
Explanation:
they spend most time in interphase
ill give brainlist pls help me and don't guess I want full explanation please.
Answer:
C. 3
Explanation:
volume = length×width×height
3×3×3=27
How many grams of water should be added to 4.00 g NaOH to create 2.00% by mass NaOH solution?
Answer:
196 grams
because ^^^ was wrong and person in comments said it was 196 and it was right
When NaOH of 4.00 g is being added with water, the mass of water required to create 2.00% of NaOH solution by mass is 196 g.
What is mass percent of solute?It means that the particular amount of solute in terms of percentage is present in the solute.
Given the mass of the solute, NaOH is 4.00g
Suppose the mass of water required to add is x in g.
The mass percent of the solute is
[tex]\dfrac{2}{100} =\dfrac{4.00}{4.00 +x }[/tex]
x =196 g
Therefore, mass of water required to create 2.00% of NaOH solution by mass is 196 g.
Learn more about Mass percent of solute.
https://brainly.com/question/15136748
#SPJ2
The change in water from the solid ice to a liquid is an example of a
Answer:
When solid ice gains heat, it changes state from solid ice to liquid water in a process called melting. Ice cubes in a cold drink, for example, gradually melt. This process is called evaporation. Water vapor (steam) mixes with the air and seems to disappear.
Answer:
melting
when solid ice gains heat, it changes state from solid ice to liquid water in a process called melting
this is correct answer
I hope it's helpful for u ...
A population of mice, some with light-colored fur and some with dark-colored fur are introduced into a field with dark soil. A few generations later, the majority of the mice have dark-colored fur. Which of the following best explains this change? *
Light-colored mice can run faster.
Dark-colored mice have fewer offspring.
Light-colored mice have changed color over generations.
Dark-colored mice are better able to hide from their predators.
Answer:
Dark-colored mice are better able to hide from predators.
Explanation:
If all of the light mice are eaten, then there are none left to pass on the light-furred gene, meaning that there would be no offspring without dark fur.
The correct option for the given question about Evolution is Option D) "Dark coloured mice are better able to hide from their predators".
What is the Theory of Darwin?
"Survival of the fittest" is explained in the Darwin theory.
It is identical to natural selection. You are regarded as one of the "fittest" if you possess the greatest features or are "fit" enough to live and adapt to your surroundings. However, the ability to reproduce is just as important as simply surviving. You are successful if you can survive and reproduce.
Thus we can conclude that Dark coloured mice are better able to hide from their predators and hence they also satisfies the theory of Darwin "The survival of the fittest" hence this is the reason why after few generation the majority of the mice have dark coloured fur.
Learn more about Evolution here:
https://brainly.com/question/1144962
#SPJ2
Organisms are classified into different kingdoms based on?...
Answer:
Food and cell type
Explanation:
Kingdoms are by far the most basic legal structure for living objects. Living objects are classified into realms depending on how they consume food, the kinds of cells that produce their bodies, and the total type of tissue in their bodies.
what's the advantage and disadvantage of using a stopwatch, clamp, thermometer, butanol, methanol, ethanol, propanol and other equipment from the lab
please help me
what is the grams of molar mass of magnesium
Answer:
4.0359398 × 10^-23 g
Explanation:
All explanations or thoughts led to that answer
In ADEF, the measure of F=90°, the measure of ZD=10, and EF = 94 feet. Find the
length of DE to the nearest tenth of a foot.
Answer:
answer. the measure. is f=90 the equbaliint is 180
Explanation:
yan ang sagot ko
Ba(NO3)2 + 2LiOH → Ba(OH)2 + 2LiNO3
How many nitrate ions are in the products and the reactants of the chemical equation?
A.
one in the reactants and two in the products
B.
three in the reactants and three in the products
C.
two in the reactants and two in the products
D.
six in the reactants and three in the products
Answer:
C.
two in the reactants and two in the products
Explanation:
The law of conservation of mass helps us balance chemical equations so that there are the same number and type of atoms in the reactants and products.
There are two nitrate ions in Ba(NO3)2 and two in 2LiNO3.
Given the following balanced equation:
2KCIO3 --> 2KCI + 302
How many grams of potassium chloride are produced when 45.Og of potassium
chlorate are decomposed?
0 27.4
0.04
0 2.74
O 0.4
Answer:
0.04
Explanation: