F.5 Compare physical and chemical changes PPU
What do these two changes have in common
a crayon melting in the sun
beating an egg

Answer: Disposal of the waste products

No matter how uranium is extracted from rock, the procedure produces radioactive wastes. Mining waste and mill tailings can damage the environment if they are not managed appropriately.

Explanation:

The [tex]BrO_3^-[/tex] ion is named bromate, which is an anion derived from the oxoacid [tex]HBrO_3[/tex]. The name of the oxoacid [tex]HBrO_3[/tex] is bromic acid.

Here's the breakdown of the terms:
- Ion: An atom or molecule with a net electric charge due to the loss or gain of one or more electrons.
- Bromate: The [tex]BrO_3^-[/tex] ion, an anion containing bromine and oxygen.
- Oxoacid: An acid containing oxygen, along with another element and hydrogen.

The hydrogen atom is bonded to one of the oxygen atoms via a single covalent bond. This makes the bromic acid a member of the oxoacid family, which consists of acids that contain oxygen and hydrogen atoms.
So,[tex]HBrO_3[/tex] is an oxoacid with the bromate ion ([tex]BrO_3^-[/tex]) and hydrogen (H⁺), and its name is bromic acid.

To learn more about bromate click here https://brainly.com/question/19094335

#SPJ11

The stoichiometric concept is used here to determine the moles of Aluminium used. Stoichiometry is an important concept in chemistry which helps us to use balanced chemical equation to calculate the amount of reactants and products.

Chemical stoichiometry refers to the quantitative study of the reactants and products involved in a chemical reaction. It help us to determine how much substance is needed or is present.

The balanced equation is:

4Al  +  3O₂     →     2Al₂O₃

1.35 mol O₂ × 4 mol Al / 3 mol O₂ = 1.8 mol Al

To know more about stoichiometry, visit;

brainly.com/question/19642113

#SPJ1

One calcium ion [tex](Ca2^+)[/tex]and two bromide ions[tex](Br^-)[/tex]are produced when [tex]CaBr^2[/tex] (calcium bromide) dissolves in water.

The ionic compound calcium bromide [tex](CaBr^2)[/tex] is made up of calcium cations [tex](Ca2^+)[/tex]and bromide anions [tex](Br^-)[/tex]in a 1:2 ratio. It is a crystalline white substance that is very soluble in both alcohol and water.

Therefore, One [tex]Ca2^+[/tex] ion and two Br- ions are produced by each formula unit of[tex]CaBr^2[/tex] in solution. This is due to the fact that the ionic compound [tex]CaBr^2[/tex] dissociates in water, causing the compound to separate into its individual ions, which are then solvated by water molecules.

Learn more about calcium bromide here : brainly.com/question/30581878

#SPJ1

The crystal planes that are most suitable for cleaving a diamond are octahedral planes. Diamonds are composed of a crystalline structure of carbon atoms that are arranged in a specific way.

This arrangement results in a cubic crystal lattice structure with eight triangular faces or octahedral planes.
When a diamond is cut, it needs to be cleaved along a specific plane to ensure that it retains its shape and sparkle. Cleaving is the process of breaking a diamond along a specific plane, and it is done using a special cutting tool.
The octahedral planes are the most suitable for cleaving diamonds because they have the weakest bonding between their atoms. This makes it easier to break the diamond along this plane without causing damage to the rest of the stone.
Cleaving a diamond is a delicate process that requires skill and expertise. A skilled diamond cutter knows how to identify the optimal octahedral plane to cleave a diamond and then carefully executes the cut. This process ensures that the diamond retains its beauty and value.
In conclusion, the octahedral planes are the most suitable for cleaving a diamond. This process is essential in the diamond cutting and polishing industry and requires precision and expertise to execute correctly.

To learn more about diamond, refer:-

https://brainly.com/question/9286031

#SPJ11

Answer:

I have written the answer below:

Explanation:

a. row 1- Mass of O2: 48g

b. row 2- Mass of O2: 192g

c. row 2- mass of Al2O3: 240g

d. row 3- Mass of Al: 270g

e. row 3- Mass of Al2O3: 510g

f. row 4- Mass of Al: 162g

g. row 4- Mass of O2: 144g

The pH of a solution is related to the concentration of H+ ions in the solution by the following equation:

pH = -log[H+]

where [H+] is the concentration of H+ ions in moles per liter (M).

For the acid H2SO4, the dissociation can be written as follows:

H2SO4 ⇌ H+ + HSO4-

The acid dissociation constant, Ka, is defined as:

Ka = [H+][HSO4-]/[H2SO4]

Rearranging this equation gives:

[H+][HSO4-] = Ka[H2SO4]

Since the solution contains HSO4- ions, we can assume that all of the H2SO4 has dissociated, and therefore [H2SO4] = 0.15 M. We can also calculate the concentration of H+ ions using the pH:

pH = -log[H+]

10^(-pH) = [H+]

10^(-1.43) = [H+]

[H+] = 3.56 × 10^(-2) M

Substituting these values into the equation for Ka gives:

(3.56 × 10^(-2))(x) = Ka(0.15)

where x is the concentration of HSO4- ions. Solving for Ka:

Ka = (3.56 × 10^(-2))(0.15)/x

Ka = 5.34 × 10^(-3)/x

Therefore, the value of Ka depends on the concentration of HSO4- ions, which was not given in the problem. Without additional information, we cannot calculate the value of Ka.

The repeating head-to-tail monomer arrangement is the most common for PVC (polyvinyl chloride), PP (polypropylene), and PS (polystyrene). This arrangement provides more ordered regions in the polymer,

By "head to tail" linking monomer units, condensation polymers are created. The loss of a tiny molecule, such water (H20), occurs at each join (link). For the reaction to occur, each monomer must have two reactive functional groups.

A thermoplastic polymer utilised in many different applications is polypropylene (PP), also known as polypropene. Propylene, a monomer, is used to create it by chain-growth polymerization.

To know more about monomer visit:-

https://brainly.com/question/18784783

#SPJ11

The balanced chemical equation for the reaction of benzoic acid (C6H5COOH) with NaOH is: C6H5COOH + NaOH → C6H5COONa + H2O.

In this reaction, the NaOH reacts with the carboxylic acid (benzoic acid) to form the corresponding salt (sodium benzoate) and water.
The balanced chemical equation for the reaction of benzoic acid with NaOH.
The balanced chemical equation for the reaction of benzoic acid (a carboxylic acid) with sodium hydroxide (NaOH) is:
C6H5COOH + NaOH → C6H5COONa + H2O
Here's a step-by-step explanation:
1. Benzoic acid (C6H5COOH) reacts with sodium hydroxide (NaOH).
2. The carboxylic acid group (COOH) of benzoic acid loses a hydrogen ion (H+) to form the carboxylate ion (C6H5COO-).
3. The sodium ion (Na+) from NaOH binds with the carboxylate ion (C6H5COO-) to form sodium benzoate (C6H5COONa).
4. The hydrogen ion (H+) from benzoic acid and the hydroxide ion (OH-) from NaOH combine to form water (H2O).

Visit here to learn more about benzoic acid:

brainly.com/question/24052816

#SPJ11

The theoretical yield of Cu(s) is 2.291 grams.

To determine the theoretical yield of Cu(s), we need to find the limiting reagent and use it to calculate the maximum amount of Cu(s) that can be produced.

The reactions in the lab manual are not provided, so we will assume that the experiment involves reducing Cu²⁺ to Cu(s) using a reducing agent such as Zn(s) or Al(s):

Cu²⁺(aq) + Zn(s) → Cu(s) + Zn²⁺(aq)

Based on this reaction, the balanced equation is:

CuCl₂(aq) + Zn(s) → Cu(s) + ZnCl₂(aq)

The stoichiometry of the reaction tells us that 1 mole of CuCl₂ reacts with 1 mole of Zn to produce 1 mole of Cu. Therefore, the moles of Cu produced will be equal to the moles of Zn used in the reaction.

We can calculate the moles of Zn needed to react with all of the CuCl₂ using the initial amount of CuCl₂:

moles of CuCl₂ = 0.0360 mol

moles of Zn needed = 0.0360 mol

Now we can calculate the theoretical yield of Cu:

moles of Cu = moles of Zn = 0.0360 mol

mass of Cu = moles of Cu x molar mass of Cu

= 0.0360 mol x 63.546 g/mol

= 2.291 g

Therefore, by calculating we can say that the theoretical yield of Cu(s) is 2.291 grams.

To know more about theoretical yield the refer here :

https://brainly.com/question/14966377#

#SPJ11

The correct answer is A) cations are positively charged ions. This is because cations have lost electrons, leaving them with a net positive charge.

It is important to note that protons are positively charged particles found in the nucleus of an atom and play a key role in determining the charge of an ion. So in the case of cations, they have fewer electrons than protons, which results in a positive charge.

Option B is incorrect as cations actually have fewer electrons than protons, not more. Option C is incorrect as neutrons do not affect the charge of an ion. Option D is also incorrect as negatively charged ions are called anions, not cations.
 A) are positively charged ions.

To know more about ions click here .

brainly.com/question/14982375

#SPJ11

82.67 grams of MgCl₂ are produced when 50.6 grams of Mg(OH)₂ and 45.0 grams of HCl are reacted.

The balanced chemical equation for the reaction between magnesium hydroxide and hydrochloric acid is:

Mg(OH)₂ + 2HCl → MgCl₂ + 2H₂O

To find the mass of MgCl₂ produced, we need to determine which reactant is limiting. This can be done by calculating the number of moles of each reactant and comparing them to the stoichiometric ratio in the balanced equation.

Number of moles of Mg(OH)₂ = 50.6 g / 58.32 g/mol = 0.868 mol

Number of moles of HCl = 45.0 g / 36.46 g/mol = 1.235 mol

According to the balanced equation, 1 mole of Mg(OH)₂  reacts with 2 moles of HCl. Therefore, Mg(OH)₂  is the limiting reactant, since only 0.868 moles of Mg(OH)₂ are available to react with HCl.

From the balanced equation, we know that 1 mole of Mg(OH)₂ produces 1 mole of MgCl₂. Therefore, the number of moles of MgCl₂ produced is also 0.868 moles.

The molar mass of MgCl₂ is 95.21 g/mol. Therefore, the mass of MgCl₂ produced is:

Mass of MgCl₂ = 0.868 mol x 95.21 g/mol = 82.67 g

Therefore, approximately 82.67 grams of MgCl₂ are produced when 50.6 grams of Mg(OH)₂ and 45.0 grams of HCl are reacted.

Learn more about magnesium hydroxide

https://brainly.com/question/21904397

#SPJ4

The rate of the forward reaction equals the rate of the reverse reaction is the correct statement when a system is at equilibrium. Therefore, option A is correct.

When a system is at equilibrium, it means that the forward and reverse reactions are occurring at equal rates.

The rate at which reactants are being converted into products in the forward reaction is the same as the rate at which products are being converted back into reactants in the reverse reaction.

At equilibrium, the concentrations of reactants and products may not be equal, but the ratio of their concentrations remains constant. This is known as the equilibrium constant (K) and is determined by the stoichiometry of the balanced chemical equation.

To learn more about the equilibrium, follow the link:

https://brainly.com/question/30694482

#SPJ12

The given statements I (For a strong acid-strong base titration, the pH at the equivalence point is equal to 7) and II (For a weak acid-strong base titration, the pH at the equivalence point is greater than 7) are true, while statement III (dding a common-ion to the solution will increase the solubility of the insoluble salt) is false.

In a strong acid-strong base titration, statement I is true. When a strong acid reacts with a strong base, the products are a salt and water, leading to a neutral solution with a pH of 7 at the equivalence point. This occurs because the strong acid and strong base completely dissociate, and their respective ions combine to form water.

Statement II is also true. In a weak acid-strong base titration, the pH at the equivalence point is greater than 7. This is because a weak acid does not completely dissociate in water, leaving a significant amount of conjugate base in the solution when it reacts with the strong base. The conjugate base from the weak acid can accept a proton from water, resulting in an increase in hydroxide ions (OH-) and a pH above 7 at the equivalence point.

However, statement III is false. Adding a common-ion to a solution containing an insoluble salt will decrease the solubility of the salt, not increase it. This occurs due to the common-ion effect, which states that the presence of a common ion suppresses the ionization of a weak electrolyte, causing the equilibrium to shift towards the formation of the insoluble salt and leading to a decrease in solubility.

To know more about titration, refer to the link below:

https://brainly.com/question/31229711#

#SPJ11

The bond that is most polar among the given options is C) H-F. The other options have relatively smaller electronegativity differences between the two atoms, resulting in weaker polar bonds.

For more such question on polar bond

https://brainly.com/question/29144393

#SPJ11

The correct option is A, The correct electron-dot formulas are B · (· ·).

Electron-dot notation, also known as Lewis dot notation or Lewis structures, is a way of representing the valence electrons of an atom using dots. In this notation, each dot represents one valence electron, which are the electrons in the outermost energy level of an atom that participate in chemical bonding.

To write the electron-dot notation of an atom, you start by writing the symbol of the element and then placing dots around it to represent the valence electrons. The dots are placed singly and paired up to represent the two electrons that can occupy each orbital. Electron-dot notation is useful for predicting the types of chemical bonds that can form between atoms.

To learn more about Electron-dot visit here:

brainly.com/question/2115636

#SPJ4

Complete Question:

Select the correct electron-dot formulas. You can refer to the periodic table if necessary. Check all that apply.

A). B

B). Ca

C). Na

D). CF

E). Ne

The Ka of chloroacetic acid is equal to 2.1 x 10⁻². The Ka for chloroacetic acid can be determined from the measured pH of a 0.11 M solution of chloroacetic acid.

To determine the value of Ka for chloroacetic acid (CH2ClCOOH), we can use the pH of the solution and the initial concentration of the acid. The equation for the dissociation of chloroacetic acid is:

CH2ClCOOH(aq) + H₂O(l) ⇌ CH2ClCOO-(aq) + H₃O+(aq)

At equilibrium, we can assume that x is the concentration of the hydronium ion (H₃O+) and the acetate ion (CH2ClCOO-), which will be equal since the acid is monoprotic. Therefore, the concentration of CH2ClCOO- will also be x. The initial concentration of CH2ClCOOH is 0.11 M.

The equilibrium expression for Ka is given by:

Ka = [CH2ClCOO-][H₃O+]/[CH2ClCOOH]

Substituting the equilibrium concentrations, we have:

Ka = (x)(x)/(0.11 - x)

Given that the pH of the solution is 1.91, we can calculate the concentration of H₃O+ using the relationship:

pH = -log[H₃O+]

1.91 = -log[H₃O+]

[H₃O+] = 10^(-pH)

[H₃O+] = 10^(-1.91)

[H³O+] ≈ 7.94 × 10⁻² M

Since the concentration of H3O+ is equal to x, we can substitute this value into the equilibrium expression:

Ka = (7.94 × 10⁻²)(7.94 × 10⁻²)/(0.11 - 7.94 × 10⁻²)

The Ka of chloroacetic acid is equal to 2.1 x 10⁻².

Know more about chloroacetic acid here

https://brainly.com/question/15049102#

#SPJ11

The volume of water in equilibrium with solid HgS containing a single Hg²+ ions is 1.105 ×[tex]10^(-24)[/tex].

The solubility product expression for HgS can be written as:

[tex]\mathrm{K_{sp} = [Hg^{2+}][S^{2-}]}[/tex]

Since HgS is a sparingly soluble salt, we can assume that the concentration of Hg²+ ionss in the solution is negligible compared to the initial concentration of HgS. Therefore, we can write:

[Hg²] ≈ 0

Substituting this into the solubility product expression, we get:

[tex]\mathrm{[Hg^{2+}] \approx 0}[/tex] [tex]\mathrm{K_{sp} = [Hg^{2+}][S^{2-}] \approx 0 \times [S^{2-}] = 0}[/tex]

This implies that the concentration of S2- ions in solution is also very low, and thus, the solubility of HgS is also very low. We can calculate the solubility (S) of HgS in water as follows:

[tex]\mathrm{K_{sp} = [Hg^{2+}][S^{2-}] = S^2}[/tex]

[tex]\mathrm{S = \sqrt{K_{sp}} = \sqrt{3.0 \times 10^{-53}} = 5.5 \times 10^{-27}\ M}[/tex]

To convert this to miles per liter, we can use the conversion factor:

1 mile = 1.60934 km

1 liter = 1000 [tex]cm^3[/tex]

1 cm = [tex]10^(-2) m[/tex]

1 mile per liter = [tex](1/1.60934)^3[/tex]km per liter = [tex]0.160934^3[/tex] km per liter = 0.00417 km per liter

Therefore, the solubility of HgS in water is:

S = 5.5 × [tex]10^(-27)[/tex] M = 5.5 × 10^(-27) mol/L

= 5.5 × [tex]10^(-27)[/tex] × 200.59 g/mole (molar mass of HgS)

= 1.102 × [tex]10^(-24)[/tex] g/L

= 1.102 × [tex]10^(-24)[/tex] / 1.66054 × 10^(-24) miles per liter

= 0.663 miles per liter (approximately)

To calculate the volume of water in equilibrium with solid HgS containing a single Hg²+ ions, we can use the solubility and the stoichiometry of the reaction:

[tex]\mathrm{HgS(s) \rightleftharpoons Hg^{2+}(aq) + S^{2-}(aq)}[/tex]

For every HgS molecule that dissolves, oneHg²+ ions is released. Therefore, the concentration of Hg²+ ions in solution is equal to the solubility of HgS.

The volume of water required to dissolve one HgS molecule and release a single Hg2+ ion can be calculated as follows:

1 molecule of HgS = 200.59 g/mole

1 mole of HgS = (1/200.59) mole/g = 4.987 × [tex]10^(-3)[/tex] mole

1 L of solution = 1000 [tex]cm^3[/tex]

[tex]1 cm^3[/tex]of solution = 1/1000 L

5.5 ×[tex]10^(-27)[/tex] mol/L = 5.5 ×[tex]10^(-27)[/tex] mol/cm^3

Volume of water containing a single Hg²+ ions = (5.5 × [tex]10^(-27)[/tex] [tex]mol/cm^3)[/tex] / (4.987 ×[tex]10^(-3)[/tex] mol/L) × (1/1000) L/[tex]cm^3[/tex]

= 1.105 × [tex]10^(-24) L[/tex]

Therefore, the volume of water in equilibrium with solid HgS containing a single Hg2+ ion is 1.105 × [tex]10^(-24) .[/tex]

Learn more about volume of water

https://brainly.com/question/17322215

#SPJ4

The temperature in Celsius of 308 K is 35°C. Option A is correct.

Temperature in Celsius (°C) is a unit of measurement used to express the amount of thermal energy or heat present in a substance or environment, relative to the freezing and boiling points of water.

In the Celsius scale, the freezing point of water is defined as 0°C, and the boiling point of water is defined as 100°C, at standard atmospheric pressure.

To convert temperature from Kelvin (K) to Celsius (°C), you subtract 273.15 from the given temperature in Kelvin.

308 K - 273.15 = 34.85°C (rounded to two decimal places)

Since the temperature 308 K is slightly less than 35°C.

Hence, A. is the correct option.

To know more about freezing point here

https://brainly.com/question/3121416

#SPJ1

Lithium acetylide is an organic compound that is commonly used as a strong base in organic synthesis. It is prepared by the reaction of acetylene with lithium metal in an inert atmosphere. The reaction is exothermic and requires careful handling.

A specific example of the preparation of lithium acetylide can be illustrated by the reaction between acetylene and lithium in a dry tetrahydrofuran (THF) solvent. The reaction can be written as follows:

C₂H₂ + 2Li → Li₂C₂ + H₂

In this reaction, acetylene acts as the reactant, while lithium metal acts as the reagent. The product of the reaction is lithium acetylide, which is represented by the chemical formula Li₂C₂.

The reaction is usually carried out in an inert atmosphere, such as nitrogen or argon gas, to prevent the reaction of lithium with water or air. The solvent, THF, is used to dissolve the lithium acetylide product and to prevent the formation of side products.

The preparation of lithium acetylide is an important step in organic synthesis, as it can be used as a strong base for various reactions, such as alkylations, acylations, and reductions. The reactivity of lithium acetylide makes it a useful tool for organic chemists.

To know more about organic synthesis, refer to the link below:

https://brainly.com/question/30757552#

#SPJ11

Nitrobenzene is a chemical compound with the molecular formula C6H5NO2. It is a pale yellow oily liquid with a sweet almond-like odor.

Nitrobenzene is widely used in the production of aniline, which is used in the manufacture of dyes, pharmaceuticals, and rubber chemicals. It is also used as a solvent for cellulose esters, resins, and oils, as well as a flavoring agent in the food industry. Despite its many uses, nitrobenzene is toxic and can cause harm to humans and the environment. It is classified as a Category 2 carcinogen and can cause damage to the liver, kidney, and central nervous system. Exposure to nitrobenzene can occur through inhalation, ingestion, or contact with the skin. Therefore, it is important to handle nitrobenzene with care and follow proper safety procedures when working with this compound. In summary, nitrobenzene is a widely used chemical compound with many industrial applications. However, due to its toxic nature, precautions must be taken when handling it to ensure the safety of individuals and the environment.

Learn more about Nitrobenzene here

https://brainly.com/question/14748502

#SPJ11

The reaction that correctly shows the balanced equation is Na₂CO₃ = CO₂ + Na₂O (option B).

A chemical reaction is a process, typically involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.

A chemical equation is said to be balanced when the number of atoms of each element on both sides of the equation are the same.

According to this question, sodium carbonate is said to release carbon dioxide when decomposed by heating.

The balanced chemical equation for the decomposition is as follows:

Na₂CO₃ = CO₂ + Na₂O

Learn more about balanced equation at: https://brainly.com/question/28294176

#SPJ1

The balanced redox reaction equation is;

(Fe)3+ + NO2 + H2O → (Fe)2+ + NO3- + 2 H+

A chemical reaction in which electrons are moved between two species is an oxidation-reduction reaction, often known as a redox reaction. The words "reduction" and "oxidation," which describe the two half-reactions that occur in a redox reaction, are the origins of the term "redox."

In a redox reaction, one species loses electrons (becomes oxidized) and gains electrons (becomes reduced). It is possible to illustrate this electron transfer via half-reactions, in which the oxidizing agent receives electrons while the reducing agent loses them.

Learn more about balanced redox reaction:https://brainly.com/question/13293425

#SPJ1

We need to use the equilibrium equation for SO2 in water:

SO2 (g) + H2O (l) ⇌ H+ (aq) + HSO3- (aq)

The equilibrium constant (Kh) for this reaction at 25°C is 1.55 x 10^-2 M/atm. We can use this equation to calculate the expected pH of rainwater in equilibrium with SO2:

Kh = [H+][HSO3-]/[SO2]

We can assume that the initial concentration of SO2 is 100 ppbv, which is equivalent to 0.1 parts per million (ppm) or 0.0001 atm. Let x be the concentration of H+ and HSO3- ions in equilibrium. Then:

1.55 x 10^-2 = x^2 / (0.0001 - x)

Solving for x, we get:

x = 4.4 x 10^-4 M

The pH of this solution can be calculated using the equation:

pH = -log[H+]

pH = -log(4.4 x 10^-4)

pH = 3.36

Therefore, the expected pH of rainwater in equilibrium with 100 ppbv of SO2 is 3.36. This is significantly lower than the pH of rainwater in equilibrium with CO2, which was 5.63. This indicates that SO2 is a much stronger acid than CO2, and can have a more significant impact on the acidity of rainwater in polluted environments.

Learn more about  equilibrium here:

https://brainly.com/question/30807709

#SPJ11

Molarity is the number of moles of solute per liter of solution, while ppm is the mass of solute per million parts of the solution.

Fixation is a proportion of how much solute disintegrated in a dissolvable. Two familiar approaches to communicating focus are molarity and parts per million (ppm).

Molarity is characterized as the quantity of moles of solute broke up in one liter of arrangement. It is addressed by the image M and is determined as follows:

M = moles of solute/volume of arrangement (in liters)

For instance, on the off chance that 0.5 moles of NaCl is disintegrated in 1.0 L of water, the molarity of the arrangement would be:

M = 0.5 mol/1.0 L = 0.5 M

Parts per million (ppm) is a unit of fixation that communicates the proportion of the mass of solute to the mass of the arrangement, duplicated by 1,000,000. It is addressed by the image ppm and is determined as follows:

ppm = (mass of solute/mass of arrangement) x [tex]10^6[/tex]

For instance, on the off chance that 0.1 g of lead is disintegrated in 1.0 L of water, the ppm of lead in the arrangement would be:

ppm = (0.1 g/1000 g) x [tex]10^6[/tex] = 100 ppm

Molarity and ppm are both valuable approaches to communicating focus and are utilized in different fields, including science, science, and natural science. It is vital to comprehend how to ascertain and switch between these units of focus over completely to precisely plan and examine arrangements in the research facility.

To learn more about ppm, refer:

https://brainly.com/question/24491982

#SPJ4

The complete question is:

SOLUTION CONCENTRATION WORKSHEET 1) If you dissolve 8.56 grams of sodium chloride in 25.09 grams of water, calculate the percent (m/m), of sodium chloride. [25.4%) 2) Calculate the molarity of a solution that contains 18.9 grams of sodium hydroxide in 3.67 L of solution. [O. 13mol/L) 3) How many moles of potassium hydroxide are in 4.82 mL of a 0.050 M solution of potassium hydroxide? [0.000241 mol) 4) If 35 g of copper (II) chloride is placed in 140 mL of water, what will be the percent (m/v) of the solution? (25%) 5) The (m/m)% of silver in sterling silver alloys is 92.5%. What mass of pure silver is found in a ring that has a mass of 6.45 g? [5.97g] 6) Health Canada's guideline for the maximum mercury content in commercial fish is 0.5 ppm. When a 1.6 kg salmon was tested, it was found to contain 0.6 mg of mercury. Would this salmon be safe to eat? [0.4ppm;salmon is safe to eat] 7) A saline solution contains 0.90 g of sodium chloride, dissolved in 100 mL of solution. What is the molar concentration of the solution? [0.15 mol/L) 8) Calculate the mass of solute needed to make 250 mL of a 0.50 M solution of NH,CI [6.79] 8) Calculate the mass of solute needed to make 250 mL of a 0.50 M solution of NH,CI [6.79] 9) A solution is made by mixing 50.0mL of ethanol with 50.0mL of water. Determine the percent by mass (m/m) of ethanol in this solution. The densities of ethanol and water are 0.789g/mL and 1.00g/mL respectively [44.1% m/m ethanol] 10) Calculate the molarity of a solution containing 0.750mol of HCI in 335mL of solution. [2.24 mol HCI/L) 11) Calculate the molarity of a solution that contains 13.5g of sodium sulphate in 850mL of solution. [O .112M Na So.] 12) A laboratory experiment calls for 0.300M KOH solution. Calculate the number of moles of KOH that would be in 150mL of the solution [0.0450 mol KOH] 13) Calculate the number of grams of solute in 150mL of 0.30M NaOH. [1.8gNaOH) 14) How many liters of 0.10M aluminum chloride will contain 0.45 mol of chloride ion? [1.5L] 15) If you had a 1.25M solution of hydrochloric acid, how much of it would you have to use to make 1.5L of a 0.25M solution? [300mL].

The Ksp value for MgSO₃ is 5.5×10−21. The concentration of Mg²⁺ in solution is 8.9×10−11 M. To generate a precipitate, the concentration of SO₂⁻³ must exceed 6.2×10−11 M.

Ksp refers to the solubility product constant  that provides equilibrium constant for the dissolution of a particular solid substance into an aqueous solution. It projects the level at which a solute dissolves in solution. The greater the Ksp value of a substance.
It places  a mathematical relationship that states how the concentrations of the products differentiate with the concentration of the reactants. Furthermore, subscripts are placed to the equilibrium constant symbol K, such as K eq, K c, K p, K a, K b, and K sp.

To learn more about ksp
https://brainly.com/question/27964828
#SPJ4

Answer:

C₁₈H₃₆O₂ (s) + 26O₂ (g) --> 18CO₂ + 18H₂O

Explanation:

Remember, combustion is the bombardament of a hydrocarbon (a compound which only contains hydrogen and carbon atoms) with excess oxygen.

The general formula for combustion reactions is:

__ CₓHₐ + __O₂ (g) --> __ CO₂ (g) + __H₂O

1. Start with the base equation before trying to balance the number of atoms on the reactant and product side. Using the general formula for combustion reactions, we know the foundations for this equation

__ C₁₈H₃₆O₂ (s) + ___ O₂ --> ___CO₂ (g) + __ H₂O (g)

2. Now, start balancing atoms by choosing the element which only appears once (not in multiple compounds) on each side of the reaction.

In this case, C is an element which is only on each side once.

To balance C atoms, both sides have to have 18 Carbons, so place 18 in front of C on the product side.

__ C₁₈H₃₆O₂ (s) + ___ O₂ --> _18_CO₂ (g) + __ H₂O (g)

Similarly, now we must balance H atoms. Since there are originally 36 atoms of hydrogen in the reactants, and because H has a subscript of 2, place an 18 in front of the H (2*18=36 total)

__ C₁₈H₃₆O₂ (s) + ___ O₂ --> _18_CO₂ (g) + _18_ H₂O (g)

Now that carbon and hydrogen are balanced on either side, the last step is to balance the number of oxygen atoms.

On the product side, the number of oxygen atom totals 54 ( 18 O₂ --> 36 O atoms and 18 O in 18H₂O).

Since there is already two oxygen atoms in stearic acid, balance the O₂ with the number 52 (54 Oxygen atoms total - 2 =52). Since oxygen is a diatomic atom, there are two oxygens in the molecule. This means we can divide 52 by 2 to get 26.

__ C₁₈H₃₆O₂ (s) + _26_ O₂ --> _18_CO₂ (g) + _18_ H₂O (g)

This equation is balanced. Check the amount of each atom on the reactant and product side to double check:

REACTANT SIDE:

C: 18 (seen in the subscript)

H: 36 (seen in the subscript)
O: 54 (2 + (26*2))

PRODUCT SIDE:

C: 18
H: 36 (18 *2 H = 36)
O: 54 ((18*2 O) + 18))

The balanced equation for the complete combustion of stearic acid is:

C18H36O2 + 25O2 → 18CO2 + 18H2O

For more such question on stearic acid

https://brainly.com/question/28669474

#SPJ11