Answer: 1. F
2. F
3. T
4. F
5. T
6. T
Explanation:
I am not sure i'm sorry if it isn't right
TRUE OR FALSE
Astronomers use spectroscopes to identify elements in stars because each element produces
unique emission spectrum
Answer:
True!
Explanation:
A spectrum is simply a chart or a graph that shows the intensity of light being emitted over a range of energies. Have you ever seen a spectrum before? Probably. Nature makes beautiful ones we call rainbows. Sunlight sent through raindrops is spread out to display its various colors (the different colors are just the way our eyes perceive radiation with slightly different energies).
Hope i helped!
Which action could a student take to produce a longitudinal wave with a large amplitude
Answer:
bang on a drum
Explanation:
Answer:
Bang on drum
Explanation:
Its right.
State one type of additional information that could be used to determine if these three species are closely related.
Answer:
Study the bone structure of limbs.
Explanation:
Study the bone structure of limbs can be used to find out the relatedness and relationship among three species because the pattern of bones structure is similar but the structure is different from one another due to different environmental conditions. This study provides important and useful information whether the three species are closely related or not. If they have similar bone structure than we can say that there are more chances that they are closely related to each other.
plz answer all questions, no links or i'll report
Answer:its c and d
Explanation:
How do plants and animals rely on each other?
Answer:
b
Explanation:
How do properties of water break down rocks?
Answer:
Explanation:
Freezing water can break rock without any change in the minerals that form the rock (physical weathering). This usually produces small particles and sand. Water with dissolved gases and other chemicals causes the minerals in rocks to be changed, leading to the deterioration of the rock (chemical weathering).
chemical weathering
Explanation:
freezing water when mix with it cause detorilation of rocks
The pressure in a car tire is 178 kPa at 37°C. After a long drive, the pressure is 275 kPa. What is
the new temp of the air in the tire, assuming the volume is constant?
Answer:
T₂ = 478.93 K
Explanation:
Given that,
Initial pressure, P₁ = 178 kPa
Initial temperature, T₁ = 37°C = 310 K
Final pressure, P₂ = 275 kPa
We need to find the new temp of the air in the tire, assuming the volume is constant. We know that,
[tex]\dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}\\\\T_2=\dfrac{P_2T_1}{P_1}\\\\T_2=\dfrac{275\times 310}{178}\\\\T_2=478.93 K[/tex]
So, the new temperature is equal to 478.93 K.
How many sulfur dioxide
molecules are in 2.8 moles of
sulfur dioxide?
?]
[?]x10?
In general, what happens when a subscript is found
outside of parentheses?
Answer:
you multiply it by the other subscripts in the parenthesis.
Explanation:
10. Air is a homogenous mixture of gases. Oxygen is 20% by volume of air typically. What
amount of moles of oxygen is present in 20 L of air at STP?
Answer:
893 moles
Explanation:
An ideal gas at STP occupies 22.4 liters. Calculating Oxygen as if it were an ideal gas there are . 893 moles of Oxygen in 20.0 liters.
A3.00 mol sample of CO2 (g) is in a rigid 6.00 L container at 400.°C.
Which of the following is the pressure of the gas?
16.4 atm
27.6 atm
200. atm
995 atm
Answer:
i'm thinking 27.6 not sure
Explanation:
An aerosol can contains gases under a pressure
of 4.4 atm at 26 ◦C. If the can is left on a
hot sandy beach, the pressure of the gases
increases to 4.68 atm. What is the Celsius
temperature on the beach?
Answer in units of ◦C.
Answer:
e
Explanation:
and e
someone pls answer i will in fact give u brainliest
Answer:
d. Solid
Explanation:
It is frozen to be a glacier
Hope this helps :)
A 4.00g sample of gas is found to exert a pressure of 1.71 atm when confined in 3.60L container at a temperature of 24
Answer:
There are 0.311 moles of gas in the tank
Explanation:
Complete question
A 4.00g sample of gas is found to exert a pressure of 1.71 atm when confined in 3.60L container at a temperature of 241 K. Find the number of moles of the gas
Solution
As we know
[tex]PV = nRT[/tex]
where P is the pressure of the gas in atm
V is the volume in liters
n is the number of moles
R is the gas constant = 0.08206 L·atm/K·mol
and T is the temperature in Kelvin
Substituting the given values in above equation, we get -
[tex]1.71 * 3.60 = n * 0.08206 * 241\\n = 0.311[/tex]
There are 0.311 moles of gas in the tank
Deforestation affects which of the following?
O none of the cycles
Owater cycle and carbon cycle
O carbon cycle only
O water cycle only
Answer:
water cycle and carbon cycle
PLEASE HELP QUICKLY!! How many moles of NH4OH are in 0.125L of a 1.4 M solution of NH4OH?
Answer:
0.175mol
Explanation:
Molarity of a solution can be calculated thus:
Molarity (M) = number of moles (n) / volume (V)
According to the information provided in this question, volume of NH4OH = 0.125L, molarity = 1.4M
Using; Molarity = n/V
1.4 = n/0.125
n = 0.175mol
Rubidium Rb
when was the element discovered and by whom ??? ASAP MAKE IT AT LEAST A PARAGRAPH!!!
Answer:
Rubidium Rb was discovered in 1861It was discovered by the German chemist Robert Wilhelm Bunsen and the German physicist Gustav-Robert KirchoffExplanation:
Rubidium was discovered by the German chemists Robert Bunsen and Gustav Kirchhoff in 1861 while analyzing samples of the mineral lepidolite with a device called a spectroscope. The sample produced a set of deep red spectral lines they had never seen before. Bunsen was eventually able to isolate samples of rubidium metal. Today, most rubidium is obtained as a byproduct of refining lithium.
the process shown was used by Mendel during his experiments. What is the process called?
Answer: cross-pollination
Explanation:
In any engineering design problem, the first step is to understand the problem and identify one or more possible solutions. In this task, you’ll analyze the problems you face as the chemical engineer challenged with setting up the ammonia-making process. Recall the chemical equation for producing ammonia:
N2 + 3H2 ⇌ 2NH3 + energy
2.How can you change the chemical equilibrium to benefit the company? What benefits will be realized?
Answer:
Explanation:
2NH3(g)(→ N2(g)(+(3H2(g)
Eventually, these two reactions occur at the same rate. When this happens,
the concentrations of nitrogen, hydrogen, and ammonia become constant, and the
system is said to be “at equilibrium”. Typically,
we represent chemical equilibrium
using a double-headed reaction arrow:
8.2 moles of ethanol is boiled, how much energy was required to do so?
AH fus=4.60 kJ/mol
AHvap=43.5 kJ/mol
Answer:
Explanation:
Understand that a substance's specific heat (C) is a property that can be used to ... Calculate the heat required to melt 25.7 g of solid methanol at its melting point. ... How many moles of NH4NO3 must be dissolved in water so that 88.0 kJ of heat ... to vaporize 54.0 g of ethanol (C2H5OH) if AHvap for ethanol = 43.5. kJ/mol?
What fossil helped support Wegener's hypothesis of continental drift?
A. Gondwanaland
B. Kannemeyerid
C. Mesosaurus
D. Glossopteris
Answer:
Glossopteris
Explanation:
Glossopteris is a fossil fern that helped support Wegener's hypothesis.
Hope this helps! Have a great day!
Heat from the sun is absorbed by the _____?
Answer:
earth
Explanation:
When the equation H202 + H2O + O2 is completely balanced, the SUM of all the coefficients will be
A.5
B. 8
C.3
D.4
Five liters of air at -35°C is warmed to 89°C. What is the new volume if the pressure remains constant
Answer:
7.61 liters
Explanation:
From the question,
Applying Charles law formula,
V₁/T₁ = V₂/T₂...................... Equation 1
Where P₁ = initial volume of of air, V₂ = Final volume of air, T₁ = Initial Temperature of air, T₂ = Final Temperature of air.
make V₂ the subject of the equation
V₂ = (V₁×T₂)/T₁............... Equation 2
Given: V₁ = 5 liters, T₁ -35 °C = (-35+273) K = 238 K, T₂ = 89°C = (89+273) K = 362 K
Substitute these values into equation 2
V₂ = (5×362)238
V₂ = 1810/238
V₂ = 7.61 liters
No links.
Calculate the pH and pOH of each solution.
a) [H + ] = 1.7 x 10 -8M
b) [H + ] = 1.0 x 10 -7M
Explanation:
first find the value of Ph
from Ph= -log[H+]
ph=-log[1.7x10^-8]=7.769
find Poh from 14=ph+poh
14=7.769+poh
Poh=6.231 part a
for part b the same as part a from the above procedure
What quantity of copper is deposited by the same quantity of electricity that deposited 9g of aluminum
Answer:
Mass of copper deposited = 31.75 g
Explanation:
According to Faraday's second law of electrolysis, when the same quantity of electricity is passed through different electrolytes, the relative number of moles of the elements deposited are inversely proportional to the charges on the ions of the elements.
From this law, it can be seen that the higher the charge, the lower the number of moles of a given element deposited.
Number of moles of aluminium in 9 g of aluminium = mass / molar mass
Molar mass of aluminium = 27 g
Number of moles of aluminium = 9/27 = 1/3 moles
Charge on aluminium ion = +3
3 moles of electrons will discharge 1 mole of aluminium,
1 mole of electrons will discharge 1/3 moles of aluminium
Number of moles of electrons involved = 1 mole of electrons
Charge on copper ion = +2
1 mole of electrons will discharge 1/2 moles of copper.
Mass of 1/2 moles of copper = number of moles × molar mass of copper
Molar mass of copper = 63.5 g
Mass of copper deposited = 1/2 × 63.5 = 31.75 g
When balancing chemical equations, it is okay to adjust
(3 points)
A.
coefficients.
B.
superscripts.
C.
subscripts.
D.
any of these.
Answer:
A
Explanation:
Thats the correct anwers
The velocity of an object consists of its speed and..
A. Average speed
B. Distance
C. Displacement
D. Direction
Answer:
direction
Explanation:
what is modal class?
தமிழ் வாழ்க
Answer:
Modal means the one that occurs most often (averages: mode). In maths, the mode is one of the most common ways to describe a set of data. ... The modal class is, therefore, the group with the highest frequency.
Answer:
Modal means the one that occurs most often (averages: mode). In maths, the mode is one of the most common ways to describe a set of data. ... The modal class is, therefore, the group with the highest frequency. For example: if you counted the number of pencils in different pencil cases and you decided to group them.
Explanation:
தமிழன் ❤
_____________ is the force or pressure of electricity and is compared to the amount of water pressure in a hose.
Answer:
Voltage.
Explanation:
Voltage is the force or pressure of electricity and is compared to the amount of water pressure in a hose.
Answer:
Voltage is the force or pressure of electricity and is compared to the amount of water pressure in a hose.